Preliminary Datasheet CR05AM-16A R07DS0988EJ0200 Rev.2.00 Aug 25, 2015 800V-0.3A-Thyristor Low Power Use Features IT (AV) : 0.3 A VDRM : 800 V IGT : 100 RoHS Compliant Non-Insulated Type Planar Passivation Type Halogen-free package (PRSS0003DJ-A) Completely Pb-free package (PRSS0003DJ-A) Outline RENESAS Package code: PRSS0003EA-A PRSS0003DJ-A (Package name: TO-92*) (Package name: TO-92) 2 1. Cathode 2. Anode 3. Gate 3 3 2 3 1 1 2 1 Applications Leakage protector, timer, and gas igniter Maximum Ratings Parameter Symbol Repetitive peak reverse voltage Non-repetitive peak reverse voltage DC reverse voltage Repetitive peak off-state voltage Note1 Non-repetitive peak off-state voltage Note1 DC off-state voltage Note1 VRRM VRSM VR(DC) VDRM VDSM VD(DC) Voltage class 16 800 960 640 800 960 640 Unit V V V V V V Notes: 1. With gate to cathode resistance RGK = 1 k R07DS0988EJ0200 Rev.2.00 Aug 25, 2015 Page 1 of 8 CR05AM-16A Parameter RMS on-state current Average on-state current Surge on-state current I2t for fusing Peak gate power dissipation Average gate power dissipation Peak gate forward voltage Peak gate reverse voltage Peak gate forward current Junction temperature Storage temperature Mass R07DS0988EJ0200 Rev.2.00 Aug 25, 2015 Preliminary Symbol IT(RMS) IT(AV) Ratings 0.47 0.3 Unit A A ITSM 10 A I2t 0.4 A2 s PGM PG(AV) VFGM VRGM IFGM Tj Tstg -- 0.5 0.1 6 6 0.3 - 40 to +125 - 40 to +125 0.23 W W V V A C C g Conditions Commercial frequency, sine half wave 180 conduction, Ta = 62C 60 Hz sine half wave, 1 full cycle, peak value, non-repetitive Value corresponding to 1 cycle of half wave 60 Hz, surge on-state current Typical value Page 2 of 8 CR05AM-16A Preliminary Electrical Characteristics Parameter Repetitive peak reverse current Repetitive peak off-state current Symbol IRRM IDRM Min. -- -- Typ. -- -- Max. 0.1 0.1 Unit mA mA On-state voltage VTM -- -- 1.8 V Gate trigger voltage Gate non-trigger voltage VGT VGD -- 0.2 -- -- 0.8 -- V V IGT IH Rth(j-a) 1 Note2 -- -- -- -- -- 100 Note2 3 180 A mA C/W Gate trigger current Holding current Thermal resistance Test conditions Tj = 125C, VRRM applied Tj = 125C, VDRM applied RGK = 1 k Tj = 25C, ITM = 4 A instantaneous value Tj = 25C, VD = 6 V, IT = 0.1 A Note2 Tj = 125C, VD = 1/2 VDRM RGK = 1 k Tj = 25C, VD = 6 V, IT = 0.1 A Note2 Tj = 25C, VD = 12 V, RGK = 1 k Junction to ambient Notes: 2. If special values of IGT are required, choose item D or E from those listed in the table below if possible. Item D E IGT (A) Notes: 3. 1 to 50 20 to 100 The above values do not include the current flowing through the 1 k resistance between the gate and cathode. IGT, VGT measurement circuit. A1 3V DC IGS IGT A3 A2 RGK 1 1k Switch 2 60 TUT V1 6V DC VGT Switch 1 : IGT measurement Switch 2 : VGT measurement (Inner resistance of voltage meter is about 1k) R07DS0988EJ0200 Rev.2.00 Aug 25, 2015 Page 3 of 8 CR05AM-16A Preliminary Performance Curves Maximum On-State Characteristics 10 Surge On-State Current (A) Ta = 25C 100 10-1 10-2 0 1 2 3 x 100 (%) IGT = 100A (Tj = 25C) VGD = 0.2V 10-1 100 IFGM = 0.3A 101 102 103 Typical Example 102 101 100 -40 0 40 80 120 160 Junction Temperature (C) Gate Trigger Voltage vs. Junction Temperature Maximum Transient Thermal Impedance Characteristics (Junction to ambient) 1.0 Gate Trigger Voltage (V) 102 Gate Current (mA) Transient Thermal Impedance (C/W) Gate Voltage (V) VGT = 0.8V (Tj = 25C) 0.8 Typical Distribution 0.6 Typical Example 0.2 0 -40 101 Gate Trigger Current vs. Junction Temperature VFGM = 6V 0.4 2 Gate Characteristics PG(AV) = 0.1W 10-1 4 Conduction Time (Cycles at 60Hz) PGM = 0.5W 100 6 On-State Voltage (V) 102 101 8 0 100 4 Gate Trigger Current (Tj = tC) Gate Trigger Current (Tj = 25C) On-State Current (A) 101 Rated Surge On-State Current 0 40 80 120 Junction Temperature (C) R07DS0988EJ0200 Rev.2.00 Aug 25, 2015 160 100 200 101 102 103 10-2 10-1 100 160 120 80 40 0 10-3 Time (s) Page 4 of 8 CR05AM-16A Preliminary Allowable Ambient Temperature vs. Average On-State Current (Single-Phase Half Wave) Maximum Average Power Dissipation (Single-Phase Half Wave) 160 = 30 0.3 0.2 360 0.1 0 Resistive, inductive loads 0 0.1 0.2 0.4 0.3 120 360 Resistive, inductive loads Natural convection 100 80 60 40 = 30 90 180 60 120 20 0 0.5 0 0.1 0.2 0.4 0.3 0.5 Average On-State Current (A) Maximum Average Power Dissipation (Single-Phase Full Wave) Allowable Ambient Temperature vs. Average On-State Current (Single-Phase Full Wave) 60 = 30 0.4 120 90 160 180 0.3 0.2 0.1 360 0 Ambient Temperature (C) Average Power Dissipation (W) 140 Average On-State Current (A) 0.5 Resistive loads 0 0.1 0.2 0.4 0.3 140 120 360 Resistive loads Natural convection 100 80 60 40 20 0 0.5 = 30 60 90 120 180 0 0.1 0.2 0.4 0.3 0.5 Average On-State Current (A) Average On-State Current (A) Maximum Average Power Dissipation (Rectangular Wave) Allowable Ambient Temperature vs. Average On-State Current (Rectangular Wave) 0.5 Average Power Dissipation (W) Ambient Temperature (C) 0.4 180 120 90 60 0.4 = 30 270 180 120 90 DC 60 0.3 0.2 360 0.1 0 Resistive, inductive loads 0 0.1 0.2 0.3 0.4 Average On-State Current (A) R07DS0988EJ0200 Rev.2.00 Aug 25, 2015 0.5 160 Ambient Temperature (C) Average Power Dissipation (W) 0.5 Resistive, inductive loads Natural convection 140 360 120 = 30 60 100 90 120 180 270 DC 80 60 40 20 0 0 0.1 0.2 0.3 0.4 0.5 Average On-State Current (A) Page 5 of 8 Preliminary 140 120 100 80 60 40 20 0 -40 0 40 80 120 160 160 Typical Example Tj = 125C RGK=1k 140 120 100 80 60 40 20 0 0 10 101 102 103 Rate of Rise of Off-State Voltage (V/s) Holding Current vs. Junction Temperature Repetitive Peak Reverse Voltage vs. Junction Temperature VD=12V RGK=1k Holding Current (mA) Breakover Voltage vs. Rate of Rise of Off-State Voltage Junction Temperature (C) 102 101 Typical Distribution 100 Typical Example 10-1 -40 Breakover Voltage (dv/dt = vV/s) Breakover Voltage (dv/dt = 1V/s) RGK = 1k Typical Example 0 40 80 120 160 Junction Temperature (C) x 100 (%) 160 Repetitive Peak Reverse Voltage (Tj = tC) Repetitive Peak Reverse Voltage (Tj = 25C) Breakover Voltage (Tj = tC) Breakover Voltage (Tj = 25C) x 100 (%) Breakover Voltage vs. Junction Temperature x 100 (%) CR05AM-16A 160 Typical Example 140 120 100 80 60 40 20 0 -40 0 40 80 120 160 Junction Temperature (C) Gate Trigger Current vs. Gate Current Pulse Width 104 Gate Trigger Current (A) Typical Example Ta = 25C 103 102 101 1 10 102 103 Gate Current Pulse Width (s) R07DS0988EJ0200 Rev.2.00 Aug 25, 2015 Page 6 of 8 CR05AM-16A Preliminary Package dimensions Package Name TO-92* JEITA Package Code SC-43A RENESAS Code PRSS0003EA-A Previous Code T920 MASS[Typ.] 0.23g Unit: mm 5.0Max 11.5Min 5.0Max 4.4 1.25 1.25 3.6 1.1 Circumscribed circle 0.7 JEITA Package Code RENESAS Code Previous Code MASS (Typ) [g] SC-43A PRSS0003DJ-A TO-92 0.23 Unit: mm +0.25 14.47 0.4 4.58 0.2 4.58 -0.15 +0.10 0.46 0.1 0.38 -0.05 (3.86 MAX) 1.02 0.1 1.27 R07DS0988EJ0200 Rev.2.00 Aug 25, 2015 Page 7 of 8 CR05AM-16A Preliminary Ordering Information Orderable Part Number CR05AM-16A#B00 CR05AM-16A#BD0 Package Packing Note TO-92* Plastic Bag TO-92 Plastic Bag Quantity 500 pcs. 1000 pcs. Remark Straight type Straight type, Halogen-free Note : Please confirm the specification about the shipping in detail. R07DS0988EJ0200 Rev.2.00 Aug 25, 2015 Page 8 of 8 Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2801 Scott Boulevard Santa Clara, CA 95050-2549, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 9251 Yonge Street, Suite 8309 Richmond Hill, Ontario Canada L4C 9T3 Tel: +1-905-237-2004 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-6503-0, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333 Tel: +86-21-2226-0888, Fax: +86-21-2226-0999 Renesas Electronics Hong Kong Limited Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2265-6688, Fax: +852 2886-9022 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949 Tel: +65-6213-0200, Fax: +65-6213-0300 Renesas Electronics Malaysia Sdn.Bhd. Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics India Pvt. Ltd. No.777C, 100 Feet Road, HALII Stage, Indiranagar, Bangalore, India Tel: +91-80-67208700, Fax: +91-80-67208777 Renesas Electronics Korea Co., Ltd. 12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 (c) 2015 Renesas Electronics Corporation. All rights reserved. Colophon 5.0