TECHNICAL DATA SHEET TE Document: TTDS-113 Issue: 4 Date: April 2014 CM-SCE-TP Cable Marker CM-SCE-TP Cable markers are flat, non-adhesive labels that can be used to identify large cables and wire bundles in particularly aggressive environments. Cable markers can be applied post cable termination using cable ties. Manufactured using a specially developed radiation cross-linked flame retarded polymer. Typical installations include mass transit, Military and Aerospace. These Cable markers are printed using Thermal transfer technology KEY FEATURES TEMPERATURE RATING Highly flame resistant - excellent resistance to burning (Oxygen Index 35%) Operating Temperature Range -55C to 135C (-67F to 275F) Resistant to key industrial and military grade fluids (defined by RW-2513) ENVIRONMENTAL The Cable marker, including the print, does not promote mould growth (ASTM G21 / 28 days - zero rating) Does not migrate substances which will damage or corrode the surrounding environment, including the conductor APPLICATIONS Post termination cable identification Identification of large cables, wire bundles or pipework Installation friendly - easy to replace, ideal for retrofitting and repairs. Only cable ties wraps are needed Mass transit, Rail, Aerospace, Marine, Military and Industrial PRINTER INFORMATION Print Quality and Print Performance can only be guaranteed when specific TE printer and ribbons are used The current list of printers and ribbons can be found in TE document 411-121005 `Identification Printer Product Ribbon Matrix' Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the `TE Product Compliance Support Centre': http://www.te.com/en/resources/product-compliance.html SPECIFICATIONS / APPROVALS TE Connectivity Standard RW-2513 Industry UL Certification MH26328 Group PG1S2 Mass Transit EN45545-2 `Hazard Classification 3' Requirement Set R24 SOFTWARE This document can be found at the TE document repository: http://www.te.com/commerce/DocumentDelivery/DDE Controller Cable Markers are fully supported by WINTOTAL and PrintEasy label printing software, available from the TE product store: http://www.te.com/en/general/label-printing-software.html Contact a TE representative for further information Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2513 (c)2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. | Indicates Change Class I Data Classification - See Policy TEC-02-04 Page 1 of 2 TECHNICAL DATA SHEET ORDERING INFORMATION TE Document: TTDS-113 Issue: 4 Date: April 2014 CM-SCE-TP Cable Marker PART DESCRIPTION OPTIONS Cable marker size CM-SCE-TP -2.5K -1/4 -4H -9 Color Cable tie holes Markable height of marker (inches) Pack size Product family 1/4 or 1/2 inch Cable tie holes 4 or 6 Pack sizes 250 or 2500 (2.5k) pieces Color White standard (-9) or Yellow non-standard (-4) ORDERING INFORMATION: Specify product family, pack size, markable height, number of cable tie holes and color. AVAILABLE FORMATS 5 64.1 64.1 12.7 51.4 51.4 20.3 12.7 12.7 12.7 12.7 12.7 51.5 10.4 10.4 CM-SCE-TP-1/2-4H 5 12.7 20.3 12.7 12.7 51.5 CM-SCE-TP-1/4-6H CM-SCE-TP-1/4-4H CM-SCE-TP-1/2-6H Dimensions in mm CM-SCE-TP-1/4- Markable height mm inches 6.4 0.25 Markable length mm inches 50.8 2 CM-SCE-TP-1/2- 12.7 50.8 Part Description 0.50 2 Recommended cable use range mm inches 5.08 - 12.5 0.2 - 0.492 12.5 and up 0.492 and up While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners. (c)2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. | Indicates Change Class I Data Classification - See Policy TEC-02-04 Page 2 of 2 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: CM-SCE-TP-1/4-4H-9