74LV132 Quad 2-input NAND Schmitt trigger Rev. 05 -- 2 July 2009 Product data sheet 1. General description The 74LV132 is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC132 and 74HCT132. The 74LV132 contains four 2-input NAND gates which accept standard input signals. They are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. The gate switches at different points for positive and negative-going signals. The difference between the positive voltage VT+ and the negative voltage VT- is defined as the input hysteresis voltage VH. 2. Features n n n n n Wide operating voltage: 1.0 V to 5.5 V Optimized for low voltage applications: 1.0 V to 3.6 V Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V Typical output ground bounce < 0.8 V at VCC = 3.3 V and Tamb = 25 C Typical HIGH-level output voltage (VOH) undershoot: > 2 V at VCC = 3.3 V and Tamb = 25 C n ESD protection: u HBM JESD22-A114E exceeds 2000 V u MM JESD22-A115-A exceeds 200 V n Multiple package options n Specified from -40 C to +85 C and from -40 C to +125 C 3. Applications n Wave and pulse shapers for highly noisy environments n Astable multivibrators n Monostable multivibrators 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74LV132N -40 C to +125 C DIP14 plastic dual in-line package; 14 leads (300 mil) SOT27-1 74LV132D -40 C to +125 C SO14 plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 74LV132DB -40 C to +125 C SSOP14 plastic shrink small outline package; 14 leads; body width 5.3 mm SOT337-1 74LV132PW -40 C to +125 C TSSOP14 plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1 74LV132BQ -40 C to +125 C DHVQFN14 plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 14 terminals; body 2.5 x 3 x 0.85 mm SOT762-1 5. Functional diagram 1 1A 1Y 2 3 1B 1 & 3 & 6 & 8 & 11 2 4 2A 2Y 5 9 4 5 9 3A 3Y 10 6 2B 10 8 3B 12 13 12 4A mna408 4Y 13 11 Y 4B B mna407 Fig 1. Logic symbol mna409 Fig 2. IEC logic symbol 74LV132_5 Product data sheet A Fig 3. Logic diagram (one gate) (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 2 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger 6. Pinning information 6.1 Pinning 1 1A terminal 1 index area 2 13 4B 12 4A 1Y 3 2A 4 2B 5 2Y 6 9 3A GND 7 8 3Y 132 11 4Y 10 3B 12 4A 2A 4 2B 5 2Y 6 11 4Y VCC (1) 10 3B 9 8 1B 13 4B 3 3Y 14 VCC 2 1Y 7 1 1B GND 1A 14 VCC 74LV132 3A 001aah099 Transparent top view (1) The die substrate is attached to the exposed die pad using conductive die attach material. It cannot be used as a supply pin or input. 001aac203 Fig 4. Pin configuration DIP14, SO14 and (T)SSOP14 Fig 5. Pin configuration DHVQFN14 6.2 Pin description Table 2. Pin description Symbol Pin Description 1A 1 data input 1B 2 data input 1Y 3 data output 2A 4 data input 2B 5 data input 2Y 6 data output GND 7 ground (0 V) 3Y 8 data output 3A 9 data input 3B 10 data input 4Y 11 data output 4A 12 data input 4B 13 data input VCC 14 supply voltage 74LV132_5 Product data sheet (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 3 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger 7. Functional description Table 3. Function table H = HIGH voltage level; L = LOW voltage level. Input Output nA nB nY L L H L H H H L H H H L 8. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter VCC supply voltage Conditions Min Max Unit -0.5 +7.0 V - 20 mA - 50 mA input clamping current VI < -0.5 V or VI > VCC + 0.5 V [1] IOK output clamping current VO < -0.5 V or VO > VCC + 0.5 V [1] IO output current VO = -0.5 V to (VCC + 0.5 V) - 25 mA ICC supply current - 50 mA IGND ground current -50 - mA Tstg storage temperature -65 +150 C Ptot total power dissipation IIK Tamb = -40 C to +125 C DIP14 package [2] - 750 mW SO14 package [3] - 500 mW (T)SSOP14 package [4] - 500 mW DHVQFN14 package [5] - 500 mW [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] Ptot derates linearly with 12 mW/K above 70 C. [3] Ptot derates linearly with 8 mW/K above 70 C. [4] Ptot derates linearly with 5.5 mW/K above 60 C. [5] Ptot derates linearly with 4.5 mW/K above 60 C. 74LV132_5 Product data sheet (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 4 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger 9. Recommended operating conditions Table 5. Recommended operating conditions Voltages are referenced to GND (ground = 0 V). Symbol Parameter VCC supply Conditions voltage[1] Min Typ Max Unit 1.0 3.3 5.5 V VI input voltage 0 - VCC V VO output voltage 0 - VCC V Tamb ambient temperature -40 +25 +125 C [1] The static characteristics are guaranteed from VCC = 1.2 V to VCC = 5.5 V, but LV devices are guaranteed to function down to VCC = 1.0 V (with input levels GND or VCC). 10. Static characteristics Table 6. Static characteristics Voltages are referenced to GND (ground = 0 V). Symbol Parameter -40 C to +85 C Conditions Min VOH HIGH-level output voltage LOW-level output voltage VOL Typ[1] Max -40 C to +125 C Unit Min Max VI = VT+ or VT- lO = -100 A; VCC = 1.2 V - 1.2 - - - V lO = -100 A; VCC = 2.0 V 1.8 2.0 - 1.8 - V lO = -100 A; VCC = 2.7 V 2.5 2.7 - 2.5 - V lO = -100 A; VCC = 3.0 V 2.8 3.0 - 2.8 - V lO = -100 A; VCC = 4.5 V 4.3 4.5 - 4.3 - V lO = -6 mA; VCC = 3.0 V 2.4 2.82 - 2.2 - V lO = -12 mA; VCC = 4.5 V 3.6 4.2 - 3.5 - V VI = VT+ or VT- IO = 100 A; VCC = 1.2 V - 0 - - - V IO = 100 A; VCC = 2.0 V - 0 0.2 - 0.2 V IO = 100 A; VCC = 2.7 V - 0 0.2 - 0.2 V IO = 100 A; VCC = 3.0 V - 0 0.2 - 0.2 V IO = 100 A; VCC = 4.5 V - 0 0.2 - 0.2 V IO = 6 mA; VCC = 3.0 V - 0.25 0.40 - 0.50 V IO = 12 mA; VCC = 4.5 V - 0.35 0.55 - 0.65 V II input leakage current VI = VCC or GND; VCC = 5.5 V - - 1.0 - 1.0 A ICC supply current VI = VCC or GND; IO = 0 A; VCC = 5.5 V - - 20.0 - 40 A ICC additional supply current per input; VI = VCC - 0.6 V; VCC = 2.7 V to 3.6 V - - 500 - 850 A CI input capacitance - 3.5 - - - pF [1] Typical values are measured at Tamb = 25 C. 74LV132_5 Product data sheet (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 5 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger 11. Dynamic characteristics Table 7. Dynamic characteristics GND = 0 V; For test circuit see Figure 7. Symbol Parameter propagation delay tpd -40 C to +85 C Conditions power dissipation capacitance Unit Min Max Min Max VCC = 1.2 V - 65 - - - ns VCC = 2.0 V - 18 34 - 43 ns 24 - 30 ns [2] nA, nB to nY; see Figure 6 VCC = 2.7 V CPD -40 C to +125 C Typ[1] - 15 VCC = 3.0 V to 3.6 V; CL = 15 pF [3] - 10 - - - ns VCC = 3.0 V to 3.6 V [3] - 12 20 - 25 ns VCC = 4.5 V to 5.5 V [3] - 9.0 14 - 17 ns CL = 50 pF; fi = 1 MHz; VI = GND to VCC [4] - 24 - - - pF [1] All typical values are measured at Tamb = 25 C. [2] tpd is the same as tPLH and tPHL. [3] Typical values are measured at nominal supply voltage (VCC = 3.3 V and VCC = 5.0 V). [4] CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz, fo = output frequency in MHz CL = output load capacitance in pF VCC = supply voltage in V N = number of inputs switching (CL x VCC2 x fo) = sum of the outputs. 12. Waveforms VI VM nA, nB input GND t PHL t PLH VOH VM nY output VOL 001aaa662 Measurement points are given in Table 8. VOL and VOH are typical voltage output levels that occur with the output load. Fig 6. The input (nA, nB) to output (nY) propagation delays 74LV132_5 Product data sheet (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 6 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger Table 8. Measurement points Supply voltage Input Output VCC VM VM < 2.7 V 0.5VCC 0.5VCC 2.7 V to 3.6 V 1.5 V 1.5 V 4.5 V 0.5VCC 0.5VCC VCC PULSE GENERATOR VI VO DUT CL 50 pF RT RL 1 k 001aaa663 Test data is given in Table 9. Definitions test circuit: RT = Termination resistance should be equal to output impedance Zo of the pulse generator. RL = Load resistance. CL = Load capacitance including jig and probe capacitance. Fig 7. Load circuit for switching times Table 9. Test data Supply voltage Input VCC VI tr, tf < 2.7 V VCC 2.5 ns 2.7 V to 3.6 V 2.7 V 2.5 ns 4.5 V VCC 2.5 ns 13. Transfer characteristics Table 10. Transfer characteristics GND = 0 V; For test circuit see Figure 7. Symbol Parameter VT+ positive-going threshold voltage Conditions -40 C to +85 C Unit Min Max Min Max VCC = 1.2 V - 0.70 - - - V VCC = 2.0 V 0.8 1.10 1.4 0.8 1.4 V VCC = 2.7 V 1.0 1.45 2.0 1.0 2.0 V VCC = 3.0 V 1.2 1.60 2.2 1.2 2.2 V VCC = 3.6 V 1.5 1.95 2.4 1.5 2.4 V VCC = 4.5 V 1.7 2.50 3.2 1.7 3.2 V VCC = 5.5 V 2.1 3.00 3.9 2.1 3.9 V see Figure 6 74LV132_5 Product data sheet -40 C to +125 C Typ[1] (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 7 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger Table 10. Transfer characteristics ...continued GND = 0 V; For test circuit see Figure 7. Symbol Parameter VT- negative-going threshold voltage hysteresis voltage VH [1] -40 C to +85 C Conditions Min Typ[1] Max -40 C to +125 C Min Unit Max see Figure 6 VCC = 1.2 V - 0.34 - - - V VCC = 2.0 V 0.3 0.65 0.9 0.3 0.9 V VCC = 2.7 V 0.4 0.90 1.4 0.4 1.4 V VCC = 3.0 V 0.6 1.05 1.5 0.6 1.5 V VCC = 3.6 V 0.8 1.30 1.8 0.8 1.8 V VCC = 4.5 V 0.9 1.60 2.0 0.9 2.0 V VCC = 5.5 V 1.2 2.00 2.6 1.2 2.6 V (VT+ - VT-); see Figure 6 VCC = 1.2 V - 0.3 - - - V VCC = 2.0 V 0.2 0.55 0.8 0.2 0.8 V VCC = 2.7 V 0.3 0.60 1.1 0.3 1.1 V VCC = 3.0 V 0.4 0.65 1.2 0.4 1.2 V VCC = 3.6 V 0.4 0.70 1.2 0.4 1.2 V VCC = 4.5 V 0.4 0.80 1.4 0.4 1.4 V VCC = 5.5 V 0.6 1.00 1.5 0.6 1.5 V All typical values are measured at Tamb = 25 C. 14. Waveforms transfer characteristics VT+ VO VI VH VT- VO VI VH VT- VT+ Fig 8. Transfer characteristic mna208 mna207 VT+ and VT- limits at 70 % and 20 %. Fig 9. 74LV132_5 Product data sheet Definition of VT+, VT- and VH (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 8 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger 001aaa659 12 001aaa660 100 ICC (A) ICC (A) 80 8 60 40 4 20 0 0 0 0.3 0.6 0.9 1.2 0 0.4 VI (V) 0.8 1.2 1.6 2 VI (V) VCC = 1.2 V. VCC = 2.0 V. Fig 10. Typical 74LV132 transfer characteristics Fig 11. Typical 74LV132 transfer characteristics 001aaa661 300 ICC (A) 200 100 0 0 0.6 1.2 1.8 2.4 3 VI (V) VCC = 3.0 V. Fig 12. Typical 74LV132 transfer characteristics 74LV132_5 Product data sheet (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 9 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger 15. Package outline DIP14: plastic dual in-line package; 14 leads (300 mil) SOT27-1 ME seating plane D A2 A A1 L c e Z w M b1 (e 1) b MH 8 14 pin 1 index E 1 7 0 5 10 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 min. A2 max. b b1 c D (1) E (1) e e1 L ME MH w Z (1) max. mm 4.2 0.51 3.2 1.73 1.13 0.53 0.38 0.36 0.23 19.50 18.55 6.48 6.20 2.54 7.62 3.60 3.05 8.25 7.80 10.0 8.3 0.254 2.2 inches 0.17 0.02 0.13 0.068 0.044 0.021 0.015 0.014 0.009 0.77 0.73 0.26 0.24 0.1 0.3 0.14 0.12 0.32 0.31 0.39 0.33 0.01 0.087 Note 1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included. REFERENCES OUTLINE VERSION IEC JEDEC JEITA SOT27-1 050G04 MO-001 SC-501-14 EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-13 Fig 13. Package outline SOT27-1 (DIP14) 74LV132_5 Product data sheet (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 10 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 D E A X c y HE v M A Z 8 14 Q A2 A (A 3) A1 pin 1 index Lp 1 L 7 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) mm 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 8.75 8.55 4.0 3.8 1.27 6.2 5.8 1.05 1.0 0.4 0.7 0.6 0.25 0.25 0.1 0.7 0.3 0.01 0.019 0.0100 0.35 0.014 0.0075 0.34 0.16 0.15 0.010 0.057 inches 0.069 0.004 0.049 0.05 0.244 0.039 0.041 0.228 0.016 0.028 0.024 0.01 0.01 0.028 0.004 0.012 o 8 o 0 Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. REFERENCES OUTLINE VERSION IEC JEDEC SOT108-1 076E06 MS-012 JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 Fig 14. Package outline SOT108-1 (SO14) 74LV132_5 Product data sheet (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 11 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm D SOT337-1 E A X c y HE v M A Z 8 14 Q A2 A (A 3) A1 pin 1 index Lp L 7 1 detail X w M bp e 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) mm 2 0.21 0.05 1.80 1.65 0.25 0.38 0.25 0.20 0.09 6.4 6.0 5.4 5.2 0.65 7.9 7.6 1.25 1.03 0.63 0.9 0.7 0.2 0.13 0.1 1.4 0.9 8 o 0 o Note 1. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT337-1 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 MO-150 Fig 15. Package outline SOT337-1 (SSOP14) 74LV132_5 Product data sheet (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 12 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1 E D A X c y HE v M A Z 8 14 Q (A 3) A2 A A1 pin 1 index Lp L 1 7 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (2) e HE L Lp Q v w y Z (1) mm 1.1 0.15 0.05 0.95 0.80 0.25 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 1 0.75 0.50 0.4 0.3 0.2 0.13 0.1 0.72 0.38 8 o 0 o Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT402-1 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-18 MO-153 Fig 16. Package outline SOT402-1 (TSSOP14) 74LV132_5 Product data sheet (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 13 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; SOT762-1 14 terminals; body 2.5 x 3 x 0.85 mm A B D A A1 E c detail X terminal 1 index area terminal 1 index area C e1 e 2 6 y y1 C v M C A B w M C b L 1 7 Eh e 14 8 13 9 Dh X 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT mm A(1) max. A1 b 1 0.05 0.00 0.30 0.18 c D (1) Dh E (1) Eh 0.2 3.1 2.9 1.65 1.35 2.6 2.4 1.15 0.85 e 0.5 e1 L v w y y1 2 0.5 0.3 0.1 0.05 0.05 0.1 Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. REFERENCES OUTLINE VERSION IEC JEDEC JEITA SOT762-1 --- MO-241 --- EUROPEAN PROJECTION ISSUE DATE 02-10-17 03-01-27 Fig 17. Package outline SOT762-1 (DHVQFN14) 74LV132_5 Product data sheet (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 14 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger 16. Abbreviations Table 11. Abbreviations Acronym Description CMOS Complementary Metal Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model TTL Transistor-Transistor Logic 17. Revision history Table 12. Revision history Document ID Release date Data sheet status Change notice Supersedes 74LV132_5 20090702 Product data sheet - 74LV132_4 Modifications: * Table 6: the conditions for HIGH-level output voltage and LOW-level output voltage have been changed. 74LV132_4 20071112 Product data sheet - 74LV132_3 74LV132_3 20040415 Product specification - 74LV132_2 74LV132_2 19980428 Product specification - 74LV132_1 74LV132_1 19970204 Product specification - - 74LV132_5 Product data sheet (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 15 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger 18. Legal information 18.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term `short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 18.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 18.3 Disclaimers General -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. 18.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 19. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com 74LV132_5 Product data sheet (c) NXP B.V. 2009. All rights reserved. Rev. 05 -- 2 July 2009 16 of 17 74LV132 NXP Semiconductors Quad 2-input NAND Schmitt trigger 20. Contents 1 2 3 4 5 6 6.1 6.2 7 8 9 10 11 12 13 14 15 16 17 18 18.1 18.2 18.3 18.4 19 20 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 3 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3 Functional description . . . . . . . . . . . . . . . . . . . 4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Recommended operating conditions. . . . . . . . 5 Static characteristics. . . . . . . . . . . . . . . . . . . . . 5 Dynamic characteristics . . . . . . . . . . . . . . . . . . 6 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Transfer characteristics. . . . . . . . . . . . . . . . . . . 7 Waveforms transfer characteristics . . . . . . . . . 8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 15 Legal information. . . . . . . . . . . . . . . . . . . . . . . 16 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 16 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Contact information. . . . . . . . . . . . . . . . . . . . . 16 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'. (c) NXP B.V. 2009. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 2 July 2009 Document identifier: 74LV132_5