©2014 Tyco Electronics Corporation, a TE Connectivity Ltd.
Company. All Rights Reserved.
| Indicates Change
Class I Data Classification - See Policy TEC-02-04
CM-SCE-TP Cable markers are flat, non-adhesive labels that can be
used to identify large cables and wire bundles in particularly
aggressive environments. Cable markers can be applied post cable
termination using cable ties.
Manufactured using a specially developed radiation cross-linked
flame retarded polymer. Typical installations include mass transit,
Military and Aerospace.
These Cable markers are printed using Thermal transfer technology
Highly flame resistant - excellent resistance
to burning (Oxygen Index 35%)
Resistant to key industrial and military grade
fluids (defined by RW-2513)
Operating Temperature Range -55°C to 135°C (-67°F to 275°F)
The Cable marker, including the print, does not promote mould
growth (ASTM G21 / 28 days – zero rating)
Does not migrate substances which will damage or corrode the
surrounding environment, including the conductor
Further information and a downloadable declaration covering RoHS
and REACH compliance can be found at the ‘TE Product
Compliance Support Centre’:
http://www.te.com/en/resources/product-compliance.html
Post termination cable identification
Identification of large cables, wire bundles or
pipework
Installation friendly – easy to replace, ideal
for retrofitting and repairs. Only cable ties
wraps are needed
SPECIFICATIONS / APPROVALS
Mass transit, Rail, Aerospace, Marine,
Military and Industrial
TE Connectivity Standard
RW-2513
Industry
UL Certification MH26328 Group PG1S2
Mass Transit
EN45545-2 ‘Hazard Classification 3’ Requirement Set R24
SOFTWARE
Print Quality and Print Performance can only be
guaranteed when specific TE printer and ribbons are
used
The current list of printers and ribbons can be found in
TE document 411-121005 ‘Identification Printer
Product Ribbon Matrix’
This document can be found at the TE document
repository:
Cable Markers are fully supported by WINTOTAL and PrintEasy
label printing software, available from the TE product store:
http://www.te.com/en/general/label-printing-software.html
Contact a TE representative for further information
http://www.te.com/commerce/DocumentDelivery/DDE
Controller
Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an
assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2513