Model IMS-5SWD-65 Vishay Dale Inductors Commercial, Miniature, Molded, Shielded FEATURES * Ultra-reliable molded shielded miniature RF inductor. * Epoxy molded envelope and shielding. * Offers reliability, electrical performance and minimum coupling in high density packaging. ELECTRICAL SPECIFICATIONS DENSITY SPECIFICATIONS Inductance Range: .1H to 100,000H. Inductance Tolerance: 10%. Dielectric Strength: 700V RMS at sea level. Operating Temperature: - 55C to + 125C. Self-Resonant Frequency: Measured per MIL-C-15305 (latest revision). Q: Measured on a Q-Meter. Maximum Current: Based on temperature rise not to exceed 35C at + 90C ambient. Weight: .75 gram maximum. Shielding: At the test frequency, two units assembled side by side exhibit less than 3% coupling. ENVIRONMENTAL SPECIFICATIONS Moisture: Per MIL-STD-202, Method 106. Vibration: High frequency, 10Hz to 2000Hz @ 20 g 10% maximum for 12 logarithmic swings each of 20 minute duration repeated for each of three mutually perpendicular planes. MECHANICAL SPECIFICATIONS Terminal Strength: Meets 5 pound pull test; three 360 rotations in alternate directions when tested per MIL-C-15305 (latest revision). Shock: 100 g, 6 ms. DIMENSIONAL CONFIGURATIONS [Numbers in brackets indicate millimeters] .157 .010 [3.99 .254] 1.438 .188 [36.52 4.78] #22 .025 .002 [.635 .051] TCW .395 .020 [10.03 .508] STANDARD ELECTRICAL SPECIFICATIONS TEST FREQ. SELF-RESONANT FREQ. MIN. DCR MAX. (MHz) (MHz) (Ohms) (mA) (mA) 25 250 .025 2900 2900 51 25 250 .034 2800 2800 51 25 250 .037 2750 2750 10% 50 25 250 .047 2200 2200 .22 10% 49 25 250 .067 1700 1700 IMS-5SWD-65 .27 10% 47 25 250 .11 1500 1500 IMS-5SWD-65 .33 10% 46 25 250 .13 1300 1300 IMS-5SWD-65 .39 10% 44 25 250 .18 1100 1100 IMS-5SWD-65 .47 10% 44 25 235 .25 1000 1000 IMS-5SWD-65 .56 10% 43 25 210 .33 900 900 IMS-5SWD- 65 .68 10% 42 25 190 .45 750 750 IMS-5SWD-65 .82 10% 40 25 180 .59 600 600 TOL. Q MIN. IMS-5SWD-65 .10 10% 50 IMS-5SWD-65 .12 10% IMS-5SWD-65 .15 10% IMS-5SWD-65 .18 IMS-5SWD-65 RATED DC CURRENT INCREMENTAL* CURRENT PHENOLIC CORE IND. (H) MODEL *Incremental Current: The DC current required to cause a 5% reduction in the nominal inductance value. www.vishay.com 100 Document Number 34050 Revision 30-Apr-99 Model IMS-5SWD-65 Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS SELF-RESONANT FREQ. MIN. DCR MAX. RATED DC CURRENT INCREMENTAL* CURRENT (MHz) (MHz) (Ohms) (mA) (mA) 47 25 140 .07 1900 1900 46 7.9 130 .093 1600 1600 10% 45 7.9 115 .12 1300 1300 1.8 10% 43 7.9 105 .14 1200 1200 IMS-5SWD-65 2.2 10% 45 7.9 100 .19 1100 1100 IMS-5SWD-65 2.7 10% 46 7.9 92 .28 950 950 IMS-5SWD-65 3.3 10% 44 7.9 85 .35 800 800 IMS-5SWD-65 3.9 10% 44 7.9 75 .40 750 750 IMS-5SWD-65 4.7 10% 44 7.9 70 .55 650 650 IMS-5SWD-65 5.6 10% 47 7.9 65 .72 550 550 IMS-5SWD-65 6.8 10% 50 7.9 55 1.02 500 500 IMS-5SWD-65 8.2 10% 50 7.9 50 1.32 475 475 IMS-5SWD-65 10 10% 49 7.9 46 1.62 450 450 IMS-5SWD-65 12 10% 55 2.5 44 2.0 400 400 IMS-5SWD-65 15 10% 44 2.5 49 .80 620 250 IMS-5SWD-65 18 10% 45 2.5 45 .89 610 235 IMS-5SWD-65 22 10% 46 2.5 41 .96 600 220 IMS-5SWD-65 27 10% 49 2.5 38 1.19 500 200 IMS-5SWD-65 33 10% 45 2.5 34 1.37 490 190 IMS-5SWD-65 39 10% 53 2.5 29 1.93 410 180 IMS-5SWD-65 47 10% 52 2.5 27 2.11 400 175 IMS-5SWD-65 56 10% 49 2.5 25 2.23 380 160 IMS-5SWD-65 68 10% 51 2.5 21 2.70 370 150 IMS-5SWD-65 82 10% 45 2.5 10.5 2.44 360 140 IMS-5SWD-65 100 10% 52 2.5 10 3.12 325 120 IMS-5SWD-65 120 10% 57 .79 9.7 3.6 290 95 IMS-5SWD-65 150 10% 56 .79 8.5 4.1 275 90 IMS-5SWD-65 180 10% 60 .79 8.0 4.4 260 85 IMS-5SWD-65 220 10% 58 .79 7.5 5.0 250 80 IMS-5SWD-65 270 10% 60 .79 7.0 5.8 240 70 IMS-5SWD-65 330 10% 54 .79 6.5 6.4 225 65 IMS-5SWD-65 390 10% 67 .79 6.2 7.4 200 60 IMS-5SWD-65 470 10% 60 .79 5.7 9.5 180 58 IMS-5SWD-65 560 10% 60 .79 4.7 10.5 174 55 IMS-5SWD-65 680 10% 60 .79 4.5 11.8 168 50 IMS-5SWD-65 820 10% 57 .79 4.2 13.0 152 45 IMS-5SWD-65 1000 10% 65 .79 3.8 17.5 135 40 IMS-5SWD-65 1200 10% 45 .25 1.5 22.1 115 35 IMS-5SWD-65 1500 10% 49 .25 1.2 26.5 110 33 IMS-5SWD-65 1800 10% 47 .25 1.0 29.9 105 30 IMS-5SWD-65 2200 10% 50 .25 .97 33.8 99 27 IMS-5SWD-65 2700 10% 47 .25 .92 47.3 83 25 IMS-5SWD-65 3300 10% 43 .25 .84 53.0 80 22 IMS-5SWD-65 3900 10% 43 .25 .80 73.8 67 20 IMS-5SWD-65 4700 10% 44 .25 .74 81.6 63 19 IMS-5SWD-65 5600 10% 45 .25 .73 98.9 56 17 IMS-5SWD-65 1.0 10% IMS-5SWD-65 1.2 10% IMS-5SWD-65 1.5 IMS-5SWD-65 MODEL FERRITE CORE TOL. Q MIN. IRON CORE TEST FREQ. IND. (H) *Incremental Current: The DC current required to cause a 5% reduction in the nominal inductance value. PART MARKING -- Color coded per MIL-C-15305 Document Number 34050 Revision 30-Apr-99 HOW TO ORDER IMS-5SWD-65 .47H 10% MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE www.vishay.com 101