2
nectorpower.com
NECTOR M Power SystemTE Connectivity
The NECTOR M Power system is a fully pluggable, lighting and power electrical modular
wiring connector and cabling system for permanent electrical installations in the con-
struction industry.
APPLICATIONS
• Commercial Oce / Retail Buildings
• Hospitals
• Schools
• Hotels
• Factory Built Construction
ELECTRICAL
• Operating Voltage: 250 VAC
• Operating current:
MECHANICAL
• Operating temperature: -40°C to 70° C (depending on cable used)
100°C on insulating parts
• UV Resistant: Black connectors only
• Seal Rating: IP20
• Wire Termination: Closed barrel pin & socket crimped terminals
STANDARDS
• IEC 61535
PRODUCT SPECIFICATIONS
3 position connector:
Application Specification: 114-20152
Product Specification: 108-20304
Packaging Specification (Connectors): 107-20294
Packaging Specification (Terminals): 107-20295
5, 6 & 7 position connector:
Application Specification: 114-20169
Product Specification: 108-20324
Packaging Specification (Connectors): 107-20300
Packaging Specification (Terminals): 107-20295
Pole configurations
3 Pole (L, N, ground)
5 Pole (L1, S1, S2, N, ground)
6 Pole (L1, L2, S1, S2, N, ground)
7 Pole (L1, L2, L3, S1, S2, N, ground)
BENEFITS
• Fully pluggable, modular wiring
electrical installation system
• 3, 5, 6 & 7 position connector
systems
• Connectors available in white
and black
• Housing keying options prevent
mis-mating
• Cable assemblies available upon
request
• Circular form factor simplifies
routing during installations
• 3 Pole System fits through a
15mm diameter opening
• 5, 6 & 7 Pole System fits through
a 22mm diameter opening
• Tool disconnect required by IEC
standards
Nominal Wire Cross
Sectional Area (mm2)
Single phase circuit
(2w. loaded max.) Current max.
Multi-phase circuit
(32.loaded max.) Current max.
1.5 16A 10A
2.5 20A 16A