VSMB1940X01 www.vishay.com Vishay Semiconductors High Speed Infrared Emitting Diode, 940 nm, GaAlAs Double Hetero FEATURES 21531 DESCRIPTION VSMB1940X01 is an infrared, 940 nm emitting diode in GaAlAs Double Hetero technology with high radiant power and high speed, molded in clear, untinted 0805 plastic package for surface mounting (SMD). * * * * * * * * * * * * * * * * Package type: surface mount Package form: 0805 Dimensions (L x W x H in mm): 2 x 1.25 x 0.85 AEC-Q101 qualified Peak wavelength: p = 940 nm High reliability High radiant power High radiant intensity High speed Angle of half sensitivity: = 60 Low forward voltage Suitable for high pulse current operation 0805 standard surface-mountable package Floor life: 168 h, MSL 3, according to J-STD-020 Lead (Pb)-free reflow soldering Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * High speed IR data transmission * High power emitter for low space applications * High performance transmissive or reflective sensors PRODUCT SUMMARY COMPONENT Ie (mW/sr) (deg) p (nm) tr (ns) VSMB1940X01 6 60 940 15 Note * Test conditions see table "Basic Characteristics" ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM VSMB1940X01 Tape and reel MOQ: 3000 pcs, 3000 pcs/reel 0805 Note * MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage VR 5 V Forward current IF 100 mA mA Peak forward current tp/T = 0.5, tp = 100 s IFM 200 Surge forward current tp = 100 s IFSM 1 A PV 160 mW Power dissipation Junction temperature Tj 100 C Operating temperature range Tamb -40 to +85 C Storage temperature range Tstg -40 to +100 C According to Fig. 9, J-STD-020 Tsd 260 C JESD 51 RthJA 270 K/W Soldering temperature Thermal resistance junction / ambient Rev. 1.5, 30-Jun-16 Document Number: 81933 1 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMB1940X01 www.vishay.com Vishay Semiconductors 120 160 IF - Forward Current (mA) PV - Power Dissipation (mW) 180 140 120 100 RthJA = 270 K/W 80 60 40 100 80 60 RthJA = 270 K/W 40 20 20 0 0 10 21532 20 30 40 50 60 70 80 0 90 100 Tamb - Ambient Temperature (C) 0 20 Fig. 1 - Power Dissipation Limit vs. Ambient Temperature 40 60 80 100 Tamb - Ambient Temperature (C) 21533 Fig. 2 - Forward Current Limit vs. Ambient Temperature BASIC CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER Forward voltage Temperature coefficient of VF Reverse current Junction capacitance Radiant intensity Radiant power Temperature coefficient of radiant power TEST CONDITION SYMBOL MIN. TYP. MAX. IF = 100 mA, tp = 20 ms VF 1.15 1.35 1.6 UNIT V IF = 1 A, tp = 100 s VF - 2.2 - V IF = 1 mA TKVF - -1.5 - mV/K IF = 100 mA TKVF - -1.1 - mV/K VR = 5 V IR - - 10 A VR = 0 V, f = 1 MHz, E = 0 mW/cm2 CJ - 70 - pF IF = 100 mA, tp = 20 ms Ie 3 6 12 mW/sr IF = 1 A, tp = 100 s Ie - 60 - mW/sr IF = 100 mA, tp = 20 ms e - 40 - mW IF = 1 mA TKe - -1.1 - %/K IF = 100 mA TKe - -0.51 - %/K - 60 - deg nm Angle of half intensity Peak wavelength IF = 30 mA p - 940 - Spectral bandwidth IF = 30 mA - 25 - nm Temperature coefficient of p IF = 30 mA TKp - 0.25 - nm Rise time IF = 100 mA, 20 % to 80 % tr - 15 - ns Fall time IF = 100 mA, 20 % to 80 % tf - 15 - ns d - 0.5 - mm Virtual source diameter Rev. 1.5, 30-Jun-16 Document Number: 81933 2 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMB1940X01 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 180 Ie rel - Relative Radiant Intensity (%) 100 10 tp = 100 s tp/T= 0.001 IF = 1 mA 160 140 120 IF = 100 mA 100 80 60 tp = 20 ms 1 40 0 1 2 3 VF - Forward Voltage (V) 21534 - 60 - 40 - 20 Fig. 3 - Forward Current vs. Forward Voltage 40 60 80 100 106 104 102 IF = 100 mA 100 IF = 10 mA 98 tp = 20 ms 96 94 IF = 1 mA 92 e rel - Relative Radiant Power (%) 100 108 90 - 40 - 20 0 20 40 60 80 90 IF = 30 mA 80 70 60 50 40 30 20 10 0 840 100 Tamb - Ambient Temperature (C) 21443 880 920 960 1000 1040 - Wavelength (nm) 21445 Fig. 4 - Relative Forward Voltage vs. Ambient Temperature Fig. 7 - Relative Radiant Power vs. Wavelength 0 100 10 20 30 Ie, rel - Relative Radiant Intensity Ie - Radiant Intensity (mW/sr) 20 Fig. 6 - Relative Radiant Intensity vs. Ambient Temperature 110 VF, rel - Relative Forward Voltage (%) 0 Tamb - Ambient Temperature (C) 21444 10 tp = 1 s 1 0.1 40 1.0 0.9 50 0.8 60 0.01 1 20921 10 100 1000 IF - Forward Pulse Current (mA) Fig. 5 - Radiant Intensity vs. Forward Current Rev. 1.5, 30-Jun-16 70 0.7 - Angular Displacement IF - Forward Current (mA) 1000 80 0.6 0.4 0.2 0 948013-1 Fig. 8 - Relative Radiant Intensity vs. Angular Displacement Document Number: 81933 3 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMB1940X01 www.vishay.com Vishay Semiconductors REFLOW SOLDER PROFILE DRYPACK 300 Temperature (C) max. 260 C 245 C 255 C 240 C 217 C 250 FLOOR LIFE Time between soldering and removing from MBB must not exceed the time indicated in J-STD-020: 200 max. 30 s 150 Moisture sensitivity: level 3 max. 100 s max. 120 s Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. Floor life: 168 h 100 max. ramp down 6 C/s 50 Conditions: Tamb < 30 C, RH < 60 % max. ramp up 3 C/s DRYING 0 0 50 100 19841 150 200 250 300 Time (s) Fig. 9 - Lead (Pb)-free Reflow Solder Profile According to J-STD-020 In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or label. Devices taped on reel dry using recommended conditions 192 h at 40 C (+ 5 C), RH < 5 %. PACKAGE DIMENSIONS in millimeters 20018 Rev. 1.5, 30-Jun-16 Document Number: 81933 4 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMB1940X01 www.vishay.com Vishay Semiconductors BLISTER TAPE DIMENSIONS in millimeters 21501 Rev. 1.5, 30-Jun-16 Document Number: 81933 5 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMB1940X01 www.vishay.com Vishay Semiconductors REEL DIMENSIONS in millimeters 8.4 +2.5 O 177.8 max. O 55 min. 8.4 +0.15 Z Form of the leave open of the wheel is supplier specific. 14.4 max. O 20.2 min. 1.5 min. O 13 - 0.2 + 0.5 Z 2:1 Drawing-No.: 9.800-5096.01-4 Issue: 2; 26.04.10 20875 Rev. 1.5, 30-Jun-16 technical drawings according to DIN specifications Document Number: 81933 6 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000