1.27 mm pitch connector IDC type female connector for cable RPS-D( )( )F( )+ For cable IDC (0.635 mm) Daisy chain Configuration of product Part No. RPS- D ( ) ( ) F ( )+ Compatible cable Series name For 0.635mm pitch flat cables (Daisy Chain) Blank: #32AWG (7/0.08) (t=0.6mm) No. of contacts: 20, 40, 50, 60, 68, 80 or 100 #30AWG (1/0.254) FK: Female (t=0.6mm) Strain relief B : #30AWG (7/0.102) Blank : None (t=0.6mm) R : Relief appending Type of contact F: Female 29.21 8.89 1.27 8.89 For 20-contact connector 8.89 For 52-contact connector 7.2 5.5 2.54 A C 34.29 12.7 8.89 B 2.5 4.5 39.37 8.89 8.89 17.78 7.62 14.5 For 34-contact connector TM 0.635 D 8.89 For 60-contact connector For 26-contact connector 8.89 For 68-contact connector 46.99 21.59 8.89 8.89 8.89 For 40-contact connector 8.89 8.89 For 80-contact connector 59.69 27.94 8.89 8.89 For 50-contact connector 8.89 8.89 8.89 8.89 For 100-contact connector Key-location symbols and key-groove dimensions D 0.635 (Appending) Dimensions A Part No. RPS-D20( )F( )+ A 18.57 B 15.67 C 11.43 D 12.065 RPS-D40( )F( )+ 31.27 28.37 24.13 24.765 RPS-D50( )F( )+ 37.62 34.72 30.48 31.115 Ground plate Contacts RPS-D60( )F( )+ 43.97 41.07 36.83 37.465 RPS-D68( )F( )+ 49.05 46.15 41.91 42.545 Cable housings B Strain relief RPS-D80( )F( )+ 56.67 53.77 49.53 50.165 RPS-D100( )F( )+ 69.37 66.47 62.23 62.865 Components Insulator Cable housings A (Appending) Mating connectors: RPS-( )RM+, RPS-( )RLM+ RPS-D40MB+ (40-contact connector only) Accessories: RPS-PK Tool: IDC locator: FLPT-0001A, Hand presser: RPS-K4 (Refer to page Tool-13) Others Wire wrapping Crimping Soldering IDC Press-in SMT Through hole