TOPLED long life Enhanced optical Power LED (ThinGaN) Lead (Pb) Free Product - RoHS Compliant LW T6SG OS-IN-2009-009 Besondere Merkmale Features * Gehausetyp: weies P-LCC-2 Gehause, eingefarbter diffuser Silikon - Verguss * Besonderheit des Bauteils: erhohte Lebensdauer durch verbesserten Verguss * Farbort: x = 0,33, y = 0,33 nach CIE 1931 (wei) * typische Farbtemperatur: 5600 K * Farbwiedergabeindex: 80 * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: ThinGaN * optischer Wirkungsgrad: 50 lm/W * Gruppierungsparameter: Lichtstarke, Farbort * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8-mm Gurt mit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * package: white P-LCC-2 package, colored diffused silicone resin * feature of the device: long lifetime due to enhanced resin material * color coordinates: x = 0.33, y = 0.33 acc. to CIE 1931 (white) * typ. color temperature: 5600 K * color reproduction index: 80 * viewing angle: Lambertian Emitter (120) * technology: ThinGaN * optical efficiency: 50 lm/W * grouping parameter: luminous intensity, color coordinates * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 2000/reel, o180 mm or 8000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D Anwendungen * Informationsanzeigen im Auenbereich * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung) * Ersatz von Kleinst-Gluhlampen, Leselampen * Rettungsnotleuchten * Signal- und Symbolleuchten * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) Applications * outdoor displays * backlighting (LCD, switches, keys, displays, illuminated advertising) * substitution of micro incandescent lamps, reading lamps * emergency lighting * signal and symbol luminaire * marker lights (e.g. steps, exit ways, etc.) 2009-04-15 1 LW T6SG Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 18 Lichtstrom2) Seite 18 Bestellnummer Type Color of Emission Luminous Intensity1) page 18 Luminous Flux2) page 18 IF = 20 mA IV (mcd) IF = 20 mA V (mlm) 710 ...1400 900 ...2240 3150 (typ.) 4700 (typ.) LW T6SG-V1AA-JKPL LW T6SG-V2BA-JKPL white Ordering Code Q65110A8981 Q65110A8982 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 7 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LW T6SG-V1AA-JKPL bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen V1, V2 oder AA enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Farbortgruppe geliefert. Z.B.: LW T6SG-V1AA-JKPL bedeutet, dass auf dem Gurt nur eine der Farbortgruppen -JK bis -PL enthalten ist (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Farbortgruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 7 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LW T6SG-V1AA-JKPL means that only one group V1, V2 or AA will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where chromaticity coordinate groups are measured and binned, single chromaticity coordinate groups will be shipped on any one reel. E.g. LW T6SG-V1AA-JKPL means that only 1 chromaticity coordinate group -JK to -PL will be shippable (see page 5 for explanation). In order to ensure availability, single chromaticity coordinate groups will not be orderable . 2009-04-15 2 LW T6SG Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top - 40 ... + 110 C Lagertemperatur Storage temperature range Tstg - 40 ... + 110 C Sperrschichttemperatur Junction temperature Tj + 125 C IF 50 5 mA mA mA Durchlassstrom Forward current (TA=25C) (min.) IF Stostrom Surge current t 10 s, D = 0.005, TA=25C IFM 300 Sperrspannung3) Seite 18 Reverse voltage3) page 18 (TA=25C) VR not designed for V reverse operation Leistungsaufnahme Power consumption (TA=25C) Ptot 185 mW Rth JA 340 K/W Rth JS 180 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 18 Junction/ambient4) page 18 Sperrschicht/Lotpad Junction/solder point 2009-04-15 3 LW T6SG Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Farbkoordinate x nach CIE 19315) Seite 18 (typ.) 5) page 18 Chromaticity coordinate x acc. to CIE 1931 IF = 20 mA x 0.33* - Farbkoordinate y nach CIE 19315) Seite 18 (typ.) 5) page 18 Chromaticity coordinate y acc. to CIE 1931 IF = 20 mA y 0.33* - Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 Grad deg. Durchlassspannung6) Seite 18 Forward voltage6) page 18 IF = 20 mA (min.) (typ.) (max.) VF VF VF 2.9 3.2 3.7 V V V Sperrstrom Reverse current VR = 5 V (typ.) (max.) IR IR not designed for A reverse operation A Temperaturkoeffizient von x Temperature coefficient of x IF = 20 mA; -10C T 100C (typ.) TCx -0.2 10-3/K Temperaturkoeffizient von y Temperature coefficient of y IF = 20 mA; -10C T 100C (typ.) TCy -0.2 10-3/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) opt 50 lm/W * Einzelgruppen siehe Seite 5 Individual groups on page 5 2009-04-15 4 LW T6SG Farbortgruppen5) Seite 17 Chromaticity Coordinate Groups5) page 170.41 Cy 0.37 OL 0.35 540 510 NL 550 560 0.6 ML 0.31 LL MK 570 500 E 0.3 490 0.2 JL 0.27 480 470 460 450 0.1 0 NK LK KL 0.29 KK JK 0.25 0.23 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Cx 0.21 0.25 0.19 0.29 0.4 580 590 600 610 620 630 0.27 0.5 OK + 0.33 0.33 0.7 PK 0.37 Cy 0.8 0 PL 530 0.35 520 0.31 0.9 0.39 Cx OHL04145 Group JK JL KK KL 2009-04-15 Cx Cy Group Cx Cy 0,296 0,259 NK 0,3288 0,3081 0,291 0,268 0,3288 0,3282 0,3005 0,2825 0,3386 0,3426 0,3045 0,2715 0,3386 0,3235 0,291 0,268 0,3288 0,3282 0,285 0,279 0,3288 0,3453 0,296 0,2955 0,3386 0,3591 0,3005 0,2825 0,3386 0,3426 0,3045 0,2715 0,3386 0,3235 0,3005 0,2825 0,3386 0,3426 0,31 0,297 0,3484 0,3571 0,313 0,284 0,3484 0,3388 0,3005 0,2825 0,3386 0,3426 0,296 0,2955 0,3386 0,3591 0,307 0,312 0,3484 0,373 0,31 0,297 0,3484 0,3571 NL OK OL 5 LW T6SG Group LK LL MK ML 2009-04-15 Cx Cy 0,31 0,297 0,3197 Group Cx Cy 0,3484 0,3388 0,3131 0,3484 0,3571 0,3205 0,2956 0,3582 0,3715 0,313 0,284 0,3582 0,3542 0,307 0,312 0,3484 0,3571 0,3189 0,3302 0,3484 0,373 0,3197 0,3131 0,3582 0,3792 0,31 0,297 0,3582 0,3715 0,3197 0,3131 0,3288 0,3282 0,3288 0,3081 0,3205 0,2956 0,3189 0,3302 0,3288 0,3452 0,3288 0,3282 0,3197 0,3131 PK PL 6 LW T6SG Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group Lichtstarke1) Seite 18 Luminous Intensity1) page 18 IV (mcd) V1 V2 AA AB BA 710 ... 900 900 ... 1120 1120 ... 1400 1400 ... 1800 1800 ... 2240 Lichtstrom2) Seite 18 Luminous Flux2) page 18 V (mlm) 2400 3000 3700 4800 6060 (typ.) (typ.) (typ.) (typ.) (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe, die aus nur 3 bzw. 4 Helligkeitsgruppen besteht. Einzelne Helligkeitsgruppen konnen nicht bestellt werden. Note: The standard shipping format for serial types includes a familiy group of 3 or 4 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: V2-JL Example: V2-JL Helligkeitsgruppe Brightness Group Farbortgruppe Chromaticity Coordinate Group V2 JL Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2009-04-15 7 LW T6SG Relative spektrale Emission2) Seite 18 Relative Spectral Emission2) page 18 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 20 mA OHL01461 100 % I rel 80 V 60 40 20 0 400 450 500 550 600 650 700 nm 750 Abstrahlcharakteristik2) Seite 18 Radiation Characteristic2) page 18 Irel = f (); TA = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2009-04-15 0.8 0.6 0.4 0 20 8 40 60 80 100 120 LW T6SG Durchlassstrom2) Seite 18 Forward Current2) page 18 IF = f (VF); TA = 25 C Relative Lichtstarke2) 7) Seite 18 Relative Luminous Intensity2) 7) page 18 IV/IV(20 mA) = f (IF); TA = 25 C OHL02359 10 2 IV I V (20 mA) mA IF 5 10 1 10 0 5 5 10 0 2.5 3 3.5 4 10 -1 0 10 4.5 V 5 Relative Farbortverschiebung2) Seite 18 Relative Chromaticity Coordinate Shift2) page 18 x, y = f (IF); TA = 25 C OHL02469 0.015 Cx, Cy 0.005 0 Cx -0.005 Cy -0.010 -0.015 -0.020 0 20 40 60 5 10 1 mA 10 2 IF VF 80 mA 100 IF 2009-04-15 OHL02386 10 1 9 LW T6SG Relative Vorwartsspannung2) Seite 18 Relative Forward Voltage2) page 18 VF = VF - VF(25 C) = f (Tj); IF = 20 mA VF Relative Lichtstarke2) Seite 18 Relative Luminous Intensity2) page 18 IV/IV(25 C) = f (Tj); IF = 20 mA OHL02397 0.4 V IV I V (25 C) 0.3 0.2 1.0 0.1 0.8 0 0.6 -0.1 0.4 -0.2 0.2 -0.3 -60 -40 -20 0 20 40 60 0 -60 -40 -20 0 C 100 20 40 60 C 100 Tj Tj 2009-04-15 OHL02725 1.4 10 LW T6SG Angestrebte mittlere Lebensdauer2) Seite 18 fur mittlere Helligkeitsgruppe Target median Lifetime2) page 18 for median Brightness Group Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f ( T) IF OHL01354 60 mA Bedingungen mittlere Lebensdauer Conditions median Lifetime IF = 25 mA 50'000 50 40 TA = 25C TA TS IF = 25 mA TA = 85C 30 10'000 Einheit Unit Betriebsstunden operating hours Betriebsstunden operating hours 20 10 TA temp. ambient TS temp. solder point 0 0 20 40 60 80 100 C 120 T Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C 0.35 IF A 0.25 0.20 0.15 OHL01581 t D = TP 0.35 IF A tP IF T D= t D = TP IF T 0.25 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 D= 0.20 0.15 0.10 0.10 0.05 0.05 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2009-04-15 OHL01582 tP 11 LW T6SG Mazeichnung8) Seite 18 Package Outlines8) page 18 Kathodenkennung: Cathode mark: Gewicht / Approx. weight: abgeschragte Ecke bevelled edge 35 mg Gurtung / Polaritat und Lage8) Seite 18 Verpackungseinheit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Method of Taping / Polarity and Orientation8) page 18 Packing unit 2000/reel, o180 mm or 8000/reel, o330 mm 2.9 (0.114) 4 (0.157) Anm.: Das Gehause ist fur Ultraschallreinigung nicht geeignet Note: Package not suitable for ultra sonic cleaning 2009-04-15 12 8 (0.315) Cathode/Collector Marking 1.75 (0.069) 2 (0.079) 3.5 (0.138) 4 (0.157) 3.6 (0.142) 1.5 (0.059) OHAY3602 LW T6SG Empfohlenes Lotpaddesign8) 9) Seite 18 Recommended Solder Pad8) 9) page 18 Reflow Loten Reflow Soldering 2.6 (0.102) 4.5 (0.177) 1.5 (0.059) 1.5 (0.059) 4.5 (0.177) 2.6 (0.102) Padgeometrie fur verbesserte Warmeableitung Lotstopplack Solder resist Paddesign for improved heat dissipation Cu-Flache > 16 mm 2 Cu-area > 16 mm 2 OHLPY970 Empfohlenes Lotpaddesign verwendbar fur TOPLED und Power TOPLED Reflow Loten8) Seite 18 Recommended Solder Pad useable for TOPLED and Power TOPLED Reflow Soldering8) page 18 Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Padgeometrie fur verbesserte Warmeableitung 3.3 (0.130) Paddesign for improved heat dissipation 3.3 (0.130) Anode 2.3 (0.091) 11.1 (0.437) 1.5 (0.059) 1.1 (0.043) 3.7 (0.146) 0.8 (0.031) 0.7 (0.028) Kathode/ Cathode Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Lotstoplack Solder resist 2009-04-15 13 Cu Flache / <_ 16 mm 2 per pad Cu-area OHLPY440 LW T6SG Lotbedingungen Soldering Conditions Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 (nach J-STD-020B) (acc. to J-STD-020B) 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2009-04-15 14 s 250 LW T6SG Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: Bar Code (1T) LOT NO: Lot Number RoHS Compliant ML Temp ST 2 260 C RT m pl (6P) BATCH NO: Batch Number e Semiconductors (9D) D/C: Date Code Sa Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel Additional TEXT R077 DEMY PACKVAR: Packing Type (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 2009-04-15 15 LW T6SG Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs nta d ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co is UR ce 24 6 da e y MI 40 be tim h C e ThISTSE l pro < tor tim or ). 23 tim e at t wilntC or l wit fac MO Flo tim TO s at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da ure ba ed low ba Le ve mo % ba e al d ure Le ist en ref e e 10 tim ure se for ist ale op se for > Mo , se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in Flo RH g, r-p bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo O S R A M N TIO U A C Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials P -1 +Q -1 D/ C: (9 D) 20 00 (Q )Q TY : R ic S NO : O em S BA TC H (6 P) LO T (1 T) NO : (X ) PR OD 5 14 2 110 0 M DE -1 18 (G ) GR OU P: P -1 +Q R u L lt S iT Y O T67 P L 6 8 01 C: 99 D/ TY : O SR AM 20 00 21 D) 00 (9 21 : 34 )Q (Q ic 5 S NO O 12 H em H S TC (X ) PR OD NO : (1 T) 11 00 LO T 14 2 NO (6 P) : 12 BA 3G R A on M du O p ct to or s 44 M 2100 Y E Bi D Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: MO TO OP Muster 01 44 8 2199 A on M du O p ct to or s . RH % /60 C R 18 T6 P 76 LE . H) (R e 3G H 12 34 y dit mi ag NO : 12 nk, bla cod bar d GR OU P: M ul LS ti Y TO el see lab e If hu ive _ < s ur s ). ur s Ho de ur s Ho co 72 Ho ur te 48 e Ho 24 6 da e tim e th tim or ). 23 tim e at t wi ntC or l wi fac Flo tim s at or e. ca at Flo tha ale el or ur nth nti Flo uiv if: read es ed l 4 5 Flo lab mo ide eq low g, l oc ve vic is be or de 24 tin en l 5a6 pr ve Le de e te co , w, g: ve l un wh e Le ke r se da ur e ba ed flo Le ve mo % ba e ba al d ur e Le ist en re e 10 e tim ur e se for ist ale op se for > , Mo se ist ur is or . , is ha 33 se Mo nk be ist nk rd g -0 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. wi 10 ba tor J-S thi va p. elf Ye ar ks s _ < me 1 Ye ee ur d, C ire icat Sh ter w, tem ted at > 1 W Ho un Af flody qu Indno ire DE 1. e 4 8 re ed re y is qu JE 2. bo e Mo or tim dit 16 re : C/ e es 2b a) St tim or mi ed or g is IP tim e vic b) or Hu Flo en tim or De 2a kin ce te Flo a) op or 3. b) ba en Flo da e fer l 1 2 Flo If al re tim ve l 4. se d l 2a3 ve Le g an ve l e Le Ba te ur e Le ve ur e Le ist Da ur e ist Mo ist ur Mo ist Mo Mo (G ) Muster L VE LE re lat ra ck re 30 N s IVE RS inf pa % k ainIT TO of to 90 ea d ntNSUC < ns (p TIO or d , cteg itio U g coSEND an bje C sin nd 5 C su es CO Ais baRE co y 40 be oc TU MI CThIS C < tor ll pr SE DE MY Barcode label D Bi Bin1 Bi n2 : Pn3 : Q- 1ML : 1- 20 20 2 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label Packing Sealing label 2009-04-15 16 OHA02044 LW T6SG Revision History: 2009-04-15 Previous Version: 2007-10-19 Page Subjects (changes since last revision) Date of change 1, 13 Jedec Level changed acc. to OS-IN-2006-029 2006-10-16 3, 10 Forward current increased; Max. Permissible Forward Current changed 2007-07-16 3, 10 Surge current increased; Permissible Pulse Handling Capability changed 2007-07-16 2, 6 ordering code added 2007-07-27 9 OS-IN-2007-021 2007-10-19 1, 11 OS-IN-2007-022 2007-10-19 all OS-IN-2009-009 2009-04-15 Patent List Patent No. US 6 066 861 US 6 277 301 US 6 245 259 US 6 576 930 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components10) page 18 may only be used in life-support devices or systems11) page 18 with the express written approval of OSRAM OS. 2009-04-15 17 LW T6SG Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 4) RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm 2 je Pad) 5) Farbortgruppen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 0,01 ermittelt. 6) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden 8) Mae werden wie folgt angegeben: mm (inch) 9) Gehause fur Wellenloten (TTW) geeignet. 10) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 11) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) 3) 4) 5) 6) 2009-04-15 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch) Package suitable for TTW-soldering. A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) 11) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 18 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 16 mm 2 per pad) Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of 0.01. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.