Data Sheet ACD-22SW Swivel Clamp Meter New patented rotating head clamp design allows easy viewing of the measurements in tight or inconvenient to reach places. Simply rotate the body of meter to get an unobstructed view of the LCD display. Rich set of features and CAT III 600V safety reading for use in electrical and HVAC applications. n TRMS Measurement n 180 degree rotating head for the perfect display viewing n Advanced VoltTect non-contact voltage detection n Slim jaw design with one hand operation n Measures AC Current up to 400 ACA, AC/DC Voltage up to 600V, Resistance and Capacitance n Audible continuity n Auto and manual ranging respectively for quick checks and No hassle warranty n Backlight No waiting. n Auto power off No shipping charges. n Data hold Our commitment to high-quality products and customer service is demonstrated by our industry exclusive "No Hassle" warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot. n Safety CAT III 600 V precise measurements n Accommodates conductors up to 1.18" (30mm) in diameter n Test leads, battery (installed), Users Manual, Carrying Case and type-K thermocouple are included with the product (note: $500 MSLP limit) Amprobe(R) Test Tools www.Amprobe.com ACD-22SW Swivel Clamp Meter Data Sheet General Specifications Display Polarity Overrange Zero Low battery indication Auto power off Measurement rate Operating Environment Storage Ttemperature Accuracy Temperature Coefficient Altitude Jaw opening capability Power Battery life Dimensions Weight Safety 33/4 digit liquid crystal display (LCD) with a maximum reading of 3999. Automatic, positive implied, negative polarity indication. (OL) or (-OL) is displayed. Automatic. The " " is displayed when the battery voltage drops below the operating level. Approx. 10 minutes. 2 times per second, nominal. 0C to 50C / 32F to 122F at <70% relativehumidity. -20C to 60 / -4F to 140F, 0 to 80% R.H. withbattery removed from meter. Stated accuracy at 74F 8F, <75% relative humidity. 0.1 x (specified accuracy) per F, (32F to 66F, 82F to 122F). 6561.7 Feet (2000m). 30mm conductor. 1.5 volt battery x2, R03/SIZE AAA. 50 hours typical with carbon-zinc. 100 hours typical with alkaline. 240 x 70 x 41mm (9.5 x 2.8 x 1.6 in). Approx. 220g (7.7oz.) including battery. Designed to meet IEC 61010-1 (EN61010-1) and IEC 61010-2-032 (EN61010-2-032), CATIII 600V class II and pollution degree 2 indoor use comply with CE , CSA Electrical Specifications DC Volts Ranges 400mV, 4V, 40V, 400V, 600V Resolution 0.1mV Accuracy (0.5% rdg + 2 dgts) Input Impedance 400mV:>100M; 4V:10M;40V~600V:9.1M Overload Protection 600VDC or AC rms To measure millivolts, use "RANGE " button to manually select 400mV range. AC Volts (50Hz - 500Hz) Ranges 4V, 40V, 400V, 600V Resolution 1mV Accuracy (1.2% rdg + 8 dgts) Crest Factor (1.5% rdg + 8 dgts) on 600V range 3 AC coupled true rms specified from 5% to 100% range Input Impedance 4V:10M;40V~600V:9.1M Overload Protection 600 VDC or AC rms AC Current (50Hz - 60Hz) Ranges 40A , 400A Resolution 0.01A Accuracy (2.0% rdg + 10 dgts) 50 ~ 60Hz Crest Factor 3 AC coupled true rms specified from 5% to 100% range Overload Protection Amprobe(R) Test Tools 400A AC www.Amprobe.com ACD-22SW Swivel Clamp Meter Data Sheet Resistance Ranges 400, 4k, 40k, 400k, 4M, 40M Resolution 0.1 Accuracy (1.0% rdg + 5 dgts) on 400 to 400k ranges (1.5% rdg + 5 dgts) on 4M range (3.0% rdg + 5 dgts) on 40M range Open Circuit Volts -0.45V dc typical, (-1.2Vdc on 400 range) Overload Protection 600VDC or AC rms Diode Test Test Current 0.8mA (approxlmate) Accuracy (3.0% rdg + 3 dgts) Open Circuit Volts 3.0 Vdc typica Overload Protection 600VDC or AC rms Continuity Range 400 Resolution 1 Audible Indication: Less than 25 Response Time 500ms Overload Protection 600VDC or AC rms Non-Contact Voltage Indicator Sense voltage 70V to 600VAC (50Hz ~ 60Hz) beeper chirps and big bright red LED comes on, works when meter dial is on any ranges. AUXILIARY FEATURES Hold Freeze the latest reading on the display. Range Excute manual range mode. Disable Auto Power Off Amprobe(R) Test Tools Set the DMM to off position, press (RANGE) button, and hold the (RANGE) button while turning the rotary knob to the desired range position. Release the button when LCD displays normally. Note "APO" annunciator is missing from the LCD. The Auto Power Off mode is activated with an "APO" symbol indicating on LCD. www.Amprobe.com ACD-22SW Swivel Clamp Meter Data Sheet Included Accessories One pair test leads 1.5V battery x2 (installed) Carrying case TPK01 thermocouple Users Manual Amprobe(R) Test Tools website: www.Amprobe.com email: info@amprobe.com Everett, WA 98203 Tel: 877-AMPROBE Amprobe(R) Test Tools Europe In den Engematten 14 79286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0 (c)2010 Amprobe Test Tools. All rights reserved. 08/2010 ACD-22SW_DS Rev A Amprobe(R) Test Tools www.Amprobe.com