MSC0886.PDF ISO 9001 CERTIFIED REV J 7/06/2000
8700 E. Thomas Road
Scottsdale, AZ 85251
Tel: (480) 941-6300
Fax: (480) 947-1503
DESCRIPTION (300 watt)
This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in
an SO-8 configuration giving protection to 4 Bidirectional data or
interface lines. It is designed for use in applications where protection is
required at the board level from voltage transients caused by
electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical
fast transients (EFT) per IEC 1000-4-4 and effects of secondary
lighting.
These TVS arrays have a peak power rating of 300 watts for an 8/20 µsec pulse. This array is suitable for
protection of sensitive circuitry consisting of TTL, CMOS DRAM’s, SRAM’s, HCMOS, HSIC
microprocessors, and I/O transceivers. The SMDAXXC-4 product provides board level protection from
static electricity and other induced voltage surges that can damage sensitive circuitry.
FEATURES MECHANICAL
Protects up to 4 Bidirectional lines Molded SO-8 Surface Mount
Surge protection Per IEC 1000-4-2, 1000-4-4 Weight: 0.066 grams (approximate)
SO-8 Packaging Marking: Logo, device number, date code
Pin #1 defined by DOT on top of package
MAXIMUM RATINGS PACKAGING
Operating Temperatures: -550C to +1500CTape & Reel EIA Standard 481-1-A
Storage Temperature: -550C to +1500C13 inch reel 2,500 (OPTIONAL)
Peak Pulse Power: 300 Watts (8/20 µsec, Figure 1) Carrier tubes 95 pcs per (STANDARD)
Pulse Repetition Rate: <.01%
ELECTRICAL CHARACTERISTICS PER LINE @ 250C Unless otherwise specified
STAND
OFF
VOLTAG
E
VWM
VOLTS
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
LEAKAGE
CURRENT
ID
@ VWM
µA
CAPACITANCE
(f=1 MHz)
@0V
C
pF
TEMPERATURE
COEFFICIENT
OF VBR
áVBR
mV/°C
PART
NUMBER DEVICE
MARKING
MAX MIN MAX MAX MAX TYP MAX
SMDA03C-4 REA 3.3 47.0 9.0 200 300 -5
SMDA05C-4 REB 5.0 6.0 9.8 11 400 200 3
SMDA12C-4 REC 12.0 13.3 19.0 24 1 185 10
SMDA15C-4 RED 15.0 16.7 24.0 30 1 140 13
SMDA24C-4 REE 24.0 26.7 43.0 55 1 90 30
NOTE: TVS product is normally selected based on its stand off Voltage VWM. Product selected voltage should be
equal to or greater than the continuous peak operating voltage of the circuit to be protected.
Application: The SMDAXXC-4 product is designed for transient voltage suppression protection of ESD sensitive
components at the board level. It is an ideal product to be used for protection of I/O Transceivers.
SMDA03C-4
thru
SMDA24C-4
TVSarray Series
MSC0886.PDF ISO 9001 CERTIFIED REV J 7/06/2000
SMDA03C-4 thru SMDA24C-4
WAVE FORMS
FIGURE 1 FIGURE 2
Peak Pulse Power Vs Pulse Time Pulse Wave Form
MOUNTING PAD SO-8 CIRCUIT DIAGRAM
SO-8 PACKAGE
010 20 30
0
50
100
t -- Time in microsec
Ipp -- Peak Pulse Current -- % Ipp
Peak Value -- Ipp
Half-Value -- Ipp
2
8 X 20 Waveform
t
t
d
0.245
MIN
0.045±.005
.160±.005
.050 TYP
.030±.005
INCHES
MILLIMETERS
MAX
MIN
DIM
MAX
MIN
0.197
A
0.188
0.158
0.150
0.069
0.053
0.021
0.011
0.050
0.016
0.050 BSC
1.27 BSC
0.010
0.006
0.008
0.004
0.206
0.189
B
C
D
F
G
J
K
L
0.244
P
0.228