BCM4413 PRODUCT Brief BCM4413 B C M 4 4 1 3 PCI/MSI i L i n e 2 0 TM CONTROLLER S U M M A R Y F E AT U R E S * Combination HomePNA 2.0, 10/100 Ethernet, and V.90 PCI/Mini PCI modem with Fully Concurrent Operation O F B E N E F I T S Fully integrated iLine20 MAC/PHY, 10/100 Ethernet * MAC/PHY, and V.90 modem device for use in: * PCI/Mini PCI adapters * LAN on Motherboard * Internet Appliances and Broadband Gateways * Voice over IP (VoIP) Gateways * PC99 WHQL certified drivers for Windows 98, Windows Millennium Edition, and Windows 2000 * Meets PCI Power Management Interface v1.1 (ACPI) * HomePNA 2.0 * iLine20 speed-doubling mode - twice the data rate of baseline iLine10 HomePNA 2.0 solution * iLine20 is fully compatible with iLine10 and HPNA 1.0 * Rate adaptive line rate from 4 Mbps to 32 Mbps * Low-latency real-time multimedia (DFPQ) * 10/100 Ethernet * Complete 10/100 MAC/PHY and driver solution * IEEE802.3u compliant Transmit and Receive engines * Integrated MIB counters * Low power 10BASE-T/100BASE-TX IEEE 802.3u Fast Ethernet Transceiver Each interface operates concurrently as a separate * function, providing independent communication channels. Represents the highest level of integration for * consumer Internet communications functions. * Provides the lowest cost per communications function. Includes the speed-doubling feature of the HomePNA * 2.0 standard to support a maximum line rate of 32Mbps. PCI and Microprocessor Slave Interface bus options * allow integration into virtually any system. WHQL drivers for Windows 98, Windows * ME, andcertified Windows 2000 for all three functions. drivers are portable for embedded operating * All systems. * V.90 PCI Modem * High-performance V.90 software modem available * On-chip serial interface to external DAA/Codec * Efficient - uses only 30 MHz x86 CPU capacity * 2.5/3.3 V supply, 3/5 V PCI I/O * 196-ball FBGA BCM4413 System Diagram PCI BUS or MSI BUS 25 MHz RJ-45 10/100 Ethernet FILTER TRANSFORMER 64 MHz Phoneline BCM4413 iLine20 FILTER TRANSFORMER BCM4100 RJ-11 V.90 CODEC SERIAL EEPROM OPTIONAL BOOT ROM STATUS LEDs DAA B C M 4 4 1 3 O V E R V I E W V.90 Modem Tx FIFO Test Interface V.90 Modem Interface (for manufacturing test only) iLine20 MAC iLine20 DSP PHY Ethernet MAC Ethernet PHY JTAG Rx FIFO Tx FIFO PCI BUS PCI BUS Interface BCM4100 Rx FIFO Tx FIFO 10/100 Ethernet Rx FIFO PCI Configuration Registers SPROM Interface Serial EEPROM The Broadcom BCM4413 integrates HomePNA 2.0, 10/100 Ethernet MAC/PHY, and V.90 software modem interfaces, enabling complete Internet communications connectivity. By integrating all three functions the BCM4413 dramatically lowers the cost per function and allows ubiquitous high-speed connection to Cable, DSL, and Fixed-Wireless Broadband pipes throughout the home. HomePNA 2.0 everywhere means hundreds of dollars in installation costs can be saved while carrying voice, video, and data to each room in the house. Home Networking Function: The BCM4413 high-speed HomePNA 2.0 compliant Home Networking interface uses a highly adaptive integrated Internet Communications Processor that overcomes the wiring impairments on existing installed home phonelines. The BCM4413 Home Networking function operates on home telephone wiring without disturbing normal phone or modem operation or other services like POTS, V.90, ISDN, and ADSL. Broadcom's iLine20 implementation of the HomePNA 2.0 standard encompasses the required rate adaption between 4 Mbps-16 Mbps (iLine10) and the higher speed 8 Mbps-32 Mbps (iLine20) line rates. Boot ROM/ GPIO Interface LED Interface iLine20 LEDs Ethernet LEDs Boot ROM/ GPIO 10/100 Ethernet Function: The BCM4413 10/100 Ethernet function incorporates a complete IEEE802.3u compliant MAC and PHY. The MAC also supports management functions including RMON, Ethernet-like MIB, and IEEE 802.3u Ethernet MIB. The 10/100 PHY uses Broadcom's advanced Mini-TM architecture for low power and includes advanced power management. The 10/100 PHY also supports Auto-Negotiation and HP Auto-MDIX functions to eliminate installation errors. V.90 Modem Function: The BCM4413 controller includes a V.90 data/fax/voice modem interface to an external serial Modem Codec/DAA, allowing implementation of a complete, low-cost V.90 data/fax/voice soft modem. The V.90 data/fax/voice Software Modem driver is available for Windows 98, Windows ME, and Windows 2000, and can be ported to virtually any processor and operating system combination. Ordering Info: BCM4413 KPF Broadcom(R) and the pulse logo are registered trademarks of Broadcom Corporation and/or its subsidiaries in the United States and certain other countries. For more information please contact us at: Phone: 949-450-8700, FAX: 949-450-8710 Email: info@broadcom.com Visit our web site at: www.broadcom.com (c) 2000 by BROADCOM CORPORATION. All rights reserved. 4413-PB00-R-11.3.00 BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013