SMP1307-011LF - Skyworks Solutions

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200045H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 11, 2010 1

DATA SHEET

SMP1307 Series: Very Low Distortion Attenuator Plastic

Packaged PIN Diodes

Applications

 Very low distortion PI and TEE attenuators

 Cable TV AGC

 High-volume wireless systems

Features

 Low distortion design

 Frequency range from 5 MHz to > 2 GHz

 Packages rated MSL1 @ 260 C per JEDEC J-STD-020

Description

The SMP1307 series of plastic packaged, surface mountable, low

capacitance (0.3 pF) silicon PIN diodes is designed for attenuator

applications from 5 MHz to beyond 2 GHz.

The thick 175 μm I region width of these PIN diodes makes them

very attractive for use in very low distortion PI and TEE

attenuators commonly found in TV distribution applications. The

1.5 μs carrier lifetime of these diodes results in resistance of

100 Ω maximum at 1 mA and 10 Ω maximum at 10 mA.

The SMP1307 series is available in a selection of plastic

packages, as a single diode in the small footprint SOD-323

package, and in a variety of configurations in the SOT-23

package. Also available in an SOT-5 package (SMP1307-027) is a

four-diode array designed for insertion in commonly used four-

diode PI attenuator circuits. Table 1 describes the various

packages and marking of the SMP1307 series.

DATA SHEET • SMP1307 SERIES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

2 November 11, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200045H

Table 1. SMP1307 Series Packaging and Marking

Single Common Anode Common Cathode Series Pair Reverse Series Pair Single PI

SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOD-323

Green™ SOT-5

♦SMP1307-001

Marking: PJ1 SMP1307-004

Marking: PJ3

SMP1307-005

Marking: PJ2

SMP1307-027

Marking: PJM

♦SMP1307-001LF

Green™

Marking: RJ1

SMP1307-003LF

Green™

Marking:RJ9

SMP1307-004LF

Marking: RJ3

SMP1307-005LF

Green™

Marking: RJ2

SMP1307-006LF

Green™

Marking: RJ8

SMP1307-011LF

Marking: RJ

SMP1307-027LF

Green™

Marking: RJM

LS = 1.5 nH LS = 1.5 nH LS = 1.5 nH LS = 1.5 nH LS = 1.5 nH LS = 1.5 nH

The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as Green™. Tin/lead (Sn/Pb) packaging is not recommended

for new designs.

Innovation to Go™

Select Linear Products (indicated by ♦) now available for purchase online.

10000 pF C5

10000 pF

D1 D3

10000 pF

560 Ω

1 kΩ

RF Input RF Output

REF

(5 V)

TUNE

(0 - 20 V)

123

S1658

Figure 1. SMP1307-027 Block Diagram and Schematic

SMP1307-027 Four-Diode PI Attenuator

The SMP1307-027 uses four PIN diode junctions in a five-lead

SOT package. It is configured for ease of insertion in the PI

attenuator circuit commonly used for broadband TV distribution

systems, covering a frequency range from 5 MHz to over 1 GHz.

A broadband attenuator was designed using the SMP1307-027

that shows good performance up to 2 GHz. The attenuator was

evaluated with a 50 Ω source and load impedance. Figure 1

shows a block diagram and circuit diagram for this device (the

typical performance of the SMP1307-027 is shown in Figure 2).

Electrical and Mechanical Specifications

The absolute maximum ratings of the SMP1307 series are

provided in Table 2. Electrical specifications are provided in

Table 3. Resistance versus temperature measurements are

provided in Table 4.

Typical performance characteristics of the SMP1307 series are

illustrated in Figures 2 to 6. Package dimensions are shown in

Figures 7 to 11 (odd numbers), and tape and reel dimensions are

provided in Figures 8 to 12 (even numbers).

DATA SHEET • SMP1307 SERIES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200045H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 11, 2010 3

Package and Handling Information

Instructions on the shipping container label regarding exposure to

moisture after the container seal is broken must be followed.

Otherwise, problems related to moisture absorption may occur

when the part is subjected to high temperature during solder

assembly.

The SMP1307 series is rated to Moisture Sensitivity Level 1

(MSL1) at 260 C. It can be used for lead or lead-free soldering.

For additional information, refer to the Skyworks Application Note,

Solder Reflow Information, document number 200164

Care must be taken when attaching this product, whether it is

done manually or in a production solder reflow environment.

Production quantities of this product are shipped in a standard

tape and reel format.

Table 2. SMP1307 Series Absolute Maximum Ratings

Parameter Symbol Minimum Maximum Units

Reverse voltage VR 200 V

Power dissipation @ 25 °C lead temperature PD 250 mW

Storage temperature TSTG –65 +150 C

Operating temperature TA –65 +150 C

Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other

parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.

CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device

must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body

or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. The

SMP1307 series PIN diodes are Class 1C ESD devices.

Table 3. SMP1307 Series Electrical Specifications (Note 1)

(TA = +25 C, Unless Otherwise Noted)

Parameter Symbol Test Condition Min Typical Max Units

Reverse current IR V

R = 200 V 10 μA

Capacitance (Note 2) CT f = 1 MHz, V = 30 V 0.3 pF

Resistance RS f = 100 MHz

I = 1 mA

I = 10 mA

I = 100 mA

100

Forward voltage VF I

F = 10 mA 0.85 V

Carrier lifetime TI IF = 10 mA 1.5 μs

I region width 175 μm

Note 1: Performance is guaranteed only under the conditions listed in this Table.

Note 2: The SMP1307-027 maximum capacitance is 0.45 pF.

DATA SHEET • SMP1307 SERIES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

4 November 11, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200045H

Table 4. Resistance vs Temperature @ 100 MHz

(mA)

RS @ –55 °C

(Ω)

RS @ –15 °C

(Ω)

RS @ +25 °C

(Ω)

RS @ +65 °C

(Ω)

RS @ +100 °C

(Ω)

0.02 2386 2360 2546 2520 2440

0.10 560 598 632 633 639

0.3 203 219 236 239 242

1.0 66.1 71.2 79.3 83.6 85.4

10 9.1 10.0 10.9 12.2 12.9

20 5.6 6.0 6.6 7.4 7.8

100 2.2 2.4 2.6 3.0 3.2

Typical Performance Characteristics

–50

–40

–30

–20

–10

0 0.5 1.0 1.5 2.0

Frequency (GHz)

Attenuation (dB)

VCTL = 20 V

VCTL = 15 V

VCTL = 10 V

VCTL = 5 V

VCTL = 0 V

Figure 2. SMP1307-027 Attenuation vs Frequency

400 500 600 700 800 900 1000

0.01

0.1

100

Forward Voltage (mV)

Forward Current (mA)

Figure 4. DC Characteristic

0.01 0.1 1 10 100

Forward Current (mA)

Series Resistance (

)

0.1

100

1000

10000

Figure 3. Series Resistance vs Current @ 100 MHz

0 1 2 5 10 20 10050

0.2

0.4

0.6

0.1

0.3

0.5

0.7

0.8

Reverse Voltage (V)

Capacitance (pF)

100 MHz

1 MHz

1 GHz

Figure 5. Capacitance vs Reverse Voltage

DATA SHEET • SMP1307 SERIES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200045H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 11, 2010 5

0 500 1000 1500 2000

Frequency (MHz)

Conductance (μs)

100

150

200

250

300

350

400

0 V

10 V

40 V

Figure 6. Conductance vs Frequency and Reverse Voltage

DATA SHEET • SMP1307 SERIES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

6 November 11, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200045H

0.090 (2.29 mm) Min.

0.107 (2.72 mm) Max. 0.000 (0 mm) Min.

0.004 (0.10 mm) Max.

0.012 (0.305 mm) Min.

0.016 (0.406 mm) Max.

0.036 (0.91 mm) Min.

0.046 (1.17 mm) Max.

0.010 (0.25 mm) Min.

0.018 (0.46 mm) Max.

0.005 (0.127 mm) Min.

0.008 (0.203 mm) Max.

0.044

(1.12 mm) Min.

0.054

(1.37 mm) Max.

0.025

(0.635 mm) Min.

0.037

(0.940 mm) Max.

0.013

(0.33 mm) Min.

0.017

(0.43 mm) Max.

Cathode

Indicator

0.008 Ref.

Gauge Datum

For Foot Length

Measurement

0.060 (1.52 mm) Min.

0.070 (1.78 mm) Max.

S1619

Dimensions are in inches (millimeters shown in parentheses)

Figure 7. SOD-323 Package Dimension Drawing

S2061

4.00 ± 0.10

Cathode

Indicator

2.00 ± 0.05

0.84

8° Max

1.02

1.46 ± 0.10

0.254 ± 0.02

1.25 ± 0.05

2.90 ± 0.05

1.95 ± 0.05

4.00 ± 0.10

∅1.05 ± 0.05

∅1.50 +0.1/–0

8.00 +0.30/–0.10

3.50 ± 0.05

1.75 ± 0.10

5° Max

Notes:

1. Carrier tape: black conductive polycarbonate or polystyrene.

2. Cover tape: transparent conductive material.

3. Cover tape size: 5.5 mm width.

4. ESD surface resistivity is ≥1 x 105 ~ ≤ 1 x 1011 Ohms/square.

5. 10 sprocket hole pitch cumulative tolerance: ±0.20 mm.

6. Ao and Bo measured on plane 0.30 mm above bottom of the pocket.

7. All measurements are in millimeters.

8. Standard reel size is 7 inches. Standard reel quantity is 3000 pcs.

Figure 8. SOD-323 Tape and Reel Dimensions

DATA SHEET • SMP1307 SERIES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200045H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 11, 2010 7

0.074

(1.90 mm)

Ref.

0.118

(3.00 mm)

0.087

(2.20 mm)

0.012

(0.30 mm)

0.000

(0.00 mm)

Min.

0.122 (3.10 mm)

0.106 (2.70 mm)

0.064 (1.63 mm)

0.035 (0.90 mm)

0.020 (0.51 mm)

0.014 (0.35 mm)

0.037 (0.95 mm) Ref.

0.069

(1.75 mm)

0.052

(1.30 mm)

0.024

(0.61 mm)

0.004

(0.10 mm)

0.0104 (0.26 mm)

0.0035 (0.09 mm) Min.

0.012 (0.30 mm) Typ.

S1657

Dimensions are in inches (millimeters shown in parentheses)

Figure 9. SOT-5 Package Dimension Drawing

Notes:

1. Carrier tape: black conductive polystyrene.

2. Cover tape material: transparent conductive HSA.

3. Cover tape size: 5.40 mm width.

4. Ten sprocket hole pitch cumulative tolerance = ±0.20 mm.

5. All measurements are in millimeters.

6. Standard reel size is 7 inches. Standard reel quantity is 3000 pcs.

8.00 +0.30/–0.10

4.00 (see Note 4)

4.00 ± 0.10

3.50 ± 0.05

2.00 ± 0.05

3.15 ± 0.10 (Ao)

0.20 ± 0.03

1.75 ± 0.10

1.40 ± 0.10 (Ko)

3.20 ± 0.10 (Bo)

Pin #1

∅1.50+ 0.10/–0.00

∅1.00 Min.

S1681

R0.30 Typ

Figure 10. SOT-5 Tape and Reel Dimensions

DATA SHEET • SMP1307 SERIES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

8 November 11, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200045H

0.035 (0.89 mm) Min.

0.044 (1.12 mm) Max.

0.0005 (0.01 mm) Min.

0.004 (0.10 mm) Max.

0.012 (0.30 mm) Min.

0.020 (0.50 mm) Max.

0.003 (0.080 mm) Min.

0.008 (0.20 mm) Max.

8° Max.

0.022 (0.55 mm) Ref.

0.110 (2.80 mm) Min.

0.120 (3.04 mm) Max.

0.083 (2.10 mm) Min.

0.104 (2.64 mm) Max.

0.037 (0.95 mm) Ref.

0.047 (1.20 mm) Min.

0.055 (1.40 mm) Max.

0.076 (1.92 mm) Ref.

0.020 (0.51 mm) Ref.

S1389

Dimensions are in inches (millimeters shown in parentheses)

Figure 11. SOT-23 Package Dimension Drawing

S2259

Notes:

1. Carrier tape: black conductive polycarbonate.

2. Cover tape: transparent conductive material.

3. Cover tape size: 5.5 mm width.

4. ESD surface resistivity is ≥1 x 10

~ ≤ 1 x 10

Ohms/square.

5. All measurements are in millimeters.

6. Standard reel size is 7 inches. Standard reel quantity is 3000 pcs.

8.00 ± 0.10

3.50 ± 0.05

∅1.50 + 0.1/–0

Pin 1

0.22 ± 0.04

4.00 ± 0.10

0.99

2.00 ± 0.05 2.00 ± 0.05

3.15 ± 0.05

0.22 ± 0.04

2.77 ± 0.05

1.22 ± 0.05

1.75 ± 0.10

Figure 12. SOT-23 Tape and Reel Dimensions

DATA SHEET • SMP1307 SERIES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200045H • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 11, 2010 9

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by

Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the

information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to

update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or

information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions

of Sale.

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A

PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY

DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS

SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,

LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,

death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any

damages resulting from such improper use or sale.

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of

products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for

applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.

Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands

and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,

are incorporated by reference.