Introducing the NEW PAN1321i Series Bluetooth RF Module compatible with
Apple devices such as the iPod®, iPhone® and iPad®. The PAN1321i Series
interfaces with the Apple authentication coprocessor and supports iPod
Accessory Protocol (iAP) to enable Bluetooth Serial Port data communication1
with Bluetooth enabled Apple devices. The PAN1321i Series wireless Bluetooth
connectivity also includes compatibility with Android, smart phones and most
Bluetooth enabled devices2.
This New Series of Bluetooth RF Modules is a highly integrated, cost
engineered solution for Bluetooth applications using Serial Port Profile (SPP).
The PAN1321i Series is a comprehensive Bluetooth system solution, with an
integrated controller, GPIO, AT Command Set Application Program Interface
(API), antenna, Bluetooth transceiver, SPP Profile, FCC and IC certifications and Bluetooth end product listing. Using
Panasonic’s exclusive “tiny footprint” technology, incorporating a Surface Mount Device (SMD) Land Grid Array (LGA)
package, the PAN1321i Series is just 15.6 mm by 8.7 mm! A fully shielded case protects the transceiver from nearby
RF emitters, simplifying PCB layout. The PAN1321i is qualified to the Bluetooth 2.0 standard.
The NEW PAN1321i is ideal for all applications migrating from USB or RS232 to wireless. The integrated Bluetooth
SPP is easily accessed using a simple AT command set. Evaluation and Development Kits are available.
Product Performance:
• SupportsiPodAccessoryProtocol(iAP)
• Supported Profiles: RFCOMM, SPP device A and B
• CompleteBluetooth 2.0 + EDR solution
• Dimensions:15.6 x 8.7 x 2.8 mm3
• Ultralowpowerdesign
• Certifications: Bluetooth, FCC, CE and IC
• Noexternalcomponentsneeded
• OperatingTemperatureRange:-40ºCto+85ºC
• On-modulevoltageregulator.Externalsupply2.7-3.6V
• IntegratesARM7TDMI,RAMandpatchable256k
EEPROM (for device configuration data and
application)
• BaseduponInfineon’s PMB8753/2
• Referenceclockincluded
• Lowpowerclockfrominternaloscillatororexternal
low power clock
PAN1321i Part Number:
Part Numbers Description
ENW-89811A6KF PAN1321i, Bluetooth Module v 2.0, EDR, SPP, with antenna
EVAL_PAN1321i PAN1321i Evaluation Kit
1. Apple authentication coprocessor and MFI certification is required.
2. Connectivity requires that devices support Bluetooth Serial Port Profile.
Apple, iPod, iPhone and iPad are registered trademarks of Apple Inc.
Android is trademark of Google Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corpora-
tion of North America is under license. Other trademarks and trade names are those of their respective owners.
New
Product
Introduction
Copyright © 2011 Panasonic Corporation of North America.
All Rights Reserved. Specifications are subject to change without notice.
Rev 1.0 PAN1321iNPI,FY11-076-XXX
www.panasonic.com/rfmodules
piccomponentsmarketing@us.panasonic.com
1-800-344-2112
New
Product
Introduction
NEW! PAN1321i SERIES BLUETOOTH® RF MODULE
Wireless Bluetooth Connectivity Compatible with Apple® and Android™ Devices
P
i
Design and Specications are subject to change without notice. Ask the factory for technical specications before purchase and/or use. If there is any doubt
regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1450 Rev. A
WIRELESS
MODULES
The PAN1450 provides wireless interface per the BT 1.2
specication. Interoperability and BT compliance testing have
been completed for the BT Chip ZV4301 from Zeevo, Inc. to
facilate rapid time-to-market.
The BT Chip incorporates a widely popular 32-bit ARM7TDMITM
CPU core with sufcient bandwidth to support a wide range of
embedded µController applications and the module provides
full ARM7 software development access.
The PAN1450 is manufactured in a 13,4 x 18,7 x 2,2 mm³
SMD package and the only external component needed is an
50 ohm antenna.
Any customizations for the software can be handled
with our recommended partners.
Overview
- Inquiry results with RSSI (1.2)
- Adaptive frequency hopping (AFH) enabled (1.2)
- High throughput (>600 kbps)
- Hold-, Park- and Sniffmode
- Up to 128 bit encryption
- Audio capability on an SCO channel
- Support for very low power modes - sleep and deep sleep
- All bluetooth data rates (up to 57,6/723,2Kbps)
User Interfaces
- Full-speed USB version 2.0 compliant
- Programmable baud rate UART (9,6 Kbps - 921,6 Kbps)
- Debug UART (DUART)
- 16 General Purpose I/O‘s (interruptible)
- PCM audio (1 channel)
- SPI and JTAG interface
Radio Features
- High sensitivity design (-86 dBm typ.)
- Integrated RF shield
- Class 2 module (0dBm typ. output power)
- One antenna port
FEATURES
OUTLINES - ENW89803J
P
R
O
D
U
C
T
Q
U
A
L
I
F
I
E
D
B
L
U
E
T
O
O
T
H
B01839
Bluetooth-Module PAN1450
Cut the Cable
TM
New
Product
Introduction
New
Product
Introduction
Copyright © 2011 Panasonic Corporation of North America.
All Rights Reserved. Specifications are subject to change without notice.
Rev 1.0 PAN1321iNPI,FY11-076-XXX
www.panasonic.com/rfmodules
piccomponentsmarketing@us.panasonic.com
1-800-344-2112
Applications:
• Most Wireless Applications
• Smart Phones
• Proximity
• Find Me
• Heart Rate Monitor
• Generic I/O
• HVAC
• Battery Monitor
Parameter Value Condition / Notes
Receiver Sensitivity (BER=10-3)-86dBm Ideal signal
Output Power +3 dBm @ 50 Ohm antenna pin
Power Supply 2.7-3.6V Single operation voltage
Ultra Low Power Scan 80 uA T = 25°C
ACL(Transmit3-DH1) 40mA Enhanced Data Rate, 531.2 kb/s (1)
ACL(Receive3-DH1) 37 mA Enhanced Data Rate, 531.2 kb/s (1)
Operating Temperature Range -40°Cto+85°C
Technical Specifications for PAN1321i:
Interfaces:
The PAN1321i Serial Port Profile
Interface supports:
• 3.25 MBuad UART
• General purpose I/Os with
interruptandwake-up
capabilities
• JTAG for boundary scan and
debug
Block Diagram PAN1321i:
(1) Figure indicates maximum possible data rate with this packet type. Total throughput depends on application and interface setting.
PAN1321i Init Commands
• Make Discoverable
• Register Local Service
• Auto Accept Requests
• Connect Request
• Send Stream Data
• Apple Authentication Lingo
PAN1321i
Bluetooth RF Module Series Compatibility with Apple devices Compatibility with Android devices
PAN1321i • •
PAN1321 •
Compatibility Comparison:
Apple, iPod, iPhone and iPad are registered trademarks of Apple Inc.
Android is trademark of Google Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corpora-
tion of North America is under license. Other trademarks and trade names are those of their respective owners.