9012GDW21 Product data sheet Characteristics pressure switch 9012G - fixed scale - 1 threshold - 0.2 to 10 psig Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 411.00 USD Commercial status Discontinued on:23 January 2021 End-of-service on:24 January 2021 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications 9012GDW21has not been replaced. Pleasecontact your customer care centerfor more information. Discontinued Main Range of product 9012G Pressure sensor type Electromechanical pressure switch Pressure sensor name 9012G Pressure sensor size 10psi (68.95kPa) Maximum pressure 100 psi Contacts type and composition 2(NC-NO), DPDT-DB, Form ZZ, snap action, silver nickel contacts Controlled fluid Hydraulic oil -40...250F (-40...121C)) Non-corrosive liquids Air Non-corrosive gas Fluid connection type 0.25 inch 18 NPTF UL 508 Pressure switch type of operation Detection of 1 single threshold Scale type Fixed Local display Without Complementary Range on decreasing pressure 0.2...10psi (1.38...68.95kPa) Approx fix differential at mid range 0.6psi (4.14kPa) +/- 2.5 % full scale Cable entry 0.5 inch NPT conduit entrance Terminal block type 8 screw terminals Electrical connection Screw-clamp terminals, AWG 22...AWG 12 Electrical circuit type Control circuit Local signalling Without Line Rated Current 3A 240 V AC A600 NEMA rating designation 6A 120 V AC A600 NEMA rating designation 0.22A 125 V DC R300 NEMA rating designation 0.11A 250 V DC R300 NEMA rating designation *Price is "List Price" and may be subject to a trade discount - check with your local distributor or retailer for actual price. Apr 16, 2021 1 Setting Internal Enclosure material Die cast aluminium alloy 380 Pressure actuator Diaphragm nitrile (Buna-N) Height 6.24in (158.50mm) Depth 4.56in (115.82mm) Width 5.05in (128.27mm) Operating position Any position Materials in contact with fluid Nitrile (Buna-N) Zinc plated steel Short-circuit protection 10A cartridge overload and short-circuit protection gL Maximum operating rate 120cyc/mn Mechanical durability 5000000cycles Repeat accuracy 4% Net weight 3lb(US) (1.36kg) Environment Vibration resistance 2 gn 40...150Hz)IEC 68-2-6 Shock resistance 50 gn IEC 58-2-27 Standards UL 508 CE CSA C22.2 No 14 Product certifications UL listed file E12158 CCN NKPZ and CCN NTHT CSA LR25490 class 3211 03 CE NEMA degree of protection NEMA 4/4X/13 UL 50 Ambient air temperature for operation -10...185F (-23...85C) Ordering and shipping details Category 21522 - 9012 G INDUSTRIAL PRESSURE SWITCHES Discount Schedule CP7G GTIN 00785901048022 Nbr. of units in pkg. 1 Package weight(Lbs) 3lb(US) (1.36kg) Returnability No Country of origin MX Packing Units Package 1 Height 18.75in (47.613cm) Package 1 width 7.38in (18.745cm) Package 1 Length 47.61in (120.937cm) Offer Sustainability California proposition 65 WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov REACh Regulation REACh Declaration EU RoHS Directive Not applicable, out of EU RoHS legal scope Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information Contractual warranty Warranty 2 18 months