Relay Sockets 5 Energy Way, P.O. Box 1019, West Warwick, RI 02893 USA Tel. 800-424-9850/401-823-5200 * Fax 401-823-8723 * Email info@advintcorp.com * Internet http://www.advintcorp.com Relay Sockets Features: Relay Footprint #RFXXX * Peel-A-Way delivery system. * Complete soldering visibility on both sides of PCB. * Maximum air flow. Better flux rinse. * Multiple terminal types available on a single sheet. * No special assembly equipment required. * Thru hole design available for board to board applications. * RTV sealant, tape seal and solder preform options available. Relay Footprint #T75 Relay Footprint #T92 (R) .185 (4.70) .350 (8.89) .748 (19.00) .100 (2.54) .600 (15.24) Plating: 1.000 (25.40) .203 (5.16) Typ. Series 107, 171, 172, 173 & 174 DIP Reed Relays Relay Footprint #T84 Relay Footprint # T85 & T82N Relay Footprint #T74 .100 (2.54) .400 (10.16) .200 (5.08) .500 (12.70) .300 (7.62) .300 (7.62) .300 (7.62) .200 (5.08) .300 (7.62) .100 (2.54) .100 (2.54) .200 (5.08) How To Order R T075 -XXX T G .100 (2.54) Contact Plating G - Gold T - Tin-Lead Footprint # .300 (7.62) Terminal Type See Below Body Material: .400 (10.16) Polyimide Film - Temp. range -269C to 400C (-452F to 752F) .100 (2.54) .300 (7.62) .600 (15.24) Relay Footprint #T81 Terminal: Gold over Nickel or Tin-Lead over Nickel Contact: Gold over Nickel or Tin-Lead over Nickel .630 (16.00) .126 (3.20) Terminals and Contacts: Terminal: Brass - Copper Alloy (C36000) ASTM-B-16 Contact: Beryllium Copper - Copper Alloy (C17200), ASTM-B-194 .300 (7.62) Terminal Plating G - Gold T - Tin-Lead Terminal Information Type -301 Type -102 Type -106 Type -144 Type -107 Accepts .022" - .032" Dia. Leads Accepts .022" - .032" Dia. Leads Accepts .032" - .047" Dia. Leads Accepts .032" - .047" Dia. Leads Accepts .032" - .047" Dia. Leads .090 Dia. (2.29) .090 Dia. (2.29) .070 Dia. (1.79) .093 Dia. (2.36) .015 (.38) .031 (.79) .178 (4.52) .055 Dia. (1.40) Part #3818 Contact Group D Standard Pitch .100" (2.54) Part #1721 Contact Group D Standard Pitch .150" (3.91) .236 (5.99) .073 Dia. (1.85) .073 Dia. (1.85) .068 Dia. (1.73) .036 (.91) .031 (.79) .280 (7.11) .023 (.58) .206 (5.23) .250 (6.35) .092 Dia. (2.37) Part #1718 Contact Group E Standard Pitch .150" (3.91) .085 Dia. (2.16) Part #1806 Contact Group E Standard Pitch .150" (3.91) Part #1726 Contact Group E Standard Pitch .150" (3.91) Type -327 Type -302 Type -104 Type -105 Type -323 Accepts .035" - .045" Dia. Leads Accepts .040" - .060" Dia. Leads Accepts .065" - .082" Dia. Leads Accepts .065" - .082" Dia. Leads Accepts .065" - .082" Leads .118 Dia. (3.00) .125 Dia. (3.18) Part #3971 Contact Group E1 Standard Pitch .150" (3.91) .182 Dia. (4.62) .188 Dia. (4.78) .015 (.38) .031 (.79) .345 (8.76) .085 Dia. (2.16) .100 (2.54) .088 Dia. (2.24) .142 Dia. (3.61) Part #3819 Contact Group E2 Standard Pitch .150" (3.91) .032 (.81) .412 (10.46) .288 (7.31) Part #1723 Contact Group F Standard Pitch .250" (6.45) .188 Dia. (4.78) .031 (.79) .307 (7.80) .156 Dia. (3.96) Part #1724 Contact Group F Standard Pitch .250" (6.45) .345 (8.75) .142 Dia. (3.61) Part #3967 Contact Group F Standard Pitch .250" (6.45) Peel-A-Way(R) covered by patent rights issued and/or pending. inch/(mm) Products shown covered by patents issued and/or pending. Specifications subject to change without notice. Page 76