DATA SHEET
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
WIDE BAND SPDT SWITCH
CMOS INTEGRATED CIRCUIT
μ
PD5713TK
Document No. PU10627EJ01V0DS (1st edition)
Date Published September 2006 NS CP(K)
Printed in Japan
2006
DESCRIPTION
The
μ
PD5713TK is a CMOS MMIC for wide band SPDT (Single Pole Double Throw) switch which were developed
for mobile communications, wireless communications and another general-purpose RF switching application.
This device can operate frequency from 0.05 to 2.5 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin lead-less minimold (1511) package. And this package is able to high-density
surface mounting.
FEATURES
Supply voltage : VDD = 1.8 to 3.6 V (2.8 V TYP.)
Switch control voltage : Vcont (H) = 1.8 to 3.6 V (2.8 V TYP.)
: Vcont (L) = 0.2 to +0.4 V (0 V TYP.)
Low insertion loss : Lins1 = 0.6 dB TYP. @ f = 0.05 to 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: Lins2 = 0.8 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: Lins3 = 0.95 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
High isolation : ISL1 = 32.5 dB TYP. @ f = 0.05 to 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: ISL2 = 25 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: ISL3 = 22.5 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
Handling power : Pin (1 dB) = +21.0 dBm TYP. @ f = 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: Pin (0.1 dB) = +17.0 dBm TYP. @ f = 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
High-density surface mounting : 6-pin lead-less minimold package (1.5 × 1.1 × 0.55 mm)
APPLICATIONS
• Mobile communications
• Wireless communications
Another general-purpose RF switching applications
ORDERING INFORMATION
Part Number Order Number Package Marking Supplying Form
μ
PD5713TK-E2
μ
PD5713TK-E2-A 6-pin lead-less minimold
(1511) (Pb-Free)
C3Q Embossed tape 8 mm wide
Pin 1, 6 face the perforation side of the tape
Qty 5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order:
μ
PD5713TK
Data Sheet PU10627EJ01V0DS
2
μ
PD5713TK
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin No. Pin Name
1 OUTPUT1
2 GND
3 OUTPUT2
4 Vcont
5 INPUT
(Top View)
1
2
34
5
6
C3Q
(Bottom View)
6
5
43
2
1
(Top View)
1
2
34
5
6
6 VDD
TRUTH TABLE
Vcont INPUTOUTPUT1 INPUTOUTPUT2
Low OFF ON
High ON OFF
ABSOLUTE MAXIMUM RATINGS (TA = +25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
Supply Voltage VDD 0.5 to +4.6 V
Switch Control Voltage Vcont 0.5 to +4.6 V
Voltage Difference Vcont (H)
VDD
+0.5 V
Input Power Pin +23 dBm
Operating Ambient Temperature TA 45 to +85 °C
Storage Temperature Tstg 55 to +150 °C
RECOMMENDED OPERATING RANGE (TA = +25°C, unless otherwise specified)
Parameter Symbol MIN. TYP. MAX. Unit
Supply Voltage VDD +1.8 +2.8 +3.6 V
Switch Control Voltage (H) Vcont (H) +1.8 +2.8 +3.6 V
Switch Control Voltage (L) Vcont (L) 0.2 0 +0.4 V
Remark VDD 0.4 V Vcont (H) VDD + 0.2 V
Data Sheet PU10627EJ01V0DS 3
μ
PD5713TK
ELECTRICAL CHARACTERISTICS
(TA = +25°C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, DC cut capacitors = 1 000 pF, unless
otherwise specified)
Parameter Symbol Test Conditions MIN. TYP. MAX. Unit
Insertion Loss 1 Lins1 f = 0.05 to 1.0 GHz 0.6 0.8 dB
Insertion Loss 2 Lins2 f = 1.0 to 2.0 GHz 0.8 1.0 dB
Insertion Loss 3 Lins3 f = 2.0 to 2.5 GHz 0.95 1.2 dB
Isolation 1 ISL1 f = 0.05 to 1.0 GHz 30 32.5 dB
Isolation 2 ISL2 f = 1.0 to 2.0 GHz 22 25 dB
Isolation 3 ISL3 f = 2.0 to 2.5 GHz 20 22.5 dB
Input Return Loss RLin f = 0.05 to 2.5 GHz 13 17 dB
Output Return Loss RLout f = 0.05 to 2.5 GHz 13 17 dB
0.1 dB Loss Compression Pin (0.1 dB) f = 1.0 GHz +13.0 +17.0 dBm
Input Power Note 1
1 dB Loss Compression Pin (1 dB) f = 1.0 GHz +21.0 dBm
Input Power Note 2
Supply Current IDD VDD = Vcont = 2.8 V, RF off 0.01 1.0
μ
A
Switch Control Current Icont VDD = Vcont = 2.8 V, RF off 0.01 1.0
μ
A
Switch Control Speed tSW f = 1.0 GHz 30 100 ns
Notes 1. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of
linear range.
2. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear
range.
Caution This device is used it is necessary to use DC cut capacitors.
The value of DC cut capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system.
Data Sheet PU10627EJ01V0DS
4
μ
PD5713TK
EVALUATION CIRCUIT
VDD Vcont
OUTPUT1 OUTPUT2
INPUT
1 000 pF1 000 pF
456
321
C0C0
C0
Remark C0 = 1 000 pF
Caution This IC has pull down resistance between RF line and GND, witch fixes electric potential of RF line
to 0 V, then the IC cannot be used for DC switching.
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
Data Sheet PU10627EJ01V0DS 5
μ
PD5713TK
ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD
C5
C4
6pinL2MM SPDT SW
Vc2
Vc1
IN
OUT 2
OUT 1
C2
C2
V
cont
OUTPUT2
INPUT
OUTPUT1
V
DD
C3Q
C1
C2
C1
C1
C3
C1
USING THE NEC EVALUATION BOARD
Symbol Values
C1, C2, C3 1 000 pF
C4, C5 1 000 pF
Data Sheet PU10627EJ01V0DS
6
μ
PD5713TK
TYPICAL CHARACTERISTICS
(TA = +25°C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, Pin = 0 dBm, DC cut capacitors = 1 000 pF,
unless otherwise specified)
2.5
2.0
1.0
1.5
0.5
0
–1.0
–1.5
–2.501.0 2.0 3.0
–0.5
–2.0
0.5 1.5 2.5
2
1
345
1: –0.584 dB
0.5 GHz
2: –0.659 dB
1.0 GHz
3: –0.730 dB
1.5 GHz
4: –0.811 dB
2.0 GHz
5: –0.924 dB
2.5 GHz
2.5
2.0
1.0
1.5
0.5
0
–1.0
–1.5
–2.501.0 2.0 3.0
–0.5
–2.0
0.5 1.5 2.5
2
1
345
1: –0.584 dB
0.5 GHz
2: –0.653 dB
1.0 GHz
3: –0.731 dB
1.5 GHz
4: –0.826 dB
2.0 GHz
5: –0.968 dB
2.5 GHz
40
30
10
20
0
–10
–30
–40
–6001.0 2.0 3.0
–20
–50
0.5 1.5 2.5
2
1345
1: –38.2 dB
0.5 GHz
2: –31.7 dB
1.0 GHz
3: –27.4 dB
1.5 GHz
4: –23.9 dB
2.0 GHz
5: –22.4 dB
2.5 GHz
40
30
10
20
0
–10
–30
–40
–6001.0 2.0 3.0
–20
–50
0.5 1.5 2.5
2
1345
1: –39.0 dB
0.5 GHz
2: –31.8 dB
1.0 GHz
3: –27.9 dB
1.5 GHz
4: –24.4 dB
2.0 GHz
5: –21.6 dB
2.5 GHz
40
30
10
20
0
–10
–30
–40
–6001.0 2.0 3.0
–20
–50
0.5 1.5 2.5
2
1
345
1: –26.0 dB
0.5 GHz
2: –21.5 dB
1.0 GHz
3: –19.5 dB
1.5 GHz
4: –18.3 dB
2.0 GHz
5: –18.9 dB
2.5 GHz
40
30
10
20
0
–10
–30
–40
–6001.0 2.0 3.0
–20
–50
0.5 1.5 2.5
2
1
34 5
1: –26.4 dB
0.5 GHz
2: –21.8 dB
1.0 GHz
3: –19.6 dB
1.5 GHz
4: –18.5 dB
2.0 GHz
5: –18.3 dB
2.5 GHz
INPUT–OUTPUT1
INSERSION LOSS vs. FREQUENCY
Insersion Loss Lins (dB)
Frequency f (GHz)
INPUT–OUTPUT2
INSERSION LOSS vs. FREQUENCY
Insersion Loss Lins (dB)
Frequency f (GHz)
Frequency f (MHz)
INPUT–OUTPUT1
ISOLATION vs. FREQUENCY
Isolation ISL (dB)
Frequency f (MHz)
INPUT–OUTPUT2
ISOLATION vs. FREQUENCY
Isolation ISL (dB)
Frequency f (MHz)
INPUT–OUTPUT1
INPUT RETURN LOSS vs. FREQUENCY
Input Return Loss RLin (dB)
Frequency f (MHz)
INPUT–OUTPUT2
INPUT RETURN LOSS vs. FREQUENCY
Input Return Loss RLin (dB)
Remark The graphs indicate nominal characteristics.
Data Sheet PU10627EJ01V0DS 7
μ
PD5713TK
40
30
10
20
0
–10
–30
–40
–6001.0 2.0 3.0
–20
–50
0.5 1.5 2.5
2
1
345
1: –23.6 dB
0.5 GHz
2: –22.4 dB
1.0 GHz
3: –19.0 dB
1.5 GHz
4: –19.4 dB
2.0 GHz
5: –18.5 dB
2.5 GHz
+35
+30
+20
+25
+15
+10
+5
+5 +15 +25 +35
+10 +20 +30
f = 1 GHz
40
30
10
20
0
–10
–30
–40
–6001.0 2.0 3.0
–20
–50
0.5 1.5 2.5
2
1
345
1: –24.4 dB
0.5 GHz
2: –22.9 dB
1.0 GHz
3: –20.0 dB
1.5 GHz
4: –20.6 dB
2.0 GHz
5: –19.4 dB
2.5 GHz
INPUT–OUTPUT1
OUTPUT RETURN LOSS vs. FREQUENCY
Output Return Loss RL
out
(dB)
Frequency f (MHz)
INPUT–OUTPUT2
OUTPUT RETURN LOSS vs. FREQUENCY
Output Return Loss RL
out
(dB)
Frequency f (MHz)
OUTPUT POWER vs. INPUT POWER
Output Power P
out
(dBm)
Input Power P
in
(dBm)
Remark The graphs indicate nominal characteristics.
Data Sheet PU10627EJ01V0DS
8
μ
PD5713TK
MOUNTING PAD DIMENSIONS
6-PIN LEAD-LESS MINIMOLD (1511) (UNIT: mm)
0.480.48
1.10
0.45
0.26
Remark The mounting pad layouts in this document are for reference only.
Data Sheet PU10627EJ01V0DS 9
μ
PD5713TK
PACKAGE DIMENSIONS
6-PIN LEAD-LESS MINIMOLD (1511) (UNIT: mm)
0.48±0.050.48±0.05
1.5±0.1
1.3±0.05
1.1±0.1
0.55±0.03
0.11+0.1
–0.05 0.16±0.05
0.9±0.10.2±0.1
(Bottom View)
(Top View)
Data Sheet PU10627EJ01V0DS
10
μ
PD5713TK
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Soldering Conditions Condition Symbol
Infrared Reflow Peak temperature (package surface temperature) : 260°C or below
Time at peak temperature : 10 seconds or less
Time at temperature of 220°C or higher : 60 seconds or less
Preheating time at 120 to 180°C : 120±30 seconds
Maximum number of reflow processes : 3 times
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
IR260
Wave Soldering Peak temperature (molten solder temperature) : 260°C or below
Time at peak temperature : 10 seconds or less
Preheating temperature (package surface temperature) : 120°C or below
Maximum number of flow processes : 1 time
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
WS260
Partial Heating Peak temperature (terminal temperature) : 350°C or below
Soldering time (per side of device) : 3 seconds or less
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
HS350
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PU10627EJ01V0DS 11
μ
PD5713TK
The information in this document is current as of September, 2006. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
M8E 02. 11-1
(1)
(2)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
"Standard":
"Special":
"Specific":
0604
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: contact@ncsd-hk.necel.com
Hong Kong Head Office TEL: +852-3107-7303 FAX: +852-3107-7309
Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
Korea Branch Office TEL: +82-2-558-2120 FAX: +82-2-558-5209
NEC Electronics (Europe) GmbH http://www.eu.necel.com/
TEL: +49-211-6503-0 FAX: +49-211-6503-1327
California Eastern Laboratories, Inc. http://www.cel.com/
TEL: +1-408-988-3500 FAX: +1-408-988-0279
Compound Semiconductor Devices Division
NEC Electronics Corporation
URL: http://www.ncsd.necel.com/
For further information, please contact
μ
PD5713TK
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.