Platinum Resistance Temperature Detector SMD 0603 (V) The PRTD SMD 0603 is designed for automatic mounting in large volume applications on printed circuit boards where long time stability, interchangeability combined with low costs are important. Nominal Resistance R0 1000 Ohm at 0C Tolerance DIN EN 60751 1996-07 Class 2B Class B Tolerance DIN EN 60751 2009-05 F 0.6 F 0.3 Order Number 32 207 637 32 207 638 Specification DIN EN 60751 Tolerance Class B (R0: 0.12%) Class 2B (R0: 0.24%) Temperature range -50C to +150C (Application temperatures of +150C are only possible with the use of expansion-matched circuit board material; up to +130C with circu it board material not matched for expansion) Temperature coefficient TCR = 3850 ppm/K Soldering connection End-termination galvanic tin plated with Ni- barrier layer Long term stability max R0-Drift 0,06% after 250h with 130C Environmental conditions unhoused for dry environments only Insulation resistance > 100 M at 20C; > 2 M at 150C (glass cover) Measuring current 1000: 0.1 up to 0.3mA (self heating has to be considered) Self heating 0.8 K/mW at 0C Reaction time Flowing water (v= 0.4m/s): Air flow (v= 2m/s): t0.5 < 0.1s t0.9 < 0.25s t0.5 < 2.5s t0.9 < 8 s Processing instructions face up-mounting: reflow soldering or wave soldering, e. g. double wave < 8s / 235C Storage life Min. 9 months (in dry environment) Packaging Face-up" in blister reel, 4000 pcs Note Other tolerances, values of resistance are available on request. Please have a look for the Information about the tested soldering profile on the next page We reserve the right to make alterations and technical data printed. All technical data serves as a guideline and does not guarantee particular properties to any products. Heraeus Sensor Technology USA 1901 Route 130 North Brunswick, NJ 08902 Phone 732-940-4400 Fax 732-940-4445 Email info.hst-us@heraeus.com http://heraeus-sensor-technology-us.com Name of document: 30910036 Index C Status: 03/2013 Platinum Resistance Temperature Detector SMD 0603 (V) Solderability test of SMD type sensor elements Assembly conditions Layout of PCB: Tested PCB surfaces: Solder Paste: Benchmarker II 150m (material FR4 35m Cu, size 190.5 x 127 x 1.5mm) chem. Ag, Cu OSP, NiAu, chem. Sn F640 SA30C5-89 M30 (material SnAgCu 96.5/3.0/0.5) Tested elements Pt 1000 SMD- V 0603 Pt 1000 SMD- V 0805 Pt 1000 SMD- V 1206 Solder conditions Profiles: Atmosphere: High and Low Nitrogen and Air 1 Mid 2 Mass 3 Mix 1 Mid: Mass: 3 Mix: 2 Peak (max. temperature) High Low 237 C 245 C 231 C 238 C 238 C 248 C time above 217 C in s High Low 60 92 49 68 65 103 Position of temperature sensor in the middle of the PCB Position of temperature sensor at a big mass area on the PCB Position of temperature sensors on right and left side on the PCB Profile High: complete processing time 520 s Profile Low : complete processing time 280 s Result All tested samples showed a sufficient wetting under the described profiles High and Low, based on a visual soldering point inspection. All given data should not be construed as guaranteeing specific properties of the product or its suitability for a specific particular application. The data are an extract from a test report with status from July 2010. We reserve the right to make alterations and technical data printed. All technical data serves as a guideline and does not guarantee particular properties to any products. Heraeus Sensor Technology USA 1901 Route 130 North Brunswick, NJ 08902 Phone 732-940-4400 Fax 732-940-4445 Email info.hst-us@heraeus.com http://heraeus-sensor-technology-us.com Name of document: 30910036 Index C Status: 03/2013 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Heraeus: 32207637 32207638