CPC1014N 60V, 400mA Normally-Open Single-Pole 4-Pin SOP Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) LED Current to operate Rating 60 400 2 2 Units VP mArms / mADC mA Features * Designed for use in security systems complying with EN50130-4 * 1500Vrms Input/Output Isolation * Small 4-Pin SOP Package * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Immune to radiated EM fields * Wave Solderable * Tape & Reel Version Available * Flammability Rating UL 94 V-0 Applications * Security * Passive Infrared Detectors (PIR) * Data Signalling * Sensor Circuitry * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Aerospace * Industrial Controls Description The CPC1014N is a miniature single-pole, normally-open (1-Form-A) solid state relay in a 4-pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation. The super efficient MOSFET switches and photovoltaic die use IXYS Integrated Circuits Division's patented OptoMOS architecture. The optically coupled output is controlled by a highly efficient infrared LED. IXYS Integrated Circuits Division's state of the art, double-molded vertical construction packaging makes the CPC1014N one of the world's smallest relays. It offers board space savings over the competitor's larger 4-pin SOP relay. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1172007 * EN/IEC 60950-1 Certified Component: Certificate B 13 12 82667 003 Ordering Information Part # CPC1014N CPC1014NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Pin Configuration + Control - Control 1 4 Load 3 2 Load Switching Characteristics of Normally-Open Devices Form-A IF 90% 10% ILOAD ton DS-CPC1014N-R05 www.ixysic.com toff 1 INTEGRATED CIRCUITS DIVISION CPC1014N Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings 60 5 50 1 70 400 1500 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms C C Typical values are characteristic of the device at +25C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. Derate linearly 1.33 mW / C. Derate output power linearly 3.33 mW / C. Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate 3 Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output 1 2 3 2 Conditions Symbol Min Typ Max Units IF=2mA t <10ms IL=400mA VL=60VP IL ILPK RON ILEAK - - 400 1 2 1 mArms / mADC AP IF=0mA, VL=50V, f=1MHz ton toff COUT - 0.47 0.22 25 2 1 - IL=400mA IF=5mA VR=5V IF IF VF IR 0.1 0.9 - 0.25 0.2 1.2 - 2 1.4 10 mA mA V A VIO=0V, f=1MHz CIO - 1 - pF IF=5mA, VL=10V A ms pF Load current derates linearly from 400mA @ 25oC to 200mA @85oC. Measurement taken within 1 second of on-time. For applications requiring high temperature operation (greater than 60oC) a minimum LED drive current of 4mA is recommended. www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION CPC1014N PERFORMANCE DATA* 15 10 5 15 10 5 20 15 10 5 1.255 1.260 1.265 1.270 LED Forward Voltage (V) Typical IF for Switch Operation (N=50, IL=400mA) 25 0 0.35 1.275 Device Count (N) 15 10 5 0.45 0.50 0.55 0.60 Turn-On Time (ms) 0.65 0.55 Typical IF for Switch Dropout (N=50, IL=400mA) 25 20 0.40 20 15 10 5 0 0 0.16 0.18 0.20 0.22 0.24 LED Current (mA) 0.26 0.65 0.75 0.85 0.95 Turn-Off Time (ms) 1.05 Typical On-Resistance Distribution (N=50, IF=1mA, IL=400mA) 25 Device Count (N) 1.250 Device Count (N) 25 20 0 0 Typical Turn-Off Time (N=50, IF=5mA, IL=100mA) 30 Device Count (N) 20 Typical Turn-On Time (N=50, IF=5mA, IL=100mA) 25 Device Count (N) Device Count (N) 25 Typical LED Forward Voltage Drop (N=50, IF=5mA) 20 15 10 5 0 0.16 0.28 0.18 0.20 0.22 0.24 LED Current (mA) 0.26 0.505 0.510 0.515 0.520 0.525 0.530 0.535 On-Resistance (:) Typical Blocking Voltage Distribution (N=50) 35 Device Count (N) 30 25 20 15 10 5 0 63.5 IF=50mA 1.5 Turn-On Time (ms) LED Forward Voltage (V) 1.6 IF=20mA 1.4 1.3 1.2 1.1 1.0 -40 IF=10mA IF=5mA IF=2mA -20 0 20 40 Time 60 80 100 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 64.5 65.0 65.5 66.0 Blocking Voltage (VP) 66.5 Turn-On Time vs. LED Forward Current (IL=80mA) 0.7 Turn-Off Time vs. LED Forward Current (IL=80mA) 0.6 Turn-Off Time (ms) Typical LED Forward Voltage Drop vs. Temperature 64.0 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 *Unless otherwise noted, data presented in these graphs is typical of device operation at 25C. For guaranteed parameters not indicated in the written specifications, please contact our application department. R05 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1014N IF=10mA LED Current (mA) 0.36 -20 0 20 40 60 80 100 IF=10mA -20 0 20 40 60 80 Steady State 0.6 0.5 0.4 0.3 100 -20 -40 0 20 40 60 80 100 Temperature (C) Typical IF for Switch Operation vs. Temperature (IL=200mA) Typical IF for Switch Dropout vs. Temperature (IL=200mA) Typical Load Current vs. Load Voltage (IF=2mA) 0.36 0.24 0.20 0.32 0.28 0.24 0.20 0.16 -20 0 20 40 60 Temperature (C) 80 100 -40 Blocking Voltage (VP) 500 400 300 200 100 -20 0 20 40 60 Temperature (C) 80 100 72 0.016 70 0.014 68 0.012 66 64 62 0 20 40 60 Temperature (C) Output Capacitance (pF) 200 80 100 -0.1 0.0 0.1 Load Voltage (V) 0.2 0.3 Typical Leakage vs. Temperature Measured Across Pins 3&4 (VL=60V) 0.010 0.008 0.006 0.002 -40 -20 0 20 40 60 80 100 0 -40 -20 Temperature (C) Output Capacitance vs. Load Voltage (IF=0mA, f=1MHz) 175 0 20 40 60 Temperature (C) 80 100 Energy Rating Curve (IF=2mA) 1100 1000 900 800 700 600 500 400 300 200 100 0 10Ps 100Ps 1ms 10ms 100ms Time Load Current (mA) -20 -0.2 0.004 60 58 0 500 400 300 200 100 0 -100 -200 -300 -400 -500 -0.3 Typical Blocking Voltage vs. Temperature Maximum Load Current vs. Temperature (IF=2mA) Load Current (mA) IF=5mA IF=10mA 0.7 Temperature (C) 0.28 -40 IF=5mA Temperature (C) 0.32 0.16 -40 Typical On-Resistance vs. Temperature (IL=200mA) 0.8 Load Current (mA) -40 0.9 On-Resistance (:) IF=5mA 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 -40 Turn-Off Time vs. Temperature (IL=80mA) Leakage (A) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 Turn-Off Time (ms) Turn-On Time vs. Temperature (IL=80mA) LED Current (mA) Turn-On Time (ms) PERFORMANCE DATA* 150 125 100 75 50 25 0 0 10 20 30 Load Voltage (V) 40 50 1s 10s 100s *Unless otherwise noted, data presented in these graphs is typical of device operation at 25C. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION CPC1014N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Classification CPC1014N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Soldering Profile Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the body temperature of this device may be (TC - 5)C or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of J-STD-020 must be observed. Device Classification Temperature (Tc) Dwell Time (tp) Max Reflow Cycles CPC1014N 260C 30 seconds 3 Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based. R05 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC1014N MECHANICAL DIMENSIONS CPC1014N 4.089 0.203 (0.161 0.008) Recommended PCB Land Pattern 0.200 0.025 (0.008 0.001) 0.60 (0.0217) 6.096 0.102 (0.240 0.004) 3.810 0.076 (0.150 0.003) 0.432 0.127 (0.017 0.005) 5.60 (0.2205) 1.02 0.025 (0.040 0.001) Pin 1 2.54 Typ (0.100 Typ) 1.30 (0.0512) 2.184 Max (0.086 Max) 2.54 (0.10) Pin to package standoff: 0.0637 0.0383 (0.0025 0.0015) 0.762 0.102 (0.030 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) CPC1014NTR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 (0.472) B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossed Carrier Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1014N-R05 (c)Copyright 2016, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 10/25/2016 6