Scotch®
Industrial Box Sealing Tape
371
Product Description Scotch®Box Sealing Tape 371 is an industrial packaging tape used for box sealing,
splicing, recouperage and other packaging applications. This product has a
conformable backing and a consistent pressure sensitive hot melt synthetic rubber
adhesive system.
Typical Physical
Properties
Technical Data January, 2011
Note: The follo wing technical information and data should be considered r epresentativ e
or typical only, and should not be used for specification purposes.
ASTM Test Method
Adhesion to Steel: 45 oz./in. width (49.2 N/100 mm width) D-3330
Tensile Strength:
Machine Direction: 22 lbs./in. width (385 N/100 mm width) D-3759
Cross Direction: 44 lbs./in. width (771 N/100 mm width) D-3759
Elongation at Break: 160% D-3759
Tape Thickness: 1.9 mil (0.048 mm) D-3652
Holding Power: 3,500+ minutes D-3654
Construction Backing Adhesive Colors
Biaxially oriented Pressure sensitive hot Blue, clear, green, orange ,
polyprop ylene melt rubber-resin red, tan, yello w, and white
3
Features • Adheres instantly to a v ariety of surfaces.
• Edge tear and split resistance.
• Good adhesion to fiberboard.
• Roll to roll consistency increases productivity for improved unit costs.
• Meets FDA requirements for indirect food contact.
Standard Widths: 36 mm, 42 mm, 48 mm, 72 mm
Core Size (ID): 3 in.
Lengths: 50 m, 100 m, 914 m, 1500 m, 1828 m
Available Sizes
Scotch®Industrial Box Sealing Tape
371
A pplication Techniques An extensive line of application equipment including hand held manual dispensers
and semi-automatic and fully automatic equipment is available. Application of
Scotch®Box Sealing Tape 371 is most easily accomplished at room temperature.
At colder temperatures, approaching 32°F (0°C), the adhesive becomes more firm.
Once applied, Scotch®Tape 371 performs well throughout the normal temperature
ranges typically encountered by packaged products in shipping and storage
environments.
Storage Conditions Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40 to 50% relative
humidity are recommended.
Scotch is a registered trademark of 3M.
Printed in U.S.A.
©3M 2011 70071002748 (1/11)
Recycled Paper
40% pre-consumer
10% post-consumer
3
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (Fax)
www.3M.com/industrial
The technical information, recommendations and other statements contained in this document are
based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Technical Information
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s
option, replacement of the 3M product or refund of the purchase price.
Warranty,
Limited Remedy,
and Disclaimer
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect
the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
Product Use
Shelf Life To obtain best performance, use this product within 18 months from date of
manufacture.
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
Limitation of Liability
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001:2008 standards.
ISO 9001:2008
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
3M:
371-Clear-48mmx100m 371-Tan-48mmx50m 371-Tan-48mmx100m 371-White-48mmx100m 371-Blue-48mmx100m
371-Green-48mmx100m 371-Red-48mmx100m 371-Yellow-48mmx100m 371-Clear-72mmx100m 371-Clear-
72mmx50m 371-Tan-72mmx100m 371-Tan-72mmx50m 371-48x1500CLR 371-48x914CLR 371-CLR-48MMX50M
