reserved Schutzvermerk nach DIN 34 beachten Copyright 09.04.03 @) Bernstein [ Technical data sheet Postfach, 1164 Westfalica LT I 2-SA2/ Hw Ro 1 3 * 5 608.8871.018) M16x1.5 c OE Positive opening operation according to DIN EN 60947-5-1 IEC 60947-5-1 al On OF f 10.5, _ < 0.4 21 tO 1.5 ahd i ee a | Gp3.8 a a 21 Wr 22 4.6mm =| 11 Le t a7 Switching Switching = = diagram symbo | Tolerance: operating point +0.25mm; actuating force +104 Mechanical features Enclosure: Cover: Actuator: Ambient air temperature: Contact type: Mechanical life: Switch frequency: Mounting: Connection type: Conductor cross-section: Cable entry size: Weight: Electrical features Rated insulation voltage: Conventional thermal current: Max. inrush current: Utilization categorie: Standards: Protection class CSA/UL: Short circuit protection: Approach possibilities (|P-Code): PBT, glass fibre reinforced PA6.6, black Lever with roller -30C up to +80C 2 NC-contacts (Zb) (thermoplast) 3x10 switch operations max. 100/min 2xM4 or 2xM5 fixed positioning for safety applications 4 screw connections (M3.5) single core 0.5-1.5mm? / litz wire with connector sleeve 0.5-1.5mm? 1 x M16x1.5 approx. 0,04kg U;= 250 V AC lthe= 10A according to AC 15,A300 340V/3A, according to EN 60947-1; IP65 according to EN 60529; 10A 300V, A300 Fuse 6A gL/gG, IEC 60947-5-1 120V/6A / DC 13,Q300 250V/0.27A, EN 60947-5-1 DIN VDE 0470 T1 125V/0.55A IEC/EN 60947-5-1, appendix K By loosening the 4 screws the Actuation Assembly can be rotated in 90 degree increments such that 4 Actuation directions are possible. The Actuation Assembly is to be again fastened to the housing using the 4 screws. Remarks The moving parts should be oiled periodically. The rated protection class (IP-Code) is valid Land when using an at least equivalent cable gland. only at closed cover Copies are not retreated in case of alternations