Pressure Gauges Monitor pressures in compressed air systems for optimum efficiency Pressure Gauges R /8 , G 1/8 A, 1/4 x 18 N.P.T. 1 Dual calibrated dials, available for direct or panel mounting Choice of pressure ranges Conform to BS 1780 : Part 2, Industrial Class 2 Range includes Miniature type, 40 mm, pressure gauge suitable for use with Norgren Olympian Series 10 and miniature units Technical Data Medium: Compressed air, oil and gases or liquids which do not corrode copper alloys Operating Temperature: -20C* to +60C *Consult our Technical Service for use below +2C Operating Pressure: 0 - 1,6 bar 0 - 4 bar 0 - 6 bar 0 - 10 bar 0 - 25 bar Port Connections R1/8, G1/8A, 1/4 x 18 N.P.T. Alternative Models Stainless steel case with brass movements Materials Steel, plastic or stainless steel body. Glass or plastic face. Copper/brass or stainless steel movements. Full details available on request. Ordering Information To order a standard Pressure Gauge, quote model number from table overleaf. For non-standard models please consult our Technical Service. 1/90 8.11.031.01 Pressure Gauges Standard Pressure Gauges Connection/Type Centre back Centre back (miniature) Centre back (panel mounted) Bottom Pressure Range (bar) 0 - 1,6 0-4 0-6 0 - 10 0 - 25 0 - 25 0 - 25 0 - 10 0-6 0 - 10 0-4 0 - 1,6 0 - 25 0 - 10 0-6 0-4 0 - 1,6 0 - 1,6 0-4 0-6 0 - 10 0 - 25 Port Connection Nominal Diameter Model Weight kg R1/8 R1/8 R1/8 R1/8 R1/8 1 /4 x 18 N.P.T. R1/8 1 /4 x 18 N.P.T. 1 /4 x 18 N.P.T. R1/8 R1/8 R1/8 G1/8A G1/8A G1/8A G1/8A G1/8A R1/8 R1/8 R1/8 R1/8 R1/8 50 50 50 50 50 40 40 40 40 40 40 40 62 62 62 62 62 50 50 50 50 50 18-013-010 18-013-011 18-013-012 18-013-013 18-013-014 18-013-905* 18-013-908 18-013-909* 18-013-913* 18-013-989 18-013-990 18-013-991 18-013-992 18-013-993 18-013-994 18-013-995 18-013-996 18-013-024 18-013-025 18-013-026 18-013-027 18-013-028 0,83 0,83 0,83 0,83 0,83 0,93 0,67 0,80 0,21 0,05 0,05 0,04 0,14 0,13 0,14 0,13 0,14 0,67 0,63 0,86 0,87 0,90 Actual case diameter may exceed nominal diameter by 5 mm. *Stainless steel cases with stainless steel movements for 22 Series range. All stainless steel gauges are not strictly to NACE standard MR-01-75. Non-standard Models For Pressure Gauges with stainless steel cases and brass movements or other options, please consult our Technical Service. Centre Back Mounted Pressure Gauges 18-013-010 18-013-011 18-013-012 18-013-013 18-013-014 14.2 + - 0.2 7.0 B50 14 8 max 8.11.031.02 33 4 R1/8 R1/8 R1/8 R1/8 R1/8 Pressure Gauges Miniature Centre Back Mounted Pressure Gauges 18-013-905 18-013-908 18-013-909 18-013-913 18-013-989 18-013-990 18-013-991 1 18-013-992 18-013-993 18-013-994 18-013-995 18-013-996 G1/8 A G1/8 A G1/8 A G1/8 A G1/8 A /4 x 18 N.P.T. R1/8 1 /4 x 18 N.P.T. 1 /4 x 18 N.P.T. R1/8 R1/8 R1/8 42.3 B 40 24 14 max 12.7 Centre Back Panel Mounted Pressure Gauges 9.5 max 6 B50 B52 B62 23 57 max 1/90 8.11.031.03 Pressure Gauges Bottom Mounted Pressure Gauges 18-013-024 18-013-025 18-013-026 18-013-027 18-013-028 B50 12.7 32.5 28 R 1/8 9.5 14 Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under `Technical Data'. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN MARTONAIR. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. 8.11.031.04 R1/8 R1/8 R1/8 R1/8 R1/8