1995 Aug 02 2
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
FEATURES
•Polarized aluminium electrolytic
capacitors, non-solid
•Radial leads, cylindrical aluminium
case, all-insulated (light blue)
•Natural pitch 2.5 mm and 5 mm
•Charge and discharge proof
•Miniaturized, high CV-product per
unit volume
•Low leakage current, low energy
consumption.
APPLICATIONS
•Telecommunication, automotive,
audio-video, EDP and industrial
•Coupling, decoupling, buffering,
timing, energy storage
•Portable and mobile equipment
•Low surface demand on
printed-circuit board.
Fig.1 Component outlines.
handbook, 4 columns
MAM074
handbook, halfpage
RSP 036
RLC 013
standard
leakage current
MLC975
QUICK REFERENCE DATA
DESCRIPTION VALUE
Case sizes (∅Dnom ×Lnom in mm) 5 ×11 and 8.2 ×11
Rated capacitance range, CR0.47 to 470 µF
Tolerance on CR±20%; ±10% available on request
Rated voltage range, UR6.3 to 50 V
Category temperature range −40 to +85 °C
Leakage current after 2 minutes:
UR= 6.3 to 25 V 0.002CR×URor 0.7 µA (whichever is greater)
UR= 35 and 50 V 0.002CR×UR+1µA
Endurance test at 85 °C 2000 hours
Useful life at 105 °C 750 hours
Useful life at 85 °C 3000 hours
Useful life at 40 °C, 1.4 ×IR applied 80000 hours
Shelf life at 0 V, 85 °C 500 hours
Based on sectional specification IEC 384-4/CECC 30300, LL grade
Climatic category IEC 68 (DIN 40040) 40/085/56 (GPF)
Approvals LNZ 44-04
1995 Aug 02 3
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
Selection chart for CR, UR and relevant nominal case sizes (∅D×L in mm)
Preferred types in bold.
CR
(µF) UR (V)
6.3 10 16 25 35 50
0.47 −−−− −5×11
1.0 −−−5×11 −5×11
2.2 −−−5×11 −5×11
3.3 −−−5×11 −5×11
4.7 −−−5×11 −5×11
10 −−−5×11 −5×11
22 −−−5×11 −5×11
33 −−5×11 −5×11 8.2 ×11
47 −5×11 5 ×11 8.2 ×11 −8.2 ×11
68 −5×11 −−−8.2 ×11
100 −5×11 8.2 ×11 −8.2 ×11 −
220 −8.2 ×11 −−−−
330 8.2 ×11 −−−−−
470 8.2 ×11 −−−−−
1995 Aug 02 4
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
MECHANICAL DATA, AVAILABLE FORMS AND PACKAGING QUANTITIES
Fig.2 Form CA: Long leads.
handbook, 2 columns
MBC317
L
O D
F15 min
5 min
dO
Dimensions in mm.
For dimensions see Table 1
Fig.3 Form CB: Cut leads.
handbook, 2 columns
L
MGB133 - 1
4
F
1
0Od
OD
Dimensions in mm.
For dimensions see Table 1
Table 1 Physical dimensions, mass and packaging quantities; see Figs 2 and 3
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE ∅d
(mm) ∅Dmax
(mm) Lmax
(mm) F
(mm) MASS
(g)
PACKAGING QUANTITIES
FORM
CA, CB FORM
TFA, TNA
5×11 11 0.5 5.5 12 2.5 ±0.5 ≈0.4 1000 2000
8.2 ×11 13 0.6 8.7 12 5.0 ±0.5 ≈1.1 1000 1000
1995 Aug 02 5
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
Taped products
Fig.4 Taped in box (ammopack), straight and formed.
Form TFA.
Case ∅D×L=5×11 and 8.2 ×11 mm.
Pitch F = 5 mm.
Tape dimensions are specified in this handbook, section
“Packaging”
.
handbook, 4 columns
MRA448
Fig.5 Taped in box (ammopack),
straight leads.
Form TNA.
Case ∅D×L=5×11 mm.
Pitch F = 2.5 mm.
Tape dimensions are specified in this
handbook, section
“Packaging”
.
handbook, 2 columns
MRA449
MARKING
The capacitors are marked (where possible) with the following information:
•Rated capacitance (in µF)
•Tolerance on rated capacitance, code letter in accordance with
“IEC 62”
•Rated voltage (in V)
•Group number (013)
•Name of manufacturer (PH)
•Date code in accordance with
“IEC 62”
•Code indicating factory of origin
•Minus-sign on top to identify the negative terminal.
1995 Aug 02 6
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
ELECTRICAL DATA
Unless otherwise specified, all electrical values in Tables 2 and 4 apply at Tamb =20°C, P = 86 to 106 kPa,
RH = 45 to 75%.
Table 2 Electrical data; preferred types in bold
SYMBOL DESCRIPTION
CRrated capacitance at 100 Hz, tolerance ±20%
IRrated RMS ripple current at 100 Hz, 85 °C
IL2 max. leakage current after 2 minutes at UR
Tan δmax. dissipation factor at 100 Hz
ESR equivalent series resistance at 100 Hz (calculated from tan δmax and CR)
Z max. impedance at 10 kHz and +20, −25 or −40 °C
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE
IR
100 Hz
85 °C
(mA)
IL2
2 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
10 kHz
+20 °C
(Ω)
Z
10 kHz
−25 °C
(Ω)
Z
10 kHz
−40 °C
(Ω)
6.3 330 8.2 ×11 13 210 4.2 0.2 1.0 0.9 5.2 15
470 8.2 ×11 13 250 5.9 0.2 0.7 0.64 3.5 10
10 47 5 ×11 11 75 1.0 0.16 5.4 2.8 15 53
68 5 ×11 11 90 1.4 0.16 3.7 2.5 13 47
100 5 ×11 11 110 2.0 0.16 2.5 1.7 9.0 25
220 8.2 ×11 13 190 4.4 0.16 1.2 0.9 5.2 15
16 33 5 ×11 11 70 1.1 0.13 6.3 2.8 14 52
47 5 ×11 11 85 1.5 0.13 4.4 2.1 9.5 36
100 8.2 ×11 13 150 3.2 0.13 2.1 1.0 5.5 17
25 1.0 5 ×11 11 5 0.7 0.06 95 40 130 400
2.2 5 ×11 11 10 0.7 0.06 43 18 59 180
3.3 5 ×11 11 18 0.7 0.06 29 12 39 120
4.7 5 ×11 11 25 0.7 0.06 20 8.5 27 85
10 5 ×11 11 50 0.7 0.06 9.5 4.0 17 65
22 5 ×11 11 75 1.1 0.08 5.8 2.7 15 56
47 8.2 ×11 13 130 2.4 0.08 2.7 1.3 6.5 17
35 33 5 ×11 11 70 3.3 0.13 6.3 2.8 14 52
100 8.2 ×11 13 150 8.0 0.13 2.1 1.0 5.5 17
1995 Aug 02 7
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
ORDERING INFORMATION
Ordering example
Electrolytic capacitor RLC 013
100 µF/16 V; ±20%
Nominal case size: ∅8.2 ×11 mm; Form TFA
Catalogue number: 2222 013 35101.
Table 3 Ordering information; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
CASE
CODE
CATALOGUE NUMBER 2222 . . . . . . . .
BULK PACKAGING TAPED AMMOPACK
LONG LEADS CUT LEADS
FORM
CA F
(mm) FORM
CB F
(mm) FORM
TFA F
(mm) FORM
TNA F
(mm)
6.3 330 13 013 53331 5.0 013 63331 5.0 013 33331 5.0 −−
470 13 013 53471 5.0 013 63471 5.0 013 33471 5.0 −−
10 47 11 013 54479 2.5 −−013 34479 5.0 013 74479 2.5
68 11 013 54689 2.5 −−013 34689 5.0 013 74689 2.5
100 11 013 54101 2.5 −−013 34101 5.0 013 74101 2.5
220 13 013 54221 5.0 013 64221 5.0 013 34221 5.0 −−
16 33 11 013 55339 2.5 −−013 35339 5.0 013 75339 2.5
47 11 013 55479 2.5 −−013 35479 5.0 013 75479 2.5
100 13 013 55101 5.0 013 65101 5.0 013 35101 5.0 −−
25 1.0 11 013 56108 2.5 −−013 36108 5.0 013 76108 2.5
2.2 11 013 56228 2.5 −−013 36228 5.0 013 76228 2.5
3.3 11 013 56338 2.5 −−013 36338 5.0 013 76338 2.5
4.7 11 013 56478 2.5 −−013 36478 5.0 013 76478 2.5
10 11 013 56109 2.5 −−013 36109 5.0 013 76109 2.5
22 11 013 56229 2.5 −−013 36229 5.0 013 76229 2.5
47 13 013 56479 5.0 013 66479 5.0 013 36479 5.0 −−
35 33 11 013 50339 5.0 −−013 30339 5.0 013 70339 2.5
100 13 013 50101 5.0 013 60101 5.0 013 30101 5.0 −−
1995 Aug 02 8
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
ELECTRICAL DATA (continued)
Table 4 Electrical data continued; preferred types in bold
Additional electrical data
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE
IR
100 Hz
85°C
(mA)
IL2
2 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
10 kHz
+20 °C
(Ω)
Z
10 kHz
−25 °C
(Ω)
Z
10 kHZ
−40 °C
(Ω)
50 0.47 5 ×11 11 5 1.1 0.06 200 85 230 850
1.0 5 ×11 11 10 1.1 0.06 95 40 130 400
2.2 5 ×11 11 20 1.2 0.06 43 18 59 180
3.3 5 ×11 11 32 1.3 0.06 29 12 39 120
4.7 5 ×11 11 38 1.5 0.06 20 8.5 27 85
10 5 ×11 11 55 2.0 0.06 9.5 4.0 17 65
22 5 ×11 11 75 3.2 0.08 5.8 2.7 15 56
33 8.2 ×11 13 110 4.3 0.06 2.9 1.4 7.0 18
47 8.2 ×11 13 130 5.7 0.08 2.7 1.3 6.5 17
68 8.2 ×11 13 150 7.8 0.08 1.9 1.2 6.0 17
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage for short periods Us≤1.3 ×UR
Reverse voltage Urev ≤1V
Current
Leakage current after 2 minutes at UR:
UR= 6.3 to 25 V IL2 ≤0.002CR×URor 0.7 µA
(whichever is greater)
UR= 35 and 50 V IL2 ≤0.002CR×UR+1µA
Inductance
Equivalent series inductance (ESL) case ∅D×L=5×11 mm typ. 13 nH
case ∅D×L = 8.2 ×11 mm typ. 16 nH
1995 Aug 02 9
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
ORDERING INFORMATION (continued)
Table 5 Ordering information continued; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
CASE
CODE
CATALOGUE NUMBER 2222 . . . . ....
BULK PACKAGING TAPED AMMOPACK
LONG LEADS CUT LEADS
FORM
CA F
(mm) FORM
CB F
(mm) FORM
TFA F
(mm) FORM
TNA F
(mm)
50 0.47 11 013 51477 2.5 −−013 31477 5.0 013 71477 2.5
1.0 11 013 51108 2.5 −−013 31108 5.0 013 71108 2.5
2.2 11 013 51228 2.5 −−013 31228 5.0 013 71228 2.5
3.3 11 013 51338 2.5 −−013 31338 5.0 013 71338 2.5
4.7 11 013 51478 2.5 −−013 31478 5.0 013 71478 2.5
10 11 013 51109 2.5 −−013 31109 5.0 013 71109 2.5
22 11 013 51229 2.5 −−013 31229 5.0 013 71229 2.5
33 13 013 51339 5.0 013 61339 5.0 013 31339 5.0 −−
47 13 013 51479 5.0 013 61479 5.0 013 31479 5.0 −−
68 13 013 51689 5.0 013 61689 5.0 013 31689 5.0 −−
1995 Aug 02 10
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
ELECTRICAL DATA (continued)
Fig.6 Typical multiplier of leakage current as
a function of ambient temperature.
I0= leakage current during continuous operation at 20 °C and UR.
handbook, halfpage
1000
MGB135
1
10
20 40 60 80
Tamb ( C)
o
I
0
I
10 1
Fig.7 Typical multiplier of leakage current as
a function of U/UR.
I0= leakage current during continuous operation at 20 °C and UR.
handbook, halfpage
0 1.0
1.0
0
0.2
MGB136
0.4
0.6
0.8
0.2 0.4 0.6 0.8
I
0
I
U
R
U
Fig.8 Typical multiplier of leakage current as
a function of time.
I0= leakage current.
Leakage current after 2 minutes (IL2) is specified in Tables 2 and 4.
handbook, halfpage
1
MGB137
10 102103
10
1
t (s)
I
0
I
10 1
10 2
1995 Aug 02 11
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
Capacitance (C)
Curve 1: 25 and 50 V; 0.22 to 2.2 µF.
Curve 2: 25 and 50 V; 3.3 to 6.8 µF.
Curve 3: 25 and 50 V; 10 to 68 µF.
Curve 4: 6.3 V; 10 V; 16 V; 35 V.
C0= capacitance at 20 °C, 100 Hz.
Fig.9 Typical multiplier of capacitance as a function of ambient temperature.
handbook, 4 columns
020
MGB138
40 20 40 60 80
0.7
0.8
0.9
1.0
100
1.1
Tamb ( C)
o
C
0
C1
4
4
2
1
3
Curve 1: 25 and 50 V; 0.22 to 2.2 µF.
Curve 2: 25 and 50 V; 3.3 to 6.8 µF.
Curve 3: 25 and 50 V; 10 and 15 µF.
Curve 4: 25 and 50 V; 22 to 68 µF.
Curve 5: 16 and 35 V.
Curve 6: 6.3 and 10 V.
C0= capacitance at 20 °C, 100 Hz.
Fig.10 Typical multiplier of capacitance as a function of frequency.
handbook, 4 columns
105
MGB139
104
103
102
10 f (Hz)
0.7
0.8
0.9
1.0
1.1
C
0
C
4
2
1
3
6
5
6
1
1995 Aug 02 12
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
Equivalent series resistance (ESR)
Curve 1: 0.47 µF.
Curve 2: 1.0 µF.
Curve 3: 4.7 µF.
Curve 4: 10 µF.
Curve 5: 22 µF.
Curve 6: 47 µF.
Case ∅D×L=5×11 mm.
ESR = typical at 100 Hz.
Fig.11 Typical ESR as a function of ambient temperature.
handbook, 4 columns
MGB140
02040 20 40 60 80 100
Tamb ( C)
o
60
100
1000
10
1
ESR
(Ω)
4
2
1
3
5
6
Curve 1: 47 µF.
Curve 2: 100 µF.
Curve 3: 220 µF.
Case ∅D×L = 8.2 ×11 mm.
ESR = typical at 100 Hz.
Fig.12 Typical ESR as a function of ambient temperature.
handbook, 4 columns
MGB141
02040 20 40 60 80 100
Tamb ( C)
o
60
10
100
1
0.1
ESR
(Ω)
1
2
3
1995 Aug 02 13
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
Impedance (Z)
Fig.13 Typical impedance as a function of frequency.
handbook, 4 columns
106
MGB142
105
104
103
102f (Hz)
103
10
1
Z
( )Ω
102
4
2
1
3
5
6
10
8
7
9
11
12
13
14
Curve 1: 0.47 µF.
Curve 2: 0.68 µF.
Curve 3: 1.0 µF.
Curve 4: 1.5 µF.
Curve 5: 2.2 µF.
Curve 6: 3.3 µF.
Curve 7: 4.7 µF.
Curve 8: 6.8 µF.
Curve 9: 10 µF.
Curve 10: 15 µF.
Curve 11: 22 µF.
Curve 12: 33 µF.
Curve 13: 47 µF.
Curve 14: 68 µF.
Case ∅D×L=5×11 mm.
Tamb =20°C.
Curve 1: 33 µF.
Curve 2: 47 µF.
Curve 3: 68 µF.
Curve 4: 100 µF.
Curve 5: 150 µF.
Curve 6: 220 µF.
Case ∅D×L = 8.2 ×11 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB143
105
104
103
102
103
102
10
1
f (Hz)
Z
( )Ω
10 1
4
2
1
3
5
6
Fig.14 Typical impedance as a function of frequency.
1995 Aug 02 14
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
RIPPLE CURRENT AND USEFUL LIFE
Table 6 Multiplier of ripple current (IR/IRO) as a function of frequency; IRO = ripple current at 85 °C, 100 Hz
FREQUENCY
(Hz) IR MULTIPLIER
UR= 6.3 V UR= 10, 16 and 35 V UR= 25 and 50 V
50 0.9 0.85 0.8
100 1.0 1.0 1.0
300 1.12 1.2 1.25
1000 1.2 1.3 1.4
3000 1.25 1.35 1.5
≥10000 1.3 1.4 1.6
Fig.15 Multiplier of useful life as a function of ambient temperature and ripple current load.
IA= actual ripple current at 100 Hz.
IR= ripple current at 85 °C, 100 Hz.
(1) Useful life at 85 °C and IR applied: 3000 hours.
handbook, full pagewidth
3.3
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.5
0.0
3.1
40 50 60 70 80 90 100
T ( C)
amb o
IA
R
I
MBC243
lifetime multiplier
(1)
70
50
6.0
4.0
2.0
1.5
30
15
10
3.0
20
1.0
1995 Aug 02 15
Philips Components Product specification
Non-solid Al-electrolytic capacitors
Radial Low Leakage Current RLC 013
SPECIFIC TESTS AND REQUIREMENTS
General tests and requirements are specified in this handbook, section
“Tests and Requirements”
.
Table 7 Test procedures and requirements
TEST PROCEDURE REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 384-4/
CECC 30300,
subclause 4.13
Tamb =85°C; UR applied;
2000 hours UR≤6.3 V; ∆C/C: +15/−30%
UR>6.3 V; ∆C/C: ±15%
tan δ≤1.3 ×spec. limit
Z≤2×spec. limit
IL2 ≤spec. limit
Useful life CECC 30301,
subclause 1.8.1 Tamb =85°C; UR and IR applied;
3000 hours UR≤6.3 V; ∆C/C: +45/−50%
UR>6.3 V; ∆C/C: ±45%
tan δ≤ 3 ×spec. limit
Z≤3×spec. limit
IL2 ≤spec. limit
no short or open circuit
total failure percentage: ≤1%
Shelf life
(storage at high
temperature)
IEC 384-4/
CECC 30300
subclause 4.17
Tamb =85°C; no voltage applied;
500 hours;
after test: UR to be applied for
30 minutes, 24 to 48 hours before
measurement
∆C/C, tan δ, Z: for requirements
see ‘Endurance test’ above
IL2 ≤2×spec. limit
