Series 71 Aluminum Extractor SERIES 71 ALUMINUM EXTRACTOR MATERIALS AND FINISH Board Module Assembly Material: 6061-T6 Aluminum alloy per QQ-A-250/8 Finish: Customer specified WEIGHT 07 891046 Aluminum: .05 oz. (1.42 g) Stainless Steel: .15 oz. (4.25 g) Pin included Left-hand shown APPLICATION DATA Two (2) extractors are recommended per board. (One "L" and one "R" per printed circuit board). Provides extraction travel of 11.4 (.45) mininum, with a mechanical advantage of 4.5:1 Extractor width 4.6 (.18) 6.9 (.29) 38.1 (1.50) 3.0 (.12) R 9.4 (.37) 9.14 (.360) 2.39 +.05 \ -.02 (.094 +.002 \ -.001) Gap (see table) 2.3 (.09) Standard Easy Grasp Style nVent.com/SCHROFF 1-800-854-7086 6.4 (.25) 25.4 (1.00) 2.77 (.109) Dia. SERIES 71 ALUMINUM EXTRACTOR The bent leg option is required when using the extractor with Lok Tainers for PCB retention within sheet metal (non-cold wall) applications. Additionally, if using a lever actuated Lok Tainer, the actuator tab will work in conjunction with the lever to release the PCB. Part Number Code Series 71 Extractor 71 ____________________ ___________________[blank] Handle Straight_____________________________ S Bent __________________[blank] Material ______________________ Board Thickness _______________________________________ Left _____________________________________________ L Right ____________________________________________ R Actuator Tab option _____________ A ________[blank] Finish __________________________________________ Bent ESD Symbol _________________________ BL ___________[blank] ______ _________[blank] nVent may modify standard parts without prior notice to or approval from customers. These modifications may change product appearance, but will not have a detrimental effect on form, fit or function. (c)2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.