Series 71 Aluminum Extractor
nVent.com/SCHROFF 1-800-854-7086
SERIES 71 ALUMINUM EXTRACTOR
MATERIALS AND FINISH
Material:
6061-T6 Aluminum alloy per QQ-A-250/8
Finish:
Customer specied
WEIGHT
Aluminum: .05 oz. (1.42 g)
Stainless Steel: .15 oz. (4.25 g)
APPLICATION DATA
Two (2) extractors are recommended per board.
(One “L” and one “R” per printed circuit board).
Provides extraction travel of 11.4 (.45) mininum,
with a mechanical advantage of 4.5:1
Board Module
Assembly
Pin included
Left-hand shown
89104607
6.9 38.1
(1.50)
3.0
(.12) 25.4
(1.00)
R
9.14
(.360)
2.39 +.05 \ -.02
(.094 +.002 \ -.001)
Gap
(see table)
2.3 (.09)
Standard
Easy Grasp Style
Extractor width
4.6
(.18)
6.4
(.25)
9.4
(.37)
2.77
(.109)
Dia.
(.29)
SERIES 71 ALUMINUM EXTRACTOR
nVent may modify standard parts without prior notice to or approval from customers. These modications may change product appearance, but will not have a
detrimental effect on form, t or function. ©2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its aliates. All other trademarks
are the property of their respective owners. nVent reserves the right to change specications without notice.
Part Number Code
Series 71 Extractor 71
Handle
Straight_____________________________ S
Bent __________________[blank]
Material
______________________
Board Thickness
_______________________________________
Left _____________________________________________ L
Right ____________________________________________ R
Actuator Tab option
_____________ A
________[blank]
Finish
__________________________________________
Bent _________________________ BL
___________[blank]
ESD Symbol
______
_________[blank]
____________________
___________________[blank]
The bent leg option is required when using the extractor with Lok Tainers for PCB retention
within sheet metal (non-cold wall) applications. Additionally, if using a lever actuated Lok Tainer,
the actuator tab will work in conjunction with the lever to release the PCB.
