T-1 (3mm) BLINKING LED LAMP Part Number: L-36BID High Efficiency Red Features Description z T-1 package with rectangular base. The High Efficiency Red source color devices are made with z With built-in blinking IC. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Operation voltage from 3.5V to 14V. Light Emitting Diode. z Blinking frequency from 3.0Hz to 1.5Hz. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAB7626 REV NO: V.8A DATE: APR/03/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003774 Selection Guide Part No. Dice L-36BID Iv (mcd) V= 9V Lens Type High Efficiency Red (GaAsP/GaP) Red Diffused Viewing Angle [1] Min. Typ. 12 25 *6 *15 21/2 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Min. Typ. peak Peak Wavelength High Efficiency Red 627 nm D Dominant Wavelength High Efficiency Red 617 nm 1/2 Spectral Line Half-width High Efficiency Red 45 nm IF Forward Current High Efficiency Red 22 mA Min:VF=3.5V Typ:VF=5V ISON Supply Current High Efficiency Red 8 mA VF=3.5V ISON Supply Current High Efficiency Red 44 mA VF=14V f Blink Frequency High Efficiency Red Hz VF=3.5V~14V 8 1.5 Max. 3 Units Test Conditions Note: 1.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Units Power dissipation 310 mW Forward Voltage 14 V Reverse Voltage 0.5 V Operating Temperature -40C To +70C Storage Temperature -40C To +85C Lead Solder Temperature [1] 260C For 3 Seconds Lead Solder Temperature [2] 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAB7626 REV NO: V.8A DATE: APR/03/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003774 High Efficiency Red L-36BID SPEC NO: DSAB7626 REV NO: V.8A DATE: APR/03/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003774 PACKING & LABEL SPECIFICATIONS L-36BID SPEC NO: DSAB7626 REV NO: V.8A DATE: APR/03/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003774 SPEC NO: DSAB7626 REV NO: V.8A DATE: APR/03/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003774 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAB7626 REV NO: V.8A DATE: APR/03/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003774