!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. Piezoelectric Sound Components Murata Manufacturing Co., Ltd. Cat.No.P37E-19 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P37E19.pdf 04.8.27 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CONTENTS 1 PIEZORINGERr, CERAMITONEr, CERAMIPHONEr and "PIEZORINGER", in this catalog are the trademarks of Murata Manufacturing Co., Ltd. Part Numbering 2 Application Matrix 5 1 Piezoelectric Diaphragms 6 External Drive Type 6 Self Drive Type 7 Piezoelectric Diaphragms Notice 8 2 Piezoelectric Sounders External Drive Pin Type 9 3 Piezoelectric Sounders External Drive Pin Type Taping 14 4 Piezoelectric Sounders External Drive Lead Wire Type 16 5 Piezoelectric Sounders External Drive SMD Type 18 Piezoelectric Sounders (External Drive) Circuit/Notice 20 6 7 8 9 10 Piezoelectric Ringers (PIEZORINGERr) 21 Pin Type 22 Lead Wire Type 22 Piezoelectric Ringers (PIEZORINGERr) Notice 24 Piezoelectric Sounders Self Drive Pin Type 25 Piezoelectric Sounders (Self Drive) Notice 26 Piezoelectric Buzzers 27 Pin Type 28 Lead Wire Type 28 Piezoelectric Buzzers Notice 29 Piezoelectric Receiver (CERAMIPHONEr) 30 Piezoelectric Receiver Circuit/Notice 32 Piezoelectric Speakers (CERAMITONEr) 33 Piezoelectric Speakers (CERAMITONEr) Notice 35 2 3 4 5 6 7 8 9 Package 36 * The RoHS compliance means that we judge from EU Directive 2002/95/EC the products do not contain lead, cadmium, mercury, hexavalent chromium, PBB and PBDE, except exemptions stated in EU Directive 2002/95/EC annex and impurities existing in natural world. * This statement does not insure the compliance of any of the listed parts with any laws or legal imperatives developed by any EU members individually with regards to the RoHS Directive. Recycled Paper 10 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. o Part Numbering Piezoelectric Sounders/Piezoelectric Buzzers/Piezoelectric Ringers (PIEZORINGERr) (Part Number) PK M 13 P YH 40 00 P -A0 q w e r t y u i o !0 E qProduct ID uOscillating Frequency Type Product ID PK Piezoelectric Sound Components wProduct Code Oscillating Frequency Type 40 Two digits figures express Oscillating Frequency type. If there is no decimal point, the decimal point is omitted. Code Product M Sounder, Ringer B Buzzer iIndividual Specification Code Code 00 eOuter Dimensions Individual Specification Code Two digits express specific specification in characteristics. Expressed by two figures in mm. Ex.) Code Outer Dimensions 13 o12.6mm rDrive Code Drive E External-Drive S Self-Drive tOuter Electrode Style Code Outer Electrode Style P Pin Type W Lead Wire Type yStructure Code Structure Tp Standing Type Pp Flat Type Auto-assemble Yp Flat Type/Available for Taping Cp Flat Type/Semi-auto-assemble p Exclude above mentioned p means specification of outer electrode. 2 oSpecial Quality Guarantee Code Special Quality Guarantee P Post Plated Terminal Y Blank !0Packaging Code Packaging -B0 Bulk -A0 Radial Taping -M0 Magazine Radial taping or magazines are not available for all types. Please contact us. Packaging Code is blank in the case of types that radial taping or magazines are not available. P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. SMD Piezoelectric Sounder (Part Number) PK LCS 1212 E 40 01 -R1 q w e r t y u qProduct ID tOscillating Frequency Type Code Product ID PK Piezoelectric Sound Components 40 Oscillating Frequency Type Two digits figures express Oscillating Frequency type. wProduct Code Product LCS SMD Sounder yIndividual Specification Code eDimensions Code Outer Dimensions 1212 p12mm Drive E External Drive Individual Specification Code 01 Two digits express specific specification in characteristics. uPackaging rDrive Code Code Code Packaging -R1 Plastic taping SMD Piezoelectric Receiver (CERAMIPHONEr) (Part Number) PK LCD 1212 R 10 00 -R1 q w e r t y u qProduct ID tOscillating Frequency Type Code Product ID PK Piezoelectric Sound Components 10 Oscillating Frequency Type Two digits figures express Oscillating Frequency type. wProduct Code Product LCD SMD Receiver eDimensions Code Outer Dimensions 1212 p12mm rDrive Code Drive R Receiver yIndividual Specification Code Code Individual Specification Code 00 Two digits express specific specification in characteristics. uPackaging Code Packaging -R1 Plastic taping 3 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Speakers (CERAMITONEr ) (Part Number) W H 07 01 B w e r t y u i o VS B q qProduct ID 35 E ySpecification of Outer Electrode Code Product ID VS Piezoelectric Speakers Specification of Outer Electrode H available for RoHS e non-compliant with the EU RoHS Directive wProduct uResonant Frequency Type Code Product B Piezoelectric Diaphragms eOuter Dimensions Code Outer Dimensions 35 o35mm 50 o50mm Code Resonant Frequency 03 1st Resonant Frequency : 300Hz 07 1st Resonant Frequency : 700Hz iIndividual Specification Code Code Individual Specification Code 01 Characteristics, Style, others rDrive oNumbers of Ceramic Code Drive E External Drive Numbers of Ceramic Code B tOuter Electrode Style Code Outer Electrode Style W Lead Wire Type Two Elements (The code is omitted when there is only one element.) Piezoelectric Diaphragms (Part Number) 7 N B q w e qProduct ID -31R2 DM -1R5 A r t y u i o 10 yResonant Frequency Type Code Product ID 7 Ceramic Material -1R5 wProduct (1) Resonant Frequency (kHz) A hyphen (-) and three digits alphanumerics express resonant frequency. A decimal point is expressed by the capital letter "R". If there is no decimal point, the decimal point is omitted. Code Metal Plate Material B Brass N Nickel Alloy M Ni Plated Iron Code S SUS C With Feedback Electrode e Without Feedback Electrode uWith Feedback Electrode With Feedback Electrode eProduct (2) Code Product B Piezoelectric Diaphragms rMetal Plate Diameter Code -31R2 Metal Plate Diameter A hyphen (-) plus four digits alphanumerics express metal plate outer dimensions. A decimal point is expressed by the capital letter "R". iProduct Specification Code Product Specification A With lead (non-compliant with the EU RoHS Directive) L With lead (available for RoHS) e No lead (omitted) oIndividual Specification Code Code If there is no decimal point, the decimal point code is omitted. 10 tForm of Piezoelectric Style Code Form of Piezoelectric Style DM Two digits express shape of ceramics. For an Ag electrode, this digit remains blank, the corresponding code is omitted. 4 Individual Specification Code These digits express a lead length, lead number, and presence/absence of a connector. If the product has no individual specification, the corresponding code is omitted. P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Application Matrix Application External Drive Type Self Drive Type External Drive Type Piezoelectric Sounder Piezoelectric Diaphragm Part Number Medical Gas Digital TeleWatch Clock EquipAlarm Camera phone ment Toy Air InstruMicroBar NoteFan DVDment wave CondiCode Printer PC Heater Player Cluster Oven tioner PDA Scanner 7BB-12-9 o o o o o o 7BB-15-6 o o o o o 7BB-20-3 o o o o o o 7BB-20-6 o o o o o 7BB-20-6L0 o o o o 7BB-27-4 o o o o o 7BB-27-4L0 o o o o o 7BB-35-3 o o o o 7BB-35-3L0 o o o o 7BB-41-2 o 7BB-41-2L0 o 7NB-31R2-1 o o 7BB-20-6C o o o 7BB-20-6CL0 o o o 7BB-27-4C o o o o 7BB-27-4CL0 o o o o 7BB-35-3C o o o 7BB-35-3CL0 o o o 7BB-41-2C o 7BB-41-2CL0 o 7SB-34R7-3C o PKM13EPYH4000-A0 o o o o o o o o o o o o PKM13EPYH4002-B0 o o o o o o o o o o o o o PKM17EPP-2002-B0 o o o o o o o o o o o PKM17EPPH4001-B0 o o o o o o o o o o o PKM17EWH2001 o o o o o o o o o o PKM22EPH2001 o o o o o o o PKM22EPPH2001-B0 o o o o o o o o o o PKM22EPPH4001-B0 o o o o o o o o o o PKM22EPPH4005-B0 o o o o o o o o o PKM22EPPH4007-B0 o o o o o o o o o o PKM22EPTH2001-B0 o o o o o o PKM17EWH4000 o o o o o o o o o o PKLCS1212E4001-R1 o o o o o o o o PKLCS1212E40A1-R1 o PKM24SPH3805 o o o o o o o o o PKM30SPTH2501-B0 o o o PKB24SPCH3601-B0 o o o o o o o o Piezoelectric PKB24SWH3301 Buzzer PKB30SPCH2001-B0 o o o PKB30SPCH3001-B0 Self Drive Type o PKM30SPTH2001-B0 o o o o o o o o o o o o o o o o o o o o o PKM33EPH1201C o Piezoelectric PKM34EWH1101C Ringer PKM34EWH1201C o o PKM44EWH1001C o Piezoelectric PKLCD1212R1000-R1 Receiver o Piezoelectric VSB35EWH0701B Speaker VSB50EWH0301B o o o o There are various applications besides those listed in the above table, including: Fire Alarm, Burglar Alarm, Laundry Machine, Bath, Interphone, Chime, Pager, Back Buzzer, ME Instruments, Measuring Instruments, Vending Machine, Calculator, Automobile, Communication Radio, Hemadynamometer, Thermometer, Running Meter, Facsimile, Audio Timer, Automatic Controlling Devices. 5 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Sound Components 1 Piezoelectric Diaphragms Features 1. Extremely clear sound 2. Ultra thin and light weight 3. No contacts: therefore, no noise and highly reliable 4. Low power consumption for voltage type oD oa Red ob Black Applications t Clocks/Pagers/Calculators/Washing machine/ Various alarms (Burglar alarms, etc.) T External Drive Type 6 Part Number Resonant Resonant Capacitance Plate Size Element Size Electrode Size Thickness Plate Thickness Frequency Impedance dia. D dia. a dia. b T t (nF) (kHz) (ohm) (mm) (mm) (mm) (mm) (mm) 7BB-12-9 9.0 1.0kHz 1000 max. 8 30% [1kHz] 12.0 9.0 8.0 0.22 0.10 Brass 7BB-15-6 6.0 1.0kHz 350 max. 10 30% [1kHz] 15.0 10.0 9.0 0.22 0.10 Brass 7BB-20-3 3.6 0.6kHz 500 max. 20 30% [1kHz] 20.0 14.0 12.8 0.22 0.10 Brass 7BB-20-6 6.3 0.6kHz 350 max. 10 30% [1kHz] 20.0 14.0 12.8 0.42 0.20 Brass 7BB-20-6L0 6.3 0.6kHz 1000 max. 10 30% [1kHz] 20.0 14.0 12.8 0.42 0.20 Brass (with Lead Wire :AWG32 Length 50mm) 7BB-27-4 4.6 0.5kHz 200 max. 20 30% [1kHz] 27.0 19.7 18.2 0.54 0.30 Brass 7BB-27-4L0 4.6 0.5kHz 300 max. 20 30% [1kHz] 27.0 19.7 18.2 0.54 0.30 Brass (with Lead Wire :AWG32 Length 50mm) 7BB-35-3 2.8 0.5kHz 200 max. 30 30% [1kHz] 35.0 25.0 23.0 0.53 0.30 Brass 7BB-35-3L0 2.8 0.5kHz 200 max. 30 30% [1kHz] 35.0 25.0 23.0 0.53 0.30 Brass (with Lead Wire :AWG32 Length 50mm) 7BB-41-2 2.2 0.3kHz 250 max. 30 30% [1kHz] 41.0 25.0 23.0 0.63 0.40 Brass 7BB-41-2L0 2.2 0.3kHz 300 max. 30 30% [1kHz] 41.0 25.0 23.0 0.63 0.40 Brass (with Lead Wire :AWG32 Length 50mm) 7NB-31R2-1 1.3 0.5kHz 300 max. 40 30% [120Hz] 31.2 19.7 18.2 0.22 0.10 Iron Nickel Alloy Plate Material P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. 1 Red oD oa ob Black Blue t T Self Drive Type Part Number Resonant Resonant Capacitance Plate Size Element Size Electrode Size Thickness Plate Thickness Frequency Impedance dia. D dia. a dia. b T t (nF) (kHz) (ohm) (mm) (mm) (mm) (mm) (mm) 7BB-20-6C 6.3 0.6kHz 500 max. 8.5 30% [1kHz] 20.0 14.0 12.8 0.42 0.20 Brass 7BB-20-6CL0 6.3 0.6kHz 800 max. 8.5 30% [1kHz] 20.0 14.0 12.8 0.42 0.20 Brass (with Lead Wire :AWG32 Length 50mm) 4.6 0.5kHz 200 max. 18 30% [1kHz] 27.0 19.7 18.2 0.54 0.30 Brass 7BB-27-4CL0 4.6 0.5kHz 350 max. 18 30% [1kHz] 27.0 19.7 18.2 0.54 0.30 Brass (with Lead Wire :AWG32 Length 50mm) 2.8 0.5kHz 200 max. 26 30% [1kHz] 35.0 25.0 23.0 0.53 0.30 Brass 7BB-35-3CL0 2.8 0.5kHz 200 max. 26 30% [1kHz] 35.0 25.0 23.0 0.53 0.30 Brass (with Lead Wire :AWG32 Length 50mm) 2.2 0.3kHz 250 max. 24 30% [1kHz] 41.0 25.0 23.0 0.63 0.40 Brass 7BB-41-2CL0 2.2 0.3kHz 350 max. 24 30% [1kHz] 41.0 25.0 23.0 0.63 0.40 Brass (with Lead Wire :AWG32 Length 50mm) 7SB-34R7-3C 3.1 0.3kHz 150 max. 24 30% [1kHz] 34.7 25.0 23.4 0.50 0.25 Stainless 7BB-27-4C 7BB-35-3C 7BB-41-2C Plate Material Node Diameter Part Number Node Diameter (mm) 7BB-20-6C 13.5 7BB-27-4C 17.5 7BB-35-3C 22.5 7BB-41-2C 26.5 * Sound diaphragms without feedback electrode also have the same node diameters. 7 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Diaphragms Notice 1 Notice (Soldering and Mounting) 1. Applying load on the center area of the diaphragm may cause cracking in the ceramic element. When the diaphragm is supported by the edge, the load should be only applied around the edge. 2. Please consult with Murata or Murata representative, if soldering of the component is needed. Notice (Handling) 1. Please do not touch the component with bare hand because electrode may be corroded. 2. The component may be damaged if mechanical stress exceeding specifications is applied. 3. Take care to protect operating circuit from surge voltage resulting from excessive force, falling, shock or temperature change. 4. If DC voltage is applied to the component, silver migration may occur. Please pay full attention to avoid subjecting the component to DC voltage for long periods. 5. The resistor should be used as shown in Fig. A. A suitable resistance value should be chosen, preferably 1k to 2k. Instead of this measure, a diode may also be applied as shown in Fig. B. R IC IC Fig. A 6. Avoid excessive pulling of lead wire because wire may break or soldering point may come off. 8 Fig. B P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Sound Components Piezoelectric Sounders External Drive Pin Type 2 Now microcomputers are widely used for microwave ovens, air conditioners, cars, toys, timers, and other alarm equipment. Externally driven piezoelectric sounders are used in digital watches, electronic calculators, telephones and other equipment. They are driven by a signal (ex.: 2048Hz or 4096Hz) from an LSI and provide melodious sound. 0.9 6.9 3.5 2-0.5 5.0 2-1.0 7.5 Features 12.6 PKM13EPYH4002-B0 2-2.5 1. Low power consumption 2. No contacts therefore, no noise and highly reliable (In : mm) Tol. : 0.5 Applications 1. Telephone ringers 2. Various office equipment such as PPCs, printers and keyboards 3. Various home appliances such as microwave ovens 4. Confirmation sound of various audio equipment 1.2 3.5 8.6 R1.0 10.0 17.0 Terminal of marking side should be connected to hot side of D.C. 11.0 2-1.2 PKM17EPP-2002-B0 2-3.5 (in mm) Tol. : 0.5 12.6 1.2 7.0 4.7 22.0 2-3.5 5.0 5.0 6.0 11.0 2-1.2 8.3 10.0 17.0 4.0 (In : mm) Tol. : 0.5 Part Number PKM17EPPH4001-B0 PKM17EPPH4002-B0 23.0 1.6 0.8 PKM22EPH2001 6.5 3.5 R1.0 (In : mm) Tol. : 0.5 Part Number PKM22EPH2001 PKM22EPH2002 PKM22EPH2003 7.0 10.8 1.2 R1.0 0.8 0.8 10.0 10.0 22.0 22.0 2-1.2 10.0 10.0 2-1.2 2-3.5 PKM22EPPH2001-B0 4.0 8.0 12.0 1.2 PKM17EPPH4001-B0 8.0 20 R1.0 2-1.5 4.8 10.5 Hole Pattern (Reference) Part Number PKM22EPPH2001-B0 PKM22EPPH2002-B0 (In : mm) Tol. : 0.5 6.5 3.5 2-3.5 PKM22EPPH4001-B0 Part Number PKM22EPPH4001-B0 PKM22EPPH4002-B0 (In : mm) Tol. : 0.5 6.5 3.5 Continued on the following page. 9 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. 1.2 10.8 6.5 8.2 3.5 0.8 10.0 0.8 10.0 22.0 2-1.2 22.0 PKM22EPPH4005-B0 R8.5 2-3.5 2-3.5 0.5 0.5 18 18 10.0 1.2 3-1.5 3-1.7 2 1.2 R1.0 R1.0 PKM22EPPH4007-B0 Part Number PKM22EPPH4007-B0 PKM22EPPH4012-B0 0 12 0 12 (In : mm) Tol. : 0.5 (In : mm) Tol. : 0.5 6.5 3.5 4.0 1.0 7.5 15.5 26.5 R11.0 0.8 +0.1 -0 1.0 3.5 12.5 6.0 22.0 PKM22EPTH2001-B0 0.25 3.0 7.0 (in mm) Tol.:0.5 Part Number Sound Pressure Level (dB) Sound Pressure Level (Ref. only) (dB) Operating Voltage Range Capacitance (nF) Operating Temp. Range (C) Storage Temp. Range (C) PKM13EPYH4002-B0 70 min. [3Vp-p,4kHz,square wave,10cm] 70 min. [1Vrms,4kHz,sine wave,10cm] 30 Vp-p max. 5.5 30% [1kHz] -20 to +70 -30 to +80 PKM17EPP-2002-B0 70 min. [3Vo-p,2kHz,square wave,10cm] 70 min. [1Vrms,2kHz,sine wave,10cm] 25 Vo-p max. [with polarity] 34 30% [120Hz] -20 to +70 -30 to +80 PKM17EPPH4001-B0 72 min. [3Vp-p,4kHz,square wave,10cm] 72 min. [1Vrms,4kHz,sine wave,10cm] 25 Vp-p max. 7 30% [1kHz] -20 to +70 -30 to +80 PKM22EPH2001 75 min. [3Vp-p,2kHz,square wave,10cm] 75 min. [1Vrms,2kHz,sine wave,10cm] 25 Vp-p max. 17 30% [120Hz] -20 to +70 -30 to +80 PKM22EPPH2001-B0 70 min. [3Vp-p,2kHz,square wave,10cm] 70 min. [1Vrms,2kHz,sine wave,10cm] 25 Vp-p max. 19 30% [120Hz] -20 to +70 -30 to +80 PKM22EPPH4001-B0 75 min. [3Vp-p,4kHz,square wave,10cm] 75 min. [1Vrms,4kHz,sine wave,10cm] 25 Vp-p max. 12 30% [1kHz] -20 to +70 -30 to +80 PKM22EPPH4005-B0 75 min. [3Vp-p,4kHz,square wave,10cm] 75 min. [1Vrms,4kHz,sine wave,10cm] 25 Vp-p max. 12 30% [1kHz] -20 to +70 -30 to +80 PKM22EPPH4007-B0 85 min. [3Vp-p,4kHz,square wave,10cm] 85 min. [1Vrms,4kHz,sine wave,10cm] 25 Vp-p max. 12 30% [1kHz] -20 to +70 -30 to +80 PKM22EPTH2001-B0 70 min. [3Vp-p,2kHz,square wave,10cm] 70 min. [1Vrms,2kHz,sine wave,10cm] 25 Vp-p max. 19 30% [120Hz] -20 to +70 -30 to +80 10 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Freq. Response (Square Wave 3Vp-p, 10cm) PKM13EPYH4002-B0 PKM17EPP-2002-B0 100 100 Input Voltage : 3.00 Vp-p Square Distance : 10cm Input Voltage : 3.00 Vp-p Square Distance : 10cm 90 Sound Pressure Level (dB) Sound Pressure Level (dB) 90 80 70 60 80 60 50 50 40 100 500 1k Frequency (Hz) 5k 10k 40 100 20k PKM17EPPH4001-B0 Sound Pressure Level (dB) Sound Pressure Level (dB) 70 60 20k 5k 10k 20k 5k 10k 20k 5k 10k 20k 80 70 60 50 50 500 1k Frequency (Hz) 5k 10k 40 100 20k PKM22EPPH2001-B0 500 1k Frequency (Hz) PKM22EPPH4001-B0 100 100 Input Voltage : 3.00 Vp-p Square Distance : 10cm Input Voltage : 3.00 Vp-p Square Distance : 10cm 90 90 Sound Pressure Level (dB) Sound Pressure Level (dB) 10k 90 80 80 70 60 80 70 60 50 50 500 1k Frequency (Hz) 5k 10k 40 100 20k PKM22EPPH4005-B0 500 1k Frequency (Hz) PKM22EPPH4007-B0 110 100 Input Voltage : 3.00 Vp-p Square Distance : 10cm Input Voltage : 3.00 Vp-p Square Distance : 10cm 100 Sound Pressure Level (dB) 90 Sound Pressure Level (dB) 5k Input Voltage : 3.00 Vp-p Square Distance : 10cm Input Voltage : 3.00 Vp-p Square Distance : 10cm 80 70 60 90 80 70 60 50 40 100 1k Frequency (Hz) 100 90 40 100 500 PKM22EPH2001 100 40 100 2 70 500 1k Frequency (Hz) 5k 10k 20k 50 100 500 1k Frequency (Hz) Continued on the following page. 11 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Freq. Response (Square Wave 3Vp-p, 10cm) PKM22EPTH2001-B0 100 Input Voltage : 3.00 Vp-p Square Distance : 10cm Sound Pressure Level (dB) 90 2 80 70 60 50 40 100 500 1k Frequency (Hz) 5k 10k 20k Freq. Response (Sine Wave 1Vrms, 10cm) PKM13EPYH4002-B0 PKM17EPP-2002-B0 100 100 Input Voltage : 1.00 Vrms Sine Distance : 10cm Input Voltage : 1.00 Vrms Sine Distance : 10cm 90 Sound Pressure Level (dB) Sound Pressure Level (dB) 90 80 70 60 50 40 100 80 70 60 50 500 1k Frequency (Hz) 5k 10k 40 100 20k PKM17EPPH4001-B0 20k 90 Sound Pressure Level (dB) Sound Pressure Level (dB) 10k Input Voltage : 1.00 Vrms Sine Distance : 10cm Input Voltage : 1.00 Vrms Sine Distance : 10cm 80 70 60 80 70 60 50 50 500 1k Frequency (Hz) 5k 10k 40 100 20k PKM22EPPH2001-B0 500 1k Frequency (Hz) 5k 10k 20k 5k 10k 20k PKM22EPPH4001-B0 100 100 Input Voltage : 1.00 Vrms Sine Distance : 10cm Input Voltage : 1.00 Vrms Sine Distance : 10cm 90 Sound Pressure Level (dB) 90 Sound Pressure Level (dB) 5k PKM22EPH2001 90 80 70 60 50 40 100 1k Frequency (Hz) 100 100 40 100 500 80 70 60 50 500 1k Frequency (Hz) 5k 10k 20k 40 100 500 1k Frequency (Hz) Continued on the following page. 12 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Freq. Response (Sine Wave 1Vrms, 10cm) PKM22EPPH4005-B0 PKM22EPPH4007-B0 100 110 Input Voltage : 1.00 Vrms Sine Distance : 10cm Input Voltage : 1.00 Vrms Sine Distance : 10cm 100 Sound Pressure Level (dB) Sound Pressure Level (dB) 90 80 70 60 50 40 100 90 2 80 70 60 500 1k Frequency (Hz) 5k 10k 20k 50 100 500 1k Frequency (Hz) 5k 10k 20k PKM22EPTH2001-B0 100 Input Voltage : 1.00 Vrms Sine Distance : 10cm Sound Pressure Level (dB) 90 80 70 60 50 40 100 500 1k Frequency (Hz) 5k 10k 20k 13 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Sound Components Piezoelectric Sounders External Drive Pin Type Taping Taking advantage of extensive automatic insertion design technology and materials experience, Murata has developed standard taping type piezoelectric sounder. This Murata technology supports labor and cost saving activities. 0.9 6.9 22.0 5.0 2-0.5 2-1.0 1. High and stable mountability 2. Ammo packaging 3. Minimum quantity (order in sets only): 500 pcs. 2-2.5 7.5 Features (In : mm) Tol. : 0.5 Part Number Sound Pressure Level (dB) Sound Pressure Level (Ref. only) (dB) Operating Voltage Range Capacitance (nF) Operating Temp. Range (C) Storage Temp. Range (C) PKM13EPYH4000-A0 70 min. [3Vp-p,4kHz,square wave,10cm] 70 min. [1Vrms,4kHz,sine wave,10cm] 30 Vp-p max. 5.5 30% [1kHz] -20 to +70 -30 to +80 Freq. Response (Square Wave 3Vp-p, 10cm) Freq. Response (Sine Wave 1Vrms, 10cm) 100 100 Input Voltage : 3.00 Vp-p Square Distance : 10cm Input Voltage : 1.00 Vrms Sine Distance : 10cm 90 90 Sound Pressure Level (dB) Sound Pressure Level (dB) 3 12.6 80 70 60 70 60 50 50 40 100 80 500 1k Frequency (Hz) 5k 10k 20k 40 100 500 1k Frequency (Hz) 5k 10k 20k Continued on the following page. 14 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Taping Dimension dh dh P2 P dS W1 W L1 W0 H0 d1 H1 W2 A D P1 3 F P0 Item t D0 Code Nominal Value Tol. D o12.6 0.5 Height of component A 6.9 0.5 Dimensions of terminal d1 o0.5 0.1 Lead length under the hold down tape L1 8.0 min. Pitch of component P 25.4 0.5 Pitch of sprocket P0 12.7 0.2 Length from hole center to lead P1 3.85 0.7 Length from hole center to component center P2 6.35 0.7 Lead spacing F 5.0 0.5 Slant forward or backward dh 0 1.0 Width of carrier tape W 18.0 0.5 Width of hold down tape W0 12.5 min. Position of sprocket hole W1 9.0 Gap of hold down tape and carrier tape W2 2.0 max. Distance between the center of sprocket hole and lead stopper H0 18.0 Total height of component H1 26.0 max. Diameter of sprocket hole D0 o4.0 0.2 0.6 0.2 0 1.0 Width of diameter Total thickness of tape Body tilt t dS Remarks -- -- Tolerance for Pitches 10ZP0=1272mm 360 : 1mm max. Hold down tape does not exceed the carrier tape. 0.5 -- 0.5 -- (in mm) 15 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Sound Components Piezoelectric Sounders External Drive Lead Wire Type 16.8 +0 7.0 -0.3 31 705 Now microcomputers are widely used for microwave ovens, air conditioners, cars, toys, timers, and other alarm equipment. Externally driven piezoelectric sounders are used in digital watches, electronic calculators, telephones and other equipment. They are driven by a signal (ex.: 2048Hz or 4096Hz) from an LSI and provide melodious sound. Features PKM17EWH2001 1. Low power consumption 2. No contacts therefore, no noise and highly reliable Applications 16.80.2 +0 4.0 -0.3 52 10010 1. Telephone ringers 2. Various office equipment such as PPCs, printers and keyboards 3. Various home appliances such as microwave ovens 4. Confirmation sound of various audio equipment PKM17EWH4000 (In : mm) Sound Pressure Level (dB) Sound Pressure Level (Ref. only) (dB) Operating Voltage Range Capacitance (nF) Operating Temp. Range (C) Storage Temp. Range (C) PKM17EWH2001 72 min. [3Vp-p,2kHz,square wave,10cm] 70 min. [1Vrms,2kHz,sine wave,10cm] 7 Vp-p max. 40 30% [120Hz] -20 to +70 -30 to +80 PKM17EWH4000 75 min. [3Vp-p,4kHz,square wave,10cm] 70 min. [1Vrms,4kHz,sine wave,10cm] 25 Vp-p max. 9.5 30% [1kHz] -20 to +70 -30 to +80 Part Number Freq. Response (Square Wave 3Vp-p, 10cm) PKM17EWH2001 PKM17EWH4000 100 100 Input Voltage : 3.00 Vp-p Square Distance : 10 cm Input Voltage : 3.00 Vp-p Square Distance : 10cm 90 Sound Pressure Level (dB) 90 Sound Pressure Level (dB) 4 (In : mm) Tol. : 0.5 80 70 60 50 40 100 80 70 60 50 500 1k Frequency (Hz) 5k 10k 20k 40 100 500 1k Frequency (Hz) 5k 10k 20k Continued on the following page. 16 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Freq. Response (Sine Wave 1Vrms, 10cm) PKM17EWH2001 PKM17EWH4000 100 IInput Voltage : 1.00 Vrms Sine Distance : 10 cm Input Voltage : 1.00 Vrms Sine Distance : 10cm 90 Sound Pressure Level (dB) Sound Pressure Level (dB) 90 100 80 70 60 50 40 100 80 70 60 50 500 1k Frequency (Hz) 5k 10k 20k 40 100 500 1k Frequency (Hz) 5k 10k 20k 4 17 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Sound Components (0.9) 3.0 max. Piezoelectric Sounders External Drive SMD Type Taking advantage of extensive acoustic and mechanical design technology and high performance ceramics, Murata has developed SMD piezoelectric sounders that suit the thin, high-density design of electronic equipment. (1.9) Sound Emitting Hole 12.0 (0.7) 4.0 12.0 1.2 Features (6.4) 10.0 (2.1) 1. High S.P.L. and clear sound 2. Reflowable 3. Tape & Reel supply 4. Minimum quantity (order in sets only): 1,000 pcs. ( ) : Ref. only (in mm) Tol. 0.2 Part Number Sound Pressure Level (dB) Max. of Operating Voltage Range (Vp-p) Operating Temp. Range (C) Storage Temp. Range (C) Use PKLCS1212E4001-R1 75 min.[3Vp-p,4kHz,square wave,10cm] 25 max. -20 to +70 -30 to +80 For consumer electronics PKLCS1212E40A1-R1 75 min.[3Vp-p,4kHz,square wave,10cm] 25 max. -40 to +85 -40 to +85 For automotive electronics Standard Land Pattern Dimensions Freq. Response (Square Wave 3Vp-p, 10cm) 5 100 Sound Pressure Level (dB) 90 12.4 4.0 10.0 Input Voltage : 3.00Vp-p Square Distance : 10cm 80 70 60 50 40 1.0 (in mm) 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency (kHz) Continued on the following page. 18 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Taping Dimension Direction of Feed (o80) Cover Film 240-280 Empty 400-560 Leader 25.50.5 33.5 max. 16.00.1 Components 2.20.2 (o330) 11.50.1 Trailer 160-200 12.50.1 +0.1 o1.50 -0.0 2.00.1 24.00.2 4.00.1 Dimensions of Reel 1.750.1 Dimensions of Carrier Tape 13.00.2 3.10.1 The cover film peel strength force 0.1-0.7N The cover film peel speed 300mm/min. Cover Film 12.50.1 10 (in mm) 5 19 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Sounders (External Drive) Circuit/Notice Circuit The following are examples of externally driven circuits. (1) Unstable multi-vibrator using Tr. (2) Circuits using inverters or NAND gates. (1) (2) +V 1M 510 20k 20k 510 120k 0.01F 0.01F +V 0.001F 1k 1k 1k 1k Input Notice (Soldering and Mounting) Washing of the component is not acceptable, because it is not sealed. Notice (Handling) 5 1. The component may be damaged if mechanical stress exceeding specifications is applied. 2. Take care to protect operating circuit from surge voltage resulting from excessive force, falling, shock or temperature change. 3. If DC voltage is applied to the component, silver migration may occur. Please pay full attention to avoid subjecting the component to DC voltage for long periods. 4. The resistor should be used as shown in Fig. A. A suitable resistance value should be chosen, preferably 1k to 2k. Instead of this measure, a diode may also be applied as shown in Fig. B. R IC IC Fig. A 5. Avoid excessive pulling of lead wire because wire may break or soldering point may come off. 20 Fig. B P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Sound Components Piezoelectric Ringers (PIEZORINGERr) As the result of rapid development of ICs in telephones, demand for piezoelectric sounders as telephone ringers has also rapidly increased. To effectively satisfy this rising demand, Murata provides a suitable piezoelectric sounder called "PIEZORINGER" with the following features. R18.5 9.0 6.0 120 1.0 7.5 33 +0 -0.4 0.4 Features Part Number PKM33EPH1201C PKM33EPH1202C PKM33EPH1201C 5.0 0 46.0 40.0 2.8 2.8 10010 52 3.3 34.5 9.0 3.0 PKM34EWH1101C/1201C (In : mm) Tol. : 0.5 6 61.0 52.0 10010 44.0 2-3.5 14.0 PKM44EWH1001C 4.0 52 1. Extremely clear sound 2. Since it is voltage driven, the power consumption is quite negligible. 3. It can be driven directly from ICs. 4. Extremely thin and light (In : mm) Tol. : 0.5 (In : mm) Tol. : 0.5 21 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Pin Type Sound Pressure Level (dB) Sound Pressure Level (Ref. only) (dB) Operating Voltage Range Capacitance (nF) Operating Temp. Range (C) Storage Temp. Range (C) 68 min. [30Vp-p,1.2kHz,square wave,1m] 65 min. [1Vrms,1.2kHz,sine wave,10cm] 40 Vp-p max. 40 30% [120Hz] -20 to +70 -30 to +80 Sound Pressure Level (dB) Sound Pressure Level (Ref. only) (dB) Operating Voltage Range Capacitance (nF) Operating Temp. Range (C) Storage Temp. Range (C) PKM34EWH1101C 70 min. [30Vp-p,1.1kHz,square wave,1m] 60 min. [1Vrms,1.1kHz,sine wave,10cm] 40 Vp-p max. 40 30% [120Hz] -20 to +70 -30 to +80 PKM34EWH1201C 70 min. [30Vp-p,1.2kHz,square wave,1m] 60 min. [1Vrms,1.2kHz,sine wave,10cm] 60 Vp-p max. 32 30% [120Hz] -20 to +70 -30 to +80 PKM44EWH1001C 75 min. [30Vp-p,1kHz,square wave,1m] 70 min. [1Vrms,1kHz,sine wave,10cm] 30 Vp-p max. 68 30% [120Hz] -20 to +70 -30 to +80 Part Number PKM33EPH1201C Lead Wire Type Part Number Freq. Response (Square Wave 30Vp-p, 1m) PKM33EPH1201C PKM34EWH1101C 100 100 Input Voltage : 30Vp-p Square Distance : 1m Input Voltage : 30 Vp-p Square Distance : 1m 90 Sound Pressure Level (dB) Sound Pressure Level (dB) 90 80 70 60 40 100 70 60 50 50 6 80 500 1k Frequency (Hz) 5k 10k 40 20k 100 1k 5k 10k 20k 5k 10k 20k Frequency (Hz) PKM34EWH1201C PKM44EWH1001C 100 100 Input Voltage : 30 Vp-p Square Distance : 1m 90 90 Sound Pressure Level (dB) Sound Pressure Level (dB) 500 80 70 60 Input Voltage : 30Vp-p Square Distance : 1m 80 70 60 50 50 40 40 100 22 500 1k Frequency (Hz) 5k 10k 20k 100 500 1k Frequency (Hz) P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Freq. Response (Sine Wave 1Vrms, 10cm) PKM33EPH1201C PKM34EWH1101C 100 100 Input Voltage : 1Vrms Sine Distance : 10cm Input Voltage : 1.00 Vrms Sine Distance : 10cm 90 Sound Pressure Level (dB) Sound Pressure Level (dB) 90 80 70 60 70 60 50 50 40 100 80 40 500 1k Frequency (Hz) 5k 10k 20k 100 PKM34EWH1201C 5k 10k 20k 5k 10k 20k PKM44EWH1001C 100 Input Voltage : 1.00 Vrms Sine Distance : 10cm 90 90 Sound Pressure Level (dB) Sound Pressure Level (dB) 1k Frequency (Hz) 100 80 70 60 Input Voltage : 1Vrms Sine Distance : 10cm 80 70 60 50 50 40 100 500 500 1k Frequency (Hz) 5k 10k 20k 40 100 500 1k Frequency (Hz) 6 23 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Ringers (PIEZORINGERr) Notice Notice (Soldering and Mounting) Washing of the component is not acceptable, because it is not sealed. Notice (Handling) 1. The component may be damaged if mechanical stress exceeding specifications is applied. 2. Take care to protect operating circuit from surge voltage resulting from excessive force, falling, shock or temperature change. 3. If DC voltage is applied to the component, silver migration may occur. Please pay full attention to avoid subjecting the component to DC voltage for long periods. 4. The resistor should be used as shown in Fig. A. A suitable resistance value should be chosen, preferably 1k to 2k. Instead of this measure, a diode may also be applied as shown in Fig. B. R IC IC Fig. A 5. Avoid excessive pulling of lead wire because wire may break or soldering point may come off. 6 24 Fig. B P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Sound Components Piezoelectric Sounders Self Drive Pin Type Hole pattern 10.9 12.3 18 4 R12.9 0 13 130 F Applications G M R1 4. 2 18 7.0 G M 11.3 Piezoelectric sounder self drive type requires only simple circuit and DC power supply. Since this type uses resonant system, it is also available for alarms which need large sound volume. 5 8.5 F 3-1.2 24.0 11.0 8.3 1. Gas alarms, burglar alarms, smoke detectors 2. Air conditioners, microwave ovens, washing machines and other home-electronic appliances controlled by microcomputers 3. Bicycles, toys, game machines (In : mm) Tol. : 0.5 3.5 PKM24SPH3805 Part Number PKM24SPH3805 PKM24SPH3810 PKM24SPH3807 PKM24SPH3801 4.0 8.0 12.0 14.0 4.0 0.7 10.0 23.0 33.25 R15.25 1.0 0.50.15 5.0 17.5 25.0 0.250.15 30.5 5.2 PKM30SPTH2001/2501-B0 7.7 (In : mm) Tol. : 0.5 Sound Pressure Level (dB) Oscillating Frequency (kHz) Current Consumption (mA) Operating Voltage Range Operating Temp. Range (C) Storage Temp. Range (C) PKM24SPH3805 90 min. [12Vdc,10cm] 3.8 0.4kHz [12Vdc] 12 max. [12Vdc] 3.0Vdc to 20.0 Vdc -20 to +70 -30 to +80 PKM30SPTH2001-B0 75 min. [12Vdc,10cm] 2.0 0.3kHz [12Vdc] 20 max. [12Vdc] 3.0Vdc to 20.0 Vdc -20 to +70 -30 to +80 PKM30SPTH2501-B0 75 min. [12Vdc,10cm] 2.5 0.3kHz [12Vdc] 20 max. [12Vdc] 3.0Vdc to 20.0 Vdc -20 to +70 -30 to +80 Part Number 7 Standard Circuit Examples PKM24SPH3805 PKM30SPTH2001/2501-B0 Vdc Vdc 620 150k 330 100k M M 3.9k G Tr. F F 12k G Tr. GND GND Tr: 2SC1815Y or equivalent Tr: 2SC1815Y or equivalent 25 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P37E19.pdf 04.8.27 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Sounders (Self Drive) Notice Notice (Soldering and Mounting) 1. Washing of the component is not acceptable, because it is not sealed. 2. Please do not cover the hole with tape or other obstacle as this will produce irregular oscillation. 3. There should not be any obstacle within 15mm from top of the component as this will produce irregular oscillation. Notice (Handling) 1. The component may be damaged if mechanical stress exceeding specifications is applied. 2. Take care to protect operating circuit from surge voltage resulting from excessive force, falling, shock or temperature change. 3. If DC voltage is applied to the component, silver migration may occur. Please pay full attention to 7 26 avoid subjecting the component to DC voltage for long periods. 4. The standard self-driven circuits utilizes transistor switching. The circuit constants for hfe of the transistor are optimally chosen to maintain stable oscillation. So please follow it when you design a circuit. P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Sound Components Piezoelectric Buzzers R1.0 9.70.3 0.70.3 24.30.3 4.51 This is a unified piezoelectric sounder which has a piezoelectric diaphragm of 3 terminals connected to a self drive circuit, and it easily generates sound with only a DC power supply (DC3.0-20V). Using suitably designed resonant system, this type can be used where large sound volumes are needed. 15.0 Applications PKB24SPCH3601-B0 (In : mm) Tol. : 0.5 0.70.1 15.00.5 17.70.3 4.51.0 30.30.3 R1.0 0.640.1 - + PKB30SPCH2001/3001-B0 (In : mm) 34.0 29.0 24.0 2.2 2.2 PKB24SWH3301 9.5 2.0 Red (+) 10010 2.7 Black (-) 52 1. Gas alarms, burglar alarms 2. Air conditioners, microwave ovens and various types of microcomputer controlled home-electronic appliances 3. Automobile speed alarms, navigators, car stereos and other automobile equipment 4. Toys, games, and other simple electronic devices such as teaching aids 0.60.1 (In : mm) Tol. : 0.5 8 27 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Pin Type Part Number Sound Pressure Level (dB) Oscillating Frequency (kHz) Current Consumption (mA) Operating Voltage Range Operating Temp. Range (C) Storage Temp. Range (C) PKB24SPCH3601-B0 90 min. [12Vdc,10cm] 3.6 0.5kHz [12Vdc] 16 max. [12Vdc] 3.0Vdc to 15.0 Vdc -20 to +70 -30 to +80 PKB30SPCH2001-B0 92 min. [12Vdc,10cm] 2.0 0.4kHz [12Vdc] 15 max. [12Vdc] 3.0Vdc to 15.0 Vdc -20 to +70 -30 to +80 PKB30SPCH3001-B0 92 min. [12Vdc,10cm] 2.7 0.4kHz [12Vdc] 15 max. [12Vdc] 3.0Vdc to 15.0 Vdc -20 to +70 -30 to +80 Sound Pressure Level (dB) Oscillating Frequency (kHz) Current Consumption (mA) Operating Voltage Range Operating Temp. Range (C) Storage Temp. Range (C) 80 min. [12Vdc,10cm] 3.3 0.5kHz [12Vdc] 12 max. [12Vdc] 3.0Vdc to 20.0 Vdc -20 to +70 -30 to +80 Lead Wire Type Part Number PKB24SWH3301 Voltage-Sound Pressure Level/Voltage-Consumption Current PKB24SPCH3601-B0 PKB30SPCH2001-B0 Sound Pressure Level 20 15 90 10 Consumption Current 100 Sound Pressure Level 32 24 90 16 Consumption Current 5 80 0 8 0 5 10 Input Voltage (Vdc) 15 80 0 20 0 5 PKB30SPCH3001-B0 100 20 Sound Pressure Level 15 90 10 Consumption Current 0 80 5 10 Input Voltage (Vdc) 15 Sound Pressure Level (dB) 25 Consumption Current (mA) Sound Pressure Level (dB) 20 25 100 5 28 15 Input Voltage (Vdc) PKB24SW-3301 110 8 10 25 90 20 15 Sound Pressure Level 80 10 Consumption Current 5 70 0 0 5 10 15 Input Voltage (Vdc) 20 25 Consumption Current (mA) 100 40 Consumption Current (mA) 25 Sound Pressure Level (dB) 110 Consumption Current (mA) Sound Pressure Level (dB) 110 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P37E19.pdf 04.8.27 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Buzzers Notice Notice (Soldering and Mounting) 1. Washing of the component is not acceptable, because it is not sealed. 2. Please do not cover the hole with tape or other obstacle as this will produce irregular oscillation. 3. There should not be any obstacle within 15mm from top of the component as this will produce irregular oscillation. Notice (Handling) 1. The component may be damaged if mechanical stress over this specification is applied. 2. Resistors should not be connected in series to the power supply as this will produce irregular oscillation. When resistor is necessary to control sound volume, use capacitor (1F) parallel with the buzzer together. +Vdc 3. Please pay enough attention not to pull lead wire too much because wire may be broken or soldering point may come off. Buzzer Capacitor (1F) 8 29 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Sound Components 2.0 max. Piezoelectric Receiver (CERAMIPHONEr) 12.0 3.00.3 (0.7) 3.00.3 12.0 Features 10.0 PKLCD1212R1000-R1 (1.8) (5.0) 1. Thin shape, lightweight 2. Low current consumption and good matching impedance for a voltage drive 3. Reflowable 4. Tape & Reel supply 5. Minimum quantity (order in sets only): 1,500 pcs. Part Number 1.1 4.0 Taking advantage of extensive acoustic, mechanical designing technology and high performance ceramics, Murata has developed the SMD piezoelectric receiver. This Murata technology supports labor and cost saving activities. ( ) : Ref. only (in mm) Tol. 0.2 Sound Pressure Level (1) (dB) Sound Pressure Level (2) (dB) Operating Voltage Range (Vp-p) Operating Temperature Range (C) Storage Temperature Range (C) 106.0 +4.0/-2.5 [at 300Hz] 114.0 +2.5/-4.0 [at 1kHz] 7 max. -20 to +70 -30 to +80 Standard Land Pattern Dimensions Freq. Response (Sine Wave 1Vrms) 120 Sound Pressure Level (dB) 110 12.4 4.0 10.0 100 90 80 70 60 100 (in mm) Input Voltage: 1Vrms , Sine wave 500 1k 5k 10k Frequency (Hz) Continued on the following page. 9 30 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Taping Dimension (o80) (o330) 11.50.1 Trailer 160-200 12.50.1 +0.1 o1.50 -0.0 2.00.1 24.00.2 4.00.1 Dimensions of Reel 1.750.1 Dimensions of Carrier Tape 25.50.5 33.5 max. 16.00.1 Direction of Feed 2.10.1 2.20.2 Components Cover Film 240-280 Empty 400-560 Leader 13.00.2 The cover film peel strength force 0.1-0.7N The cover film peel speed 300mm/min. Cover Film 12.50.1 10 (in mm) 9 31 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please P37E19.pdf 04.8.27 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Receiver Circuit/Notice Circuit 12.4mm 100 9.0mm o1.0mm 9.0mm Receiver Ear Piece 12.4mm 1Vrms, Sine Wave Coupler (IEC-318) microphone 3.2mm 0.5mm 30.0mm 2.0mm Amp. Notice (Soldering and Mounting) Washing of the component is not acceptable, because it is not sealed. Notice (Handling) 1. The component may be damaged if mechanical stress exceeding specifications is applied. 2. Take care to protect operating circuit from surge voltage resulting from excessive force, falling, shock or temperature change. 3. If DC voltage is applied to the component, silver migration may occur. Please pay full attention to avoid subjecting the component to DC voltage for 9 32 long periods. 4. Please pay attention to the hand set design. Sound pressure level - frequency characteristics are affected by the hand set design. (Blocking the sound emitting hole or air dumping hole may degrade S.P.L.-frequency characteristics. Placing other components or obstacles close to the holes may also affect the characteristics.) P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Sound Components Piezoelectric Speakers (CERAMITONEr) Resinous ring As voice synthesizing techniques with ICs and LSIs are rapidly progressing, human voice synthesizing devices are put into practical use for portable calculators, clocks, vending machines, translating machines and so forth. In order to meet the demand, Murata has developed Piezoelectric Speakers best suited for making synthesized voices or melodies. Ceramic Supporting ring Metal plate 1.70.15 (19.7) 27.0 35.00.3 Features VSB35EWH0701B (in mm) Tol. : 0.5 ( ) : Ref. only 1. High efficiency compared with conventional electromagnetic type speakers 2. Ultra-thin and lightweight 3. High impedance with less power consumption 4. No electric noise, because they have no mechanical contacts. 5. Direct drive by IC is available. Resinous ring Ceramic Supporting ring Metal plate (25.0) 2.5 39.0 50.00.3 VSB50EWH0301B Oscillating Resonant Frequency Impedance Frequency Range (Hz) [Lowest] (ohm) Part Number Capacitance (nF) (in mm) Tol. : 0.5 ( ) : Ref. only Maximum Input (mW) Operating Temp. Range (C) Storage Temp. Range (C) VSB35EWH0701B 600Hz to 20kHz 950 150Hz 600[1kHz] 340 35%[120Hz] 75 -20 to +70 -30 to +80 VSB50EWH0301B 250Hz to 20kHz 400 150Hz 300[1kHz] 600 35%[120Hz] 150 -20 to +70 -30 to +80 Freq. Response (Sine Wave 1Vrms, 10cm) VSB35EWH0701B VSB50EWH0301B 100 100 Input Voltage : 1.00 Vrms Sine Distance : 10cm Input Voltage : 1.00 Vrms Sine Distance : 10cm 90 Sound Pressure Level (dB) Sound Pressure Level (dB) 90 80 70 60 50 40 100 80 70 60 50 500 1k Frequency (Hz) 5k 10k 20k 40 100 500 1k Frequency (Hz) 5k 10k 20k Continued on the following page. 10 33 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Impedance-Frequency Characteristics 5k 5k 1k 500 34 1k 500 100 100 50 50 100 10 VSB50EWH0301B 10k Impedance [ohm] Impedance [ohm] VSB35EWH0701B 10k 500 1k Frequency [Hz] 5k 10k 100 500 1k Frequency [Hz] 5k 10k P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Piezoelectric Speakers (CERAMITONEr) Notice Notice (Soldering and Mounting) 1. Applying load on the center area of the speaker may cause cracking in the ceramic element. When the speaker is supported by the edge, the load should be only applied around the edge. 2. Washing of the component is not acceptable, because it is not sealed. Notice (Handling) 1. Please do not touch the component with bare hand because electrode may be corroded. 2. The component may be damaged if mechanical stress exceeding specifications is applied. 3. Take care to protect operating circuit from surge voltage resulting from excessive force, falling, shock or temperature change. 4. If DC voltage is applied to the component, silver migration may occur. Please pay full attention to avoid subjecting the component to DC voltage for long periods. 5. The resistor should be used as shown in Fig. A. A suitable resistance value should be chosen, preferably 1k to 2k. Instead of this measure, a diode may also be applied as shown in Fig. B. R IC IC Fig. A Fig. B 6. Avoid excessive pulling of lead wire because wire may break or soldering point may come off. 10 35 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Package Package Minimum Quantity (pcs.) Product Names Part Number Minimum Quantity O330mm Reel Bulk (Box) Ammo Pack Magazine o Piezoelectric Diaphragms* External - Drive Types Self - Drive Types 7BB-12-9 5120 7BB-15-6 8000 7BB-20-3 3000 7BB-20-6 1800 7BB-20-6L0 600 7BB-27-4 1500 7BB-27-4L0 600 7BB-35-3 800 7BB-35-3L0 400 7BB-41-2 400 7BB-41-2L0 250 7NB-31R2-1 3000 7BB-20-6C 1800 7BB-20-6CL0 600 7BB-27-4C 1500 7BB-27-4CL0 600 7BB-35-3C 800 7BB-35-3CL0 400 7BB-41-2C 600 7BB-41-2CL0 250 7SB-34R7-3C 1600 o Piezoelectric Sounders* External - Drive Types PKM13EPYH4000-A0 500 PKM13EPYH4002-B0 330 PKM17EPP-2002-B0 200 PKM17EPPH4001-B0 200 PKM17EPPH4002-B0 200 PKM17EWH2001 250 PKM22EPH2001 360 PKM22EPH2002 270 PKM22EPH2003 270 PKM22EPPH2001-B0 750 PKM22EPPH2002-B0 750 PKM22EPPH4001-B0 900 PKM22EPPH4002-B0 900 PKM22EPPH4005-B0 750 PKM22EPPH4007-B0 750 PKM22EPPH4012-B0 750 PKM22EPTH2001-B0 300 PKM17EWH4000 1) 75 1) 500 PKLCS1212E4001-R1 1000 PKLCS1212E40A1-R1 1000 The last two digits are changed to M0. Continued on the following page. 10 "Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity". (As for products series with mark, bulk (bag) quantities shown here differ from actual delivery quantities in a package. ) Please contact nearest sales office for details and for any other products not listed above. * 36 37 P37E19.pdf 04.8.27 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Package Package Continued from the preceding page. Product Names Self - Drive Types o Piezoelectric Buzzers* o Piezoelectric Ringers (PIEZORINGERr)* Part Number Minimum Quantity O330mm Reel PKM24SPH3801 270 PKM24SPH3805 360 PKM24SPH3807 270 PKM24SPH3810 270 PKM30SPTH2001-B0 70 PKM30SPTH2501-B0 70 PKB24SPCH3601-B0 650 PKB24SWH3301 200 PKB30SPCH2001-B0 80 PKB30SPCH3001-B0 80 PKM33EPH1201C 300 PKM33EPH1202C 60 PKM34EWH1101C 25 PKM34EWH1201C 25 PKM44EWH1001C o Piezoelectric Receiver (CERAMIPHONEr) PKLCD1212R1000-R1 o Piezoelectric Speakers (CERAMITONEr)* Bulk (Box) Ammo Pack Magazine 25 1500 VSB35EWH0701B 160 VSB50EWH0301B 80 10 38 37 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. P37E19.pdf 04.8.27 Note: 1. Export Control For customers outside Japan Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of July 2004. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. http://www.murata.com/ Head Office 2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 As of October 12, 2004, Murata's contact information will be changed as follows 1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp