AWi 04.02.2011
HARTING Industrial Cable 8-wire Cat. 6
A
PUR
Industrial Cable
8-wire, Cat. 6
A
, PUR
Advantages
General
• Suitable for generic cabling Category
6
A
/ Class E
A
according ISO/IEC
11801 respectively EN 50173-1
especially for flexible installation (patch
cords)
• Qualified for transmission up to
10GigaBit Ethernet 10GBase-T acc.
IEEE802.3an
• Based on stranded copper wires
AWG26/7 delivers patch cord
performance up to 500MHz
• Applicable for industrial premises
• High EMC capability based on the
PIMF construction
• Flame retardant, halogen free and
RoHS compliant
This high-speed data cable was designed for flexible installation in
industrial premises and it’s especially suitable for termination of
HARTING RJ45 data plugs in IP 20 as well as in IP 67 / 65.
The four pair / eight wire PIMF-construction allows the transmission
of IT digital and analogue signals like Ethernet 10/100Mbit/s,
10GigaBit/s, video and voice services as well as IP-based data
services.
It delivers all characteristics to complete a generic cabling system
according ISO/IEC 24702 respectively EN 50173-3. Maximum patch
cord length specified up to 20m (part of transmission channel class
E
A
)
Transmission performance meets Cat.6
A
specification up to 500 MHz
for 10GigaBit Ethernet transmission according IEEE802.3an.
The cable is fully screened (each pair in metal foil plus an overall wire
braid) and guaranties a very safety signal transmission and high EMC
performance.
PUR is used as jacket material. The cable is flame retardant,
halogen free and RoHS compliant.
Identification
Part number
Drawing
Industrial Cable
8-wire, Cat. 6
A
, PUR
20 m ring
50 m ring
100 m ring
500 m reel
09 45 600 0630
09 45 600 0640
09 45 600 0600
09 45 600 0620 • Wire: tinned stranded copper, AWG26/7
• Insulation: PE, Ø 1.05 mm
• Color code: whbu/bu, whor/or, whgn/gn, whbr/br
• Pairs : Aluminate foil overlapped PIMF
• Overall screen: tinned copper wire braid, braid
coverage about 70 %
• Outer sheath: Polyurethane (PUR), flame retardant,
halogen free, lead free
Color of outer sheath: rape yellow, RAL 1021
Overall diameter: 6.3 mm – 6.9 mm
All data given are in line with the actual state of art and therefore not binding.
HARTING reserves the right to modify designs without giving the relevant reasons.
AWi 04.02.2011
HARTING Industrial Cable 8-wire Cat. 6
A
PUR
Technical Characteristics
Performance
Mechanical Characteristics
Minimal bending radius
Tensile strength
Electrical Characteristics at 20 °C
Conductor resistance
Insulation resistance
Propagation delay
Characteristic impedance 100 MHz
Test voltage
Operating voltage
Chemical Characteristics
Flame retardant
Halogenfree
Oil resistant
Free of hazardous substances
Thermal Characteristics
Permissible temperature range
fixed operation
flexible operation
Printing
Weight about
Category 6
A
according to IEC 61156-6
Repeated bending: 8 x diameter
Single bending: 4 x diameter
max. 70 N
max. 290 Ohm/km
min. 500 MOhm*km
5.13 ns/m
(100 ± 5) Ohm
700 V
max. 100 V
IEC 60332-1-2
IEC 60754-1
EN 60811-2-1 (90 °C / 7x24h)
RoHS 2002/95/EG
- 40 °C to + 80 °C
- 40 °C to + 80 °C
HARTING INDUSTRIAL CABLE S/FTP CAT 6
A
PUR
4x2xAWG26/7 094560006000101 „year/internal order number“
„sequential length in metres“ Textintervals about 1000 mm
46 kg/km
All data given are in line with the actual state of art and therefore not binding.
HARTING reserves the right to modify designs without giving the relevant reasons.
AWi 04.02.2011
HARTING Industrial Cable 8-wire Cat. 6
A
PUR
Technical Characteristics
Frequency
MHz
Attenuation
dB/100m
NEXT
dB
PS NEXT
dB
EL FEXT
dB
PS EL FEXT
dB
Return Loss
dB
1 3.1 75.63 72.3 67.8 64.8 20
4 5.7 66.3 63.3 55.8 52.8 23
8 8 61.8 58.8 49.7 46.7 24.5
10 8.9 60.3 57.3 47.8 44.8 25
16 11.2 57.2 54.2 43.7 40.7 25
20 12.6 55.8 52.8 41.8 38.8 25
25 14.1 54.3 51.3 39.8 36,8 24.2
31.25 15.8 52.8 49.9 37.9 34.9 23.3
62.5 22.5 48.4 45.4 31.9 28.9 20.7
100 28.7 45.3 42.3 27.8 24.8 19
200 41.4 40.8 37.8 21.8 18.8 16.4
250 46.6 39.3 36.3 19.8 16.8 15.6
300 51.4 38.1 35.1 18.3 15.3 15.6
400 60.1 36.3 33.3 15.8 12.8 15.6
500 67.9 34.8 31.8 13.8 10.8 15.6
acc. to IEC 61156-6
All data given are in line with the actual state of art and therefore not binding.
HARTING reserves the right to modify designs without giving the relevant reasons.
