VSMY385010
www.vishay.com Vishay Semiconductors
Rev. 1.0, 27-May-15 1Document Number: 84294
For technical questions, contact: emittertechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Speed Infrared Emitting Diode, 850 nm,
Surface Emitter Technology
DESCRIPTION
As part of the SurfLightTM portfolio, the VSMY385010 is an
infrared, 850 nm emitting diode based on surface emitter
technology with high radiant intensity, high optical power
and high speed, molded in a PLCC-2 package for surface
mounting (SMD).
FEATURES
• Package type: surface mount
• Package form: PLCC-2
• Dimensions (L x W x H in mm): 3.5 x 2.8 x 1.75
• Peak wavelength: p = 850 nm
• High reliability
• High radiant power
• High radiant intensity
• Angle of half intensity: = ± 60°
• Floor life: 168 h, MSL 3, acc. J-STD-020
• Lead (Pb)-free reflow soldering
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
RELEASED FOR APPLICATIONS
Infrared radiation source for operation with CMOS cameras
(illumination)
• High speed IR data transmission
• IR touch panels
•3D gaming
•Light curtain
Note
• Test conditions see table “Basic Characteristics”
Note
• MOQ: minimum order quantity
948553
PRODUCT SUMMARY
COMPONENT Ie (mW/sr) (deg) p (nm) tr (ns)
VSMY385010 9 ± 60 850 10
ORDERING INFORMATION
ORDERING CODE PACKAGING REMARKS PACKAGE FORM
VSMY385010-GS08 Tape and reel MOQ: 7500 pcs, 1500 pcs/reel PLCC-2
VSMY385010-GS18 Tape and reel MOQ: 8000 pcs, 8000 pcs/reel PLCC-2
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Reverse voltage VR5V
Forward current IF70 mA
Pulse peak forward current tp/T = 0.5, tp 100 μs IFM 140 mA
Surge forward current tp = 100 μs IFSM 1A
Power dissipation PV140 mW
Junction temperature Tj100 °C
Operating temperature range Tamb -40 to +85 °C
Storage temperature range Tstg -40 to +85 °C
Soldering temperature acc. figure 7, J-STD-020 Tsd 260 °C
Thermal resistance junction/ambient J-STD-051, soldered on PCB RthJA 250 K/W
VSMY385010
www.vishay.com Vishay Semiconductors
Rev. 1.0, 27-May-15 2Document Number: 84294
For technical questions, contact: emittertechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Power Dissipation Limit vs. Ambient Temperature Fig. 2 - Forward Current Limit vs. Ambient Temperature
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 3 - Forward Current vs. Forward Voltage Fig. 4 - Relative Forward Voltage vs. Ambient Temperature
0
20
40
60
80
100
120
140
0 20406080100
PV- Power Dissipation (mW)
Tamb - Ambient Temperature (°C)
RthJA = 250 K/W
0
10
20
30
40
50
60
70
80
0 20406080100
IF- Forward Current (mA)
Tamb - Ambient Temperature (°C)
RthJA = 250 K/W
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Forward voltage IF = 70 mA, tp = 20 ms VF1.6 2.0 V
IF = 1 A, tp = 100 μs VF2.9 V
Temperature coefficient of VFIF = 70 mA TKVF -1.5 mV/K
Reverse current IRnot designed for reverse operation μA
Junction capacitance VR = 0 V, f = 1 MHz, E = 0 Cj125 pF
Radiant intensity IF = 70 mA, tp = 20 ms Ie5.5 9 16 mW/sr
IF = 1 A, tp = 100 μs Ie130 mW/sr
Radiant power IF = 70 mA, tp = 20 ms e40 mW
Temperature coefficient of eIF = 70 mA TKe-0.25 %/K
Angle of half intensity ± 60 deg
Peak wavelength IF = 50 mA p840 850 870 nm
Spectral bandwidth IF = 50 mA 35 nm
Temperature coefficient of pIF = 70 mA TKp0.26 nm/K
Rise time IF = 70 mA tr10 ns
Fall time IF = 70 mA tf10 ns
10
100
1000
1.2 1.4 1.6 1.8 2.0
IF- Forward Current (mA)
VF- Forward Voltage (V)
tp= 20 ms
90
95
100
105
110
115
-50 -25 0 25 50 75 100 125
VF, rel - Relative Forward Voltage (%)
Tamb - Ambient Temperature (°C)
IF= 70 mA
tp= 20 ms
VSMY385010
www.vishay.com Vishay Semiconductors
Rev. 1.0, 27-May-15 3Document Number: 84294
For technical questions, contact: emittertechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 5 - Radiant Intensity vs. Forward Current
Fig. 6 - Relative Radiant Intensity vs. Ambient Temperature
Fig. 7 - Relative Radiant Intensity vs. Wavelength
Fig. 8 - Relative Radiant Intensity vs. Angular Displacement
1
10
100
10 100 1000
Ie- Radiant Intensity (mW/sr)
IF- Forward Current (mA)
tp= 20 ms
50
60
70
80
90
100
110
120
130
140
150
-50 -25 0 25 50 75 100 125
Ie, rel - Relative Radiant Intensity (%)
Tamb - Ambient Temperature (°C)
IF= 70 mA
tp= 20 ms
0
10
20
30
40
50
60
70
80
90
100
750 800 850 900 950 1000 1050
Ie, rel - Relative Radiant Intensity (%)
λ- Wavelength (nm)
IF= 70 mA
Ie, rel - Relative Radiant Intensity
λ- Wavelength (nm)
0.6
80°
0°
0.7
0.4 0.2 0
30°
70°
60°
50°
40°
10° 20°
1.0
0.9
0.8
ϕ- Angular Displacement
VSMY385010
www.vishay.com Vishay Semiconductors
Rev. 1.0, 27-May-15 4Document Number: 84294
For technical questions, contact: emittertechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters
SOLDER PROFILE Fig. 9 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020
AC
Ø2.4
Pin identication
3.5
±0.2
1.75
±0.1
0.9
2.8
±0.15
2.2
3
+0.15
Mounting Pad Layout
4
4
1.2
2.6 (2.8)
1.6 (1.9)
0.8
Dimensions: Reow and vapor phase (wave soldering)
Drawing-No.: 6.541-5067.02-4
specications
according to DIN
Technical drawings
Issue: 5; 23.09.13
Dimensions in mm
Area covered
with solderresist
0
50
100
150
200
250
300
0 50 100 150 200 250 300
Time (s)
Temperature (°C)
240 °C 245 °C
max. 260 °C
max. 120 s max. 100 s
217 °C
max. 30 s
max. ramp up 3 °C/s
max. ramp down 6 °C/s
19841
255 °C
VSMY385010
www.vishay.com Vishay Semiconductors
Rev. 1.0, 27-May-15 5Document Number: 84294
For technical questions, contact: emittertechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DRYPACK
Devices are packed in moisture barrier bags (MBB) to
prevent the products from moisture absorption during
transportation and storage. Each bag contains a desiccant.
FLOOR LIFE
Floor life (time between soldering and removing from MBB)
must not exceed the time indicated on MBB label:
Floor life: 168 h
Conditions: Tamb < 30 °C, RH < 60 %
Moisture sensitivity level 3, according to J-STD-020.
DRYING
In case of moisture absorption devices should be baked
before soldering. Conditions see J-STD-020 or label.
Devices taped on reel dry using recommended conditions
192 h at 40 °C (+ 5 °C), RH < 5 %.
TAPE AND REEL
PLCC-2 components are packed in antistatic blister tape
(DIN IEC (CO) 564) for automatic component insertion.
Cavities of blister tape are covered with adhesive tape.
Fig. 10 - Blister Tape
Fig. 11 - Tape Dimensions in mm for PLCC-2
MISSING DEVICES
A maximum of 0.5 % of the total number of components per
reel may be missing, exclusively missing components at the
beginning and at the end of the reel. A maximum of three
consecutive components may be missing, provided this gap
is followed by six consecutive components.
Fig. 12 - Beginning and End of Reel
The tape leader is at least 160 mm and is followed by a
carrier tape leader with at least 40 empty compartments.
The tape leader may include the carrier tape as long as the
cover tape is not connected to the carrier tape. The least
component is followed by a carrier tape trailer with a least
75 empty compartments and sealed with cover tape.
Fig. 13 - Dimensions of Reel-GS08
Fig. 14 - Dimensions of Reel-GS18
COVER TAPE REMOVAL FORCE
The removal force lies between 0.1 N and 1.0 N at a removal
Adhesive tape
Component cavity
Blister tape
94 8670
1.85
1.65
4.0
3.6
3.6
3.4
2.05
1.95
1.6
1.4
4.1
3.9
4.1
3.9
5.75
5.25
8.3
7.7
3.5
3.1
2.2
2.0
0.25
94 8668
De-reeling direction
Tape leader
min. 75 empty
compartments
> 160 mm
40 empty
compartments
Carrier leader Carrier trailer
94 8158
180
178
4.5
3.5
2.5
1.5
13.00
12.75
63.5
60.5
14.4 max.
10.0
9.0
120°
94 8665
Identification
Label:
Vishay
type
group
tape code
production
code
quantity
321
329
Identification
4.5
3.5
2.5
1.5
13.00
12.75
62.5
60.0
14.4 max.
10.4
8.4
120°
18857
Label:
Vishay
type
group
tape code
production
code
quantity
VSMY385010
www.vishay.com Vishay Semiconductors
Rev. 1.0, 27-May-15 6Document Number: 84294
For technical questions, contact: emittertechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
speed of 5 mm/s. In order to prevent components from
popping out of the blisters, the cover tape must be pulled off
at an angle of 180° with regard to the feed direction.
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2021 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
