TIP29, 30 High Power Bipolar Transistor Features: * Collector-Emitter sustaining voltageVCEO(sus) = 60V (Minimum) - TIP29A, TIP30A = 100V (Minimum) - TIP29C, TIP30C. * Collector-Emitter saturation voltageVCE(sat) = 0.7V (Maximum) at IC = 1.0A. * Current gain-bandwidth product fT = 3.0MHz (Minimum) at IC = 200mA. Pin 1. Base 2. Collector 3. Emitter Dimensions Minimum Maximum A 14.68 15.31 B 9.78 10.42 C 5.01 6.52 D 13.06 14.62 E 3.57 4.07 F 2.42 3.66 G 1.12 1.36 H 0.72 0.96 I 4.22 4.98 J 1.14 1.38 K 2.20 2.97 L 0.33 0.55 M 2.48 2.98 O 3.70 3.90 NPN TIP29A TIP29C PNP TIP30A TIP30C 1.0 Ampere Complementary Silicon Power Transistors 40 - 100 Volts 30 Watts TO-220 Dimensions : Millimetres 4. Collector(Case). Page 1 31/05/05 V1.0 TIP29, 30 High Power Bipolar Transistor Maximum Ratings Characteristic Symbol TIP29A TIP30A TIP29C TIP30C 60 100 Unit Collector-Emitter Voltage VCEO Collector-Base Voltage VCBO Emitter-Base Voltage VEBO 5.0 Collector Current-Continuous -Peak IC 1.0 3.0 Base Current IB 0.4 Total Power Dissipation at TC = 25C Derate above 25C PD 30 0.24 W W/C TJ, TSTG -65 to +150 C Operating and Storage Junction Temperature Range V A THERMAL CHARACTERISTICS Characteristic Symbol Maximum Unit Thermal Resistance Junction to Case Rjc 4.167 C/W Figure - 1 Power Derating Page 2 31/05/05 V1.0 TIP29, 30 High Power Bipolar Transistor Electrical Characteristics (TC = 25C unless otherwise noted) Characteristic Symbol Minimum Maximum Unit VCEO(sus) 60 100 - V ICEO - 0.3 ICES - 0.2 IEBO - 1.0 hFE 40 15 75 VCE(sat) - 0.7 OFF Characteristics Collector-Emitter Sustaining Voltage (1) TIP29A, TIP30A (IC = 30mA, IB = 0) TIP29C, TIP30C Collector Cut off Current (VCE = 30V, IB = 0) TIP29A, TIP30A TIP29C, TIP30C (VCE = 60V, IB = 0) Collector Cut off Current (VCE = 60V, VEB = 0) TIP29A, TIP30A (VCE = 100V, VEB = 0) TIP29C, TIP30C Emitter Cut off Current (VEB = 5.0V, IC = 0) mA ON CHARACTERISTICS (1) DC Current Gain (IC = 0.2A, VCE = 4.0V) (IC = 1.0A, VCE = 4.0V) Collector-Emitter Saturation Voltage (IC = 1.0A, IB = 125mA) - V Base-Emitter On Voltage (IC = 1.0A, VCE = 4.0V) VBE(on) - 1.3 Current Gain-Bandwidth Product (2) (IC = 200mA, VCE = 10V, f = 1MHz) fT 3.0 - Small Signal Current Gain (IC = 200mA, VCE = 10V, f = 1kHz) hfe 20 - DYNAMIC CHARACTERISTICS MHz - (1) Pulse Test: Pulse Width 300s, Duty Cycle 2.0%. (2) fT = hFE * fTEST. Page 3 31/05/05 V1.0 TIP29, 30 High Power Bipolar Transistor Figure - 3 Switching Time Equivalent Circuit Figure - 2 Turn-On Time Figure - 4 DC Current Gain Figure - 5 Turn-Off Time Figure - 6 Active Region Safe Operating Area There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown safe operating area curves indicate IC-VCE limits of the transistor that must be observed for reliable operation i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure - 6 curve is based on TJ(PK) = 150C; TC is variable depending on power level. Second breakdown pulse limits are valid for duty cycles to 10% provided TJ(PK) 150C. At high case temperatures, thermal limitation will reduce the power that can be handled to values less than the limitations imposed by second breakdown. Page 4 31/05/05 V1.0 TIP29, 30 High Power Bipolar Transistor Specifications TYPE Part Number TIP29A NPN TIP29C TIP30A PNP TIP30C Page 5 31/05/05 V1.0 TIP29, 30 High Power Bipolar Transistor Notes: International Sales Offices: AUSTRALIA - Farnell InOne FINLAND - Farnell InOne NETHERLANDS - Farnell InOne SWITZERLAND - Farnell InOne Tel No: Tel No: Tel No: ++ 61 2 9645 8888 Fax No: ++ 61 2 9644 7898 Fax No: ++ 358 9 345 5411 Fax No: ++ 31 30 241 7333 Tel No: ++ 41 1 204 64 64 Fax No: ++ 41 1 204 64 54 AUSTRIA - Farnell InOne FRANCE - Farnell InOne NEW ZEALAND - Farnell InOne UK - Farnell InOne Tel No: Tel No: Tel No: Tel No: ++ 43 662 2180 680 ++ 358 9 560 7780 ++ 33 474 68 99 99 ++ 31 30 241 7373 ++ 64 9 357 0646 ++ 44 8701 200 200 Fax No: ++ 43 662 2180 670 Fax No: ++ 33 474 68 99 90 Fax No: ++ 64 9 357 0656 Fax No: ++ 44 8701 200 201 BELGIUM - Farnell InOne GERMANY - Farnell InOne NORWAY - Farnell InOne UK - BuckHickman InOne Tel No: Tel No: Tel No: ++ 45 44 53 66 66 ++ 44 8450 510 150 ++ 32 3 475 2810 ++ 49 89 61 39 39 39 Fax No: ++ 32 3 227 3648 Fax No: ++ 49 89 613 59 01 Fax No: ++ 45 44 53 66 02 ++ 44 8450 510 130 BRAZIL - Farnell-Newark InOne HONG KONG - Farnell-Newark InOne Tel No: ++ 852 2268 9888 PORTUGAL - Farnell InOne UK - CPC ++ 55 11 4066 9400 Tel No: ++ 34 93 475 8804 ++ 44 8701 202 530 Fax No: ++ 55 11 4066 9410 Fax No: ++ 852 2268 9899 Fax No: ++ 34 93 474 5288 ++ 44 8701 202 531 CHINA - Farnell-Newark InOne IRELAND - Farnell InOne SINGAPORE - Tel No: Tel No: Tel No: ++86 10 6238 5152 Fax No: ++86 10 6238 5022 Farnell-Newark InOne Tel No: ++ 65 6788 0200 ++ 353 1 830 9277 Fax No: ++ 353 1 830 9016 Fax No: ++ 65 6788 0300 export EXPORT - Farnell InOne Tel No: ++ 44 8701 200 208 Fax No: ++ 44 8701 200 209 For enquiries from all other markets DENMARK - Farnell InOne ITALY - Farnell InOne SPAIN - Farnell InOne Tel No: Tel No: Tel No: ++ 45 44 53 66 44 ++ 39 02 93 995 200 ++ 34 93 475 8805 Fax No: ++ 45 44 53 66 06 Fax No: ++ 39 02 93 995 300 Fax No: ++ 34 93 474 5107 ESTONIA - Farnell InOne MALAYSIA - SWEDEN - Farnell InOne http://www.farnellinone.com Tel No: ++ 358 9 560 7780 Fax No: ++ 358 9 345 5411 Farnell-Newark InOne Tel No: ++ 60 3 7873 8000 Fax No: ++ 60 3 7873 7000 Tel No: ++ 46 8 730 50 00 Fax No: ++ 46 8 83 52 62 http://www.buckhickmaninone.com http://www.cpc.co.uk Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2004. Page 6 31/05/05 V1.0