Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 FEATURES * Polarized aluminium electrolytic capacitors, non-solid handbook, 4 columns * Radial leads, cylindrical aluminium case, all-insulated (light blue) * Natural pitch 2.5 mm and 5 mm * Charge and discharge proof * Miniaturized, high CV-product per unit volume MAM074 * Low leakage current, low energy consumption. Fig.1 Component outlines. APPLICATIONS * Telecommunication, automotive, audio-video, EDP and industrial * Coupling, decoupling, buffering, timing, energy storage handbook, halfpage RLC 013 * Portable and mobile equipment standard leakage current * Low surface demand on printed-circuit board. RSP 036 MLC975 QUICK REFERENCE DATA DESCRIPTION VALUE Case sizes (Dnom x Lnom in mm) 5 x 11 and 8.2 x 11 0.47 to 470 F Rated capacitance range, CR 20%; 10% available on request Tolerance on CR 6.3 to 50 V Rated voltage range, UR -40 to +85 C Category temperature range Leakage current after 2 minutes: UR = 6.3 to 25 V 0.002CR x UR or 0.7 A (whichever is greater) UR = 35 and 50 V 0.002CR x UR + 1 A Endurance test at 85 C 2000 hours Useful life at 105 C 750 hours Useful life at 85 C 3000 hours Useful life at 40 C, 1.4 x IR applied 80000 hours Shelf life at 0 V, 85 C 500 hours Based on sectional specification IEC 384-4/CECC 30300, LL grade Climatic category IEC 68 (DIN 40040) 40/085/56 (GPF) Approvals 1995 Aug 02 LNZ 44-04 2 Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 Selection chart for CR, UR and relevant nominal case sizes (D x L in mm) Preferred types in bold. CR (F) UR (V) 6.3 10 16 25 35 0.47 - - - - - 5 x 11 1.0 - - - 5 x 11 - 5 x 11 2.2 - - - 5 x 11 - 5 x 11 3.3 - - - 5 x 11 - 5 x 11 4.7 - - - 5 x 11 - 5 x 11 10 - - - 5 x 11 - 5 x 11 22 - - - 5 x 11 33 - - 47 - 5 x 11 5 x 11 - 5 x 11 8.2 x 11 - 5 x 11 50 5 x 11 8.2 x 11 - 8.2 x 11 68 - 5 x 11 - - - 8.2 x 11 100 - 5 x 11 8.2 x 11 - 8.2 x 11 - 220 - 8.2 x 11 - - - - 330 8.2 x 11 - - - - - 470 8.2 x 11 - - - - - 1995 Aug 02 3 Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 MECHANICAL DATA, AVAILABLE FORMS AND PACKAGING QUANTITIES handbook, 2 columns O D handbook, 2 columns L OD L 1 4 0 15 min Od F MGB133 - 1 Od F 5 min MBC317 Dimensions in mm. For dimensions see Table 1 Dimensions in mm. For dimensions see Table 1 Fig.2 Form CA: Long leads. Table 1 Fig.3 Form CB: Cut leads. Physical dimensions, mass and packaging quantities; see Figs 2 and 3 NOMINAL CASE SIZE D x L (mm) CASE CODE d (mm) Dmax (mm) Lmax (mm) F (mm) MASS (g) 5 x 11 11 0.5 5.5 12 2.5 0.5 8.2 x 11 13 0.6 8.7 12 5.0 0.5 1995 Aug 02 PACKAGING QUANTITIES 4 FORM CA, CB FORM TFA, TNA 0.4 1000 2000 1.1 1000 1000 Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 Taped products handbook, 2 columns handbook, 4 columns MRA448 Form TNA. Case D x L = 5 x 11 mm. Pitch F = 2.5 mm. Tape dimensions are specified in this handbook, section "Packaging". Form TFA. Case D x L = 5 x 11 and 8.2 x 11 mm. Pitch F = 5 mm. Tape dimensions are specified in this handbook, section "Packaging". Fig.4 Taped in box (ammopack), straight and formed. MARKING The capacitors are marked (where possible) with the following information: * Rated capacitance (in F) * Tolerance on rated capacitance, code letter in accordance with "IEC 62" * Rated voltage (in V) * Group number (013) * Name of manufacturer (PH) * Date code in accordance with "IEC 62" * Code indicating factory of origin * Minus-sign on top to identify the negative terminal. 1995 Aug 02 MRA449 5 Fig.5 Taped in box (ammopack), straight leads. Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 ELECTRICAL DATA Unless otherwise specified, all electrical values in Tables 2 and 4 apply at Tamb = 20 C, P = 86 to 106 kPa, RH = 45 to 75%. SYMBOL DESCRIPTION CR rated capacitance at 100 Hz, tolerance 20% IR rated RMS ripple current at 100 Hz, 85 C IL2 max. leakage current after 2 minutes at UR Tan max. dissipation factor at 100 Hz ESR equivalent series resistance at 100 Hz (calculated from tan max and CR) Z max. impedance at 10 kHz and +20, -25 or -40 C Table 2 UR (V) 6.3 10 16 25 Electrical data; preferred types in bold NOMINAL CASE SIZE D x L (mm) CASE CODE IR 100 Hz 85 C (mA) 330 8.2 x 11 13 210 470 8.2 x 11 13 47 5 x 11 11 68 5 x 11 11 CR 100 Hz (F) ESR 100 Hz () Z 10 kHz +20 C () Z 10 kHz -25 C () Z 10 kHz -40 C () 4.2 0.2 1.0 0.9 5.2 15 250 5.9 0.2 0.7 0.64 3.5 10 75 1.0 0.16 5.4 2.8 15 53 90 1.4 0.16 3.7 2.5 13 47 100 5 x 11 11 110 2.0 0.16 2.5 1.7 9.0 25 220 8.2 x 11 13 190 4.4 0.16 1.2 0.9 5.2 15 33 5 x 11 11 70 1.1 0.13 6.3 2.8 14 52 47 5 x 11 11 85 1.5 0.13 4.4 2.1 9.5 36 100 8.2 x 11 13 150 3.2 0.13 2.1 1.0 5.5 17 1.0 5 x 11 11 5 0.7 0.06 95 40 130 400 2.2 5 x 11 11 10 0.7 0.06 43 18 59 180 3.3 5 x 11 11 18 0.7 0.06 29 12 39 120 4.7 5 x 11 11 25 0.7 0.06 20 8.5 27 85 5 x 11 11 50 0.7 0.06 9.5 4.0 17 65 15 56 10 35 Tan 100 Hz IL2 2 min (A) 22 5 x 11 11 75 1.1 0.08 5.8 2.7 47 8.2 x 11 13 130 2.4 0.08 2.7 1.3 33 5 x 11 11 70 3.3 0.13 6.3 2.8 100 8.2 x 11 13 150 8.0 0.13 2.1 1.0 1995 Aug 02 6 6.5 14 5.5 17 52 17 Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 ORDERING INFORMATION Ordering example Electrolytic capacitor RLC 013 100 F/16 V; 20% Nominal case size: 8.2 x 11 mm; Form TFA Catalogue number: 2222 013 35101. Table 3 Ordering information; preferred types in bold CATALOGUE NUMBER 2222 . . . UR (V) 6.3 10 16 CR 100 Hz (F) BULK PACKAGING CASE CODE TAPED AMMOPACK LONG LEADS CUT LEADS FORM CA F (mm) FORM CB F (mm) FORM TFA F (mm) FORM TNA F (mm) 013 33331 5.0 - - 330 13 013 53331 5.0 013 63331 5.0 470 13 013 53471 5.0 013 63471 5.0 013 33471 5.0 - - 47 11 013 54479 2.5 - - 013 34479 5.0 013 74479 2.5 68 11 013 54689 2.5 - - 013 34689 5.0 013 74689 2.5 100 11 013 54101 2.5 - - 013 34101 5.0 013 74101 2.5 220 13 013 54221 5.0 013 64221 5.0 013 34221 5.0 - - 33 11 013 55339 2.5 - - 013 35339 5.0 013 75339 2.5 47 11 013 55479 2.5 - - 013 35479 5.0 013 75479 2.5 100 25 13 013 55101 5.0 013 65101 5.0 013 35101 5.0 - - 1.0 11 013 56108 2.5 - - 013 36108 5.0 013 76108 2.5 2.2 11 013 56228 2.5 - - 013 36228 5.0 013 76228 2.5 3.3 11 013 56338 2.5 - - 013 36338 5.0 013 76338 2.5 4.7 11 013 56478 2.5 - - 013 36478 5.0 013 76478 2.5 11 013 56109 2.5 - - 013 36109 5.0 013 76109 2.5 22 11 013 56229 2.5 - - 013 36229 5.0 013 76229 2.5 47 13 013 56479 5.0 013 66479 5.0 013 36479 5.0 - - 33 11 013 50339 5.0 - - 013 30339 5.0 013 70339 2.5 100 13 013 50101 5.0 013 60101 5.0 013 30101 5.0 - - 10 35 . . . . . 1995 Aug 02 7 Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 ELECTRICAL DATA (continued) Table 4 UR (V) Electrical data continued; preferred types in bold CR 100 Hz (F) 50 NOMINAL CASE SIZE D x L (mm) CASE CODE IR 100 Hz 85C (mA) IL2 2 min (A) Tan 100 Hz ESR 100 Hz () Z 10 kHz +20 C () Z 10 kHz -25 C () Z 10 kHZ -40 C () 0.47 5 x 11 11 5 1.1 0.06 200 85 230 850 1.0 5 x 11 11 10 1.1 0.06 95 40 130 400 2.2 5 x 11 11 20 1.2 0.06 43 18 59 180 3.3 5 x 11 11 32 1.3 0.06 29 12 4.7 5 x 11 11 38 1.5 0.06 20 5 x 11 11 55 2.0 0.06 10 39 120 8.5 27 85 9.5 4.0 17 65 15 56 22 5 x 11 11 75 3.2 0.08 5.8 2.7 33 8.2 x 11 13 110 4.3 0.06 2.9 1.4 7.0 18 47 8.2 x 11 13 130 5.7 0.08 2.7 1.3 6.5 17 68 8.2 x 11 13 150 7.8 0.08 1.9 1.2 6.0 17 Additional electrical data PARAMETER CONDITIONS VALUE Voltage Surge voltage for short periods Us 1.3 x UR Reverse voltage Urev 1 V Current Leakage current after 2 minutes at UR: UR = 6.3 to 25 V IL2 0.002CR x UR or 0.7 A (whichever is greater) UR = 35 and 50 V IL2 0.002CR x UR + 1 A Inductance Equivalent series inductance (ESL) 1995 Aug 02 case D x L = 5 x 11 mm typ. 13 nH case D x L = 8.2 x 11 mm typ. 16 nH 8 Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 ORDERING INFORMATION (continued) Table 5 Ordering information continued; preferred types in bold CATALOGUE NUMBER 2222 . . . UR (V) CR 100 Hz (F) . . . . . BULK PACKAGING CASE CODE TAPED AMMOPACK LONG LEADS CUT LEADS FORM CA F (mm) FORM CB F (mm) FORM TFA F (mm) FORM TNA F (mm) 0.47 11 013 51477 2.5 - - 013 31477 5.0 013 71477 2.5 1.0 11 013 51108 2.5 - - 013 31108 5.0 013 71108 2.5 2.2 11 013 51228 2.5 - - 013 31228 5.0 013 71228 2.5 3.3 11 013 51338 2.5 - - 013 31338 5.0 013 71338 2.5 4.7 11 013 51478 2.5 - - 013 31478 5.0 013 71478 2.5 11 013 51109 2.5 - - 013 31109 5.0 013 71109 2.5 22 11 013 51229 2.5 - - 013 31229 5.0 013 71229 2.5 33 13 013 51339 5.0 013 61339 5.0 013 31339 5.0 - - 47 13 013 51479 5.0 013 61479 5.0 013 31479 5.0 - - 68 13 013 51689 5.0 013 61689 5.0 013 31689 5.0 - - 50 10 1995 Aug 02 9 Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 ELECTRICAL DATA (continued) MGB135 10 MGB136 1.0 handbook, halfpage handbook, halfpage I I0 I I0 0.8 0.6 1 0.4 0.2 10 1 0 0 20 40 60 80 100 T amb ( oC) I0 = leakage current during continuous operation at 20 C and UR. Fig.6 Fig.7 MGB137 handbook, halfpage I I0 1 10 10 1 2 1 10 102 t (s) 103 I0 = leakage current. Leakage current after 2 minutes (IL2) is specified in Tables 2 and 4. Fig.8 1995 Aug 02 0.2 0.4 0.6 0.8 U UR 1.0 I0 = leakage current during continuous operation at 20 C and UR. Typical multiplier of leakage current as a function of ambient temperature. 10 0 Typical multiplier of leakage current as a function of time. 10 Typical multiplier of leakage current as a function of U/UR. Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 Capacitance (C) MGB138 1.1 4 handbook, 4 columns C C0 1 1.0 1 0.9 2 3 4 0.8 Curve 1: 25 and 50 V; 0.22 to 2.2 F. Curve 2: 25 and 50 V; 3.3 to 6.8 F. Curve 3: 25 and 50 V; 10 to 68 F. Curve 4: 6.3 V; 10 V; 16 V; 35 V. C0 = capacitance at 20 C, 100 Hz. 0.7 40 20 0 20 40 60 80 100 T amb ( oC) Fig.9 Typical multiplier of capacitance as a function of ambient temperature. MGB139 1.1 handbook, 4 columns C C0 6 1.0 1 1 2 0.9 3 4 0.8 Curve 1: 25 and 50 V; 0.22 to 2.2 F. Curve 2: 25 and 50 V; 3.3 to 6.8 F. Curve 3: 25 and 50 V; 10 and 15 F. Curve 4: 25 and 50 V; 22 to 68 F. Curve 5: 16 and 35 V. Curve 6: 6.3 and 10 V. C0 = capacitance at 20 C, 100 Hz. 0.7 10 5 6 10 2 10 3 10 4 Fig.10 Typical multiplier of capacitance as a function of frequency. 1995 Aug 02 11 f (Hz) 10 5 Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 Equivalent series resistance (ESR) MGB140 1000 handbook, 4 columns ESR () 100 1 2 10 3 Curve 1: 0.47 F. Curve 2: 1.0 F. Curve 3: 4.7 F. Curve 4: 10 F. Curve 5: 22 F. Curve 6: 47 F. Case D x L = 5 x 11 mm. ESR = typical at 100 Hz. 4 5 6 1 60 40 20 0 20 40 60 80 100 T amb ( oC) Fig.11 Typical ESR as a function of ambient temperature. MGB141 100 handbook, 4 columns ESR () 10 1 1 2 3 Curve 1: 47 F. Curve 2: 100 F. Curve 3: 220 F. Case D x L = 8.2 x 11 mm. ESR = typical at 100 Hz. 0.1 60 40 20 0 20 40 60 Fig.12 Typical ESR as a function of ambient temperature. 1995 Aug 02 12 80 100 T amb ( oC) Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 Impedance (Z) MGB142 handbook, 4 columns 10 3 Curve 1: 0.47 F. Curve 2: 0.68 F. Curve 3: 1.0 F. Curve 4: 1.5 F. Curve 5: 2.2 F. Curve 6: 3.3 F. Curve 7: 4.7 F. Curve 8: 6.8 F. Curve 9: 10 F. Curve 10: 15 F. Curve 11: 22 F. Curve 12: 33 F. Curve 13: 47 F. Curve 14: 68 F. Case D x L = 5 x 11 mm. Tamb = 20 C. Z ( ) 10 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 10 1 10 2 10 3 10 4 10 5 f (Hz) 10 6 Fig.13 Typical impedance as a function of frequency. MGB143 103 handbook, 4 columns Z ( ) 102 1 10 Curve 1: 33 F. Curve 2: 47 F. Curve 3: 68 F. Curve 4: 100 F. Curve 5: 150 F. Curve 6: 220 F. Case D x L = 8.2 x 11 mm. Tamb = 20 C. 2 3 4 5 6 1 10 1 10 2 10 3 10 4 Fig.14 Typical impedance as a function of frequency. 1995 Aug 02 13 10 5 f (Hz) 10 6 Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 RIPPLE CURRENT AND USEFUL LIFE Table 6 Multiplier of ripple current (IR/IRO) as a function of frequency; IRO = ripple current at 85 C, 100 Hz IR MULTIPLIER FREQUENCY (Hz) UR = 6.3 V UR = 10, 16 and 35 V UR = 25 and 50 V 50 0.9 0.85 0.8 100 1.0 1.0 1.0 300 1.12 1.2 1.25 1000 1.2 1.3 1.4 3000 1.25 1.35 1.5 1.3 1.4 1.6 10000 MBC243 3.3 handbook, full pagewidth IA 3.2 IR 3.1 3.0 2.8 2.6 2.4 lifetime multiplier 2.2 0 1. 5 1. 2.0 0 2. 0 3. 1.8 0 4. 0 6. 1.6 15 20 (1) 30 50 70 1.2 1.0 0.8 0.5 0.0 10 1.4 40 50 60 70 80 90 100 T amb ( oC) IA = actual ripple current at 100 Hz. IR = ripple current at 85 C, 100 Hz. (1) Useful life at 85 C and IR applied: 3000 hours. Fig.15 Multiplier of useful life as a function of ambient temperature and ripple current load. 1995 Aug 02 14 Philips Components Product specification Non-solid Al-electrolytic capacitors Radial Low Leakage Current RLC 013 SPECIFIC TESTS AND REQUIREMENTS General tests and requirements are specified in this handbook, section "Tests and Requirements". Table 7 Test procedures and requirements TEST PROCEDURE NAME OF TEST Endurance REQUIREMENTS REFERENCE IEC 384-4/ CECC 30300, subclause 4.13 Tamb = 85 C; UR applied; 2000 hours UR 6.3 V; C/C: +15/-30% UR > 6.3 V; C/C: 15% tan 1.3 x spec. limit Z 2 x spec. limit IL2 spec. limit Useful life CECC 30301, subclause 1.8.1 Tamb = 85 C; UR and IR applied; 3000 hours UR 6.3 V; C/C: +45/-50% UR > 6.3 V; C/C: 45% tan 3 x spec. limit Z 3 x spec. limit IL2 spec. limit no short or open circuit total failure percentage: 1% Shelf life (storage at high temperature) 1995 Aug 02 IEC 384-4/ CECC 30300 subclause 4.17 Tamb = 85 C; no voltage applied; 500 hours; after test: UR to be applied for 30 minutes, 24 to 48 hours before measurement 15 C/C, tan , Z: for requirements see `Endurance test' above IL2 2 x spec. limit