For further information contact your local STMicroelectronics sales office.
September 2014 DocID023608 Rev 3 1/3
STM32373C-EVAL
Evaluation board for STM32F373xx microcontrollers
Data brief
Features
•STM32F373VCT6 microcontroller
•Four 5 V power supply options:
– Power jack
– ST-LINK/V2 USB connector
– User USB connector
– Daughter board
•Audio jack connected to I2S DAC
•Microphone connected to ADC through an
amplifier
•2-GByte (or more) MicroSD card on SPI
•Three components on I2C bus: temperature
sensor, EEPROM and dual interface RF
EEPROM
•RS-232 communication configurable for
communication of Flash loader
•IrDA transceiver
•240x320 TFT color LCD connected to SPI
interface
•Joystick with 4-direction control and selector
•Reset, Wakeup or Tamper, and Key buttons
•4 color user LEDs
•2 LEDs for MCU power range indicator
•ECG, pressure sensor and PT100 temperature
sensor connected to the 16-bit Sigma Delta
ADC of STM32F373VCT6
•Extension connectors for daughter board or
wrapping board
•MCU voltage: 3.3 V or adjustable 2.0 V - 3.6 V
•USB FS connector
•Touch slider
•RTC with backup battery
•CAN 2.0 A/B compliant connection
•Light dependent resistor (LDR)
•Two HDMI connectors with DDC and CEC
•IR transmitter and receiver
•Two ADC & DAC input and output signal
connectors and one Sigma Delta ADC input
signal connector
•Potentiometer
•JTAG/SWD and ETM trace debug support
•Embedded ST-LINK/V2
www.st.com
Description STM32373C-EVAL
2/3 DocID023608 Rev 3
Description
The STM32373C-EVAL evaluation board is designed as a complete demonstration and
development platform for STMicroelectronics ARM Cortex-M4 core-based
STM32F373VCT6 microcontroller. It features two I2Cs, three SPIs, three USARTs, one
CAN, one CEC controller, one 12-bit ADC, three 16-bit sigma delta ADCs, three 12-bit
DACs, internal 32-KByte SRAM and 256-KByte Flash, touch sensing slider, USB FS, and
JTAG debugging support. This evaluation board can be used as a reference design for user
application development but it is not considered as the final application.
The full range of hardware features on the board can help the user evaluate all peripherals
(USB FS, USART, audio DAC, microphone ADC, dot-matrix LCD, IrDA, LDR, MicroSD card,
HDMI CEC, ECG, pressure sensor, CAN, IR transmitter and receiver, EEPROM, touch
slider, temperature sensor, etc.) and develop their own applications. Extension headers
make it possible to easily connect a daughter board or wrapping board for a specific
application.
An ST-LINK/V2 is integrated on the board as an embedded in-circuit debugger and
programmer for the STM32 MCU.
The STM32373C-EVAL evaluation board does not support STM32F3x8 MCUs (1.65 V to
1.95 V power supply).
Ordering information
To order the evaluation board for STM32F373xx microcontrollers, use the
STM32373C-EVAL order code.
Revision history
Table 1. Document revision history
Date Revision Changes
03-Sep-2012 1 Initial release.
11-Mar-2013 2 Modified title and added Ordering information.
Added information on STM32F383xx MCUs in Description.
09-Sep-2014 3 Replaced “STM32F383xx MCUs” by “STM32F3x8 MCUs”
DocID023608 Rev 3 3/3
STM32373C-EVAL
3
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2014 STMicroelectronics – All rights reserved
