D.. AP Vishay Thick Film, Rectangular Chip Resistors for Conductive Gluing FEATURES * * * * AgPd-Terminations for conductive gluing Protective overglaze Metal glaze on high quality ceramic Compliant with "Restriction of the use of Hazardous Substances" (RoHS) directive 2002/95/EC (issue 2004) * Excellent stability (R/R 1 % for 1000 h at 70 C) STANDARD ELECTRICAL SPECIFICATIONS SIZE MODEL INCH METRIC D10 AP 0402 POWER RATING P70 C W LIMITING ELEMENT VOLTAGE MAX. V 0.063 50 RESISTANCE TEMPERATURE RANGE COEFFICIENT TOLERANCE % ppm/K 100 200 1005 E-SERIES 1 5 100R - 10M 10R - 10M 24 + 96 24 1 5 18R - 10M 3R6 - 10M 24 + 96 24 1 5 18R - 10M 3R6 - 10M 24 + 96 24 1 5 18R - 10M 3R6 - 10M 24 + 96 24 Zero-Ohm-Resistor: Rmax. < 200 m, Imax. = 0.5 A 0.1 D11 AP 0603 100 200 75 1608 Zero-Ohm-Resistor: Rmax. < 200 m, Imax. = 0.7 A 0.125 D12 AP 0805 100 200 150 2012 Zero-Ohm-Resistor: Rmax. < 200 m, Imax. = 0.8 A 0.25 D25 AP 1206 100 200 200 3216 Zero-Ohm-Resistor: Rmax. < 200 m, Imax. = 1 A Notes * These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional time. * Marking and packaging: See appropriate catalog or web pages * Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material TECHNICAL SPECIFICATIONS PARAMETER UNIT D10 AP D11 AP D12 AP D25 AP W 0.063 0.10 0.125 0.25 V 50 75 150 200 Insulation Voltage (1 min) Vpeak > 75 > 100 > 200 > 300 Thermal Resistance (1) K/W 870 550 440 220 5.5 10 Rated Dissipation at 70 C (3) Limiting Element Voltage (2) Insulation Resistance Category Temperature Range C - 55 to + 155 Failure Rate h-1 0.3 x 10- 9 Weight/1000 pieces g > 0.65 109 2 Notes (1) Measuring conditions in acc. to EN 140401-802 (2) (3) Rated voltage: PxR The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 C is not exceed. www.vishay.com 1 For technical questions, contact: filmresistors.thickfilmchip@vishay.com Document Number: 20038 Revision: 02-Sep-08 D.. AP Thick Film, Rectangular Chip Resistors for Conductive Gluing Vishay PART NUMBER AND PRODUCT DESCRIPTION D.. AP - SERIES Part Numbering: D1208058B5620FP5 (1) D 1 2 0 8 0 5 8 B 5 6 2 0 F P 5 MODEL/SIZE SPECIAL CHARACTER TCR VALUE TOLERANCE PACKAGING (2) SPECIAL D100402 D110603 D120805 D251206 8 = AgPd terminations for conductive glueing B = 100 ppm/K A = 200 ppm/K 0 = Jumper 3 digit value 1 digit multiplier MULTIPLIER 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 5 = *105 6 = *106 0000 = Jumper F=1% J=5% 0 = Jumper P0 P5 PN PZ B5 BN Up to 2 digits Product Description: D12 AP 100 562R 1 % P5 D12 AP 100 562R 1% P5 BVxxxx MODEL TCR RESISTANCE VALUE TOLERANCE PACKAGING (2) SPECIAL (3) D10 AP D11 AP D12 AP D25 AP 100 ppm/K 200 ppm/K 49K9 = 49.9 k 5R1 = 5.1 0R0 = Jumper 1% 5% P0 P5 PN PZ B5 BN Customized part number is available on request Notes (1) Preferred way for ordering products is by use of the PART NUMBER (2) Please refer to table PACKAGING, see below (3) Detailed BV Number will appear on the Packaging Label PACKAGING REEL MODEL TAPE WIDTH D10 AP D11 AP D12 AP D25 AP 8 mm 8 mm 8 mm 8 mm PACKAGING CODE DIAMETER PITCH PIECES/REEL 180 mm/7" 2 mm 10 000 P0 330 mm/13" 2 mm 50 000 PZ 180 mm/7" 4 mm 5000 P5 255 mm/10" 4 mm 10 000 P0 330 mm/13" 4 mm 20 000 PN BN 180 mm/7" 4 mm 5000 P5 B5 255 mm/10" 4 mm 10 000 P0 330 mm/13" 4 mm 20 000 PN BN 180 mm/7" 4 mm 5000 P5 B5 255 mm/10" 4 mm 10 000 P0 330 mm/13" 4 mm 15 000 330 mm/13" 4 mm 20 000 PAPER (4) BLISTER B5 BN PN Note (4) Flame treated paper for sizes D10 and D11. Regular paper for sizes D12 and D25. Document Number: 20038 Revision: 02-Sep-08 For technical questions, contact: filmresistors.thickfilmchip@vishay.com www.vishay.com 2 D.. AP Thick Film, Rectangular Chip Resistors for Conductive Gluing Vishay DIMENSIONS SIZE DIMENSIONS [in millimeters] INCH METRIC L W H T1 T2 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.05 0.2 + 0.10 0603 1608 1.55 + 0.10 0.45 0.05 0.3 0.2 0.3 0.2 0805 2012 2.0 + 0.20 1.25 0.15 0.45 0.05 0.3 + 0.20 0.3 0.2 1206 3216 3.2 + 0.10 - 0.05 - 0.10 - 0.20 SIZE 0.85 0.1 1.6 0.15 - 0.10 0.55 0.05 0.45 0.2 - 0.15 0.4 0.2 GLUING PADS DIMENSIONS [in millimeters] INCH METRIC a b l 0402 1005 0.4 0.6 0.5 0603 1608 0.9 0.9 1.0 0805 2012 0.9 1.3 1.3 1206 3216 1.1 1.7 2.3 90 80 0402 0603 0805 Rated Power in % Temperature Rise in C FUNCTIONAL PERFORMANCE 1206 70 60 120 100 80 50 60 40 30 40 20 20 10 0 0.1 0.2 0.3 0.4 Power in W Non-Linearity A3 in dB Temperature Rise 120 110 100 90 80 1206 0805 0603 0402 70 60 0 - 55 0.5 - 25 0 25 50 Derating Current Noise in V/V 0 75 70 100 125 155 175 Ambient Temperature in C 100 2 040 10 3 060 5 080 6 120 50 1 40 30 20 10 0.1 100 Non-Linearity www.vishay.com 3 1K 10K 100K 1M 10M Resistance Value in 100 1K 10K Current Noise For technical questions, contact: filmresistors.thickfilmchip@vishay.com 100K 1M 10M Resistance Value in Document Number: 20038 Revision: 02-Sep-08 D.. AP Thick Film, Rectangular Chip Resistors for Conductive Gluing Vishay Pulse Load Pmax. (W) Single Pulse 1000 1206 0805 0603 0402 100 10 1 0.1 0.01-6 10 10-5 10-4 10-3 10-2 10-1 1 10 Pulse Duration t i (s) Maximum pulse load, single pulse; applicable if P 0 and n 1000 and U Umax.; for permissible resistance change equivalent to 8000 h operation Continuous Pulse Load Pmax. (W) Continuous Pulse 100 1206 0805 10 0603 0402 1 0.10 0.01 -6 10 10-5 10-4 10-3 10-2 10-1 1 10 Pulse Duration t i (s) Maximum pulse load, continuous pulses; applicable if P P (amb) and U Umax.; for permissible resistance change equivalent to 8000 h operation Pulse Voltage Umax. (V) Pulse Voltage 1400 1300 1200 1100 1000 900 800 1206 700 600 500 0805 400 300 0603 200 100 0402 0 -6 10 10-5 10-4 10-3 10-2 10-1 1 10 Pulse Duration t i (s) Maximum pulse voltage, single and continuous pulses; applicable if P Pmax.; for permissible resistance change equivalent to 8000 h operation Document Number: 20038 Revision: 02-Sep-08 For technical questions, contact: filmresistors.thickfilmchip@vishay.com www.vishay.com 4 D.. AP Thick Film, Rectangular Chip Resistors for Conductive Gluing Vishay 140 120 100 12 AP 0.. D1 P .A 1. D1 P A .. D D2 5. .A P 80 60 40 120 C s = f [r] 0 Parameter: a 100 a 0.4 40 80 C 60 C 80 60 C C 0 10 40 C 0 0.3 0.2 0.1 20 20 0 0 C 0 14 20 0 40 60 80 100 120 140 160 180 Surface temperature s in C Load in W 0.1 0h 00 0h 00 0h 0 1 00 0h 5 00 2 Resistance change [ R /R ] in % after 1000 h 0 10 0.01 0.01 R /R (t) = f [R /R (t = 1000 h)] Parameter: Time t= =2 12 r = f [P] Parameter: Size 0.5 Temperature rise r in C 140 h 00 10 10 1 Resistance change R /R % 0K 1 M 0.1 1 0M R /R [t = 1000 h] = f [s] Parameter: Resistance value 1 20 1 0.01 0.1 1 40 60 80 100 120 140 160 180 Surface temperature s in C 120 r = [C] Stability nomogram typical values (for handling see general explanations) 100 C 0 a =2 80 C 0 a =4 60 0.25 W C 0 a =6 40 0.125 W a 20 0.0625 W 00 a 1 2 3 5 7 10 2 3 Number of mounted resistors [pieces] 5 7 100 2 3 5 7 0 =8 60 80 100 =1 C C 20 a C =1 120 140 Surface temperature s [C] Power rating as a function of packaging density (guideline) www.vishay.com 5 For technical questions, contact: filmresistors.thickfilmchip@vishay.com Document Number: 20038 Revision: 02-Sep-08 D.. AP Thick Film, Rectangular Chip Resistors for Conductive Gluing Vishay TEST PROCEDURES AND REQUIREMENTS EN 60115-1 REQUIREMENTS PERMISSIBLE CHANGE (R/R) TEST (clause) STABILITY CLASS 1 OR BETTER CONDITIONS OF TEST Stability for product types: D..AP D10 AP D11 AP D12 AP D25 AP 100 to 10 M 18 to 10 M 1% 1% - Resistance (4.5) Endurance at 70 C (4.25.1) U = (P70 x U = Umax.; whichever is less severe 1.5 h ON; 0.5 h OFF; 70 C; 1000 h 1.0 % Endurance at upper category temperature (4.25.3) UCT = 125 C; 1000 h 1.0 % U = 2.5 x (P70 x R)1/2 2 x Umax.; Duration: according the style 0.25 % R)1/2 Overload (4.13) Rapid change of temperature (4.19) Damp heat, steady state (4.24) 30 min at LCT = - 55 C 30 min at UCT = 125 C; 5 cycles (40 2) C; 56 days; (93 3) % RH 0.25 % 1.0 % APPLICABLE SPECIFICATIONS * EN 60115-1 Generic Specification * EN 140400 Sectional Specification * EN 140401-802 Detail Specification * IEC 60068-2-X Variety of environmental test procedures * IEC 60286-3 Packaging of SMD components Document Number: 20038 Revision: 02-Sep-08 For technical questions, contact: filmresistors.thickfilmchip@vishay.com www.vishay.com 6 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1