Model RFP-10-100RV Rev. B Flanged Resistors 10 Watts, 100 General Specifications Resistive Element Substrate Cover Lead(s) Mounting Flange Operating Temperature Thick film Beryllium oxide ceramic Alumina Ceramic 99.99% pure Silver (.005" thk) Copper, Nickel plated per QQ-N-290 -55 to +150C (see chart) Electrical Specifications Features: * DC - 6.0 GHz 10 ohms, 5% 10 Watts DC - 6.0 GHz 0.75pF Resistance Value: Power: Frequency Range: Capacitance * 10 Watts * BeO Ceramic Notes: Tolerance is 0.010", unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Lead length 0.150" minimum.Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change without notice. * Welded Silver Leads * Non-Nichrome Resistive Element * 100% Tested Outline Drawing .116 DIA. THRU .200 .062 .100 .300 .100 .050 100 .100 .050 .105 .137 VER. 5/17/04 Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model RFP-10-100RV Rev. B Typical Performance: Suggested Mounting Procedure Power De-rating USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.