INTEGRATED CIRCUITS DIVISION
www.ixysic.com
DS-LAA120-R09 1
LAA120
Dual Single-Pole, Normally Open
OptoMOS® Relay
e3
Pb
Part # Description
LAA120 8-Pin DIP (50/Tube)
LAA120S 8-Pin Surface Mount (50/Tube)
LAA120STR 8-Pin Surface Mount (1,000/Reel)
LAA120P 8-Pin Flat Pack (50/Tube)
LAA120PTR 8-Pin Flat Pack (1,000/Reel)
Parameter Ratings Units
Blocking Voltage 250 VP
Load Current 170 mArms / mADC
On-Resistance (max) 20
Applications
Features
Description
Approvals
Ordering Information
Switching Characteristics of
Normally Open (Form A) Devices
• 3750Vrms Input/Output Isolation
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Small 8-Pin Package
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Versions Available
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hook Switch
• Dial Pulsing
• Ground Start
• Ringing Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Form-A
IF
ILOAD
10%
90%
ton toff
Pin Configuration
1
2
3
4
8
7
6
5
+ Control - Switch #1
– Control - Switch #1
+ Control - Switch #2
– Control - Switch #2
Load - Switch #1
Load - Switch #1
Load - Switch #2
Load - Switch #2
• UL Certified Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 10 05 49410 006
LAA120 is a dual normally open (1-Form-A) Solid
State Relay that has two independently controlled,
optically coupled MOSFET switches. The MOSFET
switches and photovoltaic die use optically coupled
MOSFET technology to provide 3750Vrms of input to
output isolation.
The optically coupled outputs, which use the patented
OptoMOS architecture, are controlled by a highly
efficient GaAIAs infrared LED.
This dual switch OptoMOS relay provides a more
compact design solution than discrete single-pole
relays in a variety of applications, and saves board
space by incorporating both switches in a single 8-Pin
package.