1
Motorola Optoelectronics Device Data
!
# "!"!
This device consists of a gallium arsenide infrared emitting diode optically coupled
to a r andom phase triac driver circuit and a p ower triac. It is capable of driving a l oad
of up to 2 amps (rms) directly, on line voltages from 20 to 280 volts AC (rms).
•Provides Normally Open Solid State AC Output with 2 Amp Rating
•70 Amp Single Cycle Surge Capability
•Phase Controllable
•High Input-Output Isolation of 3750 vac (rms)
•Static dv/dt Rating of 400 Volts/µs Guaranteed
•2 Amp Pilot Duty Rating Per UL508
W
117 (Overload Test)
and
W
118 (Endurance Test) [File No. 129224]
•CSA Approved [File No. CA77170-1]. VDE Approval in Process.
•Exceeds NEMA 2-230 and IEEE472 Noise Immunity Test Requirements
(See Figure 17)
DEVICE RATINGS (TA = 25°C unless otherwise noted)
Rating Symbol Value Unit
INPUT LED
Forward Current — Maximum Continuous IF50 mA
Forward Current — Maximum Peak
(PW = 100µs, 120 pps) IF(pk) 1.0 A
Reverse Voltage — Maximum VR6.0 V
OUTPUT TRIAC
Output Terminal Voltage — Maximum Transient (1) VDRM 600 V(pk)
Operating Voltage Range — Maximum Continuous
(f = 47–63 Hz) VT20 to 280 Vac(rms)
On-State Current Range
(Free Air, Power Factor ≥ 0.3) IT(rms) 0.03 to 2.0 A
Non-Repetitive Single Cycle Surge Current —
Maximum Peak (t = 16.7 ms) ITSM 70 A
Main Terminal Fusing Current (t = 8.3 ms) I2T 26 A2sec
Load Power Factor Range PF 0.3 to 1.0 —
Junction Temperature Range TJ– 40 to 125 °C
TOTAL DEVICE
Input-Output Isolation Voltage — Maximum (2)
47–63 Hz, 1 sec Duration VISO 3750 Vac(rms)
Thermal Resistance — Power Triac Junction to
Case (See Figure 18) RθJC 8.0 °C/W
Ambient Operating Temperature Range Toper – 40 to +100 °C
Storage Temperature Range Tstg – 40 to +150 °C
Lead Soldering Temperature — Maximum
(1/16″ From Case, 10 sec Duration) TL260 °C
1. Test voltages must be applied within dv/dt rating.
2. Input-Output isolation voltage, VISO, is an internal device dielectric breakdown rating.
(2)For this test, pins 2, 3 and the heat tab are common, and pins 7 and 9 are common.
POWER OPTO is a trademark of Motorola, Inc.
This document contains information on a new product. Specifications and information herein are subject to change without notice.
Preferred devices are Motorola recommended choices for future use and best overall value.