formerly New Product Communication Unit for Open Network Fiber Sensor Guide Book The digital sensor can be connected directly to the 3 types of open network! Other types of analog input sensors can also be connected! Fiber Sensor Guide Book On sale soon Scattered digital sensors can be centrally managed and set through an open network. Applicable Digital Sensor Please contact .......... Digital Fiber Sensor Digital Laser Sensor Digital Pressure Sensor Panasonic Electric Works SUNX Co., Ltd. 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan Telephone: +81-568-33-7211 Facsimile: +81-568-33-2631 Global Sales & Marketing Division Telephone: +81-568-33-7861 Facsimile: +81-568-33-8591 panasonic-electric-works.net/sunx All Rights Reserved No. CE-FIBERGUIDE-7 October, 2011 Specifications are subject to change without notice. Panasonic Electric Works SUNX Co., Ltd. 2011 Printed in Japan 2011.10 www.SunxSensors.com Ramco Innovations (800) 280-6933 www.SunxSensors.com INDEX Fiber Selection Guide Choose by model Choose by shape/application 3 Viewing new models 4 New Product Introduction Tough Fiber Fibers Super Quality 6 8 Threaded Type 10 Cylindrical Type 12 Sleeve 14 Flat Type 16 Small Spot 18 Narrow Beam 19 Wide Beam 20 21 22 Chemical-resistant 23 Heat-resistant 24 Vacuum-resistant 26 Liquid Leak / Liquid Detection 28 Fiber Options Fiber Dimensions 2 30 Thru-beam Type 34 41 42 Others 51 FX-500 series 56 FX-100 series 66 INDEX 76 Earlier Models Comparison Table 80 Ramco Innovations GENERAL TERMS AND CONDITIONS Please read this document carefully with respect to our product warranty policy before using our Panasonic Electric Works SUNX products ("Products"). If you have any questions or comments regarding do's and don'ts of the Products, please consult your local Panasonic Electric Works SUNX authorized dealer for the correct use and application of the Products. 1. PRODUCT MODIFICATION & DISCONTINUANCE: Panasonic Electric Works SUNX expressly reserves the right to modify, including the right to discontinue, any of the Products, prior to their order, from time to time without notice. 2. WARRANTIES: (1) Subject to the exclusions stated in 3 (EXCLUSIONS) herein below, Panasonic Electric Works SUNX warrants the Products to be free of defects in material and workmanship for a period of one (1) year from the date of shipment under normal usage in environments commonly found in manufacturing industry. (2) Any Products found to be defective must be shipped to Panasonic Electric Works SUNX with all shipping costs paid by Purchaser or offered to Panasonic Electric Works SUNX for inspection and examination. Upon examination by Panasonic Electric Works SUNX, Panasonic Electric Works SUNX will, at its sole discretion, repair or replace at no charge, or refund the purchase price of, any Products found to be defective. 3. EXCLUSIONS (1) This warranty does not apply to defects resulting from any cause: (i) which was due to abuse, misuse, mishandling, improper installation, improper interfacing, or improper repair by Purchaser; (ii) which was due to unauthorized modification by Purchaser, in part or in whole, whether in structure, performance or specification; (iii) which was not discoverable by a person with the state-of-the-art scientific and technical knowledge at the time of manufacture; (iv) which was due to an operation or use by Purchaser outside of the limits of operation or environment specified by Panasonic Electric Works SUNX; (v) which was due to Force Majeure; and (vi) which was due to any use or application expressly discouraged by Panasonic Electric Works SUNX in 5 (CAUTIONS FOR SAFE USE) hereunder. (2) This warranty extends only to the first purchaser for application, and is not transferable to any person or entity which purchased from such purchaser for application. (3) The performance data presented in this catalogue is only for guidance and shall not constitute any performance warranty by Panasonic Electric Works SUNX. 4. DISCLAIMERS (1) Panasonic Electric Works SUNX's sole obligation and liability under this warranty is limited to the repair or replacement, or refund of the purchase price, of a defective Product, at Panasonic Electric Works SUNX's option. (2) THE REPAIR, REPLACEMENT, OR REFUND IS THE EXCLUSIVE REMEDY OF THE PURCHASER, AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF PROPRIETARY RIGHTS, ARE HEREBY EXPRESSLY DISCLAIMED. IN NO EVENT SHALL PANASONIC ELECTRIC WORKS SUNX AND ITS AFFILIATED ENTITIES BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCTS, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMANGES RESULTING FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF PROFITS, LOSS OF SAVINGS, THE COST OF PROCUREMENT OF SUBSTITUTED GOODS, SERVICES OR TECHNOLOGIES, OR FOR ANY MATTER ARISING OUT OF OR IN CONNECTION WITH THE USE OR INABILITY TO USE THE PRODUCTS. 5. CAUTIONS FOR SAFE USE (1) The applications shown in this catalogue are only suggestions, and it is Purchaser's sole responsibility to ascertain the fitness and suitability of the Products for any particular application, as well as to abide by Purchaser's applicable local laws and regulations, if any. (2) Never use the Products NOT rated or designated as "SAFETY SENSOR" in any application involving risk to life or property. When such a use is made by Purchaser, such Purchaser shall indemnify and hold harmless Panasonic Electric Works SUNX from any liability or damage whatsoever arising out of or in relation to such use. (3) In incorporating the Products to any equipment, facilities or systems, it is highly recommended to employ fail-safe designs, including but not limited to a redundant design, flame propagation prevention design, and malfunction prevention design so as not to cause any risk of bodily injury, fire accident, or social damage due to any failure of such equipment, facilities or systems. (4) The Products are each intended for use only in environments commonly found in manufacturing industry, and, unless expressly allowed in this catalogue, specification or otherwise, shall not be used in, or incorporated into, any equipment, facilities or systems, such as those: (a) which are used for the protection of human life or body parts; (b) which are used outdoors or in environments subject to any likelihood of chemical contamination or electromagnetic influence; (c) which are likely to be used beyond the limits of operations or environments specified by Panasonic Electric Works SUNX in this catalogue or otherwise; (d) which may cause risk to life or property, such as nuclear energy control equipment, transportation equipment (whether on rail or land, or in air or at sea), and medical equipment; (e) which are operated continuously each day for 24 hours; and (f) which otherwise require a high level of safety performance similar to that required in those equipment, facilities or systems as listed in (a) through (e) above. 6. EXPORT CONTROL LAWS In some jurisdictions, the Products may be subject to local export laws and regulations. If any diversion or re-export is to be made, Purchaser is advised to abide by such local export laws and regulations, if any, at its own responsibility. 7. PURCHASER'S TRASFER OBLIGATIONS If Purchaser resell or deliver the Products to a third party, Purchaser must provide such third party with a copy of this document, all specifications, manuals, catalogs, leaflets and written information of any kind provided to Purchaser by Panasonic Electric Works SUNX or its authorized local representative from time to time regarding the Products. (800) 280-6933 www.SunxSensors.com 2 New product introduction Fiber Ramco Innovations (800) 280-6933 www.SunxSensors.com Fiber Selection Guide Choose by model Thru-beam type Fiber Selection Guide Choose by model Choose by shape/ application new models Fibers Super Quality Threaded Type Cylindrical Type Flat Type Small Spot Narrow Beam Wide Beam Type Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Type Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table Page Model No. FT-140 FT-30 FT-31 FT-31S FT-31W FT-40 FT-42 FT-42S FT-42W FT-43 FT-45X FT-A11 FT-A11W FT-A32 FT-A32W FT-AL05 FT-E13 FT-E23 FT-F93 FT-H13-FM2 FT-H20-J20-S FT-H20-J30-S FT-H20-J50-S FT-H20-M1 FT-H20-VJ50-S FT-H20-VJ80-S FT-H20W-M1 FT-H30-M1V-S FT-H35-M2 FT-H35-M2S6 FT-HL80Y FT-KS40 FT-KV26 FT-KV40 FT-KV40W FT-L80Y FT-R40 FT-R41W FT-R42W FT-S11 FT-S20 FT-S21 FT-S21W FT-S30 FT-S31W FT-S32 FT-V23 FT-V24W FT-V25 FT-V30 FT-V40 FT-V80Y FT-WZ4 FT-WZ7 FT-Z20HBW FT-Z30 FT-Z30E Page Sensing range Dimensions P.10 P.9 P.10 P.15 P.10 P.9 P.10 P.15 P.34 Model No. FT-Z30EW FT-Z30H FT-Z30HW FT-Z30W FT-Z40HBW FT-Z802Y Page Sensing range Dimensions P.39 P.16 P.40 Model No. FR-KZ22E FR-KZ50E FR-KZ50H FR-Z50HW Sensing range Dimensions P.19/P.22 P.41 P.23 P.10 P.20 P.35 Page P.12/P.15 Model No. P.28 P.24 P.36 P.26 P.24 P.23 P.19 P.23 P.37 P.10 P.12 P.9 P.12 P.9 P.12 P.38 P.15 P.12 P.23 P.39 P.16 FD-30 FD-31 FD-31W FD-32G FD-32GX FD-40 FD-41 FD-41S FD-41SW FD-41W FD-42G FD-42GW FD-60 FD-61 FD-61G FD-61S FD-61W FD-62 FD-64X FD-A16 FD-AL11 FD-E13 FD-E23 FD-EG30 FD-EG30S FD-EG31 FD-F4 FD-F41 FD-F41Y FD-F71 FD-F8Y FD-FA93 FD-H13-FM2 FD-H18-L31 FD-H20-21 FD-H20-M1 Page Sensing range Dimensions P.9 P.11 P.11/P.18 P.9 P.11 P.42 P.15 P.11 P.11/P.18 P.9 P.11 P.43 P.15 P.11 P.20 P.44 P.13/P.15 P.11/P.18 P.15 P.11/P.18 P.45 P.28 P.25 P.46 Model No. FD-H25-L43 FD-H25-L45 FD-H30-KZ1V-S FD-H30-L32 FD-H30-L32V-S FD-H35-20S FD-H35-M2 FD-H35-M2S6 FD-HF40Y FD-L10 FD-L11 FD-L12W FD-L20H FD-L21 FD-L21W FD-L22A FD-L23 FD-L30A FD-L31A FD-L32H FD-R60 FD-S21 FD-S30 FD-S31 FD-S32 FD-S32W FD-S33GW FD-V30 FD-V30W FD-V50 FD-WZ4 FD-WZ7 FD-Z20HBW FD-Z40HBW FD-Z50HW Sensing range Dimensions P.25 P.46 P.26 P.25 P.26 P.47 P.25 P.28 P.21 P.11 P.13 P.9 P.48 P.49 P.13 P.15 P.50 P.17 P.19 Ramco Innovations (800) 280-6933 www.SunxSensors.com Fiber Selection Guide 3 New product introduction Choose by quality Choose by shape Super Quality S Threaded Type T Cylindrical Type C The variance of beam axis is # Has a slender shape # Fiber Flat Type # ! shape. $ # # screws. Fiber Selection Guide Choose by model Choose by shape/ application new models Fibers Super Quality P.8 P.10 P.12 P.14 P.16 Threaded Type Cylindrical Type Choose by beam shape Small Spot S ! lens. Narrow Beam " Wide Beam W # a work. Ideal for sensing ! Flat Type Small Spot Narrow Beam Wide Beam Type Type Chemicalresistant Heatresistant P.18 P.19 P.20 P.21 P.22 C Chemical-resistant Heat-resistant Various kinds of liquids resin case * +<= > -76 F 350 C 662 F V Vacuum-resistant Usable in high 300 C 572 F and vacuum Vacuumresistant Liquid Leak / Liquid Detection Fiber Options L Liquid Leak / Liquid Detection L various liquid Fiber Dimensions Thru-beam Type Type Type Others P.23 P.24 P.26 Amplifiers P.28 FX-500 series FX-100 series ! % FX-500 series % FX-100 series & leading edge INDEX ' ' Earlier models comparison table P.56 P.66 4 New product introduction Fiber Ramco Innovations Choose by model Choose by shape/ application new models Fibers Super Quality Threaded Type www.SunxSensors.com Fiber Selection Guide ! | Fiber Selection Guide (800) 280-6933 F Series Name - ^~Z\_ *1 [ { | } { ' % T + D R @ }@ None G S H E HB A Cylindrical Type Flat Type % General-purpose Sleeve Top sensing * Side sensing * * @ ^Z and KZ_ Small Spot Narrow Beam Wide Beam Type Type Chemicalresistant Heatresistant None Vacuumresistant Liquid Leak / Liquid Detection Fiber Options R S KS Fiber Dimensions V Thru-beam Type Type Type KV E Others EG Amplifiers Z FX-500 series FX-100 series KZ A INDEX Earlier models comparison table AL L F Lead No. 3 4 6 14 4 Elbow or square head 6 1 2 3 Narrow beam 4 2 3 Side-view 4 5 4 Narrow beam / Side-view 2 1 ? 2 Coaxial 3 2 3 @ 4 5 2 Narrow beam 5 3 Wide beam 1 1 0 1 2 3 9 { | } { 7 % % M3 M4 M6 M14 M4 M6 o1 mm o1.5 mm o2.5 or o3 mm o3.7 mm o2 mm o2.5 or o3 mm o4 mm o5 mm o4 mm 1.5 x 2 mm Fiber o0.125 mm Fiber o0.25 mm M3 Thickness 2 mm Thickness 3 mm Thickness 3.5 mm Thickness 5.2 mm Thickness 2.2 mm Thickness 5.2 mm # JZ # [= [\ # [[[ # ]] = [= ^%_ [[ J= ^%_ J[ ^%_ ~ Liquid leak None W X Y % General-purpose Sharp bending +! | + Ramco Innovations (800) 280-6933 www.SunxSensors.com 5 6 New product introduction Tough Fiber Fiber Selection Guide Choose by model Ramco Innovations (800) 280-6933 www.SunxSensors.com Tough Fiber Conventional 3 types y ro lled into 1 !! rolled New standard fiber Choose by shape/ application Viewing new models Flexible fiber Fibers Super Quality Threaded Type Cylindrical Type Flexible durability 1 million times Flat Type Small Spot Narrow Beam Wide Beam Type Sharp bending fiber Bending radius R2 ~R1 mm Tough Fiber Break-free Flexible durability 10 million times (Typical) Bending conditions Bending radius: R10 mm Reciprocating bending: 180 More flexible ~R4 Bending radius R2 mm Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions General purpose fiber Bending radius R25mm ed gs are us steel fittin ls. e d o m ll Stainless head of a r e b fi e for th s to RoHS tery nform Clearly co d for secondary bat se u th e g b n re an st C mounting Improved Thru-beam Type Type Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table $ ! transcends common knowledge! It has toughness that can be used in moving parts, toughness that can be bent with precision, +{ $ |# Ramco Innovations (800) 280-6933 www.SunxSensors.com Break-free 7 New product introduction Tough Fiber Flexible durability 10 million times Fiber Selection Guide Choose by model Choose by shape/ application (Typical) Bending conditions Bending radius: R10 mm R0.394 in, Reciprocating bending: 180 Viewing new models Fibers More flexible Ex) FT-31 Super Quality Threaded Type R2 to R4 mm R0.079 to R0.157 in Cylindrical Type Ex) FT-42 Flat Type R R2 mm R0.079 in M3 M4 R4 mm R0.157 in Small Spot R Narrow Beam Wide Beam Type O2.2 mm O0.087 in O1 mm O0.039 in Type Chemicalresistant Heatresistant Vacuumresistant Reduced the time for selecting fiber and registration numbers For Designers rs High-q uality #High-quality in whichever tough fiber you choose! # Easy selection! # Reduced risk of breaking and bending during installation! For Fo Buyers Liquid Leak / Liquid Detection Fiber Options Low P rice #Cost savings! #Reduced registration numbers! # Reduced frequency of maintenance stockpiling and replacement! Fiber Dimensions Thru-beam Type Type Type Others Amplifiers !! FX-500 series FX-100 series ' Previous Previous sharp cores, often resulting in large variations in light intensity. "# # core, achieving uniform light intensity. #Uniform and highly accurate sensing # INDEX Earlier models comparison table 8 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Ramco Innovations (800) 280-6933 www.SunxSensors.com Super Quality $ # # # FX-500 $ # FT-40 Digital management is simple due to small differences in body. * # FX-500 ' # ~ # # Super quality fiber FX-500 series "Stabilized incident light intensities" even in multiple units Flat Type Small Spot Narrow Beam Wide Beam Type Type Chemicalresistant # Heatresistant Liquid Leak / Liquid Detection # [= ' + # Z>' # J> # []= Fiber Options # Expanded temperature range Fiber Dimensions Thru-beam Type = = > = [] >@ Type -55 to +80 C -67 to +176 F Others Integrated high-precision plug Type Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table o2.2 mm o0.087 in! ! 1.2 times Stable emission intensity within 10 % "# Vacuumresistant $ ' + + # ' *, R4 ' # = Bending radius Z] =\ R4 mm R0.157 in 1/6 ' !, Bending durability ['=== 10 million times 10,000 times [= =J\ ' [=> Ramco Innovations (800) 280-6933 9 www.SunxSensors.com New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Thru-beam type (one pair set) ~J M3 ~ " 7RXJK FT-30 12 M4 ~ (mm) 7RXJK FT-40 [] o1.5 7RXJK FT-S20 10 o3 J 15 7RXJK FT-S30 10 Fibers @ (mm) @+ R2 R4 Z R2 R4 ^ ) FX-500 STD == [] HYPR ['J]= ]J[]= STD ['Z== Z HYPR ^"_ J'<== [[JZ STD == [] HYPR ['J]= ]J[]= STD ['Z== Z HYPR ^"_ J'<== [[JZ ?+ " @ + [= J[\= <]= Z]]\[ Z[= Z< ] Z\]J Z'Z== <<[ ['== <<\Z\ ]J= Z=<< [\= = [= J[\= <]= Z]]\[ Z[= Z< ] Z\]J Z'Z== <<[ ['== <<\Z\ ]J= Z=<< [\= = FX-101 } ^? _ $ FX-102 (mm) ^# _ [J] ]J[] =] == [] JZ= [Z]\ = JZ]Z [ []= [= }Z> $< ]] = > [J] ]J[] == [] =] JZ= [Z]\ = JZ]Z ~J ~ " Type [ Type Chemicalresistant ~ 7RXJK FD-40 JJ= [Z\\Z Z]= \J = J[]= Z] =\ J Z 7RXJK FD-60 R4 o3 7RXJK FD-S30 10 STD HYPR ]Z= Z=Z [']]= <[=Z STD [<= <Z\\ HYPR <== ZJ<ZZ Liquid Leak / Liquid Detection ] [Z []] <[=Z \== J]JJ = Z\[J [= ]][Z Z<= [=ZJ< Z= [<]J] \= J]J JJ= [Z\\Z Z]= \J = J[]= Z] =\ Vacuumresistant Fiber Options 14 ~< ^ _ ^"_ FX-101 } ?+ ^? _ $ " FX-500 FX-102 @ ^# _ + STD [<= <Z\\ HYPR <== ZJ<ZZ R2 17 @ (mm) @+ FD-30 M6 Narrow Beam Heatresistant 12 M4 Small Spot Wide Beam 7RXJK M3 Cylindrical Type (mm) Threaded Type Flat Type " Super Quality []= }J> [= $< ]] = > ] [Z []] <[=Z Fiber Dimensions Thru-beam Type Type Type Others " # + Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 7RXJK $ # | ^ [= ' [=>_ ^ _ 10 New product introduction Tough Fiber Ramco Innovations (800) 280-6933 www.SunxSensors.com Threaded Type $ # $ # * ' ! ! | Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models FT-R41W FT-42 <Thru-beam type> FT-31/31W/43/42/42W FT-45X/R40 ? @[<\]^]__]_j ~ +' { Fibers Super Quality Threaded Type Cylindrical Type Stainless steel fittings are used for the fiber head of all models. SUS $ ! | # J | # []= ^* ] \= _ ~| ! $ $ $ ^FT-R41W' FT-R42W' FT-140) Flat Type Application '< FT-41, FD-G60, FD-G40 FD-32G Small Spot ~ ~ Narrow Beam Wide Beam Type Type Chemicalresistant Thru-beam type (one pair set) Vacuumresistant (mm) M3 M3 FT-31W R2 R1 M4 Thru-beam Type FT-43 R4 15 Type M4 7RXJK FT-42 Type 15 M4 FT-42W R1 FT-45X R4 15 ' +! | M4 ~ Others 20 # FX-500 series { FX-100 series INDEX 7RXJK 15 FT-R40 M4 M4 R4 FT-R41W W7 x H9 x D13.9 R1 * M4 FT-R42W W7 x H9 x D14.4 ~[ Earlier models comparison table FT-31 12 Fiber Dimensions Amplifiers 7RXJK 12 ~J Fiber Options ~ " @ (mm) @+ * M14 7RXJK FT-140 40 R4 $ ! specularity { ] ' @ ' # #| Heatresistant Liquid Leak / Liquid Detection FX-101 } ^? _ $ FX-102 (mm) ^# _ ^ _ ^" [_ FX-500 STD J[] [Z=Z HYPR ['J]= ]J[]= STD Z<= [=ZJ< HYPR \\= J\< STD ['== ]][[ Z HYPR ^" Z_ J'<== [[JZ STD ['[J= HYPR ^" Z_ J'<== [[JZ STD == J[\< HYPR J'J== [Z\\Z[ STD ['Z== Z [ HYPR ^" Z_ ['<== <Z\\Z STD \J= J<<[ HYPR ^" Z_ J'<== [[JZ STD == J[\< Z HYPR J'Z== [Z]\ STD Z'Z== <<[ HYPR ^" Z_ J'<== [[JZ STD ^" Z_ [\'<== [<] [= HYPR ^" Z_ [\'<== [<] ?+ " @ + = J=J[] ]]= Z[<] [J= ][[ Z[= Z< J= [JJ< = Z]< ]\= ZJZZ = [JZJ = J[]= []= ]\=< Z= \\ ]J Z= Z'== [[=ZJ< Z'[== Z< J]= [J= = J=J[] \= J[\ Z= \\ Z'=]= ==\ ['<== <Z\\Z J== [[[[ ]J= Z=<< == J[\< [\= = ['\== =J ['== ]][[ Z<= [=ZJ< \= [\Z\[ Z= ZJ< [<= <Z\\ ['<== <Z\\Z^" Z_ ['<== <Z\\Z^" Z_ J= [JJ< <J= Z=J \Z= J<ZZ= Z== [']= <\ [']== ]\=]] Z= [=<J= ]== [\<] = Z\[J [<= <Z\\ ['== =<< ['== ]][[ Z]= \J <= [[[= [= Z\]J []= ]\=< J'<== [[JZ^" Z_ J']== [J\] ][= Z==\ ['J== ][[[ Z'=== = <= [[[= [\'<== [<]^" Z_ ['=== ]][[[ [\'<== [<]^" Z_ [<'=== <Z\\Z[ [\'<== [<] ^" Z_ <'J== Z=J[ []= }Z> ]] = > []= }J> = <= > []= }Z> ]] = > =] [] $< []= }J> = <= > []= }Z> ]] = > [ ZZ [= $= = <= > $< = = > " [_ " + Z= # Z_ 7RXJK $ # | ^ [= ' [=>_ ^ _ Ramco Innovations (800) 280-6933 * [<< ! Fiber options Choose by model } P.33 | Choose by shape/ application *FTP- *FDP- Viewing new models Fibers ~ " 7RXJK M3 FD-31 12 M3 FD-31W 12 ' M3 7RXJK FD-32G ~J 17 ' ' +! | M3 FD-32GX ?+ 18 ' M3 FD-EG30 16 ' M3 FD-EG31 16 7RXJK M4 FD-41 14 FD-41W 14 ~ M4 ' M4 7RXJK FD-42G 25 ' M4 FD-42GW 25 M6 FD-62 17 7RXJK M6 FD-61 17 M6 FD-61W ~< 17 M6 7RXJK FD-61G 17 +! | M6 FD-64X # 22 15 7RXJK FD-R60 M6 Tough Fiber Fiber Selection Guide (mm) New product introduction | Lens Lens z < { z { P.30~ P.32 | $ # + $ # #| Supports spot lenses and zoom , 11 www.SunxSensors.com @ (mm) @+ ^ _ ^" [' Z_ FX-101 ?+ ^? _ " FX-500 FX-102 @ ^# _ + Z\= [[[ STD [Z] \Z[ ZZ= <<[ J] [J = J[]= [= ]][Z HYPR Z] =\ ][] Z=Z< STD [= = = J[]= [= ]][Z [] =]\[ R1 ] [Z <= ZJ<Z Z HYPR [Z =Z JJ= [Z\\Z STD J= [\<[ R2 Z== Z= [=<J= = Z]< \] J= [\= = HYPR Z [=<J <]= Z]]\[ STD [= [<[Z Z== J<= [[J ] Z\]J [ R2 [== J\J Z[= Z< HYPR ^" J_ J= [[[ <J= Z=J STD [J= ][[ [\= [[= JJ[ Z= = J= [[[ = Z]< HYPR \ =J] [= <<\J ]== R4 STD ] [Z Z= = J] [J =Z< [Z =Z Z] =\ HYPR J] =[J ] JJ< Z\= [[[ STD R2 [Z] \Z[ ZZ= <<[ J] [J = J[]= [= ]][Z HYPR Z] =\ ][] Z=Z< STD <J= Z=J Z= [=<J= J= [<\Z\ = J[]= R1 []= ]\=< ZJ= \=]] HYPR ] [Z \== J]JJ STD J= [\<[ R2 Z== Z= [=<J= = Z]< \] J= [\= = HYPR Z [=<J <]= Z]]\[ STD J= [JJ< []= ]\=< Z= [[=Z ] [Z R1 \= J]J [= ]][Z HYPR Z] =\ <= Z<J Z STD ['=== J\J= ]Z= Z=Z \= J== [= <<\J J= [JJ< ]= [[ HYPR R4 [[= JJ[ [']== ]\=]] STD = JJ=[ ]= [[ <= Z<J [Z= Z Z== [= [<[Z HYPR = Z]< ['== ]][[ STD <J= Z=J Z= [=<J= J= [<\Z\ = J[]= R1 []= ]\=< ZJ= \=]] HYPR ] [Z \== J]JJ STD == J[\< R4 Z= [<]J] <]= Z]]\[ [Z= Z Z== J]= [J= HYPR <= ZJ<Z ['[== JJ= STD ]== [\<] Z= [[=Z [= [<[Z ] Z\]J [ R4 [<= <Z\\ ZZ= <<[ HYPR ]= [\<\ <= Z<J STD <== ZJ<ZZ R4 Z\= [[[ ]]= Z[<] [[= JJ[ Z HYPR [\= = Z= \\ <] Z]]\ ['[== JJ= R2 } $ Super Quality Threaded Type Cylindrical Type []= }J> ]] = > $< = <= > Flat Type Small Spot Narrow Beam ]] = > = = > Z= <= > []= }J> Type Type $= Wide Beam Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection ]] = > $< Fiber Options = <= > ]] = > Fiber Dimensions = <= > Type $= Thru-beam Type Type Others []= }J> ]] = > $< Amplifiers = <= > FX-500 series FX-100 series $= []= }J> INDEX ]] = > $< " [_ " + Z= # Z_ # + J_ # == Z]]\ 7RXJK $ # | ^ [= ' [=>_ ^ _ Earlier models comparison table 12 New product introduction Tough Fiber Ramco Innovations (800) 280-6933 www.SunxSensors.com Cylindrical Type # # # + # =Z] Fiber Selection Guide Choose by model FD-S31 FT-S32 Choose by shape/ application Viewing new models Fibers <Thru-beam type> FT-S21/S21W/S31W ? @[<\\] ?+' { $ Super Quality Threaded Type Cylindrical Type Flat Type Stainless steel fittings are used for the fiber head of all models. $ Small Spot Narrow Beam Wide Beam Type Thru-beam type (one pair set) Type Chemicalresistant (mm) Heatresistant o1 [ Vacuumresistant ~ " 7RXJK FT-S11 o1.5 7RXJK FT-S21 10 [] Fiber Options ]== R2 6 Liquid Leak / Liquid Detection @ (mm) @+ o1.5 FT-S21W R1 10 Others Amplifiers FX-500 series FX-100 series Z] R10 FT-S32 8 FT-S31W Z R1 10 "# =[Z] o0.25 o3 J Type o3 7RXJK FT-E13 R2 5 15 "# =Z] o0.4 o3 7RXJK FT-E23 [ 5 15 o4 Type Thru-beam Type o2.5 +# ?+ Fiber Dimensions J * ' 7RXJK FT-V40 3 25 R4 Z FX-101 } ^? _ $ FX-102 (mm) ^# _ ^ _ ^" [_ FX-500 STD \= J]J HYPR J]= [J= STD J[] [Z=Z HYPR ['J]= ]J[]= STD Z<= [=ZJ< HYPR \\= J\< STD J'[== [ZZ= HYPR ^" Z_ J'<== [[JZ STD == J[\< HYPR J'J== [Z\\Z[ STD [] =]\[ HYPR ]Z Z= STD ] Z\]J HYPR Z= [=<J= STD J']== [J\] HYPR ^" Z_ J'<== [[JZ ?+ " @ + Z[= Z< [<= <Z\\ = []] =Z] <= ZJ<Z \= J]J [\ = = J=J[] []= ]]= Z[<] [J= ][[ Z[= Z< J= [JJ< }Z> = Z]< =] ]\= ZJZZ []= = [JZJ = J[]= []= ]\=< Z= \\ }J> ]J Z= ^" Z_ J'<== [[JZ J'<== [[JZ^" Z_ ['[== JJ= Z ['== =<< J'=== [[[[= <== ZJ<ZZ ['\== =J ['== ]][[ Z<= [=ZJ< [ []= \= [\Z\[ Z= ZJ< }J> [<= <Z\\ J= [[[ Z =\] 6 =ZJ< =[Z] =J[] [\ = Z ==\ [<= <Z\\ [Z] \Z[ ZZ =<< =Z] Z [<] = J[]= [J =][Z J'<== [[JZ^" Z_ J'<== [[JZ^" Z_ ['=== J\J= Z'== \ J'[== [ZZ= Z] ]= JJ<] ]] = > $< = <= > $= = = > = <= > $< = = > $]= = <= > " [_ " + Z= # Z_ INDEX Earlier models comparison table 7RXJK $ # | ^ [= ' [=>_ ^ _ Ramco Innovations (800) 280-6933 13 www.SunxSensors.com New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Flat Type Small Spot Narrow Beam Wide Beam Type [] (mm) ~ " 7RXJK o1.5 FD-S21 10 7RXJK o3 FD-S32 15 J o3 FD-S32W @ (mm) @+ 7RXJK FD-S31 10 \= J[[=Z <<= Z]\ [Z= Z ZZ= <<[ J] [J]J ] Z\]J STD Z= [=<J= HYPR \== J]JJ <J= Z=J J= [<\Z\ []= ]\=< ] [Z = J[]= ZJ= \=]] STD [Z] \Z[ HYPR ][] Z=Z< Z\= [[[ ZZ= <<[ = J[]= Z] =\ J] [J [= ]][Z []= }J> R1 STD []= ]\=< HYPR <= Z<J J= [JJ< Z= [[=Z \= J]J Z] =\ ] [Z [= ]][Z Z\ [[Z Z] =\ =Z< Z ==\ ] =[\ [] =]\[ R4 STD [Z =Z HYPR ]= [\<\ STD ]] Z[<] HYPR [= <<\J [Z= Z = J[]= J= [[[ \ =J] Z= = = Z]< R2 [ R4 R1 R2 Z Coaxial o3 FD-S33GW [] o1.5 o0.48 FD-E13 o3 J ?+ 15 15 3 o0.63 15 5 FD-E23 [J= ][[ [[= JJ[ J [] [[ =JJ } $ STD = J[]= HYPR [\= = STD Z= [<]J] HYPR ['Z== Z 15 o3 ^ _ ^" [' Z_ FX-101 ?+ ^? _ " FX-500 FX-102 @ ^# _ + [ Z] =\ = Z]< Type Chemicalresistant Heatresistant Vacuumresistant $= ]] = > Liquid Leak / Liquid Detection []= }J> $< = <= > ]] = > Fiber Options Fiber Dimensions Thru-beam Type Type = <= > Type Others $= = = > " [_ " + Z= # Z_ # + Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 7RXJK $ # | ^ [= ' [=>_ ^ _ 14 New product introduction Tough Fiber Ramco Innovations (800) 280-6933 $ # ! = Fiber Selection Guide Choose by model FD-41S Choose by shape/ application Viewing new models www.SunxSensors.com FT-42S ? < @<]\<\ <! Centering of 1/10 mm or less ?+ # Fibers Super Quality A B ==\ Threaded Type C Cylindrical Type Dimensions UNCLEAR Flat Type Small Spot Narrow Beam Dimensions unclear Screw Dimensions CLEAR Ex.) FT-E13 Dimensions unclear +0.002 o3 mm+0.05 o0.118 in 0 Previous general fiber New standard fiber Extra clearance needs to be added when designing and machining the mounting hole due to unclear dimensions. As a result, mounting variation increases and the beam axis deviates, resulting in a decrease in sensing accuracy or causing the sleeve to bend or break. Highly accurate design and machining are possible due to clear mounting hole dimensions. As a result, mounting variation is minimal, improving sensing accuracy. In addition to this, as the beam axis alignment is not affected when the fiber is changed, readjustment is not necessary. +0.002 o0.5 mm+0.05 o0.020 in 0 Screw Dimensions clear Wide Beam Type Type Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection ' % + Fiber Options Fiber Dimensions Thru-beam Type FT-E13 % ?+ # =[Z] ===] + @ # =Z] ==[= FT-E13 Type Type Others Amplifiers Stainless steel fittings are used for the fiber head of all models. Application $ FX-500 series FX-100 series INDEX Fiber options Fiber bender Earlier models comparison table *FB-1 " % +# + Ramco Innovations (800) 280-6933 15 www.SunxSensors.com New product introduction Thru-beam type (one pair set) (mm) ~J o0.88 FT-31S 10 ~ FT-42S o1.48 "# =[Z] o0.25 J 7RXJK M4 12 5 15 "# =Z] 7RXJK o0.4 o3 FT-E23 o2 7RXJK Z FT-V23 20 15 o1 o2 7RXJK 1 Sleeve part cannot be bent. FT-V25 15 15 o1 o2 Z] R2 [ FT-V24W 15 15 o1.5 o2.5 7RXJK 1.3 FT-V30 Sleeve part cannot be bent. R4 R2 Z 1 Sleeve part cannot be bent. Z R4 ^" J_ 5 15 1.1 Sleeve part cannot be bent. R2 ^" J_ 7RXJK o3 FT-E13 o1 +# 7RXJK M3 = ?+ = ~ " @ (mm) @+ 20 15 R1 R4 Tough Fiber ^ _ ^" [' Z_ FX-101 ?+ ^? _ " FX-500 FX-102 @ ^# _ + STD J[] [Z=Z HYPR ['ZZ= =J[ STD ['[J= HYPR ^" Z_ J'<== [[JZ STD [] =]\[ HYPR ]Z Z= STD ] Z\]J HYPR Z= [=<J= STD ]= [[ HYPR ['== =<< STD Z= \\ HYPR \== J]JJ STD [[= JJ[ HYPR J= [\<[ STD <= Z<Z HYPR Z'Z== <<[ = Z\[J ]]= Z[<] [\] < <J Z= Z'=]= ==\ ['<== <Z\\Z ]J= Z=<< [\= = J= [[[ Z =\] =J[] Z ==\ [<= <Z\\ [Z] \Z[ Z [<] [J =][Z ['=== J\J= = J<< Z= [[=Z \= J]J ]]= Z[<] = [\ [= ]][Z ] [Z ZJ= \=]] Z== <= ZJ<Z Z= = ['Z== Z ['=== J\J= J= [JJ< [== J\J (mm) [J= ][[ J= [JJ< Choose by model =] ]] = > J== [[[[ == J[\< $< 6 =ZJ< [\ = =[Z] = = > ZZ =<< = J[]= =Z] [<= <Z\\ == [] =] \] J= Z<= [=ZJ< Small Spot $J= J] [J \= J]J = <= > [= = = [\ ]] = > [= ~J ?+ o0.8 15 FD-EG30S R4 7RXJK M4 ~ (mm) FD-41S o1.48 FD-41SW o1.48 7RXJK = ~< M6 [] FD-61S o2.5 15 R1 ^" J_ Z ^" J_ R4 [ o0.63 15 FD-E23 5 J Small diameter 15 15 o3 o1.5 7RXJK FD-V30 2 Sleeve part cannot be bent. 15 o3 15 o1.5 FD-V30W 2 R2 R1 Sleeve part cannot be bent. ] 15 o5 7RXJK 20 o2 Sleeve part cannot be bent. 2.3 FD-V50 R4 STD ]= [\<\ HYPR [= <<\J STD [Z] \Z[ HYPR ][] Z=Z< STD = J[]= HYPR JJ= [Z\\Z Z= [<]J] HYPR FD-E13 15 3 o3 Narrow Beam Wide Beam Type Type Chemicalresistant ^ _ ^" [' Z_ FX-101 ?+ ^? _ " FX-500 FX-102 @ ^# _ + STD R4 o1.5 o0.48 J ?+ R2 ^" J_ = M4 +# [ = ~ " @ @+ [] 12 Flat Type Heatresistant (mm) 12 Super Quality Cylindrical Type ]] = > =] Fibers Threaded Type M3 Choose by shape/ application Viewing new models [ " [_ " + Z= # Z_ J_ [= Fiber Selection Guide Z ['Z== Z Vacuumresistant [[= JJ[ = J[]= J= [[[ \ =J] Z= = = Z]< Z\= [[[ ZZ= <<[ = J[]= Z] =\ J] [J [= ]][Z ]] = > [= = [= ]][Z ] [Z [Z =Z [] =]\[ <= ZJ<Z = <= > $= = = > $< \= J[[=Z <<= Z]\ [J= ][[ ZZ= <<[ J<= [[J ] Z\]J ]] = > ] =[\ [] =]\[ STD ]] Z[<] HYPR [= <<\J [Z= Z = J[]= J= [[[ \ =J] Z= = = Z]< = = > STD <] Z]]\ HYPR Z= \\ [J= ][[ [Z= Z J] [J [ =]][ Z] =\ ] Z\]J ]] = > = []] J= [[[ [= =J\ Z ==\ 6 =ZJ< Z= = ZZ= <<[ Z[= Z< ] Z\]J Z] =\ = []] [== J\J STD Z= = HYPR = J[]= STD [Z= Z HYPR J= []< Fiber Options Fiber Dimensions Thru-beam Type Z\ [[Z Z] =\ =Z< Z ==\ STD [Z =Z HYPR ]= [\<\ Liquid Leak / Liquid Detection Type Type Others = <= > Amplifiers $= FX-500 series FX-100 series INDEX $J= = <= > ]] = > " [_ " + Z= # Z_ # + J_ [= =J\ 7RXJK $ # | ^ [= ' [=>_ ^ _ Earlier models comparison table 16 New product introduction Tough Fiber Ramco Innovations (800) 280-6933 www.SunxSensors.com Flat Type ' ' # $ # #| # # Fiber Selection Guide Choose by model FT-Z30H FT-Z30E FT-Z30 Choose by shape/ application Viewing new models Fibers Mounting with M2 or M3 screw < ! installation angles. * FT-WZ4}Z20HBW' FD-WZ4}Z20HBW' [ # ~Z # FT-WZ7}Z40HBW' FD-WZ7}Z40HBW' [ # ~J # FT/FD-WZHBW { # @ # Super Quality Threaded Type Space-saving installation Cylindrical Type Top Sensing M2 screw Side Sensing FD-Z20HBW 10 mm 0.394 in Flat Type 2 mm The metal sleeve ensures tightening strength 0.079 in Small Spot Boss Narrow Beam Wide Beam Type Type Thru-beam type (one pair set) Chemicalresistant Heatresistant Vacuumresistant Liquid Leak / Liquid Detection (mm) W3 x H8 x D12 ~ " 7RXJK FT-Z30H W3 x H12 x D8 7RXJK FT-Z30E Thru-beam Type STD STD R2 ^" Z_ R1 @ W8.5 x H12 x D3 7RXJK @ FT-Z30 STD R2 ^" Z_ STD FT-Z30W Amplifiers W10 x H7 x D2 FX-500 series FX-100 series FT-WZ4 [ * @ W2 x H10 x D10 @ FT-Z20HBW R1 W14 x H7 x D3.5 FT-WZ7 Z @ W3.5 x H14 x D11 Earlier models comparison table HYPR @ FT-Z40HBW J'<== [[JZ Z'[== Z< HYPR @ J'<== [[JZ J'== [JJ] HYPR W8.5 x H12 x D3 INDEX STD ^" Z_ Type FX-101 ^? _ (mm) FX-102 ^# _ J'<== [[JZ^" Z_ J'<== [[JZ^" Z_ ['== ]][[ Z'<== [=ZJ<Z J'Z== [Z]\ [= J[\= J'<== [[JZ J']== [J\] HYPR Z FT-Z30EW ?+ " @ + J']== [J\] ^" Z_ R1 W3 x H12 x D8 Type FX-500 HYPR FT-Z30HW Fiber Dimensions ^ _ ^" [_ R2 W3 x H8 x D12 Fiber Options Others @ (mm) @+ J'<== [[JZ [']== ]\=]] ^" Z_ J'<== [[JZ STD ]J= Z=<< HYPR ^" Z_ ['<== <Z\\Z STD Z<= [=ZJ< HYPR ['[== JJ= STD ['== ]][[ HYPR J']== [J\] STD == J[\< HYPR J'J== [Z\\Z[ Z J J'<== [[JZ^" Z_ J'<== [[JZ^" Z_ ['Z== Z Z'== \ J'Z== [Z]\ = Z\[J J'<== [[JZ^" Z_ J'<== [[JZ^" Z_ ['== ]][[ Z'=== = Z'<== [=ZJ<Z <J= Z=J J'<== [[JZ^" Z_ J'<== [[JZ^" Z_ [= Z\]J ['Z== Z Z'J== \=]][ [= [<[Z Z J'J== [Z\\Z[ J'Z== [Z]\ ]= Z[Z<= ['=== J\J= ['== =<< Z= [[=Z ['[== JJ= \== J]JJ ZJ= \=]] [] JJ= [Z\\Z <= Z<J [== J\J <= Z<J ]= ZZ[ [== J\J =] [= = JZ= [Z]\ ]] Z[<] J'J== [Z\\Z[ Z'J== \=]][ JJ= [Z\\Z \= J]=J\ ['=== J\J= [] Z\= [[[ ['\== =J ['== ]][[ Z<= [=ZJ< \= [\Z\[ Z= ZJ< [ [<= <Z\\ $= = <= > $< $< " [_ " + Z= # Z_ 7RXJK $ # | ^ [= ' [=>_ ^ _ Ramco Innovations (800) 280-6933 17 www.SunxSensors.com New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Fibers Super Quality Threaded Type Cylindrical Type Flat Type Small Spot Narrow Beam Wide Beam Type Type (mm) ~ " (mm) @ @+ @ FD-WZ4 W10 x H7 x D2 [ * @ @ FD-Z20HBW W2 x H10 x D10 R1 @ FD-WZ7 W14 x H7 x D3.5 Z @ FD-Z40HBW W3.5 x H14 x D11 Chemicalresistant ^ _ ^" [' Z_ ?+ " FX-500 @ + [ [[= ==J\ JJ[ STD Z <] ==\ Z]]\ [ ] ==J\ JJ< J J] =[[ [J HYPR [ ZJ= ==J\ \=]] ] [J =[\ =][Z [ Z[= ==J\ Z< STD Z ] ==\ JJ< [ [= ==J\ = Z ]] ==\ Z[<] HYPR [ J= ==J\ [JJ< J [] =[[ =]\[ FX-101 ^? _ FX-102 ^# _ Z Z= ==\ = [ = ==J\ Z]< Vacuumresistant Liquid Leak / Liquid Detection Z J= ==\ [[[ $< [ \= ==J\ J]J ZJ= \=]] STD [ ]] [[= JJ[ [= = ==J\ Z[<] [] <] ==]\ Z]]\ [<= HYPR J Z] =[[ =\ <Z\\ J= [<\Z\ ]= Z[Z<= STD [ \= Z<= [=ZJ< = []= ==J\ J]J $< [ [<= ==J\ <Z\\ =] Z= HYPR <= Z\\Z[ Z ]= ==\ [\<\ ==Z= \\ " [_ " + Z= # Z_ # + Heatresistant Fiber Options = <= > Fiber Dimensions Thru-beam Type Type Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 18 New product introduction Tough Fiber Fiber Selection Guide Choose by model Ramco Innovations (800) 280-6933 www.SunxSensors.com Small Spot ! Choose by shape/ application Viewing new models Applications Packing detection Number of IC pins checking FD-42G/42GW Fibers FD-EG31 Super Quality FX-MR6 (lens) + FD-EG31 (fiber) IC FX-MR5 Threaded Type Discrimination of 0603 chip direction FX-MR3 Cylindrical Type Flat Type Small Spot +# ' # z { Narrow Beam Wide Beam % (mm) (mm _ ^"_ Type % (mm _ ^"_ ~ " ~ " 16 Type Z= <= > FD-EG31 =[ === o4 Chemicalresistant ]== Heatresistant =] =Z<==Z= FX-MR6 Liquid Leak / Liquid Detection Z= <= > = = > 7RXJK R2 FD-42G FD-42GW = ==[< Z = <= > R1 R2 FD-32G FD-32GX ]] = > 7RXJK Fiber Options @ R4 FD-EG30 =Z === Vacuumresistant Fiber Dimensions @ @+ (mm) ]] = > [ R2 15 Z= <= > FD-EG31 =[] ===< Thru-beam Type o4 ]== Type R4 FD-EG30 =J ==[Z Type $= Others ]=] =Z\]==Z= FX-MR3 = = > 7RXJK FD-42GW =] ==Z= Amplifiers R2 FD-42G Z 7RXJK FX-100 series FD-32GX =] ==Z= o4 <[ =ZJ<==J\ FX-MR1 = = > [ R1 7RXJK 27.1 [] J = Z= ==Z ==\ =Z [<\J FX-MR2 o7.1 = = > 7RXJK W6.3 x H20.3 x D10.3 =] J= [J J= ==Z= =[[ =][Z [[[ FX-MR5 = = > R2 FD-42G FD-42GW Earlier models comparison table FD-42G FD-42GW = <= > Z ]] = > R2 R2 FD-42G FD-42GW INDEX ^+# _ 7RXJK 20.2 ]] = > R2 FD-32G FX-500 series R1 = = > R1 R2 R1 ]] = > = <= > ]] = > = <= > ]] = > = <= > " FX-500}FX-100 7RXJK $ # | ^ [= ' [=>_ ^ _ Ramco Innovations (800) 280-6933 19 www.SunxSensors.com New product introduction Narrow Beam Tough Fiber #' # Fiber Selection Guide J> Choose by model Choose by shape/ application Applications Viewing new models FR-KZ50H Fibers FR-KZ22E Super Quality FT-KV40 Thru-beam type (one pair set) (mm) o3.5 o3.7 ~ " 7RXJK STD "# o4 R2 7RXJK FT-KV40 3 25 Z o4 FT-KV40W 3 R1 25 1.5 x 2 7RXJK FT-KV26 2 20 J'<== [[JZ^" Z_ J'<== [[JZ J'<== [[JZ^" Z_ J'<== [[JZ^" Z_ HYPR ^" Z_ J'<== [[JZ ['Z== Z STD J'<== [[JZ^" Z_ ^" Z_ J'<== [[JZ J'<== [[JZ^" Z_ J'<== [[JZ^" Z_ HYPR ^" Z_ J'<== [[JZ ['Z== Z STD J'<== [[JZ^" Z_ ^" Z_ J'<== [[JZ J'<== [[JZ^" Z_ J'[== [ZZ= HYPR ^" Z_ J'<== [[JZ \= J== STD ['<== <Z\\Z [= Z\]J ['Z== Z = [JZJ HYPR [<= <Z\\ Z']== \Z] ^" Z_ FT-KS40 20 ^ _ ^" [_ FX-101 } ?+ ^? _ $ " FX-500 FX-102 (mm) @ ^# _ + @ (mm) @+ R2 Z'Z== <<[ J'<== [[JZ ZZ $= * * "# ~ " Z'Z== <<[ J'<== [[JZ Z] = <= > => ^" Z_ $J= @ @+ (mm) R1 W30 x H30 x D0.5 7RXJK [J] ]J[] ]<= ZZ= [ Chemicalresistant [> =]> Heatresistant Liquid Leak / Liquid Detection ?+ " @ + STD [== ['== J\J ]][[ [== \\= J\J J\< [== ['Z== J\J Z [== = J\J J==\ HYPR [== ['\== J\J =J [== \= J\J [\Z\[ FX-500 FX-101 ^? _ FX-102 ^# _ [== ]]= J\J Z[<] [== J= $= J\J JZ< 7RXJK Fiber Dimensions [] <= =]\[ [[[= [] Z== [] J[= =]\[ [ZZ=] [] [= =]\[ [<[Z =]\[ [] ZZ= =]\[ <<[ [] J<= HYPR [] ]= =]\[ ZZ[ [] [== =]\[ J\J =]\[ [[J FR-KZ50H W10.6 x H28 x D10.1 W9.5 x H25 x D5.2 R2 Thru-beam Type Type Z = <= > $J= Z= == = J[\< Z= Z== Z= J== = [[[[ Z= == = [] = Z= Z== = Z= J]= HYPR Z= ['=== = J\J= Z= Z== = = [J= FR-KZ50E Type Others STD 7RXJK Fiber Options Z] ]] > STD FR-KZ22E W4 x H2 x D21.5 Type Type W7.5 x H2.2 x D11.2 W5.2 x H9.5 x D21 Wide Beam Vacuumresistant W5.2 x H9.5 x D16 FR-Z50HW Flat Type Narrow Beam ^ _ ^" [' J_ (mm) Cylindrical Type Small Spot ^" Z_ Threaded Type Amplifiers W28 x H10.6 x D10.1 FX-500 series FX-100 series ^ _ ^" [_ (mm) ~ " @ @+ (mm) W5.2 x H9.5 x D16 FD-Z50HW R1 Z FX-101 ?+ ^? _ " FX-102 @ ^# _ + STD [= ['[== =J\ JJ= [= Z== [= <]= =J\ Z]]\[ [= ['=== =J\ J\J= =J\ [= [= =J\ [<[Z [= ]J= $= HYPR [] [J= =]\[ ][[ =J\ Z=<< [= Z']== =J\ \Z] FX-500 INDEX = <= > " [_ " + Z= # Z_ J_ ! ZZ # FR-Z50HW # ^_ 7RXJK $ # | ^ [= ' [=>_ ^ _ Earlier models comparison table 20 New product introduction Tough Fiber Fiber Selection Guide Choose by model Ramco Innovations (800) 280-6933 www.SunxSensors.com Wide Beam #| # # $ FT-A11 Choose by shape/ application Viewing new models Applications Inspecting screw height Control the amount of meandering FD-A16 Spot size 2 x 15mm (by a distance of 15mm) FT-A11 Fibers Super Quality FT-A32 Threaded Type Cylindrical Type Type : With slit mask Flat Type Type : Without slit mask Small Spot Narrow Beam Wide Beam Type Type Thru-beam type (one pair set) (mm) ~ " Chemicalresistant Heatresistant Sensing width 32mm Vacuumresistant W5 x H69 x D20 Fiber Options Others Sensing width 32mm ^" Z_ HYPR ^" Z_ FX-101 ^? _ FX-102 ^# _ (mm) J'<== [[JZ^" Z_ J'<== [[JZ^" Z_ J'<== [[JZ^" Z_ Z'[== Z< J'<== [[JZ J'<== [[JZ J'<== [[JZ = <= > J'<== [[JZ JZ JZ STD FT-A32W W4.2 x H31 x D13.5 # # Sensing width 11mm R1 HYPR ^" Z_ 7RXJK FT-A11 FT-A11W R2 R1 W4.2 x H31 x D13.5 ^" Z_ W5 x H69 x D20 Sensing width 11mm Thru-beam Type Type STD R2 ?+ " @ + ^" Z_ Fiber Dimensions Type FT-A32 FX-500 # # * Liquid Leak / Liquid Detection 7RXJK ^ _ ^" [_ @ (mm) @+ Sensing width 5.5mm 7RXJK FT-AL05 W5 x H15 x D15 R2 Z STD J'<== [[JZ^" Z_ J'<== [[JZ^" Z_ J'<== [[JZ^" Z_ J'=== [[[[= J'<== [[JZ ^" Z_ J'<== [[JZ = ]] > J'<== [[JZ^" Z_ ['\== =J J'<== [[JZ^" Z_ J'<== [[JZ J'<== [[JZ^" Z_ HYPR ^" Z_ ^" Z_ J'<== [[JZ ['[== JJ= ZZ [[ STD J'<== [[JZ^" Z_ ^" Z_ J'<== [[JZ J'<== [[JZ^" Z_ ['== <<\Z\ J'<== [[JZ^" Z_ J'== [JJ] HYPR ^" Z_ J'<== [[JZ ['J== ][[[ STD [']]= <[=Z <= JJ] [']== ]\=]] Z]= \J ]== [\<] <<= Z]\ =Z] ]] HYPR [= <<\J Z'J== \=]][ ^" Z_ J'<== [[JZ $= = = > = ]] > ]] = > " [_ " + Z= # Z_ J'<== [[Z Amplifiers FX-500 series (mm) * FX-100 series 7RXJK FD-A16 W7 x H15 x D30 INDEX Earlier models comparison table ~ " 7RXJK FD-AL11 W5 x H20 x D20 @ @+ (mm) R4 R2 Z ^ _ ^" [' Z_ FX-101 ?+ ^? _ " FX-500 FX-102 @ ^# _ + STD Z== HYPR STD JZ= [Z]\ HYPR <= Z<J Z== Z== [= ]][Z ] Z\]J [Z= Z Z= \\ ]J= Z=<< ][= Z==\ [= = ]= [\<\ [== J\J Z] [[ZZ= = <= > $= ]] = > " [_ " + Z= # Z_ # + 7RXJK $ # | ^ [= ' [=>_ ^ _ Ramco Innovations (800) 280-6933 21 www.SunxSensors.com New product introduction Tough Fiber $ # | $ # #| # | Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Applications Detecting glass substrate Mounting in handring arms Fibers Mapping fiber FD-L32H Seating FD-L12W Super Quality confirmation fiber FD-L11 Threaded Type FD-L30A Cylindrical Type Flat Type Small Spot Alignment fiber FD-L22A/L30A/L31A Narrow Beam (mm) ~ " Mapping @ @+ W25 x H7.3 x D30 7RXJK Alignment FD-L30A W20 x H29 x D3.8 7RXJK Alignment FD-L31A W23.5 x H29 x D4.5 HYPR J Seating confirmation 7RXJK FD-L23 Z J FD-L10 W12 x H19 x D3 7RXJK FD-L21 W24 x H21 x D4 FD-L21W R2 Z R1 ?+ W24 x H21 x D4 7RXJK FD-L12W R1 W6 x H18 x D14 W7.2 x H7.5 x D2 R2 FD-L20H = Z\ = [[Z HYPR = J= = [[[ STD = \] = =J HYPR = [[] = =]J STD = ] = =[\ HYPR = < = =ZJ< R4 7RXJK STD STD FD-L11 Seating confirmation = J = [<\J R2 7RXJK W12 x H19 x D3 = J = [<\J STD = Z = =\] HYPR = J[ = [ZZ= W18 x H29 x D3.8 Seating confirmation = [[= = JJ[ JJ =[] [Z\\ HYPR J J] =[[ [J FD-L22A W17 x H29 x D3.8 = ]< = ZZ=] 7RXJK Alignment HYPR STD R2 R4 FX-500 STD R4 FD-L32H (mm) [ Wide Beam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hemicalresistant Heatresistant Liquid Leak / Liquid Detection JJ =[] [Z\\ ] J= JJ =[] [Z\\ =[\ [[[ JZ =[] [Z<= JJ ] Z] =[\ =\ =[] [Z\\ = Z = [[=Z = Z = [=<J = Z = =\] = [ = ==\ Type Vacuumresistant = = = []] = ]= = [\<\ STD [] [< ==]\ =<J= HYPR [ [\ ==J\ = STD ZJ =\=< HYPR ] [Z STD =J[] HYPR [ =]][ = <= > Type = = > Fiber Options Fiber Dimensions Z= = > Thru-beam Type Type $= Type Others = <= > Amplifiers FX-500 series FX-100 series J] [J ] [] JZ [Z<= =[\ =]\[ Z [] ==\ =]\[ [ J= ] \ =[\ =J] ==J\ [[[ = = > [Z] =\Z [ ] [Z =Z ==J\ =[ $J= =] ==Z= =Z< =] =] ==Z= =[] ==Z= =Z< = <= > " [_ [== [== = J\J J\J ==Z (FD-L32H ' FD-L21 FD-L21W Z ==\ ) (FD-L20H # + ' FD-L10 # [== [== J\J J\J _ Z_ " + Z= # 7RXJK $ # | ^ [= ' [=>_ ^ _ INDEX Earlier models comparison table 22 New product introduction Tough Fiber Ramco Innovations www.SunxSensors.com # + ' ! Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models (800) 280-6933 Applications [ Detecting wafer Detection of transparent seals on transparent sheet FR-KZ50E Fibers FR-Z50HW Super Quality Threaded Type Cylindrical Type FR-KZ22E RF-003 ^ FR-KZ50E) Flat Type Small Spot Narrow Beam Wide Beam ^ _ ^" [' Z_ Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type Type Type Others Amplifiers FX-500 series FX-100 series Heatresistant "# Chemicalresistant * Type * Type (mm) ~ " @ @+ (mm) W5.2 x H9.5 x D16 FR-Z50HW R1 W30 x H30 x D0.5 ?+ " @ + STD [== ['== J\J ]][[ [== \\= J\J J\< [== ['Z== J\J Z [== = J\J J==\ HYPR [== ['\== J\J =J [== \= J\J [\Z\[ FX-500 FX-101 ^? _ FX-102 ^# _ [== ]]= J\J Z[<] [== J= $= J\J JZ< Z] ]] > W7.5 x H2.2 x D11.2 7RXJK STD [] J[= =]\[ [ZZ=] HYPR [] ]= =]\[ ZZ[ FR-KZ22E W4 x H2 x D21.5 W5.2 x H9.5 x D21 R2 7RXJK FR-KZ50H W10.6 x H28 x D10.1 W9.5 x H25 x D5.2 [] <= =]\[ [[[= [] Z== [] [= =]\[ [<[Z =]\[ [] ZZ= =]\[ <<[ [] J<= [] [== =]\[ J\J =]\[ [[J Z $J= STD Z= J== = [[[[ HYPR Z= ['=== = J\J= 7RXJK FR-KZ50E = <= > Z= == = J[\< Z= Z== Z= == = [] = Z= Z== = Z= J]= Z= Z== = = [J= W28 x H10.6 x D10.1 " [_ " + Z= # Z_ ! <j! z { " RF-230 RF-220 RF-210 HYPR ?+ [== [\'=== J\J =J= [== '=== J\J J[\<= [== ]']== J\J Z[<]J] [== '=== J\J J[\<= [== '== J\J []=J\ [== Z'== J\J [=<Z\\ ^ ) FX-500 " STD @ [== ]'=== J\J [\<]= [== J']== J\J [J\] [== Z'== J\J \ [== J'<== J\J [[JZ [== J'=== J\J [[[[= [== [']== J\J ]\=]] [== Z'\== J\J [[[J [== ['== J\J =<< [== ['Z== J\J Z + [== ['== J\J ]][[ [== J= J\J JZ< [== ]J= J\J Z=<< FX-101 [== Z'== J\J \ [== ['J== J\J ][[[ [== \= J\J J]J FX-102 [== ]'=== J\J [\<]= [== Z'<== J\J [=ZJ<Z [== ['J== J\J ][[[ " ! [== #' # + ' $ ' ! INDEX Fiber option R z <j{ P.33 | Earlier models comparison table 7RXJK $ # | ^ [= ' [=>_ ^ _ Ramco Innovations (800) 280-6933 23 www.SunxSensors.com New product introduction Chemical-resistant Tough Fiber * @' # { Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Applications Detecting wafer cassette in cleaning tank Fibers Cleaning tank Super Quality Threaded Type FT-L80Y Wafer cassette FT-Z802Y Cylindrical Type Flat Type Small Spot Wafer Narrow Beam Wide Beam Type Type Chemicalresistant Heatresistant FT-Z802Y Vacuumresistant Liquid Leak / Liquid Detection Fiber Options Thru-beam type (one pair set) (mm) ~ " @ (mm) @+ W7 x H15 x D13 FX-500 STD FT-Z802Y Z] Z Fiber Dimensions ^ _ ^" [_ HYPR ^" Z_ ?+ " @ + FX-101 ^? _ (mm) FX-102 ^# _ J'<== [[JZ^" Z_ J'[== [ZZ= J'<== [[JZ^" Z_ ]Z= Z=Z ['\== =J J'[== [ZZ= = []= J'<== [[JZ Thru-beam Type Type Type $< = <= > Others + [[] > + STD o5.5 ^" Z_ FT-HL80Y HYPR (25) ^" Z_ J'<== [[JZ^" Z_ J'<== [[JZ^" Z_ Z'J== \=]][ = Z\[J J'<== [[JZ J'<== [[JZ Amplifiers = [[] > \\= J\< J Z'J= \Z[Z< FX-500 series FX-100 series o5.5 FT-L80Y (25) J= STD J'<== [[JZ^" Z_ ^" Z_ J'<== [[JZ J'<== [[JZ^" Z_ ['[== JJ= Z Z'== [[=ZJ< Z'<== [=ZJ<Z HYPR ^" J_ ^" Z_ J'<== [[JZ \Z= J<ZZ= $< INDEX = = > +# STD o5.5 (25) FT-V80Y ['J== ][[[ HYPR ^" Z_ J'<== [[JZ Z'== [[=ZJ< Z'Z== <<[ == J[\< Z= \\ J= [JJ< == J[\< Z " [_ " + Z= # Z_ J_ # ]== [\<] Earlier models comparison table 24 New product introduction Tough Fiber Fiber Selection Guide Choose by model Ramco Innovations (800) 280-6933 www.SunxSensors.com Heat-resistant $ +<= J]= > +< <<Z >@ # ! #| Choose by shape/ application Viewing new models Fibers Applications IC detection within a high temperature handler Detecting glass substrates FT-H20W-M1 Super Quality Threaded Type Cylindrical Type Flat Type Small Spot Narrow Beam Wide Beam Type Type Chemicalresistant Thru-beam type (one pair set) + (mm) (FX-LE1}LE2}SV1) Heatresistant Vacuumresistant M4 J]= > <= M4 + o2.1 27 Z== > M4 Thru-beam Type [J= > M4 23 ^FX-LE2 _ M4 (FX-LE1}LE2}SV1) + ^!_ M4 23 R10 FT-H20-M1 Z] FT-H13-FM2 FT-H20-J30-S ^" ]_ FT-H20-J50-S ^" ]_ Z== > +# 24 Earlier models comparison table FT-H20W-M1 FT-H20-J20-S ^" ]_ o3.8 INDEX Z [ Others FX-100 series @ Z] Z 16 Type FX-500 series Z] 23 (FX-LE1}LE2}SV1) Type FT-H35-M2S6 ^ _ ^" [_ FX-101 ?+ ^? _ " FX-500 FX-102 (mm) @ ^# _ + STD J= [<\Z\ HYPR ['Z== Z = J<< <= Z<J [= <<\J Z]= \J \= [\Z\[ = J[]= [Z STD ['=== J\J= = []= = JJ=[ [== J\J J== [[[[ J== [[[[ HYPR ^" Z_ ['<== <Z\\Z \= J]J = <= J]= > R10 Allows flexible wiring Lens mountable (FX-LE1/LE2/SV1) Fiber Dimensions Amplifiers FT-H35-M2 30 Liquid Leak / Liquid Detection Fiber Options ~ " @ @+ (mm) FT-H20-VJ50-S ^" ]_ <= Z== > [Z [] <= [J= > [Z <= Z== > Z== ^" J_ J== ^" J_ + [ ^" _ ]== ^" J_ STD ['=== J\J= = []= \= J[[=Z [J] ]J[] J== [[[[ Z= [<]J] HYPR \= J]J ['<== <Z\\Z STD o4 FT-H20-VJ80-S ^" ]_ STD ['J== ][[[ ]= Z[Z<= \<= J\] Z[= Z< JJ= [Z\\Z ]= Z[Z<= HYPR ^" Z_ ['<== <Z\\Z [[= JJ[ STD ['\== =J == Z]]\ ['J== ][[[ Z]= \J [= [<[Z == Z]]\ HYPR [= ]][Z J'J== [Z\\Z[ == ^" J_ <== ZJ<ZZ HYPR Z'[== Z< ['J== ][[[ \= J]J []= ]\=< J\= []J] ]== [\<] [Z= Z " [_ " + Z= # Z_ J_ @ ^+_ + @ Z <]<Z ^+ _ _ Z] =\ ]_ + ^FT-FM2_ Ramco Innovations (800) 280-6933 www.SunxSensors.com < Heat-resistant side (-60 to +200 C -76 to +392 F) * Ordinary temperature (-40 to +70 C -40 to +158 F) 25 New product introduction Tough Fiber Ordinary temperature side 100 mm 3.937 in approx. Amplifiers Fiber Selection Guide Choose by model Heat-resistant side fiber Choose by shape/ application Ordinary temperature side fiber (FT-FM2) Nut (resin) Nut (metal), Use when securing to a mounting bracket. Viewing new models ' ! ! !! + FT-H20-J20' FT-H20-J30' FT-H20-J50' FT-H20-VJ50' FT-H20-VJ80 Fibers FT-FM2 Threaded Type Super Quality Cylindrical Type + (mm) ~ " @ @+ (mm) ^ _ ^" [' Z_ FX-101 ?+ ^? _ " FX-500 FX-102 @ ^# _ + M6 FD-H35-M2 25 Z o2.8 M6 J]= > FD-H35-M2S6 22 \= M4 o2.1 R10 M6 [ FD-H20-M1 28 M4 FD-H20-21 27 [J= > M6 FD-H13-FM2 FD-H30-L32 Z] W19 x H27 x D5 Heatresistant ] JJ< Z== STD JJ= [Z\\Z HYPR = JJ=[ ]]= Z[<] ]== [\<] Z== ]] Z[<] [Z= Z J== [[[[ STD ZJ= \=]] HYPR = J=J[] ]== [\<] J= [\<[ [J= ][[ ] [Z \= J]J Z= [[=Z Fiber Options STD <= Z][\ <== ZJ<ZZ Z== <] Z]]\ [== J\J <= Z= [[=Z [J= > Fiber Dimensions Vacuumresistant Liquid Leak / Liquid Detection <= Z== > J FD-H25-L45 Z Chemicalresistant ]]= Z[<] = [JZJ [= ]][Z ] [Z STD [ J= ==J\ [[[ [< [] Z< ==]\ [=Z [ Z ==J\ [[=Z =[] =<J= Z= [] Z ==]\ =\] ZJ Z]= > HYPR Z [ ==\ ==\ =[] =\=< [ J[ ==J\ [ZZ= STD J =[] [<\J J] ] Z =[\ [<] ] J =[ [<\J =Z< [J Z= ] = =[\ []] J = > HYPR J] =[] [[J <] J =Z]< [JJ\ =Z< [\< W21 x H34.5 x D5 Type STD Z<= [=ZJ< HYPR = JJ=[ Z FD-H25-L43 FD-H18-L31 <= J]= > STD [ =<<\ HYPR = []] W21 x H33.2 x D5 [= > Narrow Beam Type ] Z\]J Z= [[=Z Z W19 x H27 x D5 Z]= > ]= Z[Z<= <= [[[= []= ]\=< ] [Z J]= [J= HYPR = J<< 21 J== > STD Z<= [=ZJ< HYPR Z= ZJ< @ Z] 27 Z== > + FD-H35-20S Small Spot Wide Beam Z] <= Flat Type STD [< =<J= HYPR <= ZJ<Z J= [[[ Z \ Z] =\ ==\ =J] <= [Z =Z = [ J== > [] < ==]\ =ZJ< = =<<\ JZ [Z<= Z =\] [J =][Z Z <] ==\ =Z]< = [= = =J\ <= = Z] [= > = =\ " [_ # + ^]= ]= [\<\ [\<\ FD-H30-L32' FD-H18-L31' [== [== = J\J J\J ==Z FD-H25-L43 FD-H25-L45_ Z_ " + Z= # Thru-beam Type Type Type Others Amplifiers FX-500 series FX-100 series INDEX Fiber options | z < { P.30~ Earlier models comparison table 26 New product introduction Tough Fiber Fiber Selection Guide Choose by model Ramco Innovations (800) 280-6933 www.SunxSensors.com Vacuum-resistant ? + J== > ]Z >@ | FV-BR1 [JJ [=[= J} ' # FT-H30-M1V-S FD-H30-KZ1V-S Choose by shape/ application FD-H30-L32V-S Viewing new models Applications Highly resistant to repeated bending [ Fibers Vacuum resistant convergent reflective fiber Super Quality FD-H30-L32V-S Vacuum resistant long range reflective fiber FD-H30-KZ1V-S Vacuum resistant expansion lens Threaded Type [=='=== ^Z= =\ _' FV-LE1 Cylindrical Type Vacuum resistant thru-beam fiber FT-H30-M1V-S Flat Type Small Spot Narrow Beam Vacuum resistant thru-beam fiber Wide Beam FT-H30-M1V-S Type Vacuum resistant side-view lens FV-SV2 Type Chemicalresistant Heatresistant Vacuumresistant Thru-beam type (one pair set) Liquid Leak / Liquid Detection ^ ) Thru-beam Type FX-100 series INDEX Earlier models comparison table FT-H30-M1V-S ^"_ [ [ 30 FX-500 STD Z= [=<J= HYPR ['=== J\J= ?+ " @ + FX-101 ^? _ FX-102 ^# _ ]\= ZJZZ = []= [[= JJ[ [<= <Z\\ Z= [[=Z ]] Z[<] (mm) [Z J= J== > ^ _^" Z_ + FX-500 series J== > ^FV-LE1/SV2) M4 ~ " Type Amplifiers (mm) " + ^FV-BR1_ ^FT-J8_ Type Others + Fiber Dimensions Fiber Options + @ @+ (mm) (mm) ~ " @ @+ (mm) J== >' W9.5 x H5.2 x D15 ?+ " @ + FX-101 ^? _ FX-102 ^# _ STD FD-H30-KZ1V-S ^" [_ [ [= J= =J\ [JJ< Z] = Z= Z== = [] Z= =]\[ [=<J= =\ J[]= Z= [Z= = Z [= ZZ= HYPR Z= ] = [Z =J\ <<[ ] ]== =[\ [\<] J STD =J[] HYPR [ ==\ [ J== >' FD-H30-L32V-S ^" [_ W19 x H5 x D27 FX-500 J= [Z =Z Z] <] J== > [= =J\ ==\ =Z]< ]] =Z[ = [[ [] J ==]\ =[[ = =JJ " [_ + ^FV-BR1_ ^FT-J8_ Z_ [== [== = J\J J\J ==Z Ramco Innovations (800) 280-6933 www.SunxSensors.com 27 New product introduction Tough Fiber Fiber Selection Guide Choose by model Choose by shape/ application Viewing new models Set contents Vacuum side Atmospheric side Digital fiber sensor Fibers Super Quality Vacuum resistant fibers Threaded Type Atmospheric side fiber (FT-J8) Chamber wall or flange (3.0 to 20 mm 0.118 to 0.787 in thick) Cylindrical Type Photo-terminals (FV-BR1) Flat Type ' ! ! !! # FT-H30-M1V ^ _ FD-H30-KZ1V FD-H30-L32V # # + FV-BR1 ^ _ FT-J8 ^ _ # Small Spot ~ | FD-H30-KZ1V(-S) MS-FD-2 Narrow Beam Wide Beam Type Type Fiber options Chemicalresistant z < { Heatresistant @ + % ^" [_ ~ " % Vacuumresistant Liquid Leak / Liquid Detection $ <= J]= > < <<Z >@ ^" J_ J< =[Z ^ _ ^" _ FX-500 FV-LE1 @ ~ HYPR ?+ " STD @ + J'<== J'<== J'== [']== \== J= FT-H30-M1V-S [[JZ [[JZ [JJ] ]\=]] J]JJ []< ^" Z_ +# ^" [_ FX-101 FX-102 ]= [[ ['<== <Z\\Z ^" Z_ Fiber Dimensions \=> <= J== > < ]Z >@ ^" J_ J =[< ^ _ ^" _ @ ~ Thru-beam Type Type FX-500 FV-SV2 HYPR ?+ " STD @ + J'<== J'<== J'== [']== \== J= FT-H30-M1V-S [[JZ [[JZ [JJ] ]\=]] J]JJ []< ^" Z_ Fiber Options FX-101 FX-102 ]= [[ ['<== <Z\\Z Type Others ^" Z_ " [_ # + { # ' # Z_ J_ Z< _ FT-H30-M1V-S [ JZ[ (c)' ?+ " FX-500 ' <]j | FT-J8 Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 28 New product introduction Tough Fiber Fiber Selection Guide Ramco Innovations www.SunxSensors.com Liquid Leak / Liquid Detection $ { ' ^#_ ' | Choose by model Choose by shape/ application (800) 280-6933 Applications [! Viewing new models Leak detection for use in semiconductor ! FD-F71 Fibers Super Quality Threaded Type Cylindrical Type Flat Type Small Spot Narrow Beam Wide Beam Type Type Chemicalresistant Heatresistant Vacuumresistant ! ! ! sensor is recommended. ! ! z*! ! {, { ^ "_ { } ^ @@_ FD-FA93 ' =J[] ! ! z! ! {, { ^ "_ { } ^ @@_ FT-F93 { FX-100 series INDEX Earlier models comparison table + Amplifiers (mm) [Z] > @ o6 [=] > @ o4 = > @ o4 ~$ Z *Z= J= %[= ~ " FD-F8Y (mm) = @ [] FD-HF40Y ^" Z_ Z= @ FD-F41Y R10 ^" Z_ 7RXJK FD-F71 @ @+ Z= @ R4 % FX-500 ^% _ FX-101 FX-102 o6 mm =ZJ< = @ ' ['=== J\J= ^ _ $< Z { ' [Z] > ^" [_ { =[] = @ ' ]== [\<] ^ _ { ' [=] > { Z =[] = @ ' ]== [\<] ^ _ $< = > { ' { ] Z= <= > { | | ' | W25 x H13 x D20 FD-F41 R10 For 1 mm thick PFA pipe W25 x H13 x D20 ~ { Others { | { Type FX-500 series FT-F93 + < Fiber Options Type @ [ ==J\ | @ We recommend using the sensor so that the output is ON when liquid is ! Thru-beam Type FD-F4 ^* # = =J[] J[]= ) Liquid Leak / Liquid Detection Fiber Dimensions FD-F41 FD-F41 FD-F4 W6.5 x H28.3 x D17 ~$ Z FD-F4 7RXJK FD-FA93 7RXJK FT-F93 W23 x H20 x D17 R4 Z= @ R2 Z < Z< =ZJ< [=Z ^ _' ' ' ' ' # | [ J ==J\ =[[ { ' { < Z< =ZJ< [=Z @ ^ _ { ' # | [ ==J\ { ' { =J[] ^* # = =J[] J[]= _ @ ^ _' { ' { J [= =[[ =J\ @ ^ _ { ' # | =J [ ==[Z ==J\ { ' { = [== > = = > $= = <= > " [_ # ['=== J\J= Z_ { # !' !' ! 7RXJK $ # | ^ [= ' [=>_ ^ _ Ramco Innovations (800) 280-6933 www.SunxSensors.com 29 New product introduction Tough Fiber Fiber Selection Guide Choose by model Accessories # MS-FD-F7-1 ^? | FD-F71) # MS-FD-F7-2 ^ | FD-F71) Fiber options % Choose by shape/ application Viewing new models Fibers ~ " Super Quality % Threaded Type ! ^"_ @ ! ^"_ MS-FX-01Y MS-FX-02Y { # ! ^"_ ! { + Cylindrical Type Flat Type FD-HF40Y FD-F41Y Small Spot MS-FX-03Y ! | " ! ^MS-FX-YF_ | Narrow Beam Wide Beam Type ! } * MS-FX-01Y MS-FX-02Y MS-FX-03Y Chemicalresistant Heatresistant Union nut Ferrule (MS-FX-YF) Union nut Body Ferrule (MS-FX-YF) Ferrule (MS-FX-YF) Body Union nut Type Body Vacuumresistant Liquid Leak / Liquid Detection Ferrule (MS-FX-YF) Union nut Fiber Options Fiber Dimensions Thru-beam Type Type Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 30 Ramco Innovations Fiber Selection Guide z < { Designation Model No. Description Increases the sensing range by 5 times or more. Ambient temperature: -60 to +350 C -76 to +662 F (Note 3) Beam dia: o3.6 mm o0.142 in Sensing range (mm in) [Lens on both sides] Choose by model Choose by shape/ application Fiber Mode FT-43 Fibers FT-42 FT-42W Super Quality Threaded Type Expansion lens (Note 1) Cylindrical Type FT-45X FX-LE1 FT-R40 Flat Type FT-H35-M2 Small Spot FT-H20W-M1 Type Chemicalresistant Heatresistant @ + Narrow Beam Type FT-H20-M1 FT-H20-J50-S FT-H20-J30-S FT-H20-J20-S Earlier models comparison table 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) (Note 2) 2,400 94.488 3,600 141.732 (Note 2) 1,600 62.992 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) (Note 2) 3,400 133.858 3,600 141.732 (Note 2) 2,200 86.614 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 1,500 59.055 (Note 2) (Note 2) 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) (Note 2) 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) 1,600 62.992 1,600 62.992 (Note 2) (Note 2) 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) (Note 2) 3,600 141.732 1,900 74.803 3,100 122.047 3,300 129.921 1,400 55.118 2,000 78.740 3,500 137.795 1,600 62.992 1,600 62.992 (Note 2) (Note 2) 1,300 51.181 1,600 62.992 (Note 2) 850 33.465 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) (Note 2) 1,200 47.244 (Note 2) (Note 2) 3,500 137.795 2,000 78.740 1,600 62.992 500 19.685 1,000 39.370 (Note 2) (Note 2) (Note 2) 3,500 137.795 (Note 2) FX-500 series Superexpansion lens (Note 1) FX-LE2 FX-101 FX-102 FAST H-SP FT-43 FT-42 FT-42W 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) FT-45X 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,500 137.795 3,500 137.795 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,500 137.795 3,500 137.795 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,600 141.732 3,500 137.795 3,500 137.795 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) FT-R40 FT-H35-M2 FT-H20W-M1 FT-H20-M1 FT-H20-J50-S FT-H20-J30-S FT-H20-J20-S INDEX H-SP STD FT-H13-FM2 FX-100 series FAST LONG Others FX-500 series STD U-LG Mode Type Amplifiers LONG HYPR Fiber Fiber Options Type U-LG Liquid Leak / Liquid Detection Thru-beam Type FX-101 FX-102 HYPR Tremendously increases the sensing range with large diameter lenses. Ambient temperature: -60 to +350 C -76 to +662 F (Note 3) Beam dia: o9.8 mm o0.386 in Sensing range (mm in) [Lens on both sides] Vacuumresistant Fiber Dimensions FX-500 series Viewing new models Wide Beam www.SunxSensors.com Fiber options New product introduction Tough Fiber (800) 280-6933 " [_ ! # + { # ' # Z_ J_ [= Ramco Innovations (800) 280-6933 www.SunxSensors.com Fiber options New product introduction Tough Fiber z < { Designation Model No. Description Fiber Selection Guide Beam axis is bent by 90. Ambient temperature: -60 to +300 C -76 to +572 F (Note 4) Beam dia: o2.8 mm o0.110 in Sensing range (mm in) [Lens on both sides] Mode FT-43 FX-SV1 @ + FT-H35-M2 FT-H20W-M1 FT-H20-M1 FT-H20-J50-S FT-H20-J30-S FT-H20-J20-S Expansion lens for vacuum (Note 1) STD FAST H-SP 3,600 141.732 3,400 133.858 2,600 102.362 1,700 66.929 970 38.189 310 12.205 510 20.079 1,400 55.118 3,600 141.732 3,600 141.732 3,600 141.732 (Note 2) (Note 2) (Note 2) 2,100 82.677 1,150 45.276 370 14.567 500 19.685 1,700 66.929 3,500 137.795 2,700 106.299 1,800 70.866 990 38.976 320 12.598 480 18.898 1,300 51.181 1,600 62.992 1,600 62.992 1,600 62.992 (Note 2) (Note 2) 800 31.496 210 8.268 540 21.260 1,600 62.992 (Note 2) 1,400 55.118 (Note 2) 3,500 137.795 1,600 62.992 1,600 62.992 1,600 62.992 1,200 47.244 780 30.709 500 19.685 150 5.906 280 11.024 800 31.496 Flat Type (Note 2) 1,500 59.055 950 37.402 560 22.047 190 7.480 140 5.512 400 15.748 Small Spot (Note 2) 1,600 62.992 1,600 62.992 (Note 2) (Note 2) 1,300 51.181 780 30.709 500 19.685 150 5.906 280 11.024 840 33.071 740 29.134 450 17.717 290 11.417 80 3.150 150 5.906 410 16.142 Vacuumresistant side-view lens (Note 1) 1,600 62.992 (Note 2) 960 37.795 Fibers HYPR U-LG LONG STD FAST H-SP FT-H30-M1V-S 3,600 141.732 3,600 141.732 (Note 2) (Note 2) 3,400 133.858 1,500 59.055 900 35.433 370 14.567 FX-101 FX-102 450 17.717 1,600 62.992 Beam axis is bent by 90. Ambient temperature: -60 to +300 C -76 to +572 F (Note 4) Beam dia: o3.7 mm o0.146 in Sensing range (mm in) [Lens on both sides] (Note 3) Narrow Beam Wide Beam Type Vacuumresistant Liquid Leak / Liquid Detection Fiber Options FX-500 series Mode HYPR U-LG LONG STD FAST H-SP FT-H30-M1V-S 3,600 141.732 3,600 141.732 (Note 2) (Note 2) 3,400 133.858 1,500 59.055 900 35.433 370 14.567 Fiber Cylindrical Type Heatresistant Mode FV-SV2 Threaded Type Chemicalresistant FX-500 series Fiber Super Quality Type Sensing range increases by 4 times or more. Ambient temperature: -60 to +350 C -76 to +662 F (Note 4) Beam dia: o3.6 mm o0.142 in Sensing range (mm in) [Lens on both sides] (Note 3) FV-LE1 Viewing new models LONG (Note 2) FT-45X FX-101 FX-102 U-LG 3,600 141.732 FT-42W Choose by shape/ application HYPR (Note 2) FT-42 Choose by model FX-500 series Fiber Side-view lens 31 FX-101 FX-102 450 17.717 1,600 62.992 " [_ ! # + { # ' # Z_ J_ FT-H30-M1V-S is 1 m 3.28 ft. The sensing ranges in HYPR, U-LG and LONG of FX-500 series, in <]j take into account the length of the FT-J8 _ [= Fiber Dimensions Thru-beam Type Type Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models comparison table 32 Ramco Innovations z { Designation Model No. Description Fiber Selection Guide Pinpoint spot of o0.5 mm o0.020 in. Enables detection of minute objects or small marks. Pinpoint spot lens Choose by model FX-MR1 Distance to focal point: 6 1 mm 0.236 0.039 in FD-42G, FD-42GW Ambient temperature: -40 to +70 C -40 to +158 F (Note) Choose by shape/ application The spot diameter is adjustable from o0.7 to o2 Sensing range mm o0.028 to o0.079 in according to how much Screw-in depth Distance to focal point Spot diameter # FD-42G, FD-42GW 7 mm 18.5 mm approx. o0.7 mm Ambient temperature:-40 to +70 C 27 mm approx. o1.2 mm 12 mm -40 to +158 F (Note) Spot Accessory: MS-EX3 (mounting bracket) 43 mm approx. o2.0 mm 14 mm diameter Screw-in depth Viewing new models Zoom lens FX-MR2 Distance to focal point Fibers Cylindrical Type Flat Type Small Spot Narrow Beam Wide Beam @ Super Quality Threaded Type www.SunxSensors.com Fiber options New product introduction Tough Fiber (800) 280-6933 Finest spot lens FX-MR3 Distance to focal point Spot diameter Finest spot lens FX-MR6 =[] o0.006 in approx. achieved. FD-EG31, FD-EG30, FD-42G, FD-42GW, FD-32G, FD-32GX Ambient temperature: -40 to +70 C -40 to +158 F (Note) Sensing range =[ o0.004 in approx. achieved. FD-EG31, FD-EG30, FD-42G, FD-42GW, FD-32G, FD-32GX Ambient temperature: -20 to +60 C -4 to +140 F (Note) Sensing range Fiber model No. Distance to focal point Spot diameter Chemicalresistant Heatresistant Screw-in FX-MR2 is converted into a side-view type and depth side-view type FX-MR5 Distance to focal point Vacuumresistant Liquid Leak / Liquid Detection 7.5 0.5 mm o0.3 mm approx. Fiber model No. Distance to focal point Spot diameter FD-EG31 7 0.5 mm o0.1 mm approx. FD-EG30 7 0.5 mm o0.2 mm approx. FD-42G/42GW FD-32G/32GX 7 0.5 mm o0.4 mm approx. Sensing range can be mounted in a very small space. FD-42G, FD-42GW Ambient temperature: -40 to +70 C -40 to +158 F (Note) Zoom lens 7.5 0.5 mm o0.15 mm approx. FD-EG30 FD-42G/42GW 7.5 0.5 mm o0.5 mm approx. FD-32G/32GX Type Type FD-EG31 Screw-in depth Distance to focal point Spot diameter Spot diameter 8 mm 13 mm approx. o0.5 mm 10 mm 15 mm approx. o0.8 mm 14 mm 30 mm approx. o3.0 mm " [[ ' ! ! < !! Fiber Options + one pair set FT-H20-J20, FT-H20-J30, FT-H20-J50, FT-H20-VJ50, FT-H20-VJ80 ' ! ! < !! Fiber Dimensions Thru-beam Type Type + FD-H30W-M1V (one pair set) FD-H30-KZ1V FD-H30-L32V Fiber at atmospheric side FT-J8 (one pair set) Photo-terminal FV-BR1 (one pair set) Mouting bracket for FD-H30-KZ1V(-S) MS-FD-2 Type Others Amplifiers FX-500 series FX-100 series INDEX RF-003 (FR-KZ50E/KZ50H _ RF-13 ^ _ FX-CT1 (Fiber cutter) FX-CT2 (Fiber cutter) FX-CT3 (Fiber cutter) FX-AT2 ^ + ' _ FX-AT3 (Attachment for o2.2 mm o0.087 in ' ) FX-AT4 (Attachment for o1 mm o0.039 in ' |_ FX-AT5 (Attachment for o1.3 mm o0.051 in ' _ FX-AT6 Attachment for o1 mm o0.039 in / o1.3 mm o0.051 in ( ' | } MS-FD-2 (Fiber mounting bracket) Earlier models comparison table RF-003 z! { ) RF-13 FX-AT2 FX-CT1 FX-AT3 MS-FD-2 FX-CT2 FX-AT4 FX-AT5 FX-CT3 FX-AT6 Ramco Innovations (800) 280-6933 www.SunxSensors.com Fiber options New product introduction Others Tough Fiber } Designation Model No. FTP-1000 (1 m 3.281 ft) ) FT-42 FT-42S FT-42W For M4 thread FTP-1500 (1.5 m 4.921 ft) FTP-N500 (0.5 m 1.640 ft) FTP-N1000 (1 m 3.281 ft) For M3 thread FTP-N1500 (1.5 m 4.921 ft) FDP-500 (0.5 m 1.640 ft) FDP-1000 (1 m 3.281 ft) Protective tube @ ( ) For M6 thread FDP-1500 (1.5 m 4.921 ft) FT-43 FT-H13-FM2 Choose by model FT-31 FT-31S FT-31W FD-61 FD-61G FD-61S FD-61W FD-41 FD-41W For M4 thread FD-41S FD-41SW FB-1 radius. (Note 1) Universal sensor mounting stand (Note 2) MS-AJ1-F Horizontal mounting type MS-AJ2-F Vertical mounting type ~ (For M3, ~ ~< _ This joint suppresses false operations { + protective tube. Fiber mounting joint (Note 2) Single core holder MS-FX-01Y MS-FX-02Y Super Quality ! Threaded Type Using the arm which enables adjustment in the horizontal direction, sensing can also be done from above an assembly line. Cylindrical Type 360 rotation 360 rotation 20 20 Angle adjustment: 20 Height adjustment: 150 mm 5.906 in approx. Mounting hole for M6 screw Type Heatresistant Vacuumresistant Forward / back adjustment: 130 mm 5.118 in approx. 20 20 Angle adjustment: 20 RF-230 Wide Beam Chemicalresistant 360 rotation It is available for FR-Z50HW. Refer to P.22 for the sensing range of FR-Z50HW to be used in combination. Narrow Beam Type MS-AJ2-F ! tank. Flat Type Small Spot Forward / back adjustment: 130 mm 5.118 in approx. 360 rotation RF-220 The protective tube can be extended. # + the incident light intensity. (Brown) RF-210 FD-HF40Y FD-F41Y MS-FX-03Y FX-AT15A Fibers MS-AJ1-F Fiber bender Protective tube extension joint (Note 2) Viewing new models The protective tube, made of noncorrosive stainless steel, protects the FD-62 FD-H13-FM2 any external forces. FDP-N1500 (1.5 m 4.921 ft) { # prevention joint (Note 2) Choose by shape/ application FB-1 FD-31 FD-31W FDP-N500 (0.5 m 1.640 ft) FDP-N1000 (1 m 3.281 ft) Fiber Selection Guide Fiber bender ( }< [}< Description FTP-500 (0.5 m 1.640 ft) Protective tube For thru-beam 33 Height adjustment: 150 mm 5.906 in approx. Mounting hole for M6 screw Liquid Leak / Liquid Detection Fiber Options Single core holder " [_ % +# + 2) The joint internal ferrule (MS-FX-YF) is available as a spare part. A distorted ferrule may result in leakage. FX-AT15A Fiber Dimensions Thru-beam Type ! } * MS-FX-01Y MS-FX-02Y MS-FX-03Y Type Type Union nut Others Ferrule (MS-FX-YF) Union nut Body Ferrule (MS-FX-YF) Ferrule (MS-FX-YF) Body Union nut Body Ferrule (MS-FX-YF) Amplifiers FX-500 series Union nut FX-100 series RF-210 RF-220 11 mm RF-230 8.3 mm 8.3 mm 33.3 mm 50.3 mm 35.3 mm INDEX 12.8 mm 42.3 mm 59.3 mm Earlier models comparison table 34 New product introduction Tough Fiber Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) Refer to the FX-500 ^<_' FX-100 ^_ % # # % + ' ' ' " < FT-140 Fiber Selection Guide by model application Free-cut o23 o0.906 19 0.748 o10 o0.394 o10 o0.394 Lens (PMMA) 17 23 0.906 0.669 8 8 3.5 0.315 0.315 0.138 Holder (ABS) Toothed lock washer M14 [Iron(Chromed)] FT-31 Free-cut Cylindrical Type 2 0.079 o6.5 o0.256 2.7 0.106 Flat Type Wide Beam Convergent Reflective Type Retroreflective Type 10 0.394 Vacuum Liquid Leak / Liquid Detection Fiber Fiber [ Thru-beam Type FX-500 0.402 (0.3) (0.012) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Brass(Nickel plated)] FT-31S Free-cut <with FX-AT4> o1 o0.039 2.7 0.106 (o2) (o0.079) Model No. tube (PVC) 10 0.394 40 1.575 5.5 0.217 Allowable 10 bending 10 0.394 range 0.394 o0.88 o0.035 Sleeve [Stainless steel(SUS304)] o0.5 o0.020 fiber core x 1 (Acrylic) Sheath o1 o0.039 (Polyethylene) 5 0.197 2,000 78.740 1.8 0.071 (30) (1.181) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] M3 x 0.5 0.020 Toothed lock washer M3 [Stainless steel(SUS304)] Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Free-cut FT-40 <with FX-AT4> o6.5 o0.256 2.7 0.106 10 0.394 2 5.5 0.079 0.217 2,000 78.740 1.8 0.071 (30)(1.181) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] FT-42 Free-cut 3 0.118 o8.5 o0.335 1 0.039 o2 3.5 0.138 o0.079 <with FX-AT2> o8.5 o0.335 o1 o0.039 (o2)(o0.079)Model No. tube(PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) End bracket [Stainless steel(SUS303)] -0.1 -0.004 o3 o0.118 -0.13 -0.005 Mounting reference surface (Screw periphery) o2 o0.079 M3 x 0.5 0.020 Toothed lock washer M3 [Stainless steel(SUS304)] 3.5 0.138 2,000 78.740 Resin plug(ABS) (o4.33) (20) o2.2 (o0.170) (0.787) o0.087 12 0.472 3 0.118 2.4 0.094 1 0.039 o2 o0.079 (19.7) (0.776) 10.2 0.402 (0.3) (0.012) o2.2 o1.8 (o3.2) (o0.126) Model No. tube (PVC) o0.087 o0.071 Toothed lock washer M4 [Brass(Nickel plated)] o4 o0.157 Mounting reference surface (Screw periphery) End bracket [Brass(Nickel plated)] Opposing faces 7 0.276 thickness 2.4 0.094 [Brass(Nickel plated)] M2.6 x 0.45 0.018 M4 x 0.7 0.028 FT-42S Free-cut <with FX-AT3> <with FX-AT3> 2,000 78.740 12 0.472 2.4 0.094 o2.2 o0.087 (30) (1.181) o1 o0.039 fiber core x 1 (Acrylic) Sheath o2.2 o0.087 (Polyethylene) o4 o0.157 -0.1 0.004 -0.13 0.005 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] (o3.2) (o0.126) Model No. tube (PVC) Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] M2.6 x 0.45 0.018 M4 x 0.7 0.028 FT-42W Free-cut o8.5 o0.335 7 0.276 3.5 0.138 12 0.472 40 1.575 5 Allowable 0.197 10 bending 10 0.394 range 0.394 2,000 78.740 2.4 0.094 o2.5 o0.098 o1.48 o0.058 Sleeve[Stainless steel(SUS304)] M4 x 0.7 0.028 Toothed lock washer M4[Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] o8.5 o0.335 3 7 0.276 0.118 3.5 0.138 1 0.039 12 0.472 2,000 78.740 2.4 0.094 (30) (1.181) o2.2 o0.087 o2.2 o0.087 (30) (1.181) (o3.2)(o0.126) Model No. tube (PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) End bracket[Stainless steel(SUS303)] FT-43 Free-cut <with FX-AT3> FX-100 o1 o0.039 (o2)(o0.079) Model No. tube (PVC) o2 o0.079 End bracket [Stainless steel(SUS303)] Toothed lock washer M3 [Stainless steel(SUS304)] Type (19.7) (0.776) 10.2 o2.2 o1.8 (o2) (o0.079) Model No. tube (PVC) o0.087 o0.071 Toothed lock washer M3 [Brass(Nickel plated)] M3 x 0.5 0.020 o6.5 o0.256 FT-31W Type 10 0.394 o3 o0.118 Mounting reference surface (Screw periphery) End bracket [Brass(Nickel plated)] 2,000 78.740 1.8 0.071 (30) (1.181) o2 o0.079 o3 o0.118 -0.10 -0.004 -0.13 -0.005 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] M3 x 0.5 0.020 Chemical Heat 2,000 78.740 1.8 Resin plug(ABS) 0.071 o1 (o4.33)(o0.170) (20) (0.787) o0.039 <with FX-AT4> Small Spot Narrow Beam o2.2 o0.087 (30) (1.181) Hexagon nut M14 [Brass(Nickel plated)] Super Quality Sleeve <with FX-AT2> 2 o6.5 o0.256 0.079 2.7 0.106 o2 o0.079 10,000 393.701 (o3.2)(o0.126) Model No. tube (PVC) o4.5 o0.177 o1 o0.039 fiber core x 1 (PMMA) o4.5 o0.276 Sheath o2.2 o0.087(Polyethylene) Protector (PVC) M14 x 1 0.039 Threaded Type FT-30 <with FX-AT3> Viewing ! www.SunxSensors.com <with FX-AT3> o8.5 o0.335 7 0.276 3.5 0.138 3 0.118 1 0.039 2,000 78.740 12 0.472 2.4 0.094 (30) (1.181) o2.2 o0.087 INDEX ! table o2 -0.1 -0.004 o4 o0.157 -0.13 -0.005 o0.079 Mounting reference surface (Screw periphery) M2.6 x 0.45 0.018 M4 x 0.75 0.030 Toothed lock washer M4 [Stainless steel(SUS304)] (o3.2)(o0.126) Model No. tube (PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] o2 -0.1 -0.004 o4 o0.157 -0.13 -0.005 o0.079 Mounting reference surface (Screw periphery) M4 x M2.6 x 0.45 0.018 0.7 0.028 Toothed lock washer M4[Stainless steel(SUS304)] (o3.2)(o0.126) Model No. tube (PVC) o1.5 o0.059 fiber core x 1 (PMMA) Sheath o2.2 o0.087(Polyethylene) End bracket[Stainless steel(SUS303)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) www.SunxSensors.com Refer to the FX-500 ^<_' FX-100 ^_ % # # % + ' ' ' " < FT-45X FT-A11 FT-A11W Free-cut 4.2 0.165 (8) (0.315) (13.5) 9.5 0.374 (0.531) 7 19 4 0.157 0.748 Free-cut <with FX-AT5> 4 0.157 27 1.063 2,000 78.740 Beam axis 4 0.157 5.2 0.205 (8)(0.315) o1.3 o0.051 4.2 0.165 (13.5) 9.5 (0.531) 0.374 5 0.197 0.1 57 o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 4R 2-R o0.75 o0.030 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) Center of beam axis 19 0.748 4 19 0.748 0.157 2-o3.2 o0.126 o6.0 o0.236 countersinking (on both sides) Enclosure (PC) (19) (0.748) 16 (20) 0.630 (0.787) 4 2-R FT-A32W Free-cut 157 R0. Sensing face(3.2 x 32)(0.126 x 1.260) Lens(Norbornene resin) 4 0.157 65 2.559 2,000 78.740 Beam axis Enclosure(PC) 5.2 0.205 o1.3 o0.051 7.3 0.287 12 0.472 2-o3.2 o0.126 o6 o0.236 countersinking(on both sides) 45 1.772 FT-AL05 Free-cut <with FX-AT3> <with FX-AT5> Center of beam axis (19) (0.748) 16 (20) 0.630 (0.787) 7 .15 4 R0 2-R Sensing face (3.2 x 32) (0.126 x 1.260) Lens (Norbornene resin) 4 0.157 65 2.559 2,000 78.740 Beam Enclosure(PC) 5.2 axis 0.205 o1.3 o0.051 7.3 0.287 Free-cut 1,000 39.370 15 0.591 2-M3 x 0.5 0.020 15 10 0.394 0.591 o2.2 o0.087 4.5 0.177 o0.25 o0.010 fiber core x 16 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Enclosure(PPS) 5.25 0.207 Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemical Vacuum Liquid Leak / Liquid Detection Fiber FT-E23 Free-cut <with FX-AT4> <with FX-AT4> o1 (30) o0.039 (1.181) 50.5 0.1970.020 15 0.591 50.5 0.1970.020 o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) End bracket [Stainless steel (SUS303)] Details of o3 o0.118 0 0 -0.1 -0.004 sensing part Mounting reference surface (Periphery) (o2) (o0.079) Model No. tube (PVC) End bracket [Stainless steel (SUS303)] o0.25 o0.010 0 0 -0.1 -0.004 1,000 39.370 2,000 78.740 2-o1 o0.039 Beam-emitting side (Gray) 5.5 0.217 6 0.236 9 0.354 Beam-receiving side (Black) o0.25 o0.010 x 4fiber core (PMMA) Sheath o1 o0.039 (Polyethylene) o3.1 o0.122 Protective tube (PFA) o3.1 o0.122 FX-500 FX-100 Free-cut <with FX-AT3> 3.5 0.138 3 0.118 7.2 0.283 6 0.236 Enclosure (ABS) o0.5 o0.020 x 1 fiber core (PMMA) Sheath o1 o0.039 (Polyethylene) FT-H13-FM2 <with FX-AT4> 10.3 0.406 Type 0 0 o4 o0.016 -0.1 -0.004 Free-cut Thru-beam Type Type o0.25 o0.010 fiber core x1 (PMMA) FT-F93 Fiber [ 0 0 Details of (o2) (o0.079) Model No. tube (PVC) o3 o0.118 -0.1 -0.004 sensing part Mounting reference surface (Periphery) o0.125 o0.005 fiber core x 1 (PMMA) 20 0.787 12 0.472 1,000 39.370 o1 (30) o0.039 (1.181) Sleeve [Stainless steel (SUS304)] Sleeve [Stainless steel (SUS304)] 17 0.669 Cylindrical Type Sensing part(o0.25 fiber core o0.010 x 16) FT-E13 23 0.906 Threaded Type Heat 2.5 0.098 2.5 0.098 4.5 Details of 0.177 sensing part 1 0.039 2-o3.2 o0.126 o6 o0.236 countersinking(on both sides) 45 1.772 12 0.472 2,000 78.740 15 0.591 8 0.315 5 0.197 Head block (LCP) o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 5 0.197 Sleeve Lens (Norbornene resin) Sensing face (2.2 x 11) (0.087 x 0.433) 19 0.748 Viewing ! Super Quality FT-A32 Center of beam axis Fiber Selection Guide application o0.75 o0.030 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 2-o3.2 o0.126 o6.0 o0.236 countersinking (on both sides) Enclosure(PC) <with FX-AT5> 8 0.315 Tough Fiber by model 4 0.157 27 1.063 2,000 78.740 Beam axis 4 0.157 o1.3 5.2 0.205 o0.051 15 o2.2 o0.087 (o4)(o0.157) Model No. tube(PVC) Resin plug(ABS) Protective tube Polyolefin tube included SUS304 spiral tube Crimping part Lens(Norbornene resin) Sensing face(2.2 x 11)(0.087 x 0.433) 8 0.315 R0 . o2 o0.079 M4 x 0.7 0.028 Toothed lock washer M4 Details of sensing part [Stainless steel(SUS304)] 3.5 0.138 Opposing faces 7 0.276 thickness 2.4 0.094 End bracket [Stainless steel(SUS304)] [Stainless steel (SUS303)] o1 o0.039 fiber core x 1 (PMMA) o8.5 o0.335 Center of beam axis 2R4 3 0.118 1 0.039 2.4 0.094 M2.6 x 0.45 0.018 7 0.276 1,000 39.370 19.7 0.776 (2.5)(0.098) o2.6 o0.102 (o4.33)(o0.170) (30) 10.2 (1.181) 0.402 New product introduction Free-cut <with FX-AT5> <with FX-AT2> 20 0.787 12 0.472 35 o1.5 o0.059 fiber core x 1 13 0.512 12 0.472 o3 o0.118 M4 x 0.7 0.028 Screw tightening face INDEX 2,000 78.740 o2.2 o0.087 (Fluorine resin) Opposing faces 7 0.276, thickness 2.4 0.094 Toothed lock washer o8.5 o0.335 ! table 36 New product introduction Tough Fiber Ramco Innovations (800) 280-6933 Refer to the FX-500 ^<_' FX-100 ^_ % # # DIMENSIONS (Unit: mm in) % + ' ' ' " < FT-H20-J20-S FT-H20-J30-S FT-H20-J50-S Fiber Selection Guide by model application Viewing ! @+ ^"_ 3 0.118 2.5 0.098 M2.6 x 0.45 0.018 24 A 0.945 Heat & cold-resistant Ordinary temperature specifications specifications Beam axis o4 o0.157 Opposing faces7 0.276, 5.4 o3.5 o0.138 thickness 2.4 0.094 0.213 Lock nut (polycarbonate) Toothed lock washer o2.7 o0.106 Liner + braid tube [Stainless steel (SUS304)] o8.5 o0.335 ! ! z<'{ ! z { B Sleeve 20 0.787 o2.2 o0.087 (o4.0) (o0.157) Model No. tube (PVC) M4 x 0.7 0.028 Opposing faces 7 0.276, o1 o0.039 fiber core x 1 (Acrylic) thickness 3.2 0.126 Outer sheath o2.2 o0.087 (Polyethylene) (Polypropylene) Spring washer [Stainless steel (SUS)] Flat Type Small Spot ~ " A FT-H20-J20-S 200 +25 0 Convergent Reflective Type FT-H20-J30-S 300 +25 [[[[ =\ 0 0 Z] +30 [[ZZ[ [[[ 0 0 FT-H20-J50-S 500 +25 [\<] =\ 0 0 [[[ ] +30 0 [\=\] 0 Liquid Leak / Liquid Detection Fiber Fiber [ 3.5 0.138 2,000 78.740 (25.8) (1.016) 20 17 0.787 0.669 6 0.236 M4 x 0.7 0.028 B 24 0.945 12 0.472 Set screw tightening range o2.2 o0.087 Head [Brass (Nickel plated)] (o4.0) (o0.157) Model No. tube (PVC) Spring washer [Stainless steel (SUS)] Opposing faces 7 0.276, o1 o0.039 fiber core x 1 (Acrylic) thickness 3.2 0.126 Holder Outer sheath o2.2 o0.087 (Polyethylene) (Polypropylene) [Brass (Nickel plated)] Prism (BK7) ~ " A B FT-H20-VJ50-S 500 +25 [\<] =\ 0 0 [\<\ == +50 J[\< 0 0 ] +30 [\=\] [[[ 0 0 +55 ] 0 J=\=< Z[<] 0 FT-H20-VJ80-S <with FX-AT2> 1,000 39.370 150 5.906 16.7 0.657 o5 o0.197 Fixing bracket [Brass (nickel plated)] Screw tightening face M2.6 x 0.45 0.018 M4 x 0.7 0.028 3 0.118 18.3 0.720 3.5 0.138 Fixing plug (PA) Opposing faces 7 0.276, thickness 2.4 0.094 Toothed lock washer o8.5 o0.335 Heat & cold-resistant Ordinary temperature specifications specifications o2.5 o0.098 M2.6 x 0.45 0.018 o0.8 o0.031 fiber core bundle x 1 1,000 39.370 M4 x 0.7 0.028 o1.6 o0.063 150 5.906 19.5 0.768 10 0.394 o2.2 o0.087 o4.33 o0.170 (PA) Protective tube (PTFE) Opposing faces 7 0.276, thickness 2.4 0.094 Toothed lock washer o8.5 o0.335 FT-H35-M2 1,000 39.370 30 1.181 17 0.669 o4 o0.157 4 0.157 End bracket [Stainless steel (SUS)] Toothed lock washer o7.6 o0.299 [Stainless steel (SUS)] 27 1.063 3 0.118 30 1.181 Opposing faces 7 0.276, thickness 3.2 0.126 [Stainless steel (SUS)] Screw tightening face 20 0.787 o2.2 o0.087 FT-H30-M1V-S M2.6 x 0.45 0.018 M4 x 0.7 0.028 11 0.433 o3.6 o0.142 17 0.669 o4 o0.157 Mounting cap nut opposing faces 8 0.315 [Stainless steel (SUS)] Joint [Stainless steel (SUS)] Liner+braid tube [Stainless steel (SUS)] 2,000 78.740 Heat & cold-resistant Ordinary temperature specifications specifications M2.6 x 0.45 0.018 M4 x 0.7 0.028 o1.2 o0.047 fiber core bundle x 1 150 5.906 16.7 0.657 18.3 0.720 o2.2 o2.9 o0.114 o0.087 [Stainless steel (SUS)] Fixing plug (PA) o4 o0.157 [Stainless steel (SUS)] o5 o0.197 Fixing bracket [Brass (Nickel plated)] Opposing faces 7 0.276, thickness 2.4 0.094 [Stainless steel (SUS)] Toothed lock washer o8.5 o0.335 [Stainless steel (SUS)] " FT-H30-M1V-S is a set with the FT-H30-M1V, photo-terminal FV-BR1' FT-J8 ][ + FT-H35-M2S6 FT-HL80Y 60 2.362 27 1.063 INDEX o1.2 o0.047 fiber 5 core bundle x 1 0.197 ! table 8 0.315 2.2 0.087 " ^FT-FM2_ o2.9 o0.114 (Silicone) o4 o0.157 [Brass (Nickel plated)] FX-100 o3.5 o0.138 5.4 0.213 Lock nut (polycarbonate) ! ! z<'{ ! z { Heat & cold-resistant Ordinary temperature specifications specifications 12 0.472 o1.1 o0.043 fiber core bundle x 1 3 0.118 2.5 0.098 9.3 0.366 FT-H20W-M1 20 0.787 3 0.118 Type FX-500 Z [[[ 0 FT-H20-M1 Thru-beam Type Type =\ 0 " ^FT-FM2_ Vacuum o2.7 o0.106 Liner + braid tube [stainless steel (SUS304)] Joint bracket [Brass (nickel plated)] B [] +30 0 Wide Beam Heat (100) (3.937) o3.8 o0.150 2,000 78.740 (25.8) (1.016) 17 0.669 6 0.236 Cylindrical Type Chemical @+ ^"_ <with FX-AT3> 23 0.906 A 12 Joint bracket 0.472 [Brass (nickel plated)] Heat & cold-resistant Ordinary temperature specifications specifications 9.3 o4 o0.157 (100) (3.937) 0.366 Threaded Type Retroreflective Type FT-H20-VJ80-S < !! z!{ < !! z!{ Narrow Beam FT-H20-VJ50-S <with FX-AT3> M4 x 0.7 0.028 End bracket [Brass (nickel plated)] Super Quality www.SunxSensors.com o2.1 o0.083 [Stainless steel (SUS)] o3 o0.118 [Stainless steel (SUS)] M4 x 0.7 0.028 [Stainless steel (SUS)] 17 0.669 Free-cut <with FX-AT3> 2,000 78.740 Heat & cold-resistant Ordinary temperature specifications specifications 150 5.906 16.7 0.657 18.3 0.720 o2.2 o5 o0.197 Fixing bracket o0.087 [Brass (nickel plated)] o2.9 o0.114 [Stainless steel (SUS)] Fixing plug (PA) o4 o0.157 [Stainless steel (SUS)] Opposing faces 7 0.276, thickness 2.4 0.094 [Stainless steel (SUS)] Toothed lock washer o8.5 o0.335 [Stainless steel (SUS)] (25) (0.984) o5.5 o0.217 1,500 59.055 2,000 78.740 500 19.685 (Allowable cutting range) o2.2 o0.087 (o4) (o0.157) protective tube (Fluorine resin) Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) www.SunxSensors.com Refer to the FX-500 ^<_' FX-100 ^_ % # # % + ' ' ' " < FT-KS40 Free-cut FT-KV26 8 0.315 2,000 78.740 (Set screw tightening range) (30) o1 o0.039 (1.181) Beam axis (o2) (o0.079) Model No. tube(PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) o3.5 o0.138 o3.7 o0.146 Holder(PC) End bracket [Stainless steel(SUS303)] 1.5 1.3 0.059 0.051 Tough Fiber (0.5) (0.020) Prism(PC) 2,000 78.740 4-C0.15 C0.006 (30) (1.181) End bracket [Stainless steel (SUS303)] 2 0.079 Fiber Selection Guide by model Mounting reference surface 20 0.787 18 0.709 39 o1 0.0 o Beam axis 1.7 0.067 New product introduction Free-cut <with FX-AT4> <with FX-AT4> 20 0.787 37 o1 o0.039 application Viewing ! (o2)(o0.079)Model No. tube(PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) FT-KV40, FT-KV40W Free-cut FT-L80Y Free-cut o o0 4 .15 7 <with FX-AT4> 2,000 78.740 25 0.984 3.7 0.146 Prism(PC) (25) (0.984) o1 o0.039 (30) (1.181) 3 0.118 o2.5 o0.098 Holder (PC) <with FX-AT3> (o2)(o0.079) Model No. tube (PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) Enclosure (LCP) 1,500 59.055 2,000 78.740 500 19.685 (Allowable cutting range) Prism (PC) 3 0.118 3.3 0.130 o2.2 o0.087 (o4) (o0.157) protective tube (Fluorine resin) o5.5 o0.217 Small Spot Wide Beam Convergent Reflective Type o1 o0.039 Retroreflective Type Chemical 2.5 R0. Enclosure (LCP) 5 0.197 5 0.197 2-R C1 C0.039 098 Mounting bracket [Stainless steel(SUS304)] 4.1 0.161 Narrow Beam (o2)(o0.079) Model No. tube(PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) R 6.5 0.256 4.7 0.185 o2.5 o0.098 6.5 0.256 Holder (PC) Cylindrical Type Sleeve 2,000 78.740 3.2 0.126 3.2 0.126 (30) 3.3 (1.181) 0.130 Threaded Type Flat Type Assembly dimensions with MS-FD-3 (attached mounting bracket) 25 0.984 10 0.394 Super Quality Heat Vacuum FT-R40 Free-cut FT-R41W Free-cut <with FX-AT3> <with FX-AT3> Liquid Leak / Liquid Detection 2,000 78.740 o1.2 o0.047 Stainless pipe [Stainless steel(SUS304)] 2.4 0.094 25 0.984 20 0.787 o2.7 o0.106 (30) (1.181) 5 90 97 .1 9 R0 .03 R5 1 0 1 0.039 3 0.118 9 0.354 Enclosure [Zinc die-cast (ZDC2)] 7 0.276 5 0.197 12 0.472 o2.2 o0.087 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) (o3.2) (o0.126) Model No. tube (PVC) Fixing bracket [Stainless steel(SUS303)] Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] o2 o0.079 -0.004 o4 o0.157 -0.1 -0.13 -0.005 Mounting reference surface (Screw periphery) 4.4 0.173 1 0.039 9.5 0.374 8 0.315 2.4 0.094 M4 x 0.7 0.028 7 0.276 o8.5 o0.335 3.2 0.126 Fiber 2,000 78.740 6 0.236 (30) (1.181) (o3.2) (o0.126) Model No. tube (PVC) Toothed lock washer M4[Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] o2.2 o0.087 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) M4 x 0.7 0.028 M2.6 x 0.45 0.018 o8.5 o0.335 Fiber [ Thru-beam Type Type Type 7 0.276 3.2 0.126 FT-R42W Free-cut FT-S11 <with FX-AT3> 7 0.276 8 0.315 2.4 0.094 M4 x 0.7 0.028 Enclosure [Zinc die-cast (ZDC2)] 6 0.236 4.4 0.173 1 0.039 10 0.394 0.5 0.020 Lens (PMMA) o8.5 o0.335 3.2 0.126 9 0.354 3 Set screw tightening range 0.118 2,000 78.740 (30) (1.181) (o3.2) (o0.126) Model No. tube (PVC) Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] 7 0.276 <with FX-AT2> o2.2 o0.087 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) 6 0.236 o1 o0.039 End bracket [Stainless steel(SUS303)] o0.25 o0.010 fiber core x 1 (PMMA) Sheath o0.7 o0.028 (Polyethylene) FX-500 FX-100 500 19.685 19.5 0.768 (30) (1.181) 10 0.394 o2.2 o0.087 (o4.33) (o0.170) Resin plug (PA) (o1.5) (o0.059) Model No. tube (PVC) INDEX ! table 38 New product introduction Tough Fiber Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) Refer to the FX-500 ^<_' FX-100 ^_ % # # % + ' ' ' " < FT-S20 FT-S21 Fiber Selection Guide by model application Super Quality 2,000 78.740 Resin plug (ABS) (20) (0.787) 8 0.315 2 0.079 Set screw 3 tightening range 0.118 o1 o0.039 o1 o0.039 10.2 0.402 (0.3) (0.012) 2 0.079 8 0.315 2,000 78.740 3 0.118 (Set screw tightening range) o1 o0.039 (30) (1.181) o1.5 o0.591 -0.07 -0.003 -0.1 -0.004 Mounting reference surface (Periphery) (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 Fiber core x 1 (Acrylic) Sheath o1.0 o0.039 (Polyethylene) End bracket [Stainless steel(SUS303)] FT-S21W Free-cut FT-S30 <with FX-AT4> Cylindrical Type 8 0.315 2 0.079 (30) (1.181) Flat Type <with FX-AT2> 2,000 78.740 (Set screw tightening range) 3 0.118 Sleeve Narrow Beam (19.7) (0.776) o1 (o4.33)(o0.170) o2.2 o1.8 o0.039 o0.087 o0.071 (o2) (o0.079) Model No. tube (PVC) o1.5 o0.591 Mounting reference surface (Periphery) End bracket [Stainless steel(SUS303)] Threaded Type Small Spot Free-cut <with FX-AT4> <with FX-AT2> Viewing ! www.SunxSensors.com o1 o0.039 2 0.079 o1 o0.039 Mounting reference surface (Screw periphery) 2,000 78.740 Resin plug (ABS) (20) (0.787) 8 0.315 o2 o0.079 (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) End bracket [Stainless steel(SUS303)] -0.003 o1.5 o0.059 -0.07 -0.1 -0.004 Set screw 5 tightening range 0.197 (19.7) (0.776) 10.2 0.402 (0.3) (0.012) (o4.33)(o0.170) o2.2 o1.8 o2.2 o0.087 o0.087 o0.071 (o3.2) (o0.126) Model No. tube (PVC) o3 o0.118 Mounting reference surface (Periphery) End bracket [Stainless steel(SUS303)] Wide Beam Convergent Reflective Type FT-S31W Free-cut Retroreflective Type Chemical Liquid Leak / Liquid Detection Free-cut <with FX-AT3> 8 2,000 78.740 0.315 (Set screw tightening range) 5 o2.2 o0.087 0.197 (30)(1.181) 2 0.079 Heat Vacuum FT-S32 <with FX-AT3> Screw tightening range (excluding crimping part) o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Mounting reference surface (Periphery) o2 o0.079 2,000 78.740 End bracket [Stainless steel(SUS303)] o2.2 o0.087 2 0.079 o2 o0.079 (o3.2) (o0.126) Model No. tube(PVC) -0.003 o3 o0.118 -0.07 -0.1 -0.004 8 0.315 (30) (1.181) Lens (PMMA) o2.5 o0.098 End bracket [Stainless steel(SUS303)] Crimping part (o3.2)(o0.126) Model No. tube (PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Fiber FT-V23 Free-cut Fiber [ Type 1.8 0.071 View A 1.1 0.043 o o0 0.8 .0 31 Thru-beam Type Type FX-500 FX-100 Free-cut 10 0.394 Set screw tightening range <with FX-AT4> View A 15 0.591 20 0.787 o1 o0.039 A o2 o0.079 Sleeve [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] 2,000 78.740 (30) o1.3 o0.051 (1.181) (o2.5) (o0.098) Model No. tube (PVC) o0.75 o0.030 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) FT-V25 Free-cut Set screw tightening range Beam axis 15 0.591 o1 A o0.039 15 0.591 o2 o0.079 2,000 78.740 (30) (1.181) o1 o0.039 (o2) (o0.079) Model No. tube (PVC) Sleeve[Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) FT-V30 Free-cut <with FX-AT4> View A 1.8 0.071 o o0 0.5 .0 5 22 10 0.394 Set screw tightening range <with FX-AT3> 1.3 0.051 View A 2.3 0.091 3 .1 Beam axis 4 0.0 o 15 0.591 o2 o0.079 A 2,000 78.740 (30) o1 o0.039 (1.181) A o1 o0.039 End bracket [Stainless steel(SUS303)] (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) 10 Set screw tightening range 0.394 Beam axis o1 15 0.591 Sleeve [Stainless steel(SUS304)] ! table 10 0.394 1.8 0.071 1 0.039 2 0.02 55 o o0. Beam axis 1 0.039 INDEX FT-V24W <with FX-AT5> 20 0.787 o1.5 o0.059 o2.5 Sleeve [Stainless steel(SUS304)] o0.098 End bracket [Stainless steel(SUS303)] 15 0.591 2,000 78.740 (30) (1.181) o2.2 o0.087 (o3.2) (o0.126) Model No. tube(PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) Refer to the FX-500 ^<_' FX-100 ^_ % # # % + ' ' ' " < FT-V40 Free-cut FT-V80Y <with FX-AT3> 7 o o0 4 .1 5 25 0.984 3.7 0.146 3 0.118 (8) (0.315) 12 0.472 o2.5 o0.098 o2.2 o0.087 (25) (0.984) 4.5 0.177 Tough Fiber Beam axis mark Fiber Selection Guide by model 500 19.685 (Allowable cutting range) application Viewing ! o2.2 o0.087 (o4) (o0.157) protective tube (Fluorine resin) o5.5 o0.217 Sensing part (o3.2) (o0.126) Model No. tube (PVC) o0.75 o0.030 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] Window name plate (Polyester) Holder (PC) 2,000 78.740 1,500 59.055 2,000 78.740 (Set screw tightening range) (30) (1.181) New product introduction Free-cut <with FX-AT3> Prism (PC) 39 www.SunxSensors.com Super Quality FT-WZ4 Free-cut FT-WZ7 Free-cut <with FX-AT4> 3.5 2 0.079 0.138 1.2 0.047 0.5 0.020 7 0.276 3.5 0.138 7 0.276 3.5 0.138 1.2 0.047 2,000 78.740 o3.2 o0.126 hole, o5.6 o0.220 spot facing, 2.2 0.087 deep Inner pipe [Stainless Steel (SUS)] (20 0.787) o1 o0.039 Prism (Acrylic) 7 0.276 14 3.5 0.551 0.138 A o1.3 o0.051 (o2 o0.079) Model No. tube (PVC) Beam axis View A o5 o0.020 A Multi-core fiber (Fiber core: Acrylic, Sheath: Polyethylene) 1.05 0.041 o2.4 Enclosure o0.094 (Polycarbonate) o1 View A o0.039 Multi-core fiber o0.0375 o0.001 x 151 Prism (Acrylic) Beam axis (o2) (o0.079) Model No. tube (PVC) Multi-core fiber (Fiber core: Acrylic, Sheath: Polyethylene) Free-cut 0.5 0.020 2 0.079 1.05 0.041 10 1,000 39.370 0.394 3.5 0.138 4-R1 R0.039 FT-Z30 Free-cut <Left> o1.5 o0.059 Beam axis o0.75 o0.030 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) Enclosure (PC) 10 0.394 2.5 (o2.0) (o0.079) Model No. tube (PVC) 0.098 Inner pipe [Stainless steel(SUS304)] 1 o0.5 o0.020 fiber core x 1 (PMMA) 7 0.039 2.1 Sheath o1 o0.039 (Polyethylene) 0.083 0.276 5 0.197 <with FX-AT5> Enclosure(PC) o1 (30) (1.181) o0.039 Beam axis 0.5 3 0.118 0.020 1.75 0.069 8.5 3.9 0.154 0.335 (o2.5) (o0.098) Model No. tube (PVC) 11 0.433 0.5 0.020 7.5 2-o2.2 o0.087 Hole 0.295 (30) (1.181) 5.5 0.217 2.2 0.087 12 Reflector (PC) 0.472 0.6 0.024 o1.3 o0.051 Free-cut 12 0.472 3.4 11 0.433 0.134 3 0.118 8 0.315 3.5 0.138 Beam axis 2 0.079 Reflector (PMMA) 1.75 0.069 Lens (PMMA) 2,000 78.740 (30) (1.181) o1.3 o0.051 Reflector (PC) 2.2 0.087 8.5 0.335 (o2.5) (o0.098) 5.5 0.217 7.5 0.295 12 0.472 5.5 0.217 2,000 78.740 o1.3 2-o2.2 o0.087 Hole o0.051 (30) (1.181) (o2.5) (o0.098) Model No. tube (PVC) 3.9 0.154 (o2.5) (o0.098) Model No. tube (PVC) Enclosure (PC) Retroreflective Type Chemical Heat Vacuum Liquid Leak / Liquid Detection Thru-beam Type (o2.5) (o0.098) 4.3 o0.75 o0.030 fiber core x 1 (PMMA) 0.169 1.75 7.5 Sheath o1.3 o0.051 (Polyethylene) 3 0.069 0.295 0.118 0.5 0.5 0.020 0.020 11 0.433 Beam axis Enclosure (PC) o0.75 o0.030 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 2-o2.2 o0.087 Hole Narrow Beam Fiber [ <Right> <with FX-AT5> Small Spot Fiber (o2.5) (o0.098) 4.3 0.169 2,000 78.740 Center of beam axis FT-Z30E Flat Type Convergent Reflective Type <with FX-AT4> o2.2 o0.087 Hole, o3.6 o0.142 spot facing deep 1.4 0.055 Cylindrical Type Wide Beam 1.05 0.041 Multi-core fiber o0.075 o0.003 x 151 FT-Z20HBW Threaded Type Sleeve (20 0.787) 10 0.394 o1.5 Enclosure o0.059 (Polycarbonate) 1 0.039 1,000 39.370 o2.2 o0.087 hole, o3.6 o0.142 spot facing, 1.4 0.055 deep Inner pipe [Stainless steel (SUS)] 2.5 0.098 5 0.197 <with FX-AT5> Type Type FX-500 FT-Z30EW Free-cut FT-Z30H Free-cut <with FX-AT5> 3 0.118 12 2-o2.2 o0.087 0.472 3.4 11 Hole 0.433 0.134 8 0.315 3.5 0.138 2 0.079 Reflector (PMMA) 1.75 0.069 Lens (PMMA) 2,000 78.740 (30) (1.181) o1.3 o0.051 <with FX-AT5> 3 0.118 (o2.5) (o0.098) o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) Beam axis 5.5 0.217 7.5 0.295 (o2.5) (o0.098) Model No. tube (PVC) Enclosure (PC) 8 0.315 Lens (PMMA) Beam axis 12 0.472 3.4 11 0.433 0.134 3.5 0.138 5.5 2 0.079 0.217 7.5 1.75 0.295 0.069 Enclosure (PC) 2,000 78.740 (30) (1.181) o1.3 o0.051 (o2.5) (o0.098) FX-100 INDEX o0.75 o0.030 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 2-o2.2 o0.087 Hole (o2.5) (o0.098) Model No. tube (PVC) ! table 40 New product introduction Tough Fiber Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) Refer to the FX-500 ^<_' FX-100 ^_ % # # % + ' ' ' " < FT-Z30HW Free-cut Fiber Selection Guide by model FT-Z30W Free-cut <with FX-AT5> 12 0.472 2,000 78.740 (30) 3.4 (1.181) 11 0.433 0.134 (o2.5)(o0.098) o1.3 o0.051 3 0.118 application Viewing ! www.SunxSensors.com 8 0.315 Beam 3.5 0.138 axis <Left> o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 2 0.079 5.5 0.217 Lens (PMMA) 2-o2.2 o0.087 Hole 7.5 0.295 1.75 0.069 <with FX-AT5> 3 0.118 Enclosure (PC) Beam axis 11 0.433 0.5 0.020 7.5 1.75 0.069 0.295 8.5 0.335 Enclosure (PC) Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam FT-Z40HBW Free-cut <with FX-AT5> Beam axis Wide Beam o1 o0.039 x 1 fiber core (PMMA) 0.6 Sheath o1.3 o0.051 (Polyethylene) 0.024 Convergent Reflective Type Retroreflective Type FT-Z802Y Free-cut Chemical Heat Vacuum Liquid Leak / Liquid Detection <with FX-AT3> 4 0.157 3 0.118 2-o3.2 o0.126 (7.3) (0.287) 13 0.512 (1) (0.039) Fiber Fiber [ Thru-beam Type Type Type FX-500 FX-100 INDEX ! table 2,000 78.740 (5.8) (0.228) 15 0.591 7.5 0.295 6 0.236 7 0.276 Beam axis o2.2 o0.087 0.5 0.020 (30) (1.181) 4.3 0.169 (o2.5) (o0.098) o1.3 o0.051 2-o2.2 o0.087 Hole Reflector(PC) 2.2 0.087 Center of beam axis <Right> Reflector(PC) 2.2 0.087 o3.2 o0.126 Hole, o5.6 o0.220 11 2,000 78.740 spot facing deep 2.2 0.087 0.433 3.5 0.138 4-R1 R0.039 1 0.039 3.5 0.138 Enclosure (PC) 1.05 0.041 (30) o1.3 o0.051 3.5 0.138 (1.181) 7 14 0.276 0.551 (o2.5) (o0.098) Model No. tube (PVC) 1.6 Inner pipe [Stainless steel(SUS304)] 0.063 7 2.7 0.106 o2.4 o0.094 0.276 (o2.5) (o0.098) Model No. tube (PVC) 3.9 0.154 (o2.5) (o0.098) Model No. tube (PVC) Super Quality o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 8.5 0.335 3 0.118 3.9 0.154 5.5 0.217 12 0.472 12 0.472 5.5 0.217 2,000 78.740 2,000 78.740 2-o2.2 o0.087 Hole (30) (1.181) o1.3 o0.051 (o2.5) (o0.098) 4.3 o1 o0.039 fiber core x 1 (PMMA) 7.5 0.169 Sheath o1.3 o0.051 (Polyethylene) 0.295 0.5 0.020 11 0.433 Enclosure (PC) Beam axis (o2.5) (o0.098) Model No. tube (PVC) 1.75 0.069 0.5 0.020 Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) www.SunxSensors.com Refer to the FX-500 ^<_' FX-100 ^_ % # # % + ' ' ' " FR-KZ22E Free-cut FR-KZ50E <with FX-AT4> Fiber 15.8 0.622 14.7 0.579 0.7 0.028 1.45 0.057 5.2 0.205 2-M1.4 x 0.3 0.012 (o2) (o0.079) Model No. tube (PVC) Prism (PC) Base (ABS) Enclosure (ABS) Reflector (PMMA) 11.2 0.441 2,000 78.740 (30) 2-o1 o0.039 (1.181) (3.7) (0.146) 3.7 0.146 9.5 0.374 Mounting bracket [Stainless steel(SUS303)] 11 9 7.5 0.433 0.354 0.295 2.2 0.087 25 0.984 3 0.118 1.95 0.077 5 0.197 2,000 78.740 21.5 0.846 7.5 .039 0.295 ) o0 1.5 (2-o1 0.059 2 0.079 2 0.079 (30) (1.181) ! '<[<z! { 2-o1 o0.039 Beam-receiving side (Black) Beam-emitting 2 0.079 4 side (Gray) 0.157 (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) Head block [Stainless steel(SUS303)] 2-M1.4 x 0.3 0.012 4 0.157 1.9 0.075 0.7 0.028 Prism (PC) 1.5 0.059 2 0.079 5 0.197 9 4 0.157 0.354 9.5 0.374 (3.7) (0.146) (30) (1.181) 21 0.827 3.7 0.146 2,000 78.740 (30) 2-o1 o0.039 (1.181) (3.7) (0.146) Beam axis Beam axis (3.7) (0.146) 12.2 3.7 0.146 0.480 Small Spot Narrow Beam 5.2 0.205 o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) (Accessory for FR-KZ50E_ 10.1 0.398 Retroreflective Type 10.6 0.417 5 0.197 1.1 0.043 10 0.394 (Effective reflector width) 19 28 1.102 0.748 10 0.394 (Effective reflector width) (2-R) Reflector (Norbornene resin) 1 0.039 Cover[Stainless steel (SUS304)] 3.2 0.126 6 0.236 Beam axis RF-003 4 0.157 14 0.551 7 0.276 2-M3 x 0.5 0.020 MS-FD-2 Mounting bracket [Stainless steel(SUS304)] 5.2 0.205 Fiber Fiber o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) 1 0.039 15 0.591 10.6 0.417 Beam axis 10 0.394 (Effective reflector width) Type 10 0.394 (Effective reflector width) Reflector (Norbornene resin) 3.2 0.126 1 0.039 4.3 0.169 Type 2-o2.2 o0.087 5.2 0.205 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) ! '<[<z! { Lens (BK7) 4.6 0.181 (2-R) Fiber [ Thru-beam Type 2,000 78.740 Enclosure(PC) (Accessory for FR-KZ50H_ 5 0.197 1.1 0.043 Cover[Stainless steel (SUS304)] Free-cut <with FX-AT3> 4.6 0.181 9.5 0.374 Enclosure(ABS) 28 19 1.102 0.748 Liquid Leak / Liquid Detection 4.3 0.169 FR-Z50HW Lens (BK7) 10.1 0.398 (2-R) Vacuum 3.3 0.130 4 0.157 3.3 0.130 Chemical Heat (o2) (o0.079) Model No. tube (PVC) 1.2 0.047 Wide Beam Convergent Reflective Type Enclosure(ABS) RF-003 o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) 2,000 78.740 (30) 2-o1 o0.039 (1.181) Threaded Type Flat Type 2-M3 x 0.5 0.020 MS-FD-2 Mounting bracket [Stainless steel(SUS304)] 4 0.157 14 0.551 7 0.276 ! '<[<z! { 21 0.827 Super Quality 3.3 0.130 3.3 0.130 1.2 0.047 (2-R) 10.2 0.402 Viewing ! Sleeve 10.2 0.402 4 0.157 5 0.197 (o2) (o0.079) Model No. tube (PVC) Enclosure (ABS) 5 0.197 application Cylindrical Type Prism (PC) 9.5 0.374 by model (o2) (o0.079) Model No. tube (PVC) <with FX-AT4> 5.2 0.205 2-o1 o0.039 12.2 3.7 0.146 0.480 Free-cut Fiber 2,000 78.740 25 0.984 3 0.118 6 0.236 FR-KZ50H 9.5 0.374 Fiber Selection Guide Beam axis 2 0.079 Tough Fiber o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) Beam axis Fiber 1 0.039 New product introduction Free-cut <with FX-AT4> 41 9.5 0.374 12.2 0.480 5 0.197 10.2 0.402 4 0.157 6 0.236 Beam axis 14 0.551 7 0.276 FX-100 MS-FD-2 Mounting bracket [Stainless steel(SUS304)] 4 0.157 2-o2.2 o0.087 Enclosure(PC) 5.2 0.205 RF-13 FX-500 3.3 0.130 3.3 0.130 1.2 0.047 1 0.039 2,000 78.740 15 0.591 2-M3 x 0.5 0.020 INDEX o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) (Accessory for FR-Z50HW_ 0.5 0.020 30 1.181 30 1.181 Rear surface (pressure-sensitive adhesive) Reflective surface (Acrylic) ! table 42 Ramco Innovations % + ' ' ' " FD-30 Fiber Selection Guide 2 o6.5 0.079 o0.256 2.7 0.106 o2 o0.079 application Super Quality FD-31 Free-cut <with FX-AT2> by model Viewing ! www.SunxSensors.com Refer to the FX-500 ^<_' FX-100 ^_ % # # DIMENSIONS (Unit: mm in) New product introduction Tough Fiber (800) 280-6933 10 0.394 o3 o0.118 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS)] 2,000 78.740 Resin plug(ABS) 1.8 0.071 (20) (0.787) o6.5 o0.256 (19.7) (0.776) 10.2 0.402 o1 M3 x 0.5 o0.039 (o4.33) 0.020 (o0.170) Toothed lock washer M3 [Stainless steel(SUS)] o2.2 o1.8 o0.087 o0.071 (o2) (o0.079) Model No. tube (PVC) FD-31W Free-cut o6.5 o0.256 5.5 0.217 Sleeve 2 0.079 10 0.394 2.7 0.106 Flat Type 1.8 0.071 o2 End bracket o0.079 [Stainless steel(SUS303)] (o2) (o0.079) Model No. tube (PVC) M3 x 0.5 0.020 Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Narrow Beam Free-cut <with FX-AT6> 17 0.669 12 0.472 1.2 0.047 2,000 78.740 o1 o0.039 Beam-emitting side 30 1.181 1.8 0.071 (o2) (o0.079) Model No. tube(PVC) Beam-receiving side o2.3 o0.091 Details of M3 x 0.5 sensing part 0.020 2.8 0.110 o3 o0.118 Sheath o1.3 o0.051 o1.3 o0.051 (Polyethylene) End bracket [Stainless steel(SUS303)] Sheath o1 o0.039 (Polyethylene) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Toothed lock washer M3 [Stainless steel(SUS304)] Beam-receiving o0.25 o0.010 fiber core x 9 (PMMA) Beam-emitting o0.5 o0.020 fiber core x 1 (PMMA) Convergent Reflective Type FD-32GX Free-cut FD-40 <with FX-AT6> Chemical 18 0.709 12 0.472 1.2 0.047 o4.5 o0.177 o2.3 o0.091 Heat Fiber M3 x 0.5 0.020 Toothed lock washer M3 [Stainless steel(SUS304)] o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) Toothed lock washer M3 [Stainless steel(SUS304)] Wide Beam Liquid Leak / Liquid Detection o0.5 o0.020 Fiber core x 1 (Acrylic) Sheath o1 o0.039 (Polyethylene) FD-32G o6.5 o0.256 5.5 0.217 2,000 78.740 (30) (1.181) 2-o1 o0.039 Small Spot Vacuum (o2) (o0.079) Model No. tube (PVC) o3 o0.118 -0.1 -0.004 -0.13 -0.005 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] <with FX-AT4> Cylindrical Type o1 o0.039 (30) (1.181) 1.8 0.071 o2 o0.079 Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Threaded Type Retroreflective Type 2,000 78.740 10 0.394 2.7 0.106 (0.3) (0.012) <with FX-AT4> 2 0.079 o6.5 o0.256 5.5 0.217 (2.5) (0.098) o3.8 o0.150 1,000 39.370 300 11.811 6 0.236 (2.5) (0.098) (30) (1.181) Crimping part Crimping part 12 0.472 o8.5 0.079 o0.335 3.5 0.138 o2.5 o0.098 (19.7) (0.776) 10.2 0.402 (0.3) (0.012) Beam-receiving side Sheath o1 o0.039 (Polyethylene) Sheath o1.3 o0.051 (Polyethylene) Intermediate fixing bracket [Stainless steel(SUS303)] (o5.1) (o0.201) Model No. tube(PVC) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] 2 700 27.559 (Allowable cutting range) o4.5 o1 Beam-emitting o0.177 o0.039 side o1.3 o0.051 M3 x 0.5 0.020 End bracket [Stainless steel (SUS303)] Toothed lock washer M3[Stainless steel (SUS304)] <with FX-AT2> 2,000 78.740 Resin plug(ABS) 2.4 (20) 0.094 (0.787) o4 o0.157 Mounting reference surface (Screw periphery) End bracket [Brass(Nickel plated)] Opposing faces 7 0.276 thickness 2.4 0.094 [Brass(Nickel plated)] M4 x 0.7 0.028 o2.2 o1.8 o1 o0.087 o0.071 o0.039 (o4.33) (o0.170) (o2) (o0.079) Model No. tube (PVC) Toothed lock washer M4 [Brass(Nickel plated)] Protective tube (Polyolefin tube included SUS304 spiral tube) Details of sensing part Fiber [ Beam-receiving o0.25 o0.010 fiber core x 9 (PMMA) Beam-emitting o0.5 o0.020 fiber core x 1 (PMMA) Thru-beam Type Type Type FD-41 Free-cut 2 0.079 o8.5 o0.335 3.5 0.138 FX-500 FX-100 INDEX FD-41S Free-cut <with FX-AT4> 2,000 78.740 12 0.472 2.4 0.094 o2.5 o0.098 (30) (1.181) o1 o0.039 (o2) (o0.079) Model No. tube (PVC) -0.1 -0.004 o4 o0.157-0.13 -0.005 o0.5 o0.020 Fiber core x 1 (Acrylic) Sheath o1 o0.039 (Polyethylene) Mounting reference surface (Screw periphery) End backet [Stainless steel(SUS303)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] Toothed lock washer M4 [Stainless steel(SUS304)] M4 x 0.7 0.028 FD-41SW Free-cut <with FX-AT4> o8.5 o0.335 7 0.276 3.5 10 0.138 0.394 40 1.575 12 0.472 5 Allowable 10 0.197 bending 0.394 range o2.5 o0.098 M4 x 0.7 0.028 Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] o1.48 o0.058 Sleeve [Stainless steel(SUS304)] 2,000 78.740 2-o1 (30) o0.039 2.4 0.094 (1.181) (o2) (o0.079) Model No. tube(PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) FD-41W Free-cut <with FX-AT4> ! table 3.5 0.138 o8.5 o0.335 7 0.276 40 1.575 10 0.394 Allowable bending range 5 0.197 12 0.472 10 0.394 o1.48 o2.5 o0.098 o0.058 Sleeve [Stainless steel M4 x 0.7 0.028 (SUS304)] Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] 2.4 0.094 2,000 78.740 2-o1 (30) o0.039 (1.181) (o2) (o0.079) Model No. tube(PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) <with FX-AT5> o8.5 o0.335 2 0.079 7 0.276 3.5 0.138 12 0.472 2.4 0.094 2,000 78.740 (30) (1.181) 2-o1.3 o0.051 o3 o0.118 End bracket [Stainless steel(SUS303)] Toothed lock washer M4 [Stainless steel(SUS304)] Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] M4 x 0.7 0.028 (o2.5) (o0.098) Model No. tube(PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) www.SunxSensors.com Refer to the FX-500 ^<_' FX-100 ^_ % # # % + ' ' ' " FD-42G Free-cut FD-42GW 25 0.984 5 12 0.472 0.197 1.2 0.047 2,000 78.740 (30) (1.181) 2.4 0.094 o8.5 o0.335 7 0.276 o1 o0.039 o1.3 o0.051 o2.3 o0.091 Beam-receiving side (o2) (o0.079 ) Model No. tube (PVC) o4 o0.157 M3 x 0.5 0.020 M4 x 0.7 0.028 Beam-emitting side Sheath o1 o0.039 (Polyethylene) Toothed lock washer M4 [Stainless steel(SUS304)] 1.2 0.047 25 0.984 5 0.197 12 0.472 2.4 0.094 M3 x 0.5 0.020 M4 x 0.7 0.028 Sheath o1.3 o0.051 (Polyethylene) (30) (1.181) 3.5 0.138 Fiber Selection Guide application Viewing ! Super Quality Threaded Type Details of sensing part Details of sensing part Tough Fiber by model o1 o0.039 Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] Toothed lock washer M4 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] 3.5 0.138 2,000 78.740 Beam-emitting side o1.3 o0.051 Beam-receiving side o4 (o2) (o0.079) Model No. tube (PVC) o0.157 Sheath o1 o0.039 (Polyethylene) Sheath o1.3 o0.051 (Polyethylene) End bracket [Stainless steel(SUS303)] o2.3 o0.091 Opposing faces 7 0.276 thickness 2.4 0.094 [Stainless steel(SUS304)] New product introduction Free-cut <with FX-AT6> <with FX-AT6> o8.5 o0.335 7 0.276 43 Cylindrical Type Beam-receiving o0.25 o0.010 fiber core x 9 (PMMA) Beam-receiving o0.25 o0.010 fiber core x 9 (PMMA) Beam-emitting o0.5 o0.020 fiber core x 1 (PMMA) Beam-emitting o0.5 o0.020 fiber core x 1 (PMMA) Sleeve Flat Type Small Spot FD-60 FD-61 Free-cut <with FX-AT2> o11 o0.433 15 0.591 2 0.079 5.5 0.217 2 0.079 o4.5 o0.177 o6 o0.236 Mounting reference surface (Screw periphery) End bracket [Brass(Nickel plated)] Opposing faces 10 0.394 thickness 2 0.079 [Brass(Nickel plated)] 2 0.079 o11 o0.433 2,000 78.740 Resin plug(ABS) (20) (0.787) (19.7) (0.776) 10.2 0.402 (0.3) (0.012) o4.5 o0.177 15 0.591 2 0.079 2,000 78.740 (30) (1.181) Free-cut -0.1 -0.004 o6 o0.236-0.13 -0.005 Mounting reference surface (Screw periphery) End bracket [Stainless steel(SUS303)] Opposing faces 10 0.394 thickness 2 0.079 [Stainless steel(SUS304)] Toothed lock washer M6 [Stainless steel(SUS304)] (o3.2) (o0.126) Model No. tube (PVC) o1 o0.039 Fiber core x 1 (Acrylic) Sheath o2.2 o0.087 (Polyethylene) M6 x 0.75 0.030 2 0.079 o4.5 o0.177 15 0.591 2 0.079 (30) (1.181) FD-61S 2-o2.2 o0.087 o11 o0.433 10 0.394 (o3.2) (o0.126) Model No. tube (PVC) Hexagon nut M6 [Stainless steel(SUS304)] Details of sensing part Sheath o2.2 o0.087 (Polyethylene) Toothed lock washer M6 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] M6 x 0.75 0.030 5.5 0.217 Retroreflective Type Heat Vacuum Free-cut Fiber <with FX-AT3> 15 0.591 40 1.575 2,000 78.740 Convergent Reflective Type Liquid Leak / Liquid Detection <with FX-AT3> o11 o0.433 10 0.394 o2.2 o0.087 Wide Beam Chemical o2.2 o1.8 o2.2 (o4.33) o0.087 o0.071 M6 x 0.75 o0.087 (o0.170) (o3.2) (o0.126) Model No. tube (PVC) 0.030 Toothed lock washer M6 [Brass(Nickel plated)] FD-61G 5.5 0.217 <with FX-AT3> Narrow Beam 5.5 10 0.217 0.394 Allowable 5 0.197 bending 10 0.394 range o2.5 o0.098 Sleeve [Stainless steel(SUS304)] 2 0.079 2,000 78.740 2-o2.2 o0.087 (30) (1.181) Fiber [ Thru-beam Type o3.5 o0.138 M6 x 0.75 0.030 Toothed lock washer M6 [Stainless steel(SUS304)] Hexagon nut M6 [Stainless steel(SUS304)] (o3.2) (o0.126) Model No. tube (PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] Type Type Beam-receiving o0.25 o0.010 fiber core x 16 (PMMA) Beam-emitting o1 o0.039 fiber core x 1 (PMMA) FX-500 FD-61W Free-cut FD-62 Free-cut <with FX-AT3> o11 o0.433 10 0.394 2 0.079 5.5 0.217 15 0.591 2 0.079 o4.5 o0.177 Hexagon nut M6 [Stainless steel(SUS304)] Toothed lock washer M6 [Stainless steel(SUS304)] 2,000 78.740 2-o2.2 o0.087 (30) (1.181) <with FX-AT3> o11 o0.433 10 0.394 5.5 0.217 (o3.2) (o0.126) Model No. tube (PVC) M6 x 0.75 0.030 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] FX-100 -0.1 -0.004 o6 o0.236-0.13 -0.005 2 0.079 15 0.591 2 0.079 o4.5 o0.177 Hexagon nut M6 [Stainless steel(SUS304)] Mounting reference surface (Screw periphery) Toothed lock washer M6 [Stainless steel(SUS304)] 2,000 78.740 2-o2.2 o0.087 (30) (1.181) INDEX (o3.2) (o0.126) Model No. tube (PVC) o1.5 o0.059 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) End bracket [Stainless steel(SUS303)] M6 x 0.75 0.030 ! table 44 New product introduction Tough Fiber Ramco Innovations (800) 280-6933 Refer to the FX-500 ^<_' FX-100 ^_ % # # DIMENSIONS (Unit: mm in) % + ' ' ' " FD-64X FD-A16 Fiber Selection Guide Protective tube Polyolefin tube included SUS304 spiral tube 22 0.866 2 15 0.079 10 0.591 0.394 Viewing ! Threaded Type Cylindrical Type o3.8 o0.150 o4.5 o4.5 o0.177 o0.177 application Super Quality Free-cut <with FX-AT3> by model www.SunxSensors.com Details of sensing part 5.5 0.217 2-o2.2 o0.087 4.5 0.177 5.1 0.201 (30) (1.181) (o5.1) (o0.201) Resin plug (ABS) Lens (Norbornene resin) 15 0.591 28 1.102 3.6 0.142 2 0.079 2,000 78.740 2-o2.2 o0.087 8 0.315 B Beam-receiving side 9 0.354 Beam axis A Beam-emitting side 2-o3.3 o0.130 1,000 39.370 6 0.236 (2.5) (0.098) (5.8) (0.228) 2 0.079 10.7 0.421 Enclosure (PC) 7 0.276 11 11.6 7 0.276 0.433 0.457 Crimping part o11 o0.433 End bracket M6 x 0.75 0.030 (o5.1) (o0.201) Model No. tube (PVC) [Stainless steel(SUS303)] Hexagon nut M6 [Stainless steel(SUS304)] Toothed lock washer M6 [Stainless steel(SUS304)] o0.25 o0.010 fiber core x 9 (PMMA) (each beam-emitting part and beam-receiving part) Sheath o2.2 o0.087 (Polyethylene) View A View B Beam-emitting o1 o0.039 fiber core x 1 (PMMA) Beam-receiving o0.25 o0.010 fiber core x 16 (PMMA) Sleeve Flat Type FD-AL11 Free-cut <with FX-AT3> Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type 20 0.787 13 0.512 5 0.197 Vacuum 2-M3 x 0.5 0.020 o0.48 o0.019 2-o2.2 o0.087 2.5 0.098 1 0.039 15 0.591 3 0.118 5 0.197 Details of sensing part o0.25 o0.010 x 16 fiber core (PMMA) Sheath o2.2 o0.087 (Polyethylene) 5 0.197 2-o2.2 o0.087 4.5 0.177 5.1 0.201 4 0.157 (Set screw tightening range) (30) o1.5 o0.059 o0.9 o0.035 (1.181) 2,000 78.740 2.5 0.098 20 15 0.787 0.591 Head block (LCP) (o2.5) (o0.098) 1,000 39.370 6 0.236 (1) (0.039) 10.7 0.421 (3.1) (0.122) Enclosure (PPS) Chemical Heat FD-E13 7 11 11.6 0.276 0.433 0.457 10.85 0.427 Sleeve[Stainless steel (SUS304)] Resin plug (ABS) (o2.5) (o0.098) Model No. tube (PVC) (o0.9) (o0.035) Protective tube (Polyolefin) Details of sensing part Sensing part o0.25 o0.010 fiber core x 32 (emitter / receiver alternating line) End bracket [Stainless steel(SUS303)] Liquid Leak / Liquid Detection o0.125 o0.005 fiber core x 2 (PMMA) (each beam-emitting part and beam-receiving part) Fiber FD-EG30 FD-E23 Fiber [ Thru-beam Type o3 o0.118 Type o0.63 o0.025 (30) (1.181) 2-o2.2 o0.087 4.5 0.177 5.1 0.201 5 0.197 15 0.591 1,000 39.370 6 0.236 (1) (0.039) (3.4) (0.134) End bracket [Stainless steel(SUS303)] FX-500 5.5 1.2 0.217 0.047 10.7 0.421 Beam-receiving 7 11 11.6 side 0.276 0.433 0.457 Beam-emitting side (o3) (o0.118) Model No. tube (PVC) Details of sensing part Sleeve[Stainless steel(SUS304)] 2-o2.2 o0.087 4.5 0.177 5.1 0.201 (o3) (o0.118) Resin plug (ABS) (o1.6) (o0.063)Protective tube (Polyolefin) (o3) (o0.118) Resin plug (ABS) (o1.6)(o0.063) Protective tube (Polyolefin) Type FX-100 (30) (1.181) 16 0.630 o6.5 o2.3 o0.256 o0.091 Details of sensing part 2.8 0.110 500 19.685 6 0.236 10.7 (1) (0.039) 0.421 (3.6) (0.142) 1.8 0.071 Beam-receiving 7 11 11.6 side 0.276 0.433 0.457 Beam-emitting side (o3) (o0.118) Model No. tube(PVC) M3 x 0.5 0.020 End bracket [Stainless steel(SUS303)] Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Toothed lock washer M3 [Stainless steel(SUS304)] Beam-emitting o0.25 o0.010 fiber core x 1 (PMMA) Beam-receiving o0.125 o0.005 fiber core x 9 (PMMA) INDEX Beam-receiving o0.125 o0.005 fiber core x 9 (PMMA) Beam-emitting o0.25 o0.010 fiber core x 1 (PMMA) ! table Ramco Innovations (800) 280-6933 www.SunxSensors.com Refer to the FX-500 ^<_' FX-100 ^_ % # # DIMENSIONS (Unit: mm in) % + ' ' ' " FD-EG30S 45 New product introduction Tough Fiber FD-EG31 2-o2.2 o0.087 (o3) (o0.118) Resin plug (ABS) (o1.6) (o0.063) Protective tube (Polyolefin) Sleeve [Stainless steel(SUS304)] 15 0.591 15 0.591 5.5 0.217 1.8 0.071 1,000 39.370 6 0.236 10.7 (1) (0.039) 0.421 (3.6) (0.142) Beam-receiving 7 11 11.6 side 0.276 0.433 0.457 Beam-emitting M3 x 0.5 0.020 side (o3) (o0.118) Model No. tube(PVC) Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Toothed lock washer M3 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] o6.5 o0.256 Details of sensing part 2.7 0.106 Toothed lock washer M3[Stainless steel(SUS304)] Beam-emitting o0.125 o0.005 fiber core x 1 (PMMA) FD-F4 FD-F41 Free-cut <with FX-AT4> 500 19.685 2-o3.2 o0.126 mounting holes 5 0.197 (o3) (o0.118) Model No. tube (PVC) 14 0.551 o1 o0.039 x 2 (20) (0.787) 14 0.551 (4.44) (0.175) (1.0) (0.039) 2,000 78.740 4 0.157 2,000 78.740 (50) (1.969) Protective tube Range where cutting is not possible (17) Bending prohibited range (0.8) (0.669) (0.031) (10) Crimping part (0.039) (o1.15) (o0.045) Super Quality Threaded Type Cylindrical Type Small Spot Narrow Beam Wide Beam o1 o0.039 x 2 Primary sheath: Polyethylene Secondary sheath: [PFA(fluorine resin)] Convergent Reflective Type Retroreflective Type Chemical (o4) (o0.157) Protective tube [PFA(fluorine resin)] Heat 13 0.512 Vacuum Liquid Leak / Liquid Detection 10 0.394 FD-F71 Free-cut FD-F8Y Free-cut <with FX-AT4> Fiber Emission indicator Viewing ! Flat Type Free-cut <with FX-AT4> 6 0.236 13.5 25 0.531 0.984 FD-F41Y application Sleeve Beam-receiving o0.125 o0.005 fiber core x 6 (PMMA) Beam-receiving o0.125 o0.005 fiber core x 9 (PMMA) 20 0.787 by model 5.1 0.201 (o2.5) (o0.098) Resin plug (ABS) (o1.2)(o0.047) Protective tube (Polyolefin) 16 500 19.685 0.630 6 0.236 5.5 (1) (0.039) 1.3 0.051 1.8 10.7 0.217 0.421 0.071 (3.1) (0.122) Beam-receiving 7 11 11.6 side 0.276 0.433 0.457 Beam-emitting M3 x 0.5 0.020 side o6.5 o0.256 (o2.5) (o0.098) Model No. tube (PVC) End bracket [Stainless steel(SUS303)] Details of sensing part 2.8 0.110 Opposing faces 5.5 0.217 thickness 1.8 0.071 [Stainless steel(SUS304)] Beam-emitting o0.25 o0.010 fiber core x 1 (PMMA) 8 0.315 2-o2.2 o0.087 4.5 0.177 (30) (1.181) o2.3 o0.091 4.5 0.177 5.1 0.201 (30) (1.181) o0.8 o0.031 Fiber Selection Guide 5,000 196.850 3,000 118.110 30 1.181 7.8 0.307 <with FX-AT3> 1,000 39.370 2-o1 o0.039 (26) (1.024) (Bending prohibited range) 16 8 0.315 0.630 Beam-emitting side (Gray) Beam-receiving side (Black) o0.25 o0.010 fiber core x 4 (PMMA) Sheath o1 o0.039 (Polyethylene) (o3.1) (o0.122) Protective tube (PFA) 10 20 0.394 0.787 Enclosure (PFA) 1,000 39.370 (Allowable cutting range) Fiber Fiber [ Thru-beam Type o2.2 o0.087 x 2 (o6) (o0.236) protective tube (Fluorine resin) 10 0.394 22 0.866 Type Type SUS mounting bracket 17 0.669 10 0.394 17.7 12.2 0.480 0.697 Assembly dimensions 6.2 0.244 30 1.181 0.3 0.012 o4.2 o0.165 thru-holes Material: PFA Material: Stainless steel (SUS316) Details of sensing part 10 15 0.394 0.591 PVC mounting bracket 17 0.669 FD-F71 11.5 0.453 SUS mounting bracket (9.4) (0.370) 10.3 0.406 7.8 0.307 20.3 28.3 0.799 1.114 0.3 0.012 15.5 10.5 0.413 0.610 Free-cut <with FX-AT15A> 5.5 0.217 11 0.433 12 0.472 10 0.394 FD-FA93 mounting holes (for tying band) 6.5 3 0.118 0.256 0.9 0.035 2.5 0.098 5.2 0.205 22.2 0.874 o0.25 o0.010 fiber core x 9 (PMMA) Sheath o1.3 o0.051 (Polyethylene) 30 1.181 5.7 0.224 10 0.394 2,000 78.740 25 0.984 FD-F71 4 0.157 11 Welding part 0.433 Material: PVC 11.5 0.453 10 0.394 Sensing part (emitter / receiver alternating line) 17.1 0.673 (o0.25 o0.010 fiber core x 18) PVC mounting bracket 2-o1.3 o0.051 3 0.118 FX-500 FX-100 INDEX Enclosure (ABS) 5.2 0.205 Assembly dimensions 8.75 0.344 2.5 0.098 ! table 46 Ramco Innovations DIMENSIONS (Unit: mm in) New product introduction Tough Fiber (800) 280-6933 Refer to the FX-500 ^<_' FX-100 ^_ % # # % + ' ' ' " FD-H13-FM2 Fiber Selection Guide by model application www.SunxSensors.com Free-cut FD-H18-L31 Free-cut <with FX-AT3> [ 16 0.630 15 0.591 5 0.197 5.5 0.217 o1.5 o0.059 fiber core x 2 <with FX-AT3> 7 0.276 10.75 0.423 2,000 78.740 Viewing ! 2,000 78.740 20 0.787 6.5 0.256 2.7 0.106 A 19 0.748 Screw tightening face o5 o0.197 M6 x 0.75 0.030 o2.2 o0.087 x 2 (Fluorine resin) Opposing faces 10 0.394, thickness 2 0.079 Toothed lock washer o11 o0.433 8 0.315 4 0.157 5 0.197 Super Quality Threaded Type 2-M3 x 0.5 0.020 Head [Stainless steel (SUS)] Holder [Stainless steel (SUS)] View A o4.6 o0.181 Cylindrical Type A o2.2 o0.087 x 2 (Fluorine resin) End bracket (Brass) Emitter / Receiver fiber o1.5 o0.059 x 1 Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemical Heat FD-H20-21 FD-H20-M1 [ Beam-receiving part: o50 m o1.969 mil x 440 Beam-emitting part: o50 m o1.969 mil x 440 1,000 39.370 60 35 30 2.362 1.378 o3.1 1.181 16.7 18.3 o10 o0.122 0.657 0.720 o0.394 5 0.197 o5 o0.197 Emitter mark o4 o5 o0.197 o0.157 o2.9 o0.114 M4 x 0.7 Liner + braid tube Joint 0.028 [Stainless steel (SUS)] 27 1.063 20 0.787 5 0.197 o2.2 o0.087 Beamemitting side Beam3.5 receiving 0.138 side o3 o0.118 Toothed lock washer o8.5 o0.335 [Stainless steel (SUS)] Opposing faces 7 0.276, thickness 2.4 0.094 [Stainless steel (SUS)] Vacuum Liquid Leak / Liquid Detection [ Heat & cold-resistant specifications Ordinary temperature specifications Joint [Brass (Nickel plated)] Beam-receiving part: 28 1,000 inside diameter o1.1 o0.043 1.102 39.370 25 150 60 5 outside diameter o1.6 o0.063 18.3 16.7 5.906 0.984 2.362 0.197 0.657 0.720 Beamfiber core bundle x 1 15 5 0.591 0.197 receiving 5.5 D side 0.217 o2.2 o0.087 BeamP o9 o0.354 Screw emitting o6 o4.2 o0.165 (Silicone) tightening face side o0.236 Fixing plug (PA) o5 End bracket Beam-emitting part: o3.5 o0.197 Fixing bracket o0.138 [Brass (Nickel plated)] o1.1 o0.043 fiber [Brass (Nickel plated)] core bundle x 1 M6 x 0.75 Opposing faces 10 0.394, o2.9 o0.114 (Silicone) 0.030 thickness 2 0.079 Toothed lock washer o11 o0.433 Fiber FD-H25-L43 Fiber [ 33.2 1.307 21.7 0.854 Thru-beam Type Type Type FD-H25-L45 <with FX-AT2> 5 0.197 4.5 0.177 6.5 0.256 Heat-resistant specifications o2.9 o0.114 3,000 118.110 <with FX-AT2> 34.5 1.358 23 0.906 19.5 0.768 Ordinary temperature specifications (150) (5.906) 10 0.394 BeamA emitting side (o4.33) (o0.170) BeamA receiving side o2.2 o0.087 x 2 21 0.827 2 0.079 o3.8 o0.150 5 0.197 4.5 0.177 6.5 0.256 Heat-resistant specifications o2.9 o0.114 2 0.079 FX-500 FX-100 INDEX ! table Slit mask [Stainless steel(SUS)] Beam axis Fiber holder (Heat-resistant resin) (24.2) (0.953) View A o1.2 o0.047 (Beam-receiving fiber o1.5 o0.059) fiber core x 1 10 0.394 BeamA emitting side (o4.33) (o0.170) BeamA receiving side o2.2 o0.087 x 2 o3.8 o0.150 2-mounting holes for M3 countersunk head screw Prism(BK7) Enclosure (Heat-resistant resin) o5 o0.197 19.5 0.768 Tube [Stainless steel(SUS)] 2-mounting holes for M3 countersunk head screw Prism(BK7) Ordinary temperature specifications (150) (5.906) 21 0.827 Tube [Stainless steel(SUS)] 3,000 118.110 Slit mask [Stainless steel(SUS)] Beam axis Fiber holder (Heat-resistant resin) Enclosure (Heat-resistant resin) o5 o0.197 View A (24.2) (0.953) o1.2 o0.047 (Beam-receiving fiber o1.5 o0.059) fiber core x 1 Resin plug(PA) Resin plug(PA) Fixing bracket [Brass(Nickel plated)] Fixing bracket [Brass(Nickel plated)] Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) Refer to the FX-500 ^<_' FX-100 ^_ % # # % + ' ' ' " FD-H30-KZ1V-S 15 21.7 (0.854 ) 0.591 30 1.181 11 0.433 o3.6 o0.142 9.5 0.374 2-o1 o0.039 vent holes 20 0.787 7 0.276 4 0.157 o4 o0.157 10.75 0.423 Mounting cap nut opposing faces 8 0.315 [Stainless steel (SUS)] Joint [Stainless steel (SUS)] End bracket [Stainless steel (SUS)] Enclosure [Stainless steel (SUS)] 4.6 0.181 2,000 78.740 16.7 0.657 16.7 6.5 0.657 0.256 o5 o4 o2.9 o0.197 o0.157 o0.114 4 0.157 Tube [Stainless steel (SUS)] 4.6 0.181 t 1.2 t 0.047 5 0.197 2-M3 x 0.5 0.020 o4 o0.157 12.2 0.480 10.2 0.402 14 0.551 Super Quality Threaded Type Holder [Stainless steel (SUS)] View A o4.6 o0.181 Emitter / Receiver fiber o1.2 o0.047 fiber core x 1 4 0.157 3.3 0.130 4 0.157 Viewing ! Cylindrical Type 3.3 0.130 6 0.236 application End bracket [Stainless steel (SUS)] 2-M3 x 0.5 0.020 Head [Stainless steel (SUS)] Assembly dimensions with MS-FD-2 (attached mounting bracket) 15 0.591 by model 18.3 0.720 A o2.2 o0.087 Fixing plug (PA) Fixing bracket [Brass (Nickel plated)] o2.7 o0.106 9.5 0.374 Tough Fiber Fiber Selection Guide A 8 0.315 19 0.748 Liner + braid tube [Stainless steel (SUS)] 5.2 0.205 New product introduction FD-H30-L32 1,000 39.370 o4 o0.157 Glass lens (BK7) 47 www.SunxSensors.com Sleeve Flat Type Small Spot Mounting bracket (MS-FD-2) 7 0.276 [Stainless steel (SUS)] Narrow Beam 5.2 0.205 Wide Beam " FD-H30-KZ1V-S is a set with the FD-H30-KZ1V, photo-terminal FV-BR1' FT-J8 ][ + Convergent Reflective Type Retroreflective Type FD-H30-L32V-S 7 0.276 20 0.787 (1.2 0.047) 8 0.315 16.7 (0.657 ) o3.6 o0.142 30 1.181 11 0.433 [ 4 0.157 o4 o0.157 Mounting cap nut opposing faces 8 0.315 [Stainless steel (SUS)] End bracket [Stainless steel (SUS)] Liner + braid tube 2-M3 x 0.5 0.020 Enclosure [Stainless steel (SUS)] [Stainless steel (SUS)] Holder [Stainless steel (SUS)] 4 0.157 o4.6 o0.181 Chemical 90 3.543 Allowable bending range 5 0.197 10 Beam-receiving part: 0.394 o50 m o1.969 mil x 380 27 1.063 20 0.787 10 0.394 o4 o0.157 o2.1 o0.083 [Stainless steel (SUS)] o3 o0.118 Joint [Stainless steel (SUS)] Rod prism (BK7) 5 0.197 3,000 118.110 6.5 0.256 o4 o0.157 10.75 0.423 19 0.748 FD-H35-20S 1,000 39.370 35 60 1.378 30 2.362 16.7 18.3 1.181 0.657 0.720 o2.2 5 o0.087 0.197 o5 o0.197 o2.9 o0.114 Resin plug (PA) o10 o0.394 Joint o3.1 o5 o0.197 o0.122 M4 x 0.7 0.028 Liner + braid tube [Stainless steel (SUS)] Opposing faces 7 0.276, thickness 2.4 0.094 [Stainless steel (SUS)] Toothed lock washer o8.5 o0.335 [Stainless steel (SUS)] Beam-emitting part: o50 m o1.969 mil x 380 3.4 (0.134 ) o2.7 o0.106 Liquid Leak / Liquid Detection Fiber Thru-beam Type FD-H35-M2 [ Heat & cold-resistant Ordinary temperature specifications specifications 3 22 2,000 Beam-receiving part: 0.118 0.866 78.740 inside diameter o1.8 o0.071 150 30 60 5 outside diameter o2.2 o0.087 5.906 1.181 2.362 0.197 17 fiber core bundle x 1 5 0.669 0.197 Type 16.7 0.657 D o5 o0.197 o4 o0.157 [Stainless steel (SUS)] M6 x 0.75 0.030 [Stainless steel (SUS)] FD-H35-M2S6 o1.8 o0.071 fiber core bundle x 1 emitting and receiving Vacuum Fiber [ " FD-H30-L32V-S is a set with the FD-H30-L32V, photo-terminal FV-BR1' FT-J8 ][ + [ Heat Heat & cold-resistant Ordinary temperature specifications specifications 2,000 22 60 78.740 0.866 2.362 60 5 30 150 2.362 0.197 1.181 5.906 5 17 5 0.197 0.669 0.197 Beam-emitting part: o1.3 o0.051 fiber core bundle x 1 16.7 0.657 Beamreceiving side o2.2 o0.087 Beamemitting side Fixing plug (PA) Fixing bracket [Brass (Nickel plated)] Opposing faces 10 0.394, thickness 2 0.079 [Stainless steel (SUS)] Toothed lock washer o11 o0.433 [Stainless steel (SUS)] o5 o0.197 [Stainless steel (SUS)] o10 o0.394 o3 o0.118 o5 o0.197 (Silicone) o3.8 o0.150 [Stainless steel (SUS)] FD-HF40Y 18.3 0.720 18.3 0.720 o2.8 o0.110 [Stainless steel (SUS)] o4 o0.157 [Stainless steel (SUS)] M6 x 0.75 0.030 [Stainless steel (SUS)] Toothed lock washer o11 o0.433 [Stainless steel (SUS)] o10 o0.394 Joint [Brass o3 o0.118 (Nickel plated)] (Silicone) P FX-500 FX-100 Free-cut <with FX-AT4> o5 o0.197 o5 o0.197 Type INDEX 500 o2.2 o0.087 o3.8 o0.150 Fixing plug (PA) [Stainless steel (SUS)] o5 o0.197 Fixing bracket [Stainless steel (SUS)] [Brass (Nickel plated)] Opposing faces 10 0.394, thickness 2 0.079 [Stainless steel (SUS)] 2,000 78.740 19.685 (50) (1.969) Protective tube Range where cutting is not possible (4.44) (0.175) (1.0) (0.039) (0.8) (0.031) (o1.15) (o0.045) (17) Bending prohibited range (0.669) (10) Crimping part (0.394) (o4) (o0.157) Protective tube [PFA(fluorine resin)] o1 o0.039 x 2 (Polyethylene) ! table 48 New product introduction Tough Fiber Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) Refer to the FX-500 ^<_' FX-100 ^_ % # # % + ' ' ' " FD-L10 Free-cut Fiber Selection Guide by model application Viewing ! FD-L11 19 0.748 7 0.276 2 0.079 Lens (PMMA) 12 0.472 4.5 0.177 Slit mask [Stainless steel (SUS304-CSP-H)] o0.75 o0.030 fiber core x 1 (PMMA) 2,000 78.740 Sheath o1.3 o0.051 (Polyethylene) 3.5 0.138 o1.3 o0.051 o1 o0.039 Beam-receiving side (7) (0.276) Beam-emitting side o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) Enclosure (PC) 12 0.472 8 0.315 0.6 2.9 0.024 0.114 2-mounting holes for M3 countersunk head screw Enclosure (PC) 3 0.118 Beam (1.15) (0.045) axis 2-mounting holes for M3 countersunk head screw FD-L12W Free-cut FD-L20H Free-cut <with FX-AT4> <with FX-AT4> Cylindrical Type 0.5 0.020 Sleeve 7 0.276 1.5 0.059 Flat Type 7.2 0.283 (o2) (o0.079) Model No. tube (PVC) Mounting holes for M2 countersunk head screw 2-o1 o0.039 Beam axis 2 0.079 Wide Beam 2,000 78.740 2.5 0.098 13 0.512 18 0.709 Enclosure (PC) Prism (PC) Narrow Beam 14 0.551 1,000 39.370 2.5 0.098 (30) (5) (0.197) (1.181) 0.5 0.020 Lens (PMMA) FD-L21 Free-cut 2-o1 o0.039 o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) Enclosure (ABS) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) 1.5 0.059 o1.6 o0.063 3 8 2-o 0.11 o Small Spot 6 0.236 FD-L21W Free-cut <with FX-AT4> Chemical 21 0.827 6.5 7 0.256 0.276 3 0.118 Heat Vacuum o0.75 o0.030 fiber core x 1 (PMMA) 2,000 78.740 3.5 Sheath o1.3 o0.051 (Polyethylene) 0.138 o1.3 o0.051 o1 o0.039 Beam-receiving side (7) (0.276) Beam-emitting side o0.5 o0.020 x 1 fiber core (Acrylic) Sheath o1 o0.039 (Polyethylene) (1.15) (0.045) Super Quality Retroreflective Type 19 0.748 7 0.276 2 0.079 Lens (PMMA) Convergent Reflective Type Free-cut <with FX-AT6> <with FX-AT6> 2.5 0.8 0.031 0.098 3 0.118 Threaded Type www.SunxSensors.com 24 0.945 16 0.630 2,000 78.740 2-mounting holes for M3 countersunk head screw 3 0.118 2-o1 o0.039 o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) (19) (0.748) <with FX-AT4> 21 0.827 6.5 7 0.256 0.276 2,000 78.740 2-mounting holes for M3 countersunk head screw 16 0.630 24 0.945 (19) (0.748) 0.5 o0.020 x 1 fiber ocore (Acrylic) Sheath o1 o0.039 (Polyethylene) Liquid Leak / Liquid Detection Front film (Polyester) 4 0.157 Enclosure (ABS) 2-o1 o0.039 Beam axis Front film (Polyester) (2) (0.079) Beam axis (2) (0.079) 4 0.157 Fiber Enclosure (ABS) FD-L22A Free-cut Fiber [ 29 1.142 6.5 18 0.709 2.5 0.098 0.256 Thru-beam Type Type Type FD-L23 Free-cut <with FX-AT5> 17 0.669 2 0.079 Enclosure (ABS) 2-mounting holes for M3 countersunk head screw 3.8 0.150 Beam axis 2,000 78.740 2-o1.3 o0.051 (15.3) 10 0.394 (0.602) 12 0.472 <with FX-AT5> 2.5 0.098 Beam-emitting side (Gray) Beam-receiving side (Black) 2-mounting holes for M3 countersunk head screw 3.8 0.150 Beam axis (4.88) (0.192) o0.25 o0.010 fiber core x 9 (PMMA) Sheath o1.3 o0.051 (Polyethylene) FX-100 o0.25 o0.010 fiber core x 9 (PMMA) Sheath o1.3 o0.051 (Polyethylene) (1.8) (0.071) Enclosure (PC) FD-L30A Free-cut (1.8) (0.071) FD-L31A Free-cut <with FX-AT5> 29 1.142 18 0.709 6.5 2.5 0.098 0.256 INDEX 2-mounting holes for M3 countersunk head screw 3.8 0.150 Beam axis <with FX-AT3> 3,000 118.110 3 0.118 2-o1.3 o0.051 Beam-emitting side (Gray) (17.3) (0.681) Beam-receiving side (Black) (5.3) (0.209) 20 0.787 ! table 3,000 118.110 2-o1.3 o0.051 Beam-emitting side (Gray) (16.3) (0.642) Beam-receiving (4.8) (0.189) side (Black) 18 0.709 FX-500 29 1.142 6.5 18 0.709 0.256 o0.25 o0.010 fiber core x 9 (PMMA) Sheath o1.3 o0.051 (Polyethylene) (1.95) (0.077) 29 1.142 6.5 18 0.709 0.256 3,000 118.110 (2.1) (0.083) 2-o2.2 o0.087 Beam-emitting side 23.5 0.925 (19.4) (0.764) Beam-receiving side o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) 2-mounting holes for M3 countersunk head screw 4.5 0.177 Beam axis o0.25 o0.010 fiber core x 16 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Enclosure (ABS) Enclosure (ABS) (2.3) (0.091) Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) Refer to the FX-500 ^<_' FX-100 ^_ % # # % + ' ' ' " FD-L32H Free-cut FD-R60 (8) (0.315) o1.5 o0.059 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Enclosure (ABS) 15 0.591 15 0.591 7.5 0.295 7.3 0.287 25 0.984 20 0.787 2,000 78.740 M6 x 0.75 0.030 2-o3.2 o0.126 mounting holes o5.7 o0.224 spot facing deep 2.6 0.102 3-o3.2 o0.126 (0.5 0.020 deep, on both sides) 2 0.079 o4.5 o0.177 Hexagon nut M6 [Stainless steel (SUS304)] (30) Fixing bracket (1.181) [Stainless steel(SUS303)] (o3.2) (o0.126) Model No. tube (PVC) R51 o5 o0.197 R0.1970.039 o1.2 o0.047 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) o1.2 o0.047 Stainless steel pipe 905 [Stainless steel(SUS304)] End bracket [Stainless steel(SUS303)] 5 0.197 -0.1 -0.004 2 0.079 o6 o0.236-0.13 -0.005 o1 o0.039 o1.5 o0.059 2 0.079 Details of sensing part 2-o2.2 o0.087 8 0.315 Sheath o1 o0.039 (Polyethylene) End bracket [Stainless steel (SUS303)] 2 0.079 8 0.315 4 Set screw tightening range 0.157 (o2.5) (o0.098) 4.5 0.177 1,000 39.370 6 10.7 (1) (0.039) 0.236 0.421 (3.1) (0.122) o2 o0.079 7 11 11.6 0.276 0.433 0.457 Resin plug (ABS) (o2.5) (o0.098) Model No. tube (PVC) Super Quality Threaded Type Small Spot Narrow Beam 5.1 0.201 o1 o0.039 Sleeve <with FX-AT2> (30) (1.181) Viewing ! Flat Type FD-S30 (Set screw tightening range) application Cylindrical Type o11 o0.433 10 0.394 4 0.157 Fiber Selection Guide 5 0.197 Toothed lock 13 washer M6 0.512 [Stainless steel (SUS304)] Mounting reference surface (Screw periphery) FD-S21 Tough Fiber by model 2-o2.2 o0.087 2-o2.2 o0.087 (16.7) (0.657) Lens (Norbornene resin) <with FX-AT3> 4,000 157.480 4.5 0.177 30 1.181 6.5 0.256 New product introduction Free-cut <with FX-AT3> 25 0.984 49 www.SunxSensors.com 2,000 78.740 Resin plug(ABS) (20) (0.787) o3 o0.118 Mounting reference surface (Periphery) Wide Beam (19.7) (0.776) 10.2 0.402 (0.3) (0.012) o2.2 o0.087 (o4.33) (o0.170) o1 o0.039 (o2) (o0.079) Model No. tube (PVC) o1.8 o0.071 Convergent Reflective Type Retroreflective Type Chemical Heat End bracket [Stainless steel (SUS303)] Vacuum Liquid Leak / Liquid Detection o0.25 o0.010 fiber core x 2 (PMMA) (each beam-emitting part and beam-receiving part) FD-S31 Fiber Free-cut FD-S32 Free-cut <with FX-AT4> 2 0.079 8 0.315 o2 o0.079 2,000 78.740 o1 4 0.157 (Set screw tightening range) o0.039 (30) (1.181) <with FX-AT5> 2.7 0.106 2,000 78.740 (30) (1.181) 15 0.591 7 0.276 Thru-beam Type 2-o1.3 o0.051 Type Type o3 o0.118 o3 o0.118 -0.07 -0.003 -0.1 -0.004 Mounting reference surface (Periphery) End bracket [Stainless steel (SUS303)] End bracket [Stainless steel (SUS303)] (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 Fiber core x 1 (Acryic) Sheath o1 o0.039 (Polyethylene) Fiber [ (o2.5) (o0.098) Model No. tube (PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) FD-S32W Free-cut FD-S33GW Free-cut <with FX-AT5> 2.7 0.106 15 0.591 7 0.276 <with FX-AT6> 15 0.591 7 0.276 2,000 78.740 (30) (1.181) 2,000 78.740 (30) (1.181) Beam-emitting side End bracket [Stainless steel (SUS303)] o1.3 o0.051 (o2.5) (o0.098) Model No. tube (PVC) o1 o0.039 fiber core x 1 (PMMA) Sheath o1.3 o0.051 (Polyethylene) Details of sensing part o3 o0.118 End bracket [Stainless steel (SUS303)] FX-100 o1 o0.039 2-o1.3 o0.051 o3 o0.118 FX-500 INDEX Beam-receiving side (o2) (o0.079) Model No. tube (PVC) Sheath o1 o0.039 (Polyethylene) Sheath o1.3 o0.051 (Polyethylene) 2.7 0.106 Beam-receiving o0.25 o0.010 fiber core x 9 (PMMA) Beam-emitting o0.5 o0.020 fiber core x 1 (PMMA) ! table 50 New product introduction Tough Fiber Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) Refer to the FX-500 ^<_' FX-100 ^_ % # # % + ' ' ' " FD-V30 Free-cut Fiber Selection Guide 2.8 0.110 application Threaded Type o3 o0.118 2 0.079 2.5 0.098 1.3 0.051 1.3 0.051 Shielding plate (Polyester) Shielding plate (Polyester) FD-V50 Free-cut 4.5 0.177 10 0.394 Set screw tightening range 0.5 0.020 15 0.591 20 0.787 A 2,000 78.740 2-o2.2 o0.087 (30) (1.181) o5 o0.197 o2 o0.079 Sleeve [Stainless steel(SUS304)] End bracket [Stainless steel (SUS303)] (o3.2) (o0.126) Model No. tube (PVC) Thru-beam Type 5 0.197 Free-cut 2 0.079 3.5 0.138 2.5 0.098 2.2 0.087 10 4 0.157 0.394 1,000 39.370 o2.2 o0.087 hole, o3.6 o0.142 spot facing, 1.4 0.055 deep 2-o1 4-R1 R0.039 (30) o0.039 (1.181) Type Beam axis ! table (o3) (o0.118) Model No. tube (PVC) 1 0.039 3.5 3.5 0.138 0.138 1.2 0.047 7 0.276 14 6.5 2.2 0.087 0.551 0.256 7 0.276 2,000 78.740 o3.2 o0.126 hole, o5.6 o0.220 spot facing, 2.2 0.087 deep Inner pipe [Stainless steel (SUS)] Multi-core fiber (Fiber core: acrylic, Sheath: polyethylene) (20) (0.787) 3.5 0.138 Beam axis A A o1.3 o 0.051 x 2 Prism (Acrylic) (o3.2) (o0.118) Model No. tube (PVC) 1.05 0.041 Multi-core fiber o0.075 o0.003 x 151 FD-Z50HW Free-cut o0.5 o0.020 fiber core x 1 (PMMA) 0.6 0.024 Sheath o1 o0.039 (Polyethylene) <with FX-AT3> <with FX-AT5> o3.2 o0.126 hole, o5.6 o0.220 spot facing, 2.2 0.087 deep 1 3.5 0.138 0.039 1.05 0.041 11 0.433 o2.4 o0.094 7 0.276 Beam axis o1 o0.039 fiber core x 1 (PMMA) 0.9 Sheath o1.3 o0.051 (Polyethylene) 0.035 2,000 78.740 Enclosure (PC) 5.2 0.205 Beam axis 2-o1.3 o0.051 (o2.5) (o0.098) Model 2.7 0.106 No. tube (PVC) 1.6 0.063 1 0.039 4.6 0.181 9.5 0.374 2,000 78.740 3.5 4-R1 R0.039 0.138 Enclosure (PC) (30) (2.2) (0.087) (1.181) 3.5 0.138 2.2 0.087 14 6.5 0.256 0.551 15 0.591 Lens (BK7) Free-cut Inner pipe [Stainless steel(SUS304)] 1.05 0.041 A A o1 o 0.039 x 2 Free-cut o1 View A o0.039 FD-Z40HBW 7 0.276 Prism Beam (Acrylic) axis o2.4 o0.094 Enclosure (Polycarbonate) (2.2) (0.087) (o2) (o0.079) Model No. tube (PVC) Inner pipe o1.5 [Stainless steel(SUS304)] Enclosure (PC) o0.059 7 1 0.039 2.1 0.083 0.276 Type (20) (0.787) <with FX-AT5> FD-Z20HBW 0.5 0.020 1.05 0.041 INDEX 2 0.079 2.5 0.098 1.2 0.047 2.2 10 4 0.157 0.087 0.394 Multi-core fiber o0.0375 o0.001 x 151 1.7 0.067 Fiber [ 1,000 39.370 o2.2 o0.087 hole, o3.6 o0.142 spot facing, 1.4 0.055 deep Inner pipe [Stainless steel (SUS)] Multi-core fiber (Fiber core: Acrylic, Sheath: Polyethylene) FD-WZ7 2.3 0.091 3 0.118 <with FX-AT4> FX-100 7 0.276 View A o0.5 o0.020 o0.75 o0.030 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) View A 10 0.394 FX-500 5 0.197 3.5 0.138 o1.5 Enclosure o0.059 (Polycarbonate) Shielding plate (Polyester) Fiber Free-cut <with FX-AT4> Beam axis Vacuum Liquid Leak / Liquid Detection FD-WZ4 <with FX-AT3> Retroreflective Type Heat (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) View A 2 0.079 2.5 0.098 Convergent Reflective Type Chemical 2,000 78.740 2-o1 o0.039 (30) (1.181) o3 o0.118 End bracket [Stainless steel (SUS303)] Sleeve [Stainless steel(SUS304)] (o2) (o0.079) Model No. tube (PVC) o0.5 o0.020 fiber core x 1 (PMMA) Sheath o1 o0.039 (Polyethylene) 15 0.591 o1.5 o0.059 A Sleeve [Stainless steel(SUS303)] End bracket [Stainless steel (SUS303)] View A Small Spot Wide Beam Beam axis 15 0.591 2,000 78.740 2-o1 o0.039 (30) (1.181) Set screw tightening range 10 0.394 2.8 0.110 Flat Type Narrow Beam Free-cut <with FX-AT4> Set screw tightening range 15 0.591 o1.5 o0.059 A Cylindrical Type Sleeve 10 0.394 Beam axis 15 0.591 Viewing ! Super Quality FD-V30W <with FX-AT4> by model www.SunxSensors.com 2-o2.2 o0.087 o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Assembly dimensions with MS-FD-2 (attached mounting bracket) Lens (BK7) 9.5 0.374 4.6 0.181 12.2 0.480 5 0.197 10.2 0.402 1 0.039 15 2,000 78.740 0.591 2-M3 x 0.5 0.020 3.3 0.130 4 0.157 3.3 0.130 1.2 0.047 14 0.551 6 0.236 4 0.157 7 0.276 MS-FD-2 Mounting bracket [Stainless steel(SUS304)] Enclosure (PC) 2-o2.2 o0.087 5.2 0.205 Beam axis o1 o0.039 fiber core x 1 (PMMA) Sheath o2.2 o0.087 (Polyethylene) Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) www.SunxSensors.com Refer to the FX-500 ^<_' FX-100 ^_ % # # 51 New product introduction Tough Fiber < ! FT-J8 Free-cut Fiber Selection Guide ^ + _ <with FX-AT3> Photo-terminal side Amplifier side by model 2,000 78.740 4 0.157 10 0.394 o3.6 o0.142 application o2.2 o0.087 11 0.433 Viewing ! Mounting cap nut opposing faces 8 0.315 [Stainless steel (SUS)] o4 o0.157 Joint [Brass (C3604) (Nickel plated)] Super Quality Threaded Type Cylindrical Type FB-1 @ ^_ 52 2.047 40 1.575 FTP- FDP- ^_ FTP-, FDP-N L 15 0.591 15 0.591 3 0.118 20 0.787 o15 o0.591 Wide Beam o4.5 o0.177 spiral tube [Stainless steel (SUS)] FV-BR1 + ^ +_ ^# + _ Chamber wall or flange M4 x 0.7 0.028 internal thread, 5 0.197 deep FTP-N o5.5 to o6.0 o0.217 to o0.236 M5 x 0.8 0.031 thread [Stainless steel (SUS)] 5 0.197 o3.8 o0.150 spiral tube [Stainless steel (SUS)] o5 o0.197 [Brass (Nickel plated)] M2.6 x 0.45 0.018 internal thread, 3 0.118 deep M6 x 0.75 0.030 thread [Stainless steel (SUS)] FDP- L 15 0.591 3 0.118 15 0.591 o7 o0.276 spiral tube [Stainless steel (SUS)] o8 o0.315 [Brass (Nickel plated)] M6 x 0.75 0.030 internal thread, 5 0.197 deep + +# ^_ 4.7 0.185 10.5 0.413 Heat Liquid Leak / Liquid Detection Fiber Thru-beam Type M10 x 1 0.039 thread [Brass (Nickel plated)] Type Type FTP-1000, FTP-N1000, FDP-N1000, FDP-1000 FTP-1500, FTP-N1500, FDP-N1500, FDP-1500 9.5 0.374 7.3 0.287 3.6 0.142 o18 o0.709 Length L FTP-500, FTP-N500, FDP-N500, FDP-500 4.5 0.177 Chemical M3 x 0.5 0.020 internal thread, 5 0.197 deep ~ " ~ Aluminum alloy ^<=<[+<_ Lens+ Lens (BK7) Retroreflective Type Fiber [ 3.7 0.146 Enclosure [Stainless steel (SUS)] o11 o0.433 3.7 0.146 o4 o0.157 FV-SV2 15 0.591 Convergent Reflective Type Vacuum + ^_ o3.6 o0.142 lens o1 o0.039 vent hole 2 0.079 14 0.551 M5 x 0.8 0.031 thread O-ring Spring washer o10 o0.394 Opposing faces 8 0.315, thickness 3 0.118 9.2 0.362 6 0.236 4 0.157 L 15 0.591 Hole FV-LE1 M8 x 1 0.039 thread [Brass (Nickel plated)] o6 o0.236 [Brass (Nickel plated)] ~ ^ _ Mounting hole Small Spot Narrow Beam 8.6 0.341 36 +10 1.417 +0.039 0 6 0.236 2 0.079 Sleeve Flat Type Length L 500 +100 [\<] =J\ 0 1,000 +100 J\J= =J\ 0 1,500 +100 ]\=]] =J\ 0 Heat resistant adhesive FX-500 2-o3.1 o0.122 FX-100 2.8 0.110 6.6 0.260 o1 o0.039 vent hole 5.5 0.217 3.6 0.142 M2.6 x 0.45 0.018, 3.2 0.126 deep INDEX ! table 52 New product introduction Tough Fiber Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) Refer to the FX-500 ^<_' FX-100 ^_ % # # FX-AT2 + ^ + _ by model FX-AT3 ZZ == in ^ ZZ == in _ 8 0.315 6 0.236 Fiber Selection Guide www.SunxSensors.com application ~ ~ FX-AT4 20.5 0.807 3.5 0.138 6.5 2 0.256 0.079 o2.2 o0.087 ~ Holder ^" <<_ Ground~ Small Spot Convergent Reflective Type 3 0.118 4 0.157 20.5 0.807 3.5 0.138 15 7 0.591 0.276 5 0.197 1.7 0.067 o2.2 o0.087 Vacuum ~ ^" <<_ Ground ~ FX-LE1 Fiber [ 9.2 0.362 Thru-beam Type FX-500 FX-100 o2.2 o0.087 FX-CT2 o1.4 o0.055 o1.4 o0.055 15 7 0.591 0.276 5 0.197 1.7 0.067 o2.2 o0.087 @ ^ + _ o4.3 o0.169 ~ Brass ^" | _ Lens Glass 8 0.315 45 1.772 o1.4 o0.055 25 0.984 ~ FX-LE2 + ^_ 22.2 0.874 17 0.669 8 5 0.315 0.197 Lens Knurled surface o9 o0.354 o7 o0.276 o12 o10.2 o0.472 o0.402 M2.6 x 0.45 0.018 internal thread, 3 0.118 deep 6 0.236 M4 x 0.7 0.028 internal thread, 6 0.236 deep ~ ^?J=J_ Lens Glass FX-MR1 o4 o0.157 ^_ Lens Lens Effective dia.: o3.3 o0.130 FX-MR2 ^_ 27.1 1.067 20 0.787 Mounting drawing with FD-G4 7 0.276 4.5 0.177 o8 o0.315 o7.1 o0.280 20.2 0.795 11 0.433 INDEX o6 o0.236 ! table 6.5 0.256 5 0.197 o1.1 o0.043 2 0.079 14.6 0.575 ^_ o4 o0.157 Type 2 0.079 o2.2 o0.087 6.5 0.256 5 0.197 Heat Type 3.5 0.138 (Accessory for o1 mm ==J\ } [J ==][ in _ Chemical Fiber 3 0.118 4 0.157 20.5 0.807 ~ ^" <<_ Ground ~ FX-AT6 Attachment for o1 mm ==J\ } [J ==][ in Retroreflective Type Liquid Leak / Liquid Detection ^ [J ==][ in _ o1.1 o0.043 Narrow Beam Wide Beam [J ==][ in o1.1 o0.043 5 0.197 7 15 0.591 0.276 5 0.197 1.7 0.067 o2.2 o0.087 Sleeve Flat Type FX-AT5 (Accessory for o1 mm ==J\ in _ Cylindrical Type 11.2 16 0.441 0.630 ~ Attachment for o1 mm ==J\ in 3 0.118 4 0.157 5 0.197 4 0.157 7 0.276 7 0.276 Super Quality Threaded Type 8.2 0.323 14 0.551 7 13 0.276 0.512 Viewing ! 9.1 0.358 7.5 0.295 2-o2.3 o0.091 = 36 to 37 1.417 to 1.457 " $ =] ==Z spot, it is necessary to keep M4 x 0.7 0.028 internal ' ' # thread, 6 0.236 deep ~ ^ | ~$_ Lens Glass M4 x 0.7 0.028 internal thread, 6 0.236 deep ~ ^ | ~$_ Lens Glass Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) FX-MR3 www.SunxSensors.com Refer to the FX-500 ^<_' FX-100 ^_ % # # @ ^_ FX-MR5 6.3 0.248 Mounting drawing with FD-EG30 15 0.591 = 27.5 1.083 4 0.157 5 0.197 o4 o0.157 ^_ o5 o0.197 lens 3.3 0.130 application 8 0.315 2-M3 x 0.5 0.020 thru-hole threads ~ ^ | ~$_ Lens Glass ~ ^ |_ Lens Glass Viewing ! 7 0.276 Knurled " * ' Tough Fiber by model 3 0.118 2.5 0.098 4.5 0.177 M3 x 0.5 0.020 internal thread New product introduction Fiber Selection Guide 10.3 0.406 20.3 0.799 53 M4 x 0.7 0.028 internal thread, 11 0.433 deep 3.15 0.124 Super Quality NT-FX-MR5 ^ _ Threaded Type FX-MR6 @ ^_ FX-SV1 +# ^_ Sleeve Mounting drawing with FD-EG31 o4 o0.157 Flat Type Rod prism Flat knurl M3 x 0.5 0.020 o4 o0.157 o5 o0.197 16 0.630 Small Spot Narrow Beam M2.6 x 0.45 0.018 internal thread, 3 0.118 deep 5 0.197 ~ ^ | ~$_ Lens Acrylic Knurled surface 8 0.315 2.5 0.098 = 28.5 1.122 Lens Cylindrical Type Wide Beam Convergent Reflective Type ~ ^" | _ Lens Glass Retroreflective Type Chemical " * ' Heat Vacuum MS-EX3 Mounting bracket for FX-MR2 (Accessory for FX-MR2_ 0.5 0.020 MS-FD-2 Fiber mounting bracket Accessory for FD-Z50HW, FR-KZ50E/KZ50H/Z50HW, FD-H30-KZ1V-S 4 0.157 2-M3 x 0.5 0.020 9.8 0.386 8.7 0.343 0.8 8.5 0.031 0.335 2-o3.5 o0.138 mounting holes 4.9 0.193 Anti-slip rubber sheet (8 x 9.5 x 1) (0.315 x 0.374 x 0.039) t1.2 10 0.394 16 0.630 23 0.906 Liquid Leak / Liquid Detection 4 0.157 12.2 0.480 10.2 0.402 5 0.197 6 0.236 3.3 0.130 4 0.157 3.3 0.130 7 0.276 Fiber Fiber [ Thru-beam Type ~ ^?J=_ 14 0.551 ~ ^" | _ Type Type MS-FD-3 Fiber mounting bracket RF-003 FR-KZ50E/KZ50H Accessory for FT-KV40/FT-KV40W (11) (0.433) 3.2 0.126 3.3 0.130 C1 C0.039 R2.5 R0.098 Accessory for FR-KZ50E/KZ50H 10.1 5 0.398 0.197 3.3 0.130 3-R0.5 R0.020 5 0.197 10 0.394 5 0.197 R1.6 R0.063 (88) (90) 19 0.748 3.2 0.126 3.9 0.154 (88) (90) Cover [Stainless steel (SUS304)] 10.6 0.417 1.1 0.043 10 0.394 (Effective reflector width) 10 0.394 19 28 (Effective reflector width) 0.748 1.102 FX-500 FX-100 1 0.039 3.2 0.126 4.3 0.169 Reflector (Norbornene resin) INDEX 3.5 0.138 0.4 0.016 6.9 0.272 6.9 0.272 Material: Stainless steel (SUS304) ! table 54 New product introduction Tough Fiber Ramco Innovations (800) 280-6933 DIMENSIONS (Unit: mm in) RF-210 Refer to the FX-500 ^<_' FX-100 ^_ % # # ^_ 35.3 1.390 M3 nut mounting holes (for mounting at the back) Reflector application 11 0.433 Viewing ! 34.3 42.3 1.350 1.665 8 0.315 25 0.984 10 0.394 2-o3.4 o0.134 holes, 6 0.236 deep (for mounting at the back) 2-M3 nut mounting holes (for mounting at the side) ~ ^ _ ^_ # ~J ^ =J[] _ # # # # Flat Type RF-230 Narrow Beam ^_ 50.3 1.980 Wide Beam Convergent Reflective Type 49.3 59.3 1.941 2.335 (30) (1.181) Heat Vacuum Liquid Leak / Liquid Detection 10 0.394 5 0.197 40 1.575 ~ ^ _ ^_ Fiber Fiber [ Thru-beam Type Type Type FX-500 FX-100 INDEX ! table 3.3 0.130 25 0.984 ~ ^ _ ^_ Threaded Type Chemical 4 0.157 2-o3.4 o0.134 thru-holes (for mounting at the side) Super Quality Retroreflective Type (21) (0.827) Base 3.2 0.126 Small Spot ^_ 12.8 0.504 by model Sleeve RF-220 33.3 1.311 Fiber Selection Guide Cylindrical Type www.SunxSensors.com 3.3 0.130 2-o4.6 o0.181 mounting holes 8.3 0.327 2-o3.6 o0.142 mounting holes 8.3 0.327 Ramco Innovations (800) 280-6933 www.SunxSensors.com 55 56 Ramco Innovations (800) 280-6933 www.SunxSensors.com Digital Fiber Sensor ! introduction Tough Fiber Fiber Selection Guide FX-500 SERIES At the industry's leading edge Choose by model Choose Conforming to EMC Directive Viewing new models Listing Certified Fibers Quality Threaded Cylindrical Sleeve Flat Small Narroe Beam Wide Beam Convergent Chemicalresistant Heatresistant Vacuumresistant ,[ When the FX-500 # { ' [} ' # Super quality fiber FX-500 series Incident light intensity ! Liquid Detection Fiber 1/4 Unify the threshold value Fiber Dimensions Thru-beam Incident light intensities are stable. Threshold Incident light value intensity Previous amplifier Can control by using just one threshold value. incident light intensity variation [from previous] Threshold Incident light value intensity Incident light intensity L D MODE Large variation in incident light intensity. Variation in the threshold value L D MODE L Requires setting different threshold values for each sensor. D MODE Others L D MODE FX-500 series FX-100 series H y p e r '* HYPR ! ! ! # # # FX-500 # # ' # INDEX 7RXJK FX-500 FD-41 Previous FD-NFM2 HYPR mode Earlier models table FX-301 (LONG mode) Note: When using FD-NFM2. Max. 5.7 times! (Note) longer than the previous model Ramco Innovations (800) 280-6933 www.SunxSensors.com ! , ! ! FX-500 with its ' #+ ! # H-02 mode 57 ! introduction # H-01 mode Tough Fiber Fiber Selection Guide Choose by model Choose Retroreflective type fiber Viewing new models Fibers FT-A11 Reflector Quality Threaded Display adjustment setting $! z[ !{ Cylindrical Sleeve # ! $ # Flat Current incident light intensity Unify incident light intensity into any value Small Narroe Beam < } ! Wide Beam Convergent ^"%' ' _' [ FX-500 { # ! Calculation of two neighboring amplifiers Lower side Output 1 Calculation result output Upper side Output 1 Normal operation Time chart For L-ON Beamreceived Beaminterrupted ON OFF Sensing condition T1 ON-delay Communication direction (Up to 12 units) Calculation of two outputs in one amplifier FX-502(P) / 505(P)-C2 ONE-SHOT % Output 1 Calculation result output Output 2 Normal output operation Calculation of one amplifier and external input T1 OFF-delay T1 T1 ON OFF T1 ON-delay % OFF-delay T1 ON-delay % ONE-SHOT T1 ON OFF T2 T2 Chemicalresistant Heatresistant Vacuumresistant ! Liquid Detection ON OFF ON OFF Fiber FX-502(P) / 505(P)-C2 Timer period: 0.05 ms to 32 s "!"! $% $$% timers. External input (sensor, contact, PLC, etc.) Fiber Dimensions Output 1 Calculation result output Thru-beam ! | #| !! # Others FX-500 series Single copy & save operation for all amplifiers Optical communication window <jz}{ <jz}{< * ' }' ' FX-502 (P_ # Z FX-100 series INDEX ! # Earlier models table 58 ! ! !! Quick-connection cable is not supplied with FX-501(P) and FX-502(P). Please order it separately. Type Appearance Emitting element Model No. Standard type ! www.SunxSensors.com ORDER GUIDE Output FX-501 NPN open-collector transistor FX-501P PNP open-collector transistor External input - 2-output type (800) 280-6933 FX-502 NPN open-collector transistor 2 outputs Incorporated (Switchable with Output 2) Red LED Cable type ! ! Ramco Innovations FX-502P PNP open-collector transistor 2 outputs FX-505-C2 NPN open-collector transistor 2 outputs, analog output FX-505P-C2 PNP open-collector transistor 2 outputs, analog output Incorporated ! < <j](P) 1/4 |+ # ' Type ! CN-73-C1 Main cable (3-core) < Sub cable (1-core) Description CN-73-C5 CN-71-C1 Length: 1 m 3.281 ft CN-71-C2 Length: 2 m 6.562 ft 2 0.15 mm 1-core cabtyre cable, with connector on one end Cable outer diameter: o3.0 mm o0.118 in Length: 5 m 16.404 ft Connectable to a main cable up to 15 cables. Model No. CN-74-C1 Main cable (4-core) CN-74-C2 CN-74-C5 < CN-71-C ' Type [ <j(P) 1/4 |+ # ! ![ CN-73-C Length: 1 m 3.281 ft 0.15 mm2 3-core cabtyre cable, with connector Length: 2 m 6.562 ft on one end Cable outer diameter: o3.0 mm o0.118 in Length: 5 m 16.404 ft CN-73-C2 CN-71-C5 < < Model No. CN-72-C1 Sub cable (2-core) CN-72-C2 CN-72-C5 Description CN-74-C Length: 1 m 3.281 ft 0.15 mm2 4-core cabtyre cable, with connector Length: 2 m 6.562 ft on one end Cable outer diameter: o3.0 mm o0.118 in Length: 5 m 16.404 ft Length: 1 m 3.281 ft 0.15 mm2 2-core cabtyre cable, with connector on one end Length: 2 m 6.562 ft Cable outer diameter: o3.0 mm o0.118 in Length: 5 m 16.404 ft Connectable to a main cable up to 15 cables. CN-72-C ! # # Appearance Model No. FX-500 FX-100 INDEX ! MS-DIN-E Description * ' # moves depending on the way it is installed on a %$" ' place on both sides. Make sure to use end plates # Two pcs. per set Ramco Innovations (800) 280-6933 www.SunxSensors.com OPTIONS 59 ! ! Designation Model No. mounting bracket MS-DIN-2 Description ~ | MS-DIN-2 ! ! Communication window seal ! FX-MB1 ^ _ 10 sets of 2 communication window seals and 1 connector seal Connector seal !! ! ! < < < ! ![ [ < FX-500 FX-100 INDEX ! 60 ! ! Ramco Innovations ! ! Model No. Type Item Standard type 2-output type Cable type (Analog output type) NPN output FX-501 FX-502 FX-505-C2 PNP output FX-501P FX-502P FX-505P-C2 +10 12 to 24 V DC-15 % Ripple P-P 10 % or less Supply voltage Power consumption Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output of cable type) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output of cable type) Output (2-output type and cable type: Output 1, Output 2) <NPN output type> <PNP output type> NPN open-collector transistor PNP open-collector transistor Maximum sink current: 100 mA Maximum source current: 100 mA (2-output type and cable type are 50 mA) (Note 2) (2-output type and cable type are 50 mA) (Note 2) Applied voltage: 30 V DC or less (between output and 0 V) Applied voltage: 30 V DC or less (between output and +V) Residual voltage: 2 V or less (Note 3) (at maximum sink current) Residual voltage: 2 V or less (Note 3) (at maximum source current) Output points !! ! www.SunxSensors.com SPECIFICATIONS ! (800) 280-6933 1 point 2 points Output operation Switchable either Light-ON or Dark-ON by L/D mode Short-circuit protection Incorporated Response time + Z] ' @ <= ' % Z]= ' " Z ' ?+ ' (c) Z ' Analog output (Cable type only) Z= +' @ % = '=== ' " = '=== ^" _' Z ' * [ @' * [< ] @' * J @' = Z]= 3/4 External input (2-output type only, switchable with Output 2) - <NPN output type> NPN non-contact input Signal condition High: +8 V to +V DC or Open Low: 0 to +1.2 V DC (at 0.5 mA source current) $ [= |3/4 Possible external input function - Sensitivity setting < Incident light intensity display range ! H-SP / @ / % = '===' " = '===' ?+ / (c) = \'\\\ $ # @@+ } "+ }" } "+ @@+ } "+ " timer, switchable either effective or ineffective Timer function ! ![ $ ' J ^ Z] [== _ [ ^Z] [== _ # + Interference prevention function Incorporated (Note 5), selectable either automatic interference prevention or different frequency Various settings < Protection <Output 2> $ # @@+ } "+ }" ' # either effective or ineffective Light emitting amount selection function [ <Output 1> $ # @@+ } "+ }" } "+ @@+ } "+ " ' # Timer range "ms": 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx., Timer range "sec.": 0.5 s approx., 1 to 32 s approx., 1 s approx., Timer range "1/10 ms": 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx., each output is set individually Timer period } ^@+' ' Z+_ } } lock / Display adjustment / Data bank load / Data bank save, selectable Z+ } } @+ } ~ ! < < <PNP output type> PNP non-contact input Signal condition High: +4 V to +V DC (at 3 mA sink current) Low: 0 to +0.6 V DC or Open $ [= |3/4 Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold tracking setting, etc. IP40 (IEC) -10 to +55 C [ [J[ >@ [If 4 to 7 units are mounted in cascade: -10 to +50 C [ [ZZ >@ or if 8 to 16 units (cable type: 8 to 12 units) are mounted in cascade: -10 to +45 C [ [[J >@ ^" # #_' +Z= = > + [] >@ Ambient temperature Emitting element (modulated) Red LED (Peak emission wavelength: 643 nm 0.025 mil) Material Enclosure, Case cover: Polycarbonate, Switch: TPEE Cable - 0.15 mm2 6-core cabtyre cable, 2 m 6.562 ft long Cable extension - Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC) FX-500 Weight " # [] ' # = " # <= ' # [== FX-100 INDEX Accessory FX-MB1 ^ _ [ " [_ * ' # ZJ > J >@. 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) 3) In case of using the quick-connection cable (cable length 5 m 16.404 ft) (optional). 4) If display adjustment was conducted, it is not in this range. 5) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below. Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. " ^? _ ! Response time H-SP @ STD " ?+ (c) IP-1 0 2 4 8 8 12 Ramco Innovations (800) 280-6933 www.SunxSensors.com $$$[$$[$' ! ! FX-501 NPN output type $ ! Terminal No. Color code of quick-connection cable ! Brown (Note 1) (Brown) +V (Note 1) Sensor circuit Load Load 2 12 to 24 V DC +10 % - 100 mA max. (Note 2) 3 - -15 12 to 24 V DC +10 % -15 Blue (Note 1) Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. (Blue) 0 V (Note 1) Internal circuit + Black + User's circuit Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. Z_ ]= ' ' ' 2 Output 3 0V !! ! Color code of quick-connection cable Sensor circuit 2 3 12 to 24 V DC +10 % -15 - (Black) Output Load (Blue) 0 V (Note 1) Internal circuit + Black + - Load Blue (Note 1) 12 to 24 V DC +10 % -15 Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. User's circuit Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. Z_ ]= ' ' ' ! 1 +V 2 Output 3 0V ! ! < < < NPN output type Terminal No. FX-502 $ ! ! Brown (Note 1) (Brown) +V (Note 1) 100 mA max. (Note 2) ! +V Color code of quick-connection cable 1 1 PNP output type Terminal No. ! ! FX-501P $ ! Color code of quick-connection cable ! 1 (Black) Output 61 Color code of quick-connection cable ! ![ Color code of quick-connection cable Brown (Note 1) (Brown) +V (Note 1) Sensor circuit 1 4 2 (White) Output 2 / External input 50 mA max. (Note 2) (Black) Output 1 50 mA max. (Note 2) 3 White Load Load + - External input + - Black 12 to 24 V DC +10 % -15 Blue (Note 1) 12 to 24 V DC +10 % User's circuit -15 ! Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. Z_ Z] ' ' ' 1 +V 2 Output 1 3 0V External input Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. (Blue) 0 V (Note 1) Internal circuit Load Load [ < 4 Output 2 / External input FX-502P PNP output type $ ! Terminal No. ! Color code of quick-connection cable Brown (Note 1) (Brown) +V (Note 1) 1 Sensor circuit 50 mA max. (Note 2) 2 4 (Black) Output 1 50 mA max. (Note 2) (White) Output 2 / External input External input + - Black 12 to 24 V DC +10 % -15 Load Load 3 Internal circuit Color code of quick-connection cable (Blue) 0 V (Note 1) User's circuit Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V (blue). The power is supplied from the connector of the main cable. Z_ Z] ' ' ' White Blue Load Load (Note 1) External input + 12 to 24 V DC +10 - % -15 Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. FX-500 FX-100 INDEX ! 1 +V 2 Output 1 3 0V ! 4 Output 2 / External input 62 Ramco Innovations FX-505-C2 NPN output type $ ! ! Color code (Brown) +V ! (Pink) External input ! Sensor circuit ! www.SunxSensors.com $$$[$$[$' ! ! (800) 280-6933 Brown Load Load (Black) Output 1 + - (White) Output 2 Black 12 to 24 V DC 10 % 15 Load Load White + Pink - (Blue) 0 V (Gray) Analog output (4 to 20 mA) Blue Load (0 to 250 ) Load (0 to 250 ) Gray Internal circuit 12 to 24 V DC 10 % 15 User's circuit !! ! FX-505P-C2 $ ! ! < < < ! ![ [ < FX-500 FX-100 INDEX ! Color code Brown (Black) Output 1 + (White) Output 2 Load (Pink) External input (Blue) 0 V ! (Brown) +V Sensor circuit PNP output type - 12 to 24 V DC 10 % 15 Black Load (0 to 250 ) Blue Gray Internal circuit User's circuit + White Load (Gray) Analog output (4 to 20 mA) Pink Load - 12 to 24 V DC 10 % 15 Load Load (0 to 250 ) Ramco Innovations (800) 280-6933 PRECAUTIONS FOR PROPER USE Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. ~| # @@ # Note that if a voltage exceeding the reted range is applied, or if an AC power supply is directly connected, the product may get burnt or damaged. Note that short-circuit of the load or wrong wiring may burn or damage the product. Do not run the wires together with high-voltage lines or power lines, or put them in the same raceway. This can cause malfunction due to induction. Verify that the supply voltage variation is within the rating. If power is supplied from a commercial switching ' ^@_ the power supply is connected to an actual ground. In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this ' ^@_ equipment to an actual ground. Make sure to use the quick-connection cable (optional) for the connection of the controller. Extension up to total 100 m 328.084 ft is possible with 0.3 mm2 or more, cable. However, in order to reduce noise, make the wiring as short as possible. Make sure that stress by forcible bending or pulling is not ! www.SunxSensors.com Refer to the "PRO mode operation manual" on our website for details. Our products have been developed / produced for industrial use only. ^?+' (c)_ likely to be affected by extraneous noise since the sensitivity of that is higher than the other modes. Make sure to check the environment before use. % ^+' @' % =] ' "' ?+' (c) [ _ power supply is switched ON. These sensors are only for indoor use. Avoid dust, dirt, and steam. Make sure that the product does not come in contact with oil, grease, organic solvents such as thinner, etc., strong acid or alkaline. This product cannot be used in an environment Never disassemble or modify this product. This product adopts EEPROM. Settings cannot be done 100 thousand times or more because of the EEPROM's lifetime. 63 ! ! ! ! ! !! ! ! < < < ! ![ [ < FX-500 FX-100 INDEX ! 64 ! ! Ramco Innovations [$'$zin) FX-501(P) ! 8.2 0.323 10.4 62.5 2.461 0.409 2 0.079 Digital display (Green / Red) !! Communication window 27.8 1.094 22.7 0.894 32 1.260 28 20.8 1.102 0.819 7 0.276 Beamreceiving part 62.5 2.461 2 0.079 10.4 0.409 Digital display (Green / Red) 1.1 0.043 7 0.276 10.5 0.413 24 0.945 36.5 1.437 3 75 2.953 0.118 Suitable for 35 mm 1.378 in width DIN rail Notes: 1) 2) 3) 4) 8.2 0.323 Output 2 operation indicator (Orange) 10 Beam- 0.394 emitting part Beamreceiving part 5.7 0.224 ! MODE key Setting switch (Note 4) 10 Beam- 0.394 emitting part FX-505P-C2 Output selection indicator (Yellow) Output 2 operation indicator (Orange) (Note 1) FX-505-C2 MODE key Output 1 operation indicator (Orange) Output 1 operation indicator (Orange) (Note 2) ! www.SunxSensors.com The CAD data in the dimensions can be downloaded from our website. FX-502(P) Output selection indicator (Yellow) (Note 1) ! (800) 280-6933 Communication window 32 28 1.260 1.102 20.8 7 0.276 0.819 3 0.118 o3.7 o0.146 cable 2 m 6.562 ft (Note) 10.5 0.413 9.2 0.362 5.7 0.224 3.95 0.156 (Note 3) FX-502(P) only FX-501(P): Operation indicator FX-501(P): 3-pin, FX-502(P): 4-pin The shape of setting switch will be changed from production at the end of November, 2011. Please see drawing below. 27.8 1.094 22.7 0.894 7 0.276 Setting switch (Note) 24 0.945 36.5 1.437 75 2.953 Suitable for 35 mm 1.378 in width DIN rail 3.95 0.156 2.8 0.110 Note: The shape of setting switch and cable will be changed from production at the end of November, 2011. Please see drawing below. ! < < ! Output selection indicator (Yellow) (Note 1) Setting switch Communication window 10 Beam- 0.394 emitting part Beamreceiving part FX-500 FX-100 INDEX ! MODE key Output 2 operation indicator (Orange) (Note 1) ! ![ < Output selection indicator (Yellow) 8.2 0.323 62.5 2.461 2 0.079 9.95 0.392 MODE key Output 1 operation indicator (Orange) Output 1 operation indicator (Orange) (Note 2) < [ 8.2 0.323 ! 9.95 62.5 2.461 0.392 2 0.079 Digital display (Green / Red) 27.8 1.094 22.7 0.894 32 1.260 28 20.8 1.102 0.819 7 0.276 Notes: 1) FX-502(P) only 2) FX-501(P): Operation indicator 3) FX-501(P): 3-pin, FX-502(P): 4-pin Digital display (Green / Red) 1.1 0.043 7 0.276 10.5 0.413 5.7 0.224 24 0.945 36.5 1.437 3 75 2.953 0.118 Suitable for 35 mm 1.378 in width DIN rail Output 2 operation indicator (Orange) 3.95 0.156 (Note 3) 10 Beam- 0.394 emitting part Beamreceiving part Communication window 27.8 1.094 22.7 0.894 7 0.276 32 28 1.260 1.102 20.8 7 0.276 0.819 o4 o0.157 6 core cable 2 m 6.562 ft 10.5 0.413 9.2 0.362 5.7 0.224 3 0.118 Setting switch 24 0.945 36.5 1.437 75 2.953 Suitable for 35 mm 1.378 in width DIN rail 3.95 0.156 2.8 0.110 Ramco Innovations (800) 280-6933 [$'$zin) CN-73-C CN-74-C Main cable (Optional) Length L Model No. 65 www.SunxSensors.com The CAD data in the dimensions can be downloaded from our website. ! ! CN-71-C CN-72-C Sub cable (Optional) Length L L Length L (Note 2) <\^<] 1,000 39.370 <\^< 2,000 78.740 <\^< 5,000 196.850 50 1.969 ( 2.54 0.100 ) 2.9 (0.114 ) 10 0.394 6 0.236 2.54 0.100 Notes: 1) CN-74-C 2) CN-73-C J+ 39.370 <]< 2,000 78.740 <]< 5,000 196.850 7 0.276 10 0.394 13.6 0.535 3 0.118 14 (0.551 ) ( 2.9 0.114 ) 10 0.394 6 0.236 ( ) 12 10.5 (0.472 ) 0.413 2.54 0.100 2.65 0.104 7.2 0.283 3 0.118 ! ! o3 o0.118 cable 2.54 0.100 (Note 1) 0.2 0.008 2.65 0.104 <]<] 1,000 ( ) 12 10.5 (0.472 ) 0.413 (Note 1) 50 1.969 L Length L (Note 2) o3 o0.118 cable 14 0.551 Model No. ! 0.2 0.008 Notes: 1) CN-72-C 2) CN-71-C [+ 7 0.276 10 0.394 13.6 0.535 3 0.118 7.2 0.283 !! ! MS-DIN-2 | ^_ 21.6 0.850 16 0.630 5.2 0.205 MS-DIN-E End plate (Optional) 2.75 0.108 3.2 0.126 10 0.394 8.5 0.335 3.2 0.126 0.4 0.016 o1.8 o0.071 7.5 0.295 4.2 0.165 5.2 0.205 35 1.378 2 0.079 2 0.079 2-o3.2 o0.126 holes Material: Cold rolled carbon steel (SPCC) ^?+ _ 5 0.197 27 1.063 M3 (length 18 mm 0.709 in) pan head screws 3 0.118 15 0.591 60 2.362 3 0.118 5.6 M3 square nut 0.220 24.7 0.972 t1 t 0.039 1.6 0.063 32 1.260 Material: Polycarbonate 4 0.157 Suitable for 35 mm 1.378 in width DIN rail ! < < < ! ![ [ < FX-500 FX-100 INDEX ! 66 Ramco Innovations (800) 280-6933 www.SunxSensors.com % @ ! ! ! FX-100 SERIES * ! Conforming to EMC Directive ! Listing !! ! FX-100 Z=[[ # | < < <! 0.354 in $ ! \ =J] # ' # | ? *| ?" @+ [Stable sensing comparison] < 9 mm 0.354 in ! ![ < FX-100 Three-chemical emitting element Long-term stability Time [ Light-emitting amount ! " # ! @@ # <Setting example> Thru-beam type / Retroreflective type ! ! # ' # ' Variations in the amount of light received Object present ON Object absent OFF FX-500 FX-100 Reflective type Unify at 500 using the GETA function $[ ! Object present ON Object absent OFF Ramco Innovations (800) 280-6933 ! a n $ # # ! ! ' # J www.SunxSensors.com !< ! #' # ' <Wiring inset coping> Light emitting amount changed Master side Color of lead wire of attached connector cable + - (White) External input Copy Slave side 12 to 24 V DC 10 % (Brown) +V '< * ' } ' Z+ ' (Brown) +V ! ! (White) External input !! ' ' ' ' + ^ _' ' ' ' ^ _ SC-SU1 # ^_ The emitted light and output indicator flash at the same frequency. ! (Blue) 0 V { # ' # (Blue) 0 V (Black) Output <]j] $ J <]j $ ! ! (Brown) +V (Black) Output $ 67 ! ! ECO ' Z= # | | # | <== * ^* Z= *_ < < < ! ![ < ! !! !! (Black) Output (White) External input (Blue) 0 V External input lines are equipped as standard PLC etc. + ' { DP-100 PM-64 < < ! !! [ < FX-500 Commercially-available connector FX-100 $[ ! 68 ! ! Ramco Innovations Appearance ! M8 plug-in connector type Cable set (Note 1) Standard type M8 plug-in connector type ! ! !! ! < < < ! ![ M8 plug-in connector type M8 plug-in connector type Cable set (Note 1) FX-101-Z (Note 3) NPN open-collector transistor FX-101P (Note 2) PNP open-collector transistor FX-101P-Z (Note 3) PNP open-collector transistor FX-101-CC2 NPN open-collector transistor FX-101P-CC2 PNP open-collector collector transistor FX-102 (Note 2) NPN open-collector transistor FX-102-Z (Note 3) NPN open-collector transistor FX-102P (Note 2) PNP open-collector transistor FX-102P-Z (Note 3) PNP open-collector transistor FX-102-CC2 NPN open-collector transistor FX-102P-CC2 PNP open-collector transistor Model No. Connector attached cable * Only include cable set type FC-FX-1 (Protection cover) * It have been attached from the production at July, 2011. Description 31.4 1.236 1 m 3.281 ft CN-14A-C3 3 m 9.843 ft CN-14A-C5 5 m 16.404 ft CN-14A-R-C1 1 m 3.281 ft CN-14A-R-C2 2 m 6.562 ft CN-14A-R-C3 3 m 9.843 ft CN-14A-R-C5 5 m 16.404 ft M8 connector attached cable CN-24A-C2 2 m 6.562 ft CN-24A-C5 5 m 16.404 ft Connector CN-14A Set of 10 housings and 40 contacts Connector attached cable (Flexible type) End plates Copy unit <^< o4 o0.157 CN-14A-C2 (Note 1) 2 m 6.562 ft MS-DIN-4 mounting bracket FX-100 NPN open-collector transistor ' ! Designation FX-500 FX-101 (Note 2) CN-14A-C2 Connector attached cable 2 m 6.562 ft OPTIONS [ < Output Notes: 1) The connector attached cable CN-14A-C2 # 2) Make sure to use the optional connector attached cable CN-14A(-R)< or the connector CN-14A, or a connector manufactured by J.S.T. Mfg. Co., Ltd. (contact: SPHD-001T-P0.5, housing: PAP-04V-S) 3) Make sure to use the optional M8 connector attached cable <^<. CN-14A-C1 Emitting element Model No. Red LED Long sensing range type ! www.SunxSensors.com ORDER GUIDE Type (800) 280-6933 0.2 mm2 4-core cabtyre cable with connector on one end Cable outer diameter: o3.7 mm o0.146 in M8 connector attached cable CN-24A-C Fixing ring For M8 plug-in connector type The connector on one end Cable outer diameter: o4 mm o0.157 in MS-DIN-4 ~ | Two pcs. per set When it moves depending on the way it is installed on a DIN rail, in a secure and fully connected manner. SC-SU1 Copy the controller settings to other controllers. MS-DIN-E o9 o0.354 Note: The connector attached cable CN-14A-C2 is supplied with the cable set type<]j<. ! CN-14A(-R)< INDEX !! Contact: SPHD-001T-P0.5, Housing: PAP-04V-S (Manufactured by J.S.T. Mfg. Co., Ltd.) Note: Contact the manufacturer for details of the recommended products. ! CN-14A Contact !! Model No.: YC-610R (Manufactured by J.S.T. Mfg. Co., Ltd.) Note: Contact the manufacturer for details of the recommended products. Housing Ramco Innovations (800) 280-6933 www.SunxSensors.com SPECIFICATIONS Model No. Type Item ! ! Standard type Long sensing range type Cable set FX-101(-Z) (Note 5) FX-101-CC2 FX-102(-Z) (Note 5) FX-102-CC2 PNP output FX-101P(-Z) (Note 5) FX-101P-CC2 FX-102P(-Z) (Note 5) FX-102P-CC2 Supply voltage Output Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) Selectable either Light-ON or Dark-ON, at SET mode Incorporated !! <NPN output type> NPN non-contact input % # = Z % (Source current 0.5 mA or less) $ [= |3/4 <PNP output type> PNP non-contact input % (Sink current 0.5 to 3 mA) # = =< % $ [= |3/4 Emission frequency 0: 250 s or less (factory default setting) Emission frequency 1: 450 s or less Emission frequency 2: 500 s or less Emission frequency 3: 600 s or less ! Incorporated < ON-delay / OFF-delay timer, switchable either effective or ineffective [Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] < J < Attenuation function Environmental resistance ^_ ^_ % Fine sensitivity adjustment function Incorporated Emission frequency selection method (Note 2) (Functions at emission frequency 1, 2 or 3) Incorporated Emission frequency selection method (Note 2) (Functions at emission frequency 1, 2, 3 or 4) [= ]] > [ [J[ >@ ^$ [= ]= > [ [ZZ >@, if 8 to 16 units are mounted close together: [= ] > [ [[J >@_ ^" # #_' Z= = > [] >@ Ambient humidity ! ![ 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance Voltage withstandability ! Orange LED (lights up when the output is ON) Digital display Ambient temperature Emission frequency 1: 2.5 ms or less (factory default setting) Emission frequency 2: 2.8 ms or less Emission frequency 3: 3.2 ms or less Emission frequency 4: 5.0 ms or less 2-point teaching / Limit teaching / Full-auto teaching Operation indicator Interference prevention function ! Sensitivity setting Timer function <NPN output type> <PNP output type> NPN open-collector transistor PNP open-collector transistor ~ | [== ~ [== Applied voltage: 30 V DC or less (between output and 0 V) J= % ^# _ [] ^ [== | _ Residual voltage: 1.5 V or less (at 100 mA source current) Short-circuit protection Response time ! ! 12 to 24 V DC 10 % Ripple P-P 10 % or less Output operation External input Cable set NPN output Power consumption 69 $ J'=== + 1,000 V AC for one min. between all supply terminals connected together and enclosure (Note 3) [ Insulation resistance Z= ~3/4' ' # Z]= % # ^" J_ Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each < Shock resistance 98 m/s2 ^[= _ ' (c) Emitting element (modulated) Red LED (Peak emission wavelength: 632 nm 0.025 mil) Material Enclosure: Polycarbonate, Key switch: Polycarbonate, Fiber lock lever: PBT Connecting method Cable length Weight Accessory Connector (Note 4) Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. Net weight: 15 g approx. Gross weight: 35 g approx. Net weight: 15 g approx. Gross weight: 75 g approx. Net weight: 15 g approx. Gross weight: 35 g approx. FC-FX-1 (Protection cover): 1 pc. (Note 6) FC-FX-1 FC-FX-1 (Protection cover): 1 pc. (Note 6) CN-14A-C2 (Protection cover): 1 pc. (Note 6) (Connector attached cable, 2 m 6.562 ft long): 1 pc. Net weight: 15 g approx. Gross weight: 75 g approx. FC-FX-1 (Protection cover): 1 pc. (Note 6) CN-14A-C2 (Connector attached cable, 2 m 6.562 ft long): 1 pc. " [_ * ' # ZJ > J >@. Z_ * ' { different frequency values. However, the interference prevention function does not operate at emission frequency 0 (factory default setting) for the FX-101(P)(-Z) / FX-101(P)-CC2. J_ # 4) Connector attached cable CN-14A-C2 is not attached to the models that have no "-CC2" at the end of the model Nos. Make sure to use the optional connector attached cable CN-14A(-R)< or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd. (contact: SPHD-001T-P0.5, housing: PAP-04V-S). ]_ ~ " -Z" are M8 plug-in connector type. Make sure to use the optional M8 attached connector cable <^<. 6) Protection cover FC-FX-1 has been attached from the production at July, 2011. FX-500 FX-100 INDEX ! 70 Ramco Innovations <]j(<<) NPN output type $ ! ! ! Terminal No. 1 Sensor circuit 2 Tr +8 V 3 ! *1 FX-500 FX-100 INDEX ! 0V Terminal No. 1 or 3 Function 2 Output Non-voltage contact or NPN open-collector transistor External input 4 0V ^ %' _ $ # = Z % ^ =] _ <]j}(<<) PNP output type $ ! ! Terminal No. Color code of cable with connector 1 Sensor circuit 3 *1 100 mA max. 2 D 4 (Black) Output (Blue) 0 V Load + - 12 to 24 V DC 10 % Function 1 (White) External input ZD Tr Terminal No. (Brown) +V Internal circuit 4 *1 External input '< ! ![ Output 3 Symbols ... D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor < 2 (Blue) 0 V < < 12 to 24 V DC 10 % Users' circuit < [ + - Function 1 (White) External input Internal circuit Load 100 mA max. 4 (Black) Output ZD Terminal No. (Brown) +V D ! ! Color code of cable with connector ! !! www.SunxSensors.com $$$[$$[$' ! ! (800) 280-6933 2 Output 3 External input 4 0V Users' circuit '< Symbols ... D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : PNP output transistor Terminal No. 1 *1 2 Non-voltage contact or PNP open-collector transistor or % ^| =] J _ # ^= =< %' _ $ 3 Function 4 Output External input 0V Ramco Innovations (800) 280-6933 PRECAUTIONS FOR PROPER USE Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. <\jj<^]j The FX-100 series does not use the horizontal connectors that are used with the FX-300 / FX-410 series. Please note that horizontal connection cannot be performed using a connector attached cable. In addition, the optical communication function is not equipped on the FX-100 series, so it is unable to perform interference prevention for use with the FX-300 / FX-410 series. If using the FX-100 series together with the FX-300 / FX-410 series side-by-side, please set the same models together in groups. ' ?[$ @ Fit the rear part of the mounting J] 1.378 in width DIN rail. Press down the rear part of the mounting section of the unit on the 2 1 35 mm 1.378 in width DIN rail and 35 mm 1.378 in width DIN rail section to the DIN rail. # Lift up the front part of the www.SunxSensors.com Refer to the "Operation Guide" on our website for details pertaining to 71 ! ! Make sure that the power supply is OFF while adding or Note that if a voltage exceeding the reted range is applied, or if an AC power supply is directly connected, the product may get burnt or damaged. Note that short-circuit of the load or wrong wiring may burn or damage the product. Do not run the wires together with high-voltage lines or power lines, or put them in the same raceway. This can cause malfunction due to induction. Verify that the supply voltage variation is within the rating. If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground. In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground. Make sure to use the quick-connection cable (optional) for the connection of the controller. Extension up to total 100 m 328.084 ft is possible with 0.3 mm2 or more, cable. However, in order to reduce noise, make the wiring as short as possible. ! ! !! ! ! } ! Operation indicator (Orange) ! ON key / Setting value UP key OFF key / Setting value DOWN key < < MODE key < Digital display (Green) (Threshold value) Digital display (Red) (Incident light intensity) ! ![ 1 2 ! Setting mode appears after the MODE key is pressed for 2 sec. in RUN mode. " | # forward, the hook on the rear portion of the mounting section is likely to break. Setting item Factory setting Teaching mode ? @ Use M3 screws with washers for mounting. The tightening torque should be 0.5 N*m or less. Output operation setting Timer operation setting Description Threshold value can be set in 2-point teaching, limit teaching, or full-auto teaching. Timer setting [Dark-ON] Light-ON or Dark-ON can be set. [Without timer] [ON-delay timer: 10 ms] timer in the timer operation setting mode, timer can be set. When timer is not set, this mode is Level 3 Setting for reduced intensity of emission amount is possible when the incident light intensity is saturated. 0 (Response time: 250 s or less) <]j 1 (Response time: 2.5 ms or less) FX-500 FX-100 INDEX <]j] Emission frequency setting < Without timer, ON delay timer, or OFF delay timer can be set. [OFF-delay timer: 10 ms] not displayed. Emission amount setting [ In case of setting ON-delay timer or OFF-delay M3 screw with washer $ ' interference can be prevented by setting different emission frequency. However, when emission frequency 0 is set, interference cannot be prevented. Response time corresponds to emission frequency. ! 72 ! ! Ramco Innovations (800) 280-6933 PRECAUTIONS FOR PROPER USE } ! PRO mode appears after the MODE key is pressed for 4 sec. in RUN mode. ! ! Setting item Factory setting Shift setting ! External input setting !! ! ! < Threshold value-storing setting mode (Note 2) Threshold value follow-up cycle setting (Note 3) GETA function setting (Note 4, 5) [OFF] [OFF] [OFF] < < ! ![ [ < ECO setting Digital display inversion setting Threshold value margin setting [OFF] [OFF] [OFF] Setting copy FX-500 FX-100 INDEX ! Reset Description Shift amount can be selected from 0 to 80 % in the limit teaching. Select 0 % when it is desired [Shift amount 15 %] to set the present incident light intensity as a threshold value. External input can be selected from emission ' ' +' + teaching, ECO (Note 1), 2-point teaching or emission amount test. When setting the incident ", output turns ON / light intensity test " OFF every 100ms when the rate of incident [Emission halt] light intensity and threshold value is less than half of the set shift amount (for example, when the rate of incident light intensity and threshold value is within 10 % for 20 % of shift amount) at external input. [NO] [NO] Threshold value set at the limit teaching, full-auto teaching or 2-point teaching by external input is stored. When selecting Auto in the emission amount setting mode, the set emission amount level is also stored. When incident light intensity exceeds threshold value, this mode can change the threshold value with each set cycle depending on variations of the incident light intensity. The follow-up shift amount is same as the one set in the shift setting mode. However, the threshold value is not stored. Variations can be reduced by correcting the to a target value. Target value to offset incident light intensity can be selected from 0 to 2,000 by 100 unit each. For example, if the target value is set to 2,000 when the incident light intensity is 1,500, the incident light intensity becomes 2,000. It is possible to light up / turn off the digital display. When ECO setting mode is ON, the display turns off in 20 sec. approx. in RUN mode. To light up the display again, press any key for 2 sec. or more. Digital display can be inverted. Margin for threshold value to the present incident light intensity can be checked. When there is no margin, it is possible to make the digital display blink. : Set to "OFF": does not function. : Green blinks. : Red blinks. : Red and green blink. : When conducting limit teaching or 2-point teaching by external input, in case the rate of reference incident light intensity and threshold value after teaching is 200% or more, or in case it is less than half of the shift amount, output turns ON / OFF every 100 ms. (Note 6) For details, refer to " ". Returns to default settings (factory settings.) Notes: 1) When ECO is selected at the external input setting mode, key operation on the main body is invalid during external input. 2) This mode is not indicated unless any of " ", " ", " or " " is set at the external input setting mode. " 3) If the incident light intensity becomes "300" or less, the follow-up operation stops. In that condition, threshold value [digital display (green)] blinks. This function can be used when thru-beam type or $ is applied, the function cannot be used depending on use conditions. 4) If MODE key is pressed in RUN mode when GETA function is used, the incident light intensity before setting GETA function is displayed on the red digital display for 2 sec. approx. 5) When GETA function is used in saturation of incident light intensity (4,000 or more,) " " is indicated on the red digital display. Correction value is up to 4,000. ", " " or 6) This mode does not operate unless any of " " is set at the external input setting mode. " www.SunxSensors.com Refer to the "Operation Guide" on our website for details pertaining to Be sure to use the setting copy function between the identical models (Between <]j] models or <]j models). This function cannot be used between different models. Only one sensor can be connected on slave side with a master side sensor for the setting copy function. Threshold value, output operation setting, timer operation setting, timer setting, light-emitting amount setting, shift setting, external input setting, threshold value margin setting, ECO setting, digital display inversion setting, and threshold value margin setting can be copied. ? ! @ "Copy sending ON", and press the MODE key so that " " is shown on the digital display and the sensor is in copy ready state. For the setting method, refer to "Operation guide". # # # Color code of cable with connector Master side amplifier (Brown) +V (Black) Input (White) External input + - 12 to 24V DC 10 % (Blue) 0 V Slave side amplifier (Brown) +V (Black) Input (White) External input (Blue) 0 V ^"_ " " is shown on the green digital display of the master + # digital display of it, then the copying starts. During copy communication, " " is shown on the green digital ' communication indicator (" A A A A A A A ") is displayed on " the red digital display. When the copying is completed, " " is shown on the ' # + ^ _ is shown on the red digital display of it. # # * $ ' # to . Note: Take care that if the power is not turned on at the same time, the setting contents may not be copied. ? ! ! @ * ' # Press the MODE key for 2 sec. approx. Ramco Innovations (800) 280-6933 73 www.SunxSensors.com Refer to the "Operation Guide" on our website for details pertaining to PRECAUTIONS FOR PROPER USE ! The code setting function makes it possible to set the output operation, timer operation, amount of light emitted, frequency of light emitted, ECO setting, external input, and amount of shift by selecting a code of one's choice. While in the RUN Mode, pressing and holding both the ON key ( ) and OFF key ( ) simultaneously for 4 seconds will switch to the code setting function. Output Timer operation (Note 1) Output operation Timer 2nd digit 3rd digit Emission frequency 4th digit Emission External ECO amount input setting FX-101 FX-102 Shift (Note 1) 5% non 0 1 Emission halt ond 10 ms 1 2 Limit Level 3 (OFF) D-ON 2 ond 40 ms 3 OFF Limit teaching [-] ofd 10 ms 3 4 Full-auto teaching ofd 40 ms 0 1 ECO 10 % non Level 3 (OFF) D-ON non Level 2 (ON) D-ON ofd 10 ms Level 3 (OFF) D-ON ofd 10 ms Level 2 (ON) D-ON ofd 40 ms Level 3 (OFF) D-ON ofd 40 ms Level 2 (ON) D-ON ond 10 ms Level 3 (OFF) D-ON ond 10 ms Level 2 (ON) D-ON ond 40 ms Level 3 (OFF) D-ON ond 40 ms Level 2 (ON) L-ON ond 40 ms Level 2 (ON) L-ON ond 40 ms Level 3 (OFF) L-ON ond 10 ms Level 2 (ON) L-ON ond 10 ms Level 3 (OFF) L-ON ofd 40 ms Level 2 (ON) L-ON ofd 40 ms Level 3 (OFF) L-ON ofd 10 ms Level 2 (ON) L-ON ofd 10 ms Level 3 (OFF) L-ON non Level 2 (ON) L-ON non Level 3 (OFF) !! ! 15 % ! 20 % 25 % Emission amount setting D-ON ? @ No. ! 1st digit The quick setting function makes it possible to set the content of the SET Mode (output operation, timer operation, amount of light emitted, and frequency of light emitted) simply by selecting a setting number. While in the RUN Mode, pressing and holding both the ON key ( ) and OFF key ( ) simultaneously for 2 seconds will switch to the quick setting function. ! ! ? !@ Code Our products have been developed / produced for industrial use only. Do not use during the initial transient time (0.5 sec.) after the power supply is switched on. Take care that the product is not directly exposed + ' frequency lighting device or sunlight etc., as it may affect the sensing performance. This product is suitable for indoor use only. Avoid dust, dirt, and steam. Take care that the product does not come in contact with oil, grease, organic solvents, such as thinner, etc., strong acid or alkaline. This product cannot be used in an environment Never disassemble or modify this product. EEPROM is adopted to this product. It is not possible to conduct teaching 100 thousand times or more, because of the EEPROM's lifetime. ! ! < < 1 2 Emission halt 30 % ond 10 ms 2 3 Limit 35 % ond 40 ms 3 4 Limit teaching [-] 40 % ofd 10 ms 0 1 Full-auto teaching 45 % 2 ECO 50 % 3 2-point teaching non Level 2 (ON) L-ON 1 ofd 40 ms ON ! ![ OFF 3 4 Incident light intensity test 0 1 2-point teaching ON 1 2 Incident light intensity test Auto 2 3 3 4 [ Level 1 2 < Notes: 1) When the present setting is out of the code setting range, " " is shown. When " " is selected, the set content of the digit is not changed. 2) The factory setting is " ". < FX-500 FX-100 INDEX ! 74 ! ! Ramco Innovations [$'$z) 0.8 0.031 ! 48 1.890 30 1.181 20 13.2 0.787 0.520 6 0.236 www.SunxSensors.com The CAD data in the dimensions can be downloaded from our website. <]j] <]j ! (800) 280-6933 FX-101(P)-Z FX-102(P)-Z 10.85 6 0.236 2.7 0.106 0.7 0.028 6 0.236 6 0.236 0.427 48 1.890 30 1.181 20 13.2 0.787 0.520 0.8 0.031 2.7 0.106 0.7 0.028 OFF key / Setting value DOWN key ON key / Setting value UP key MODE key 4.1 Operation indicator (Orange) 0.161 Digital display (Green, Red) ! OFF key / Setting value DOWN key ON key / Setting value UP key MODE key 4.1 Operation indicator (Orange) 0.161 Digital display (Green, Red) 0.75 0.030 0.75 0.030 !! 66.2 2.606 9 0.354 6 0.236 1.1 0.043 ! 7 0.276 4 0.157 10 6.5 0.256 < 4 0.157 3 0.118 o6.5 o0.256 10 30 0.3941.181 o3.2 o0.126 6.5 0.256 14.5 0.571 0.079 3.2 8.1 0.126 0.319 2 0.079 50 1.969 35 1.378 65.5 2.579 Suitable for 35 mm 1.378 in width DIN rail Suitable for 35 mm 1.378 in width DIN rail Note: The protection cover has been attached from the production at July, 2011. MS-DIN-4 Note: The protection cover has been attached from the production at July, 2011. | ^_ o7.2 mm o0.283 in spot facing, 4 0.157 deep < o3.2 o0.126 9.25 0.364 o6.2 mm o0.244 in spot facing, 3 0.118 deep 3.2 0.126 2.75 0.108 3 0.118 15 0.591 1 0.039 15 0.591 4 0.157 5 0.197 Material: PBT MS-DIN-E End plate (Optional) 7.2 mm 0.283 in spot facing, 4 0.157 deep M3 (Iength 18 mm 0.709 in) pan head screws 60 2.362 3 0.118 6.2 mm 0.244 in spot facing, 3 0.118 deep 3.2 0.126 o3.2 o0.126 M3 square nut 5.6 0.220 24.7 0.972 9 0.354 1.6 0.063 11.5 0.453 [ 0.8 0.031 10 < ! ![ 1 0.039 0.394 3.2 2 0.126 50 1.969 35 1.378 65.5 2.579 14.5 0.571 7 0.276 8.1 0.319 o3.2 o0.126 ! 3 0.118 0.394 6 0.236 1.1 0.043 2 0.079 10 30 0.394 1.181 0.8 0.031 66.2 2.606 9 0.354 2 0.079 1 0.039 24.5 0.965 35 1.378 32 1.260 4 0.157 Suitable for 35 mm 1.378 in width DIN rail Material: Polycarbonate < <]^< <]^<< (0.3158 ) 35 1.378 ( ) Connector attached cable (Optional) L ( FX-500 FX-100 INDEX ! ) (0.3158 ) o3.7 o0.146 cable CN-14A-C2 is attached FX-101(P)-CC2 / FX-102(P)-CC2 50 1.969 Model No. CN-14A(-R)-C1 CN-14A(-R)-C2 CN-14A(-R)-C3 CN-14A(-R)-C5 Length L 1,000 39.370 2,000 78.740 3,000 118.110 5,000 196.850 Ramco Innovations (800) 280-6933 www.SunxSensors.com 75 76 Ramco Innovations Fiber Guide Choose by model Choose by shape/ new models Fibers Super Quality Threaded Type ! Type Flat Type Small Spot Narrow Beam C CN-14A CN-14A-C1 CN-14A-C2 CN-14A-C3 CN-14A-C5 CN-14A-R-C1 CN-14A-R-C2 CN-14A-R-C3 CN-14A-R-C5 CN-71-C1 CN-71-C2 CN-71-C5 CN-72-C1 CN-72-C2 CN-72-C5 CN-73-C1 CN-73-C2 CN-73-C5 CN-74-C1 CN-74-C2 CN-74-C5 FX-100 Connector P.68 FX-100 Connector Attached Cable P.68/P.74 FX-100 Connector Attached Cable (Flexible) FX-500 Quick-connection Cable P.58/P.64 Wide Beam Type Type < resistant Heatresistant < resistant Liquid Leak / ![ Fiber Options Fiber Dimensions Thru-beam Type Type Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models table www.SunxSensors.com INDEX ! ! Fiber (800) 280-6933 F FB-1 FC-FX-1 FD-30 FD-31 FD-31W FD-32G FD-32GX FD-40 FD-41 FD-41S FD-41SW FD-41W FD-42G FD-42GW FD-60 FD-61 FD-61G FD-61S FD-61W FD-62 FD-64X FD-A16 FD-AL11 FD-E13 FD-E23 Fiber Bender FX-100 Protection Cover Super Quality Fiber Threaded Type Fiber Threaded / Small Spot Type Fiber P.14/P.33/P.51 P.68 P.9/P.42 P.11/P.42 P.11/P.18/P.42 Super Quality Fiber Threaded Type Fiber P.9/P.42 P.11/P.42 Sleeve Fiber P.15/P.42 Threaded Type Fiber P.11/P.42 Threaded / Small Spot Type Fiber Super Quality Fiber P.11/P.18/P.43 P.9/P.43 Threaded Type Fiber P.11/P.43 Sleeve Fiber P.15/P.43 Threaded Type Fiber P.11/P.43 P.11/P.44 Wide Beam Fiber P.20/P.44 Cylindrical / Sleeve Fiber P.13/P.15/P.44 FD-EG30 Threaded / Small Spot Type Fiber P.11/P.18/P.44 FD-EG30S Sleeve Fiber FD-EG31 Threaded / Small Spot Type Fiber P.11/P.18/P.45 FD-F4 FD-F41 FD-F41Y FD-F71 FD-F8Y FD-FA93 Liquid Leak / Liquid Detection Fiber P.28/P.45 P.15/P.45 FD-G40 FD-G60 FD-H13-FM2 FD-H18-L31 FD-H20-21 FD-H20-M1 FD-H25-L43 FD-H25-L45 FD-H30-KZ1V FD-H30-KZ1V-S FD-H30-L32 FD-H30-L32V FD-H30-L32V-S FD-H35-20S FD-H35-M2 FD-H35-M2S6 FD-HF40Y FD-L10 FD-L11 FD-L12W FD-L20H FD-L21 FD-L21W FD-L22A FD-L23 FD-L30A FD-L31A FD-L32H FD-R60 FD-S21 FD-S30 FD-S31 FD-S32 FD-S32W FD-S33GW FD-V30 FD-V30W FD-V50 FD-WZ4 FD-WZ7 FD-Z20HBW FD-Z40HBW FD-Z50HW FDP-1000 FDP-1500 FDP-500 FDP-N1000 FDP-N1500 FDP-N500 FR-KZ22E FR-KZ50E FR-KZ50H FR-Z50HW FT-140 FT-30 FT-31 FT-31S FT-31W FT-40 FT-41 FT-42 FT-42S Metal-free Fiber Heat-resistant Fiber P.10/Website P.25/P.46 Vacuum-resistant Fiber P.27/P.32 P.26/P.47 P.25/P.47 P.27/P.32 P.26/P.47 Heat-resistant Fiber P.25/P.47 Liquid Leak / Liquid Detection Fiber P.28/P.47 Convergent Reflective Type Fiber P.21/P.48 Vacuum-resistant Fiber Heat-resistant Fiber Threaded Type Fiber Cylindrical Fiber Super Quality Fiber P.21/P.49 P.11/P.49 P.13/P.49 P.9/P.49 Cylindrical Fiber P.13/P.49 Sleeve Fiber P.15/P.50 Flat Type Fiber P.17/P.50 Narrow Beam Fiber P.19/P.50 Protective Tube (For Reflective Type Fiber) P.33/P.51 Narrow Beam / Retroreflective Type Fiber Threaded Type Fiber Super Quality Fiber Threaded Type Fiber Sleeve Fiber Threaded Type Fiber Super Quality Fiber Metal-free Fiber Threaded Type Fiber Sleeve Fiber P.19/P.22/P.41 P.10/P.34 P.9/P.34 P.10/P.34 P.15/P.34 P.10/P.34 P.9/P.34 P.10/Website P.10/P.34 P.15/P.34 Ramco Innovations (800) 280-6933 77 www.SunxSensors.com INDEX FT-42W FT-43 FT-45X FT-A11 FT-A11W FT-A32 FT-A32W FT-AL05 FT-E13 FT-E23 FT-F93 FT-H13-FM2 FT-H20-J20 FT-H20-J20-S FT-H20-J30 FT-H20-J30-S FT-H20-J50 FT-H20-J50-S FT-H20-M1 FT-H20-VJ50 FT-H20-VJ50-S FT-H20-VJ80 FT-H20-VJ80-S FT-H20W-M1 FT-H30-M1V FT-H30-M1V-S FT-H35-M2 FT-H35-M2S6 FT-HL80Y FT-J8 FT-KS40 FT-KV26 FT-KV40 FT-KV40W FT-L80Y FT-R40 FT-R41W FT-R42W FT-S11 FT-S20 FT-S21 FT-S21W FT-S30 FT-S31W FT-S32 FT-V23 FT-V24W FT-V25 FT-V30 FT-V40 FT-V80Y FT-WZ4 FT-WZ7 FT-Z20HBW FT-Z30 FT-Z30E FT-Z30EW FT-Z30H FT-Z30HW FT-Z30W FT-Z40HBW FT-Z802Y ! ! Threaded Type Fiber P.10/P.34 P.10/P.35 Wide Beam Fiber P.20/P.35 FTP-1000 FTP-1500 FTP-500 FTP-N1000 FTP-N1500 FTP-N500 Protective Tube (For Thru-beam Type Fiber) FV-BR1 Photo-terminal for Vacuum-resistant Fiber P.27/P.32/P.51 Vacuum-resistant Expansion Lens Vacuum-resistant Side-view Lens P.27/P.31/P.51 Chemical-resistant Fiber P.23/P.37 Threaded Type Fiber P.10/P.37 Cylindrical Fiber Super Quality Fiber P.12/P.37 P.9/P.38 FV-LE1 FV-SV2 FX-101 FX-101-CC2 FX-101P FX-101P-CC2 FX-102 FX-102-CC2 FX-102P FX-102P-CC2 FX-501 FX-501P FX-502 FX-502P FX-505-C2 FX-505P-C2 FX-AT15A FX-AT2 FX-AT3 FX-AT4 FX-AT5 FX-AT6 FX-CT1 FX-CT2 FX-CT3 FX-LE1 FX-LE2 FX-MB1 FX-MR1 FX-MR2 FX-MR3 FX-MR5 FX-MR6 Cylindrical Fiber P.12/P.38 FX-SV1 Cylindrical / Sleeve Fiber Liquid Leak / Liquid Detection Fiber Heat-resistant Fiber P.12/P.15/P.35 P.28/P.35 P.24/P.35 P.25/P.32 P.24/P.36 P.25/P.32 P.24/P.36 P.25/P.32 P.24/P.36 P.25/P.32 P.24/P.36 P.25/P.32 P.24/P.36 Vacuum-resistant Fiber P.27/P.32 P.26/P.36 Heat-resistant Fiber P.24/P.36 Chemical-resistant Fiber P.23/P.36 Fiber for Atmospheric Side Narrow Beam Fiber Super Quality Fiber Cylindrical Fiber Sleeve Fiber Cylindrical Fiber Chemical-resistant Fiber P.27/P.32/P.51 P.19/P.37 P.33/P.51 Fiber Guide Choose by model Choose by shape/ new models Fibers P.68/P.74 Super Quality Threaded Type ! Type Digital Fiber Sensor Flat Type P.58/P.64 Small Spot Narrow Beam Fiber Single-core Holder P.33 Wide Beam Type Fiber Attachment P.32/P.52 Type < resistant Fiber Cutter P.32 P.32/P.52 P.32 Lens for Thru-beam Type Fiber P.30/P.52 FX-500 Fiber Amplifier Protection Seal Side-view Lens for Thru-beam Type Fiber < resistant Liquid Leak / ![ P.59 P.18/P.32/P.52 Lens for Reflective Type Fiber Heatresistant P.18/P.32/P.53 P.31/P.53 Fiber Options Fiber Dimensions Thru-beam Type P.9/P.38 Type P.12/P.38 Type P.15/P.38 P.12/P.39 P.23/P.39 M Flat Type Fiber P.16/P.40 P.23/P.40 Others MS-AJ1-F MS-AJ2-F MS-DIN-2 MS-DIN-4 Universal Sensor Mounting Stand MS-DIN-E End Plate MS-EX3 FX-MR2 Mounting Bracket MS-FD-2 P.16/P.39 Chemical-resistant Fiber Fiber MS-FD-3 MS-FD-F7-1 MS-FD-F7-2 MS-FX-01Y MS-FX-02Y MS-FX-03Y MS-FX-YF FX-500 Amplifer Mounting Bracket FX-100 Amplifer Mounting Bracket Fiber Mounting Bracket P.33 P.59/P.64 P.68/P.74 P.58/P.64/P.68/ P.74 P.53 Liquid Inflow Prevention Joint Protective Tube Extension Joint Fiber Mounting Joint Joint Internal Ferrulre FX-500 series FX-100 series P.27/P.32/P.53 P.53 FD-F71 SUS Mounting Bracket FD-F71 PVC Mounting Bracket Amplifiers INDEX P.29 P.29/P.33 Earlier models table 78 Ramco Innovations INDEX ! ! Fiber R RF-003 Fiber Guide Choose by model Choose by shape/ (800) 280-6933 RF-13 RF-210 RF-220 RF-230 FR-KZ50E/KZ50H Exclusive Reflector Reflective Tape Reflector P.32/P.53 P.32 P.22/P.33/P.54 new models S Fibers Super Quality Threaded Type ! Type Flat Type Small Spot Narrow Beam Wide Beam Type Type < resistant Heatresistant < resistant Liquid Leak / ![ Fiber Options Fiber Dimensions Thru-beam Type Type Type Others Amplifiers FX-500 series FX-100 series INDEX Earlier models table SC-SU1 Copy Unit P.68 www.SunxSensors.com Ramco Innovations (800) 280-6933 www.SunxSensors.com 79 80 Ramco Innovations Advantages of switching to recommended replacements Tough Fiber Choose by model { ' | | | * | | ' # Choose by shape/ application Subjected models Viewing new models Discontinued models Stopping taking order date : 31 Mar., 2012 Type Discontinued models Model No. Bending radius (mm) Shape of fiber head (mm) Fibers Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) Model No. Shape of fiber head (mm) Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 7RXJK Super Quality R25 FD-A15 Threaded Type - 200 7.874 FD-A16 Sleeve - 280 11.024 FD-AL11 R25 FD-AFM2E - 280 11.024 FD-AL11 M6 Wide Beam R25 FD-B8 - 490 19.291 FD-62 FD-E12 Chemicalresistant R10 15 3 - 12 0.472 R25 - 15 5 Sleevepartcannotbebent. Liquid Leak / Liquid Detection Highprecision*Coaxial LensmountableFX-MR3FX-MR6 Reflectivetype Vacuumresistant M3 55 2.165 R4 - 12 0.472 Split amplifier insertion section configuration Changed to integrated light emitting/receiving configuration R4 - 55 2.165 Split amplifier insertion section configuration Changed to integrated light emitting/receiving configuration M3 15 5 - Split amplifier insertion section configuration Changed to 48 integrated light emitting / receiving 1.890 configuration End bracket total length 17 mm Changed to 16 mm - Split amplifier insertion section configuration Changed to integrated 20 light emitting/receiving configuration End bracket total length 17 mm 0.787 Changed to 16 mm Protective tube outside diameter o1.6 Changed to o1.2 R4 - Split amplifier insertion section configuration Changed to integrated 20 light emitting/receiving configuration End bracket total length 17 mm 0.787 Changed to 16 mm Protective tube outside diameter o1.6 Changed to o1.2 R4 - 50 1.969 Split amplifier insertion section configuration Changed to integrated light emitting /receiving configuration Sleeve size o0.5 Changed to o0.8 R4 - 50 1.969 Split amplifier insertion section configuration Changed to integrated light emitting/receiving configuration Sleevepartcannotbebent. Coaxial,Lensmountable R25 Highprecision*Coaxial LensmountableFX-MR3FX-MR6 Lightemittingfiberelement0.175 15 3 FD-E23 - 40 1.575 M3 R4 FD-EG30 16 17 FD-EG2 End bracket total length for the M6 part only: 15 mm Changed to 17 mm (M6 part/15 mm + o4.5 area/2 mm ) Coaxial,Lensmountable R10 - 24 0.945 M3 R4 FD-EG31 16 17 Thru-beam Type Highprecision*Coaxial LensmountableFX-MR3FX-MR6 Lightemittingfiberelement0.125 Type Type FD-EG3 Coaxial,Lensmountable R10 M3 - 20 0.787 M3 FD-EG31 16 17 Others M3 FD-EN500S1 FX-500 series Sleeve15mm 0.5 15 15 R25 - - Coaxial M3 15 15 - 50 1.969 Sleeve15mm FD-EG30S FD-F705 INDEX R4 (Protective Liquidleak tube detection R20) R10 W6.5xH28.3xD17 0.8 15 7RXJK Liquid - detection SEMIS2compliant W20xH30xD10 FD-F71 7RXJK Mountableonpipe*Arrayfiber FD-FA90 M3 Sleevepartcannotbebent. Sleevepartcannotbebent. W20xH30xD10 0.8 15 R25 SEMIS2compliant M3 Sleevepartcannotbebent. 0.8 FD-ENM1S1 FX-100 series Earlier models comparison table FD-EG30S Sleevepartcannotbebent. Amplifiers Cable lead out orientation changed 320 Metal casing material (brass) 12.598 Changed to plastic (PPS) 3 0.65 30.65 FD-E22 Fiber Dimensions 520 20.472 320 Cable lead out orientation changed Metal case material (brass) 12.598 Changed to plastic (PPS) Sleevepartcannotbebent. Coaxia FD-EG1 1.5 0.48 FD-E13 Sleevepartcannotbebent. Heatresistant R4 17 1.50.5 Retroreflective Type M6 15 Convergent Reflective Type R2 W5xH20xD20 W5xH20xD20 Narrow Beam 7RXJK Sidesensing Small Spot R2 W5xH20xD20 W5xH20xD20 Flat Type 7RXJK R25 FD-AFM2 200 7.874 R4 W7xH15xD30 W7xH15xD30 Topsensing Cylindrical Type Fiber Options www.SunxSensors.com Earlier Models Comparison Table New product introduction Fiber Selection Guide (800) 280-6933 R4 (Protective Liquidleak tube detection R20) Arrayfiber R4 FD-FA93 W6.5xH28.3xD17 Liquid detection Ramco Innovations (800) 280-6933 www.SunxSensors.com Earlier Models Comparison Table Type Discontinued models Model No. Bending radius (mm) Shape of fiber head (mm) New product introduction Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) Model No. Shape of fiber head (mm) Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 7RXJK M6 FD-61 Coaxial M6 R25 FD-FM2 - 420 16.535 20 R4 Coaxial M6 R4 FD-61G 17 Sleeve90mm FD-FM2S M6 2.5 20 7RXJK R25 Sleeve - R10 380 14.961 FD-61S R25 Sleeve - R10 380 14.961 FD-61S M6 2.5 20 FD-G4 R25 M4 - 140 5.512 M6 2.5 FD-42G 420 16.535 End bracket total length of 20 mm for the (M6 part/15 mm + o3.5 area/5 mm) Changed to 17 mm (M6 part/15 mm + o4.5 area/2 mm) R4 420 The sleeve length 90 mm type Sleeve 16.535 supports semi-custom products. R10 Sleeve40mm M6 2.5 20 7RXJK Minuteobjectscanbedetected duetothesmallspotbeam. Coaxial*Lensmountable FX-MR1/MR2/MR3/MR5/MR6 End bracket total length of 20 mm for the (M6 part/15 mm + o3.5 area/5 mm) 450 Changed to 17 mm (M6 part/15 mm 17.717 + o4.5 area/2 mm) Coaxial cable used for wiring Changed to parallel type Sleeve40mm 20 7RXJK Sleeve40mm FD-FM2S4 17 7RXJK R4 420 Sleeve 16.535 R10 M4 FD-G6 M3 R2 25 7RXJK R25 - 140 5.512 200 7.874 FD-G6X M3 R25 - 170 6.693 Coaxial*Lensmountable M3 R2 FD-32G 200 7.874 - Stainless steel mesh jacket 200 covering the stainless steel spiral tube used as a protective cover for 7.874 the fiber Changed to plastic (polyolefin) 17 Coaxial*Lensmountable Stainless-jacketed M3 FD-32GX 18 W6xH18xD14 FD-L4 15.5 0.610 R25 - R10 1.5to16 - 0.059to 0.630 R2 18 7RXJK FD-L20H Reflectivetype FD-L41 W24xH21xD4 R4 FD-L43 - 0to24 0to0.945 FD-L21 R10 FD-L44 - R10 FD-L44S - 0to5 0to0.197 23 0.906 - 0to40 0to1.575 R25 FD-L45A W23.5xH29xD4.5 Glasssubstratedetection* Mapping R25 FD-L46 1to56 - 0.039to 2.205 W25xH7.3xD30 Glasssubstratedetection* Seatingconfirmation R4 FD-L47 - - 17 Sleeve90mm M4 FD-NFM2S 12 1.48 R25 Sleeve - R10 120 4.724 Vacuumresistant Liquid Leak / Liquid Detection Thru-beam Type FD-L31A Type Type 0to43 0to1.693 R4 R4 Previous no flexing distance 4to33 specifications Specification wording changed to state flexing 2 degrees 0.157to (Reference: Discontinued model 2 1.299 degrees specification is 10 mm to 32 mm) Alignment W23.5xH29xD4.5 Others Amplifiers FX-500 series FX-100 series Mapping R4 FD-L32H 0to56 0to2.205 0to29 0to1.142 W25xH7.3xD30 INDEX Seatingconfirmation R2 FD-L23 7RXJK M4 R2 FD-41 14 7RXJK 120 4.724 Heatresistant 0to5 0to0.197 W18xH29xD3.8 R25 FD-NFM2 Chemicalresistant Fiber Dimensions W20xH29xD3.8 W18xH29xD3.8 M4 Retroreflective Type 0to9.5 0to0.374 Alignment FD-L30A 7RXJK 0to29 0to1.142 Convergent Reflective Type 7RXJK 4to44 - 0.157to 1.732 Wide Beam R4 R4 W20xH29xD3.8 Glasssubstratedetection* Alignment Narrow Beam Fiber Options W12xH19xD3 R4 FD-L45 Flat Type 0to24 0to0.945 Seatingconfirmation FD-L10 7RXJK Cylindrical Type W12xH19xD3 W12xH19xD3 Glasssubstratedetection* Alignment Threaded Type R2 Seatingconfirmation FD-L11 7RXJK Super Quality R2 W17xH29xD3.8 W12xH19xD3 Glasssubstratedetection* Seatingconfirmation Fibers Alignment FD-L22A 7RXJK 0to9.5 0to0.374 Viewing new models 1.5to16 0.059to 0.630 W24xH21xD4 W17xH29xD3.8 Glasssubstratedetection* Seatingconfirmation Choose by shape/ application 7RXJK 7RXJK Glasssubstratedetection* Alignment Choose by model R2 W6xH18xD14 Glasssubstratedetection Fiber Selection Guide Small Spot 17 Metal-jacketed LensmountableFX-MR3FX-MR6 Coaxial Tough Fiber Sleeve Coaxial*Lensmountable 25 LensmountableFX-MR3FX-MR6 Coaxial 81 End bracket total length of 17 mm for 125 the (M4 part/12 mm + o2.5 area/5 mm) 4.921 Changed to 14 mm (M4 part/12 mm + o2.5 area/2 mm) Sleeve40mm M4 FD-41S 12 1.48 R2 Sleeve R10 125 The sleeve length 90 mm type 4.921 supports semi-custom products. Earlier models comparison table 82 Ramco Innovations www.SunxSensors.com Earlier Models Comparison Table New product introduction Discontinued models Type Tough Fiber (800) 280-6933 Model No. Fiber Selection Guide Shape of fiber head (mm) Sleeve40mm Choose by model FD-NFM2S4 Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) R25 Sleeve - R10 M4 12 Choose by shape/ application Bending radius (mm) 1.48 Model No. 7RXJK 120 4.724 Shape of fiber head (mm) Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) Sleeve40mm M4 FD-41S 12 R2 Sleeve R10 1.48 7RXJK Viewing new models 1.5 R4 FD-P2 15 80 3.150 Fibers FD-S21 1.5 Split amplifier insertion section configuration Changed to integrated 80 light emitting/receiving configuration End bracket total length 15 mm 3.150 Changed to 10 mm PVC outer covering material for fiber Changed to PE R2 End bracket shape is 12 mm for the M3 part only Changed to a total length 125 of 12 mm (M3 part/10 mm + o2 area/2 4.921 mm ) PVC outer covering material for fiber Changed to PE R4 R2 10 7RXJK Super Quality M3 R4 FD-P40 Threaded Type 12 Cylindrical Type FD-31 120 4.724 FD-S32 12 7RXJK 3 R4 FD-P50 Sleeve 45 1.772 M3 15 Flat Type 3 15 15 R4 FD-P60 Narrow Beam M4 120 4.724 Wide Beam M4 End bracket total length of 15 mm for 450 the M6 part only Changed to 17 mm (M6 part/15 mm + o4.5 area/2 mm) 17.717 PVC outer covering material for fiber Changed to PE R4 - End bracket total length of 19 mm for the (M6 part/15 mm + crimped area/4 mm) Changed to 22 mm (o4.5 area/2 mm + M6 part/15 mm + crimped area/5 mm) 280 Split amplifier insertion section 11.024 configuration Changed to integrated light emitting/receiving configuration Stainless steel mesh jacket covering the stainless steel spiral tube used as a protective cover for the fiber Changed to plastic (polyolefin) R4 290 11.417 R4 420 16.535 R2 FD-41 FD-P80 Retroreflective Type M6 R4 280 11.024 14 M6 R4 FD-61 17 15 Chemicalresistant Heatresistant Vacuumresistant Reflectivetype FD-P81X Stainless-jacketed Metal-jacketed M6 R10 FD-64X 220 8.661 FD-R60 7RXJK 15 R25 - M6 Thru-beam Type R25 FD-S80 - 15 M6 FD-S32 15 0.8 R25 - 120 4.724 15 FD-V50 2.3 2 R4 R2 125 4.921 End bracket shape is 8 mm for the o2.5 part only Changed to 10 mm (o3 part/ 8 mm + o2 area/2 mm) R2 125 4.921 End bracket shape is 12 mm for the M3 part only Changed to a total length of 12 mm (M3 part /10 mm + o2 area/2 mm) End bracket shape is 12 mm for the M4 part only Changed to a total length 450 of 17 mm (M6 part/15 mm + o4.5 17.717 area/2 mm) Fiber cable outside diameter o1.3 Changed to o2.2 R2 End bracket total length is 12 mm for 125 the M4 part only Changed to 14 mm (M4 part/12 mm + o2.5 area/2 mm) 4.921 Fiber cable outside diameter o1.3 Changed to o1 R2 From sleeve end to optical axis 65 center position is 0.7 mm Changed to 2 mm 2.559 End sleeve length of 10 mm Changed to 15 mm 7RXJK 2.5 R25 FD-SNFM2 - 8 120 4.724 FD-S31 120 4.724 FD-31 M3 10 7RXJK M3 R25 FD-T40 FX-100 series 5 From sleeve end to optical axis center position is 0.8 mm 120 Changed to 2.3 mm 4.724 A D-shaped surface that makes it easy to align with the optical axis has been added 20 Sleevepartcannotbebent. Sleevepartcannotbebent. Amplifiers 3 7RXJK 52 Others FX-500 series 380 14.961 15 20 FD-SFM2SV2 15 7RXJK 3 Type Type 22 15 FD-R80 Fiber Dimensions M6 270 - 10.630 - 12 M3 12 7RXJK M6 R4 FD-61 INDEX 17 M4 R25 FD-T80 - 12 380 14.961 7RXJK M4 Earlier models comparison table FD-41 14 1510 FD-V41 3 1.5 End bracket total length of 15 mm for the (M4 part/12 mm + o3 area/3 mm) Changed to 14 mm (M4 part/12 mm + o2.5 area/2 mm) PVC outer covering material for fiber Changed to PE 125 4.921 7RXJK Convergent Reflective Type Fiber Options 420 PVC outer covering material for 16.535 fiber Changed to PE 7RXJK Small Spot Liquid Leak / Liquid Detection 125 4.921 7RXJK Smalldiameter 0.7 Sleevepartcannotbebent. R25 - 65 2.559 FD-V30 Smalldiameter 15 15 3 1.5 2 Sleevepartcannotbebent. Ramco Innovations (800) 280-6933 www.SunxSensors.com Earlier Models Comparison Table Type Discontinued models Model No. Bending radius (mm) Shape of fiber head (mm) Model No. 7RXJK R1 Sleeve - R10 M4 12 Shape of fiber head (mm) M4 1.48 7RXJK R1 Sleeve - R10 1.48 M6 FD-61 R1 - 15 R1 270 - 10.630 R2 200 7.874 17 7RXJK FD-WG4 M4 FD-42G R2 - Viewing new models End bracket total length is 15 mm for the M6 part only Changed to 17 mm (M6 part/ 15 mm + o4.5 area/2 mm) End bracket total length is 15 mm for the M6 part only Changed to 17 mm (M6 part/ 15 mm + o4.5 area/2 mm) Sleeve M4 150 5.906 R1 - R1 10to650 Stainless steel unit casing material - 0.394to Changed to plastic (PC) 25.591 R2 1.5to16 0.059to 0.630 R1 3to14 0.118to 0.551 Small Spot 25 R1 FD-WKZ1 W5.2xH9.5xD15 20to490 - 0.787to 19.291 W5.2xH9.5xD15 FD-Z50HW 7RXJK FD-L21 Glasssubstratedetection R1 FD-WL41 W24xH21xD4 2.5to14 - 0.098to 0.551 W24xH21xD4 FD-L21W - Reflectivetype W24xH21xD4 R1 FD-WL48 - W7.2xH7.5xD2 7.5 0.295 FD-L12W R1 FD-WS8 - 15 250 9.843 3 Coaxial 3 R2 - 150 5.906 420 16.535 R1 - 270 10.630 R1 - 150 5.906 R2 125 4.921 End bracket total length is 12 mm for the M3 part only Changed to 12 mm (M3 part/ 10 mm + o2 area /2 mm) Type - 80 3.150 End bracket total length is 12 mm for the M3 part only Changed to 12 mm (M3 part/ 10 mm + o2 area/ 2 mm) Others R1 125 4.921 End bracket total length is 12 mm for the M4 part only Changed to 14 mm (M4 part/12 mm + o3 area/ 2 mm) Amplifiers R2 R1 270 - 10.630 End bracket total length is 12 mm for the M4 part only Changed to 14 mm (M4 part/12 mm + o3 area/ 2 mm) 7RXJK M3 R1 FD-WT4 - 12 M3 12 80 3.150 FD-31W M3 12 7RXJK M4 FD-41 M4 R1 FD-WT8 - 14 14 250 9.843 M4 FD-41W 14 7RXJK FD-V30 3 2 2 R2 Sleevepartcannotbebent. 1515 FD-WV42 Smalldiameter 15 15 3 1.5 1 R1 - 16 0.630 Sleevepartcannotbebent. FD-V30W 15 3 15 1.5 2 Sleevepartcannotbebent. Heatresistant 15 FD-31 Chemicalresistant R4 Coaxial 3 15 Retroreflective Type 8 0.315 3 FD-S33GW Convergent Reflective Type - 15 FD-WSG4 Wide Beam R1 15 FD-S32W Narrow Beam Vacuumresistant W7.2xH7.5xD2 7RXJK FD-S32 3 Threaded Type Flat Type Coaxial*Lensmountable FD-42GW Longsensingrange* Rectangularhead Super Quality Cylindrical Type Coaxial*Lensmountable M4 Fibers 25 150 5.906 25 450 17.717 M6 FD-61W Minuteobjectscanbedetected duetothesmallspotbeam. Coaxial*Lensmountable FX-MR1/MR2/MR3/MR5/MR6 Fiber Selection Guide Choose by model 80 3.150 R4 17 250 9.843 Tough Fiber Choose by shape/ application M4 12 M6 125 4.921 Sleeve40mm FD-41SW FD-W8 Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) R2 Sleeve R10 1.48 12 80 3.150 Bending radius (mm) Sleeve40mm FD-41S Sleeve40mm FD-W44 New product introduction Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) 83 R1 - Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type From sleeve end to optical axis center position is 1 mm Changed to 2 mm 65 End sleeve thickness of o2 Changed to o1.5 2.559 A D-shaped surface that makes it easy to align with the optical axis has been added From sleeve end to optical axis center position is 1 mm Changed to 2 mm 20 End sleeve thickness of o2 Changed to o1.5 0.787 A D-shaped surface that makes it easy to align with the optical axis has been added Type FX-500 series FX-100 series INDEX Earlier models comparison table 84 Ramco Innovations Type Discontinued models Model No. Fiber Selection Guide Choose by shape/ application Viewing new models Shape of fiber head (mm) FD-WZ4HB Bend- Sensing ing range dura- FX-500 bility STD (mm in) R1 2.5to65 - 0.098to 2.559 W2xH10xD10 Fiberbendingtype R1 FD-WZ7HB Recommended replacements Bending radius (mm) Fiberbendingtype Reflectivetype Choose by model W3.5xH14xD11 1to150 - 0.039to 5.906 Fibers FR-KV1 Flat Type Retroreflective type Sleeve - R10 20to200 - 0.787to 7.874 FR-KZ21 R10 20to200 - 0.787to 7.874 R1 100to990 - 3.937to 38.976 W10.6xH28xD10.1 W9.5xH25xD5.2 FR-KZ21E W10.6xH28xD10.1 FR-WKZ11 W30xH30xD0.5 Wide Beam Retroreflective Type Sensing width 32 mm R10 - W5xH69xD20 Chemicalresistant Wide area sensing Sensing width 11 mm Heatresistant FT-A8 W4.2xH31xD13.5 Topsensing 3600 141.732 R10 3600 - 141.732 R25 - W5xH15xD15 FT-AFM2 860 33.858 Sidesensing W5xH15xD15 Fiber Options FT-B8 Others R1 2to85 - 0.079to 3.346 R1 - 260 10.236 R2 15to310 Unit side installation screw 0.591to positions have been moved back 1 12.205 mm from the front edge R2 20to300 0.787to 11.811 R2 20to300 0.787to 11.811 R1 100to990 3.937to 38.976 R2 Fiber cable outside diameter o2.2 3600 Changed to o1.3 141.732 Optical cable diameter of 3 x 32 Changed to 3.2 x 32 R2 3600 Fiber cable outside diameter o2.2 141.732 Changed to o1.3 R2 860 Cable lead out orientation changed Metal casing material (brass) 33.858 Changed to plastic (PPS) R2 860 Cable lead out direction changed Metal casing material (brass) 33.858 Changed to plastic (PPS) R4 W2xH10xD10 FD-Z40HBW W3.5xH14xD11 W7.5xH2.2xD11.2 FR-KZ22E 7RXJK W9.5xH5.2xD21 FR-KZ50H W10.6xH28xD10.1 7RXJK W9.5xH25xD5.2 FR-KZ50E W28xH10.6xD10.1 W5.2xH9.5xD16 FR-Z50HW W30xH30xD0.5 FT-A32 - 860 33.858 Sensing width 32 mm W5xH69xD20 FT-A11 7RXJK FT-AL05 Sensing width 11 mm W4.2xH31xD13.5 Sensing width 5.5 mm W5xH15xD15 7RXJK FT-AL05 Sensing width 5.5 mm W5xH15xD15 Lensmountable Lensmountable FX-LE1/LE2/SV1 M4 R25 - 1250 49.213 M4 FT-43 15 Beamdia.0.125mm 0.253 FT-E12 Sleevepartcannotbebent. Set length type Changed to free cut type 75 Fiber cable outside diameter o1.2 Changed to o1 2.953 End bracket length of 10 mm Changed to 15 mm 0.253 R5 - - R2 FT-E13 Beamdia.0.25mm 5 15 7RXJK 0.43 5 10 Amplifiers FT-F902 FX-100 series Mountableonpipe SEMIS2compliant W23xH20xD17 R5 - - R2 FT-E23 5 15 Sleevepartcannotbebent. R4 Liquid (Protective tube detection R20) 7RXJK M14 R25 19600 - 771.654 SEMIS2compliant W23xH20xD17 FT-F93 7RXJK Withlens FT-FM10L Beamdia.0.25mm 0.43 Sleevepartcannotbebent. M14 FT-140 M4 FT-FM2 R25 - 1100 43.307 Sleeve90mm M4 FT-FM2S 1.48 12 Sleeve40mm M4 FT-FM2S4 1.48 12 19600 771.654 R4 1130 44.488 Lensmountable M4 FT-42 15 15 Earlier models comparison table R4 40 7RXJK Lensmountable FX-LE1/LE2/SV1 R2 Liquid (Protective tube detection R20) Withlongrangelens 23 INDEX 7RXJK R25 1100 Sleeve - 43.307 R10 FT-42S R25 1100 Sleeve - 43.307 R10 FT-42S Sleeve40 R4 1130 The sleeve length 90 mm type Sleeve 44.488 supports semi-custom products. R10 12 M4 1.48 7RXJK 1400 55.118 Fiber length 500 mm /set length type Changed to fiber length 1 m/free cut type 15 Fiber cable outside diameter o1.2 0.591 Changed to o1 End bracket length of 10 mm Changed to 15 mm Beamdia.0.125mm Sleevepartcannotbebent. FT-E22 FX-500 series Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) Fiberbendingtype 7RXJK Thru-beam type Type FD-Z20HBW 15 Thru-beam Type Type R25 FT-AFM2E Fiber Dimensions Fiberbendingtype 7RXJK Vacuumresistant Liquid Leak / Liquid Detection Bending radius (mm) 7RXJK Wide area sensing FT-A30 Shape of fiber head (mm) W4xH2xD21.5 W9.5xH5.2xD15 Convergent Reflective Type Model No. W4xH2xD21.5 W9.5xH5.2xD21 Small Spot Narrow Beam 20to310 0.787to 12.205 R10 Super Quality Cylindrical Type 7RXJK W7.5xH2.2xD11.2 Threaded Type www.SunxSensors.com Earlier Models Comparison Table New product introduction Tough Fiber (800) 280-6933 Sleeve40 M4 1.48 R4 1130 Sleeve 44.488 12 R10 Ramco Innovations (800) 280-6933 www.SunxSensors.com Earlier Models Comparison Table Type Discontinued models Shape of fiber head (mm) Model No. 3.53.7 FT-K8 Bend- Sensing ing range dura- FX-500 bility STD (mm in) R25 3600 - 141.732 20 W2xH1.5xD20 R10 2 FT-KV1 New product introduction Recommended replacements Bending radius (mm) 540 - 21.260 Model No. Shape of fiber head (mm) 7RXJK FT-KS40 7RXJK 2 R25 - 3 3600 141.732 FT-KV40 3 M3 R25 - 15 10 Sleeve40mm M3 FT-NFM2S4 0.88 10 310 12.205 7RXJK R25 310 Sleeve - 12.205 R10 FT-31S 330 12.992 FT-S21 10 R2 12 FT-31S R4 M3 FT-31 R25 310 Sleeve - 12.205 R10 1.5 FT-P2 R2 Fiber cable outside diameter o2.2 Changed to o1 3600 Metal end material (stainless steel) 141.732 Changed to plastic (LCP), set screw fastening specifications Changed to MS-FD-3 fastener specifications 7RXJK FT-NFM2 0.88 25 25 7RXJK Sleeve40 M3 0.88 10 Sleeve40 M3 0.88 7RXJK 10 1.5 R2 Sleeve R10 315 The sleeve length 90 mm type 12.402 supports semi-custom products. R2 Sleeve R10 315 12.402 R4 FT-P40 10 160 6.299 Fiber length 1 m/Set length type 315 Changed to fiber length 2 m/free cut type 12.402 Fiber exterior cover material of PVC Changed to PE R2 End bracket total length of 10 mm for 315 the M3 part Changed to 12 mm (M3 part/10 mm + o2 area/2 mm) 12.402 Fiber exterior cover material of PVC Changed to PE R4 Fiber exterior cover material of 1130 PVC Changed to PE 44.488 Fiber cable outside diameter o1.25 Changed to o2.2 M4 R4 Thru-beam type FT-P60 350 13.780 Lensmountable M4 FT-42 15 15 7RXJK LensmountableFX-LE1/LE2/SV1 M4 FT-P80 R4 810 31.890 Lensmountable M4 R4 FT-42 M4 FT-P81X R10 - 1 R4 6 880 34.646 90 3.543 - Stainless steel mesh jacket covering 1200 the stainless steel spiral tube used as 47.244 a protective cover for the fiber Changed to plastic (polyolefin) M4 R4 FT-45X 20 7RXJK FT-S11 14 R25 - 1 780 30.709 FT-R40 R25 - 1100 43.307 FT-S32 8 2.5 - 2600 102.362 FT-S32 8 570 22.441 FT-V30 1.52.5 FT-SFM2SV2 0.8 Sleevepart cannotbebent. R25 - 1.5 R25 FT-SNFM2 - 8 310 12.205 R10 3100 122.047 From sleeve end to optical axis center 680 position is 0.8 Changed to 1.3 mm 26.772 D-shaped surface that makes it easy to align with the optical axis has been added FX-100 series R4 R2 315 End bracket total length of o1.5 /8 mm Changed to 12 mm (o1 12.402 area/2 mm + o1.5/8 mm) INDEX R4 End bracket total length of 12.5 mm for the (M2.6 part/2.5 mm + M3 part/10 1130 mm) Changed to 15 mm (M2.6 part 44.488 /3 mm + M4 part/12 mm) Fiber cable outside diameter o1.3 Changed to o2.2 R4 10 7RXJK Lensmountable FX-LE1/SV1 M3 FT-T80 R25 - Lensmountable M4 1100 43.307 FT-42 3500 137.795 FT-V40 15 12.5 4 FT-V10 R25 3 25 - 7RXJK 4 3 25 Fiber Options End bracket total length of 14 mm for the (M2.6 part/3 mm + M4 part/11 mm) Changed to 15 mm (M2.6 part/3 mm + M4 part/12 mm) Type Type Others 20 15 1.5 Liquid Leak / Liquid Detection 3100 Optical cable diameter of o1 122.047 Changed to o2.2 1.52.5 FT-S21 Vacuumresistant 8 7RXJK Heatresistant R10 2.5 Sleevepart cannotbebent. Chemicalresistant 930 36.614 8 20 15 Retroreflective Type 2.5 1.3 Convergent Reflective Type R4 15 7RXJK Wide Beam Thru-beam Type Longsensingrange*withlens R25 Sleeve Flat Type M4 Longsensingrange*withlens FT-SFM2L Cylindrical Type Fiber Dimensions Longsensingrange*withlens 2.5 FT-SFM2 Threaded Type R2 Lensmountable M4 Super Quality 90 3.543 6 7RXJK LensmountableFX-LE1/LE2 FT-R80 1130 Fiber exterior cover material of 44.488 PVC Changed to PE Lensmountable*Stainless-jacketed 20 FT-PS1 15 15 LensmountableFX-LE1/LE2/SV1 Metal-jacketed Fibers Narrow Beam 12 7RXJK LensmountableFX-LE1/LE2/SV1 M3 FT-31 Choose by model Small Spot R2 10 Fiber Selection Guide Viewing new models End bracket total length of 15 mm for 315 the (M3 part/10 mm + o2 area/5 mm 12.402 Changed to 12 mm (M3 part/10 mm + o2 area/2 mm) 7RXJK M3 710 27.953 R2 20 Tough Fiber Choose by shape/ application 1.5x2 4 FT-KV8 M3 R2 3600 Fiber cable outside diameter o2.2 141.732 Changed to o1 7RXJK Side-viewtypewithsmalllight dispersion 4 FT-NFM2S Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 3.5 3.7 20 Sleeve90mm Bending radius (mm) 20 FT-KV26 85 3500 137.795 Amplifiers FX-500 series Earlier models comparison table 86 Ramco Innovations www.SunxSensors.com Earlier Models Comparison Table New product introduction Discontinued models Type Tough Fiber (800) 280-6933 Model No. Shape of fiber head (mm) Bending radius (mm) Fiber Selection Guide Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) Model No. Shape of fiber head (mm) Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 7RXJK Choose by model 1 2 FT-V22 Choose by shape/ application R2 End bracket outside diameter of 240 o2.5 Changed to o2 From sleeve end to optical axis 9.449 center position is 0.6 Changed to 1 mm R2 End bracket total length of 15 mm for the (M3 part/10 mm + crimped 315 area/5 mm) Changed to 12 mm 12.402 (o2 area/2 mm + M3 part/10 mm) Fiber cable outside diameter o2.2 Changed to o1 R1 260 - 10.236 R4 1130 44.488 R1 - 800 31.496 R2 Fiber cable outside diameter o2.2 3600 Changed to o1.3 141.732 Optical cable diameter of 3 x 32 Changed to 3.2 x 32 R1 - Fiber cable outside diameter o2.2 3600 Changed to o1.3 141.732 Optical cable diameter of 3 x 32 Changed to 3.2 x 32 R2 3600 Fiber cable outside diameter o2.2 141.732 Changed to o1.3 R1 - 3600 Fiber cable outside diameter o2.2 141.732 Changed to o1.3 R2 Fiber cable outside diameter o2.2 Changed to o1 3600 Metal end material (stainless steel) Changed to plastic (LCP), set screw 141.732 fastening specifications Changed to MS-FD-3 fastener specifications R1 Fiber cable outside diameter o2.2 Changed to o1 3600 Metal end material (stainless steel) - Changed to plastic (LCP), set screw 141.732 fastening specifications Changed to MS-FD-3 fastener specifications R1 - 800 31.496 R1 - 2200 86.614 R1 - 800 End bracket total length of 15 mm 31.496 Changed to 10 mm 1 2 0.6 Sleevepart cannotbebent. Fiber length 1 m/Set length type Changed to fiber length 2 m/free cut type 450 From sleeve end to optical axis center 17.717 position is 0.6 Changed to 1.1 mm D-shaped surface that makes it easy to align with the optical axis has been added R25 - 300 11.811 1.1 FT-V23 R4 Sleevepart cannotbebent. 20 15 20 15 Viewing new models 7RXJK 12.5 FT-V41 0.6 Sleevepart cannotbebent. Fibers R25 - 200 7.874 1 FT-V25 Sleevepart cannotbebent. 10 15 Super Quality 1 2 15 15 7RXJK Threaded Type M3 FT-31 Cylindrical Type 12 M3 R1 FT-W4 Sleeve - 15 250 9.843 Flat Type M3 FT-31W Small Spot 12 Narrow Beam 7RXJK Wide Beam Convergent Reflective Type M4 FT-W8 R10 - M4 15 7RXJK Heatresistant Sensing width 32 mm FT-A32 Thru-beam type Fiber Options Lensmountable FT-42W Chemicalresistant Liquid Leak / Liquid Detection M4 15 790 31.102 15 Retroreflective Type Vacuumresistant Lensmountable FT-42 Lensmountable FX-LE1/LE2/SV1 W5xH69xD20 FT-WA30 Sensing width 32 mm R1 W5xH69xD20 3600 - 141.732 Sensing width 32 mm FT-A32W W5xH69xD20 7RXJK Sensing width 11 mm FT-A11 Fiber Dimensions Thru-beam Type Sensing width 11 mm R1 FT-WA8 - W4.2xH31xD13.5 W4.2xH31xD13.5 3600 141.732 Type Sensing width 11 mm FT-A11W W4.2xH31xD13.5 Type Others 7RXJK 4 FT-KV40 Amplifiers 4 R1 FT-WKV8 - 3 FX-500 series FT-KV40W R1 FT-WR80 - W7xH9xD13.9 3 25 M4 660 25.984 FT-R41W 2200 86.614 FT-R42W W7xH9xD13.9 Withlens Withlongrangelens M4 R1 FT-WR80L - W7xH9xD14.6 FT-WS3 25 4 25 M4 Earlier models comparison table 3 3600 141.732 FX-100 series INDEX End bracket total length of 15 mm for the (M3 part/10 mm + crimped area/5 mm) Changed to 12 mm (o2 area/2 mm + M3 part/10 mm) Fiber cable outside diameter o2.2 Changed to o1 3 15 M4 W7xH9xD14.4 R1 - 790 31.102 FT-S31W 3 10 Ramco Innovations (800) 280-6933 www.SunxSensors.com Earlier Models Comparison Table Type Discontinued models Model No. Shape of fiber head (mm) Bending radius (mm) New product introduction Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) Model No. Shape of fiber head (mm) 7RXJK 1.5 FT-S21 1.5 FT-WS4 R1 - 8 Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) R2 315 End bracket shape of o1.5/8 mm Changed to 10 mm (o1 part/2 12.402 mm + o1.5 part/8 mm) R1 260 End bracket shape of o1.5/8 mm - Changed to 10 mm (o1 part/2 10.236 mm + o1.5 part/8 mm) R1 - 10 250 9.843 1.5 FT-S21W 10 2.5 R1 FT-WS8 - 8 790 31.102 10 Longsensingrange*withlens 3 R1 FT-WS8L 3 FT-S31W Longsensingrange*withlens - 8 3300 129.921 2.5 FT-S32 7RXJK 1 2 FT-WV42 1 R1 - 15 15 Sleevepartcannotbebent. Sleevepart cannotbebent. 100 3.937 FT-V24W W2xH10xD10 R1 - 210 8.268 - 790 31.102 R1 Thru-beam type W8.5xH12xD3 R1 W2xH10xD10 FT-Z40HBW Topsensing - 1300 51.181 W3xH12xD8 R1 - 800 31.496 R2 2100 Black casing color Changed to translucent, protective seal 82.677 eliminated W8.5xH12xD3 Sidesensing R1 3400 - 133.858 Sidesensing 7RXJK R1 - 3300 129.921 Topsensing Topsensing 7RXJK W8.5xH12xD3 R4 1200 47.244 W3xH12xD8 2000 78.740 R4 R4 2100 82.677 Topsensing FT-Z30H Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Sidesensing Topsensing Liquid Leak / Liquid Detection R2 3500 137.795 Fiber Options R1 - 3400 133.858 R2 3500 137.795 Fiber Dimensions Thru-beam Type Type Type R1 - 3500 137.795 Others R2 2100 Black casing color Changed to translucent, protective seal 82.677 eliminated Amplifiers W8.5xH12xD3 FX-500 series W3xH12xD8 FT-Z30E 7RXJK Topsensing Viewing new models 1500 Black casing color Changed to translucent, protective seal 59.055 eliminated W3xH8xD12 FT-Z30 7RXJK Sidesensing Choose by shape/ application - W3xH8xD12 FT-Z30HW Topsensing Choose by model W3xH12xD8 FT-Z30H Topsensing Fiber Selection Guide R1 W3xH12xD8 FT-Z30EW FT-Z8H 260 10.236 Tough Fiber Vacuumresistant FT-Z30E Sidesensing W3xH8xD12 - Topsensing 7RXJK FT-Z8E R1 W8.5xH12xD3 FT-Z30W FT-Z8 110 D-shaped surface that makes it easy to align with the optical axis 4.331 has been added - 15 15 FT-Z30 Topsensing FT-WZ8H 240 D-shaped surface that makes it easy to align with the optical axis 9.449 has been added R1 W3.5xH14xD11 7RXJK W3xH8xD12 End bracket shape of o3 3100 Changed to o2.5 Bending radius of 1 mm 122.047 Changed to 10 mm Fiberbendingtype W3.5xH14xD11 FT-WZ8E 15 15 1 2 1 FT-Z20HBW Fiberbendingtype FT-WZ8 R2 800 End bracket shape of o2.5/8 mm Changed to 10 mm (o2 part/2 31.496 mm + o3 part/8 mm) Fiberbendingtype Fiberbendingtype FT-WZ7HB 1 2 1 Sleevepart cannotbebent. FT-WZ4HB R10 8 FT-V25 87 R2 3500 137.795 FX-100 series R2 3500 137.795 INDEX W3xH8xD12 Earlier models comparison table 88 Ramco Innovations (800) 280-6933 www.SunxSensors.com Ramco Innovations (800) 280-6933 www.SunxSensors.com 79 80 Ramco Innovations Advantages of switching to recommended replacements Tough Fiber Choose by model { ' | | | * | | ' # Choose by shape/ application Subjected models Viewing new models Discontinued models Stopping taking order date : 31 Mar., 2012 Type Discontinued models Model No. Bending radius (mm) Shape of fiber head (mm) Fibers Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) Model No. Shape of fiber head (mm) Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 7RXJK Super Quality R25 FD-A15 Threaded Type - 200 7.874 FD-A16 Sleeve - 280 11.024 FD-AL11 R25 FD-AFM2E - 280 11.024 FD-AL11 M6 Wide Beam R25 FD-B8 - 490 19.291 FD-62 FD-E12 Chemicalresistant R10 15 3 - 12 0.472 R25 - 15 5 Sleevepartcannotbebent. Liquid Leak / Liquid Detection Highprecision*Coaxial LensmountableFX-MR3FX-MR6 Reflectivetype Vacuumresistant M3 55 2.165 R4 - 12 0.472 Split amplifier insertion section configuration Changed to integrated light emitting/receiving configuration R4 - 55 2.165 Split amplifier insertion section configuration Changed to integrated light emitting/receiving configuration M3 15 5 - Split amplifier insertion section configuration Changed to 48 integrated light emitting / receiving 1.890 configuration End bracket total length 17 mm Changed to 16 mm - Split amplifier insertion section configuration Changed to integrated 20 light emitting/receiving configuration End bracket total length 17 mm 0.787 Changed to 16 mm Protective tube outside diameter o1.6 Changed to o1.2 R4 - Split amplifier insertion section configuration Changed to integrated 20 light emitting/receiving configuration End bracket total length 17 mm 0.787 Changed to 16 mm Protective tube outside diameter o1.6 Changed to o1.2 R4 - 50 1.969 Split amplifier insertion section configuration Changed to integrated light emitting /receiving configuration Sleeve size o0.5 Changed to o0.8 R4 - 50 1.969 Split amplifier insertion section configuration Changed to integrated light emitting/receiving configuration Sleevepartcannotbebent. Coaxial,Lensmountable R25 Highprecision*Coaxial LensmountableFX-MR3FX-MR6 Lightemittingfiberelement0.175 15 3 FD-E23 - 40 1.575 M3 R4 FD-EG30 16 17 FD-EG2 End bracket total length for the M6 part only: 15 mm Changed to 17 mm (M6 part/15 mm + o4.5 area/2 mm ) Coaxial,Lensmountable R10 - 24 0.945 M3 R4 FD-EG31 16 17 Thru-beam Type Highprecision*Coaxial LensmountableFX-MR3FX-MR6 Lightemittingfiberelement0.125 Type Type FD-EG3 Coaxial,Lensmountable R10 M3 - 20 0.787 M3 FD-EG31 16 17 Others M3 FD-EN500S1 FX-500 series Sleeve15mm 0.5 15 15 R25 - - Coaxial M3 15 15 - 50 1.969 Sleeve15mm FD-EG30S FD-F705 INDEX R4 (Protective Liquidleak tube detection R20) R10 W6.5xH28.3xD17 0.8 15 7RXJK Liquid - detection SEMIS2compliant W20xH30xD10 FD-F71 7RXJK Mountableonpipe*Arrayfiber FD-FA90 M3 Sleevepartcannotbebent. Sleevepartcannotbebent. W20xH30xD10 0.8 15 R25 SEMIS2compliant M3 Sleevepartcannotbebent. 0.8 FD-ENM1S1 FX-100 series Earlier models comparison table FD-EG30S Sleevepartcannotbebent. Amplifiers Cable lead out orientation changed 320 Metal casing material (brass) 12.598 Changed to plastic (PPS) 3 0.65 30.65 FD-E22 Fiber Dimensions 520 20.472 320 Cable lead out orientation changed Metal case material (brass) 12.598 Changed to plastic (PPS) Sleevepartcannotbebent. Coaxia FD-EG1 1.5 0.48 FD-E13 Sleevepartcannotbebent. Heatresistant R4 17 1.50.5 Retroreflective Type M6 15 Convergent Reflective Type R2 W5xH20xD20 W5xH20xD20 Narrow Beam 7RXJK Sidesensing Small Spot R2 W5xH20xD20 W5xH20xD20 Flat Type 7RXJK R25 FD-AFM2 200 7.874 R4 W7xH15xD30 W7xH15xD30 Topsensing Cylindrical Type Fiber Options www.SunxSensors.com Earlier Models Comparison Table New product introduction Fiber Selection Guide (800) 280-6933 R4 (Protective Liquidleak tube detection R20) Arrayfiber R4 FD-FA93 W6.5xH28.3xD17 Liquid detection Ramco Innovations (800) 280-6933 www.SunxSensors.com Earlier Models Comparison Table Type Discontinued models Model No. Bending radius (mm) Shape of fiber head (mm) New product introduction Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) Model No. Shape of fiber head (mm) Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 7RXJK M6 FD-61 Coaxial M6 R25 FD-FM2 - 420 16.535 20 R4 Coaxial M6 R4 FD-61G 17 Sleeve90mm FD-FM2S M6 2.5 20 7RXJK R25 Sleeve - R10 380 14.961 FD-61S R25 Sleeve - R10 380 14.961 FD-61S M6 2.5 20 FD-G4 R25 M4 - 140 5.512 M6 2.5 FD-42G 420 16.535 End bracket total length of 20 mm for the (M6 part/15 mm + o3.5 area/5 mm) Changed to 17 mm (M6 part/15 mm + o4.5 area/2 mm) R4 420 The sleeve length 90 mm type Sleeve 16.535 supports semi-custom products. R10 Sleeve40mm M6 2.5 20 7RXJK Minuteobjectscanbedetected duetothesmallspotbeam. Coaxial*Lensmountable FX-MR1/MR2/MR3/MR5/MR6 End bracket total length of 20 mm for the (M6 part/15 mm + o3.5 area/5 mm) 450 Changed to 17 mm (M6 part/15 mm 17.717 + o4.5 area/2 mm) Coaxial cable used for wiring Changed to parallel type Sleeve40mm 20 7RXJK Sleeve40mm FD-FM2S4 17 7RXJK R4 420 Sleeve 16.535 R10 M4 FD-G6 M3 R2 25 7RXJK R25 - 140 5.512 200 7.874 FD-G6X M3 R25 - 170 6.693 Coaxial*Lensmountable M3 R2 FD-32G 200 7.874 - Stainless steel mesh jacket 200 covering the stainless steel spiral tube used as a protective cover for 7.874 the fiber Changed to plastic (polyolefin) 17 Coaxial*Lensmountable Stainless-jacketed M3 FD-32GX 18 W6xH18xD14 FD-L4 15.5 0.610 R25 - R10 1.5to16 - 0.059to 0.630 R2 18 7RXJK FD-L20H Reflectivetype FD-L41 W24xH21xD4 R4 FD-L43 - 0to24 0to0.945 FD-L21 R10 FD-L44 - R10 FD-L44S - 0to5 0to0.197 23 0.906 - 0to40 0to1.575 R25 FD-L45A W23.5xH29xD4.5 Glasssubstratedetection* Mapping R25 FD-L46 1to56 - 0.039to 2.205 W25xH7.3xD30 Glasssubstratedetection* Seatingconfirmation R4 FD-L47 - - 17 Sleeve90mm M4 FD-NFM2S 12 1.48 R25 Sleeve - R10 120 4.724 Vacuumresistant Liquid Leak / Liquid Detection Thru-beam Type FD-L31A Type Type 0to43 0to1.693 R4 R4 Previous no flexing distance 4to33 specifications Specification wording changed to state flexing 2 degrees 0.157to (Reference: Discontinued model 2 1.299 degrees specification is 10 mm to 32 mm) Alignment W23.5xH29xD4.5 Others Amplifiers FX-500 series FX-100 series Mapping R4 FD-L32H 0to56 0to2.205 0to29 0to1.142 W25xH7.3xD30 INDEX Seatingconfirmation R2 FD-L23 7RXJK M4 R2 FD-41 14 7RXJK 120 4.724 Heatresistant 0to5 0to0.197 W18xH29xD3.8 R25 FD-NFM2 Chemicalresistant Fiber Dimensions W20xH29xD3.8 W18xH29xD3.8 M4 Retroreflective Type 0to9.5 0to0.374 Alignment FD-L30A 7RXJK 0to29 0to1.142 Convergent Reflective Type 7RXJK 4to44 - 0.157to 1.732 Wide Beam R4 R4 W20xH29xD3.8 Glasssubstratedetection* Alignment Narrow Beam Fiber Options W12xH19xD3 R4 FD-L45 Flat Type 0to24 0to0.945 Seatingconfirmation FD-L10 7RXJK Cylindrical Type W12xH19xD3 W12xH19xD3 Glasssubstratedetection* Alignment Threaded Type R2 Seatingconfirmation FD-L11 7RXJK Super Quality R2 W17xH29xD3.8 W12xH19xD3 Glasssubstratedetection* Seatingconfirmation Fibers Alignment FD-L22A 7RXJK 0to9.5 0to0.374 Viewing new models 1.5to16 0.059to 0.630 W24xH21xD4 W17xH29xD3.8 Glasssubstratedetection* Seatingconfirmation Choose by shape/ application 7RXJK 7RXJK Glasssubstratedetection* Alignment Choose by model R2 W6xH18xD14 Glasssubstratedetection Fiber Selection Guide Small Spot 17 Metal-jacketed LensmountableFX-MR3FX-MR6 Coaxial Tough Fiber Sleeve Coaxial*Lensmountable 25 LensmountableFX-MR3FX-MR6 Coaxial 81 End bracket total length of 17 mm for 125 the (M4 part/12 mm + o2.5 area/5 mm) 4.921 Changed to 14 mm (M4 part/12 mm + o2.5 area/2 mm) Sleeve40mm M4 FD-41S 12 1.48 R2 Sleeve R10 125 The sleeve length 90 mm type 4.921 supports semi-custom products. Earlier models comparison table 82 Ramco Innovations www.SunxSensors.com Earlier Models Comparison Table New product introduction Discontinued models Type Tough Fiber (800) 280-6933 Model No. Fiber Selection Guide Shape of fiber head (mm) Sleeve40mm Choose by model FD-NFM2S4 Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) R25 Sleeve - R10 M4 12 Choose by shape/ application Bending radius (mm) 1.48 Model No. 7RXJK 120 4.724 Shape of fiber head (mm) Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) Sleeve40mm M4 FD-41S 12 R2 Sleeve R10 1.48 7RXJK Viewing new models 1.5 R4 FD-P2 15 80 3.150 Fibers FD-S21 1.5 Split amplifier insertion section configuration Changed to integrated 80 light emitting/receiving configuration End bracket total length 15 mm 3.150 Changed to 10 mm PVC outer covering material for fiber Changed to PE R2 End bracket shape is 12 mm for the M3 part only Changed to a total length 125 of 12 mm (M3 part/10 mm + o2 area/2 4.921 mm ) PVC outer covering material for fiber Changed to PE R4 R2 10 7RXJK Super Quality M3 R4 FD-P40 Threaded Type 12 Cylindrical Type FD-31 120 4.724 FD-S32 12 7RXJK 3 R4 FD-P50 Sleeve 45 1.772 M3 15 Flat Type 3 15 15 R4 FD-P60 Narrow Beam M4 120 4.724 Wide Beam M4 End bracket total length of 15 mm for 450 the M6 part only Changed to 17 mm (M6 part/15 mm + o4.5 area/2 mm) 17.717 PVC outer covering material for fiber Changed to PE R4 - End bracket total length of 19 mm for the (M6 part/15 mm + crimped area/4 mm) Changed to 22 mm (o4.5 area/2 mm + M6 part/15 mm + crimped area/5 mm) 280 Split amplifier insertion section 11.024 configuration Changed to integrated light emitting/receiving configuration Stainless steel mesh jacket covering the stainless steel spiral tube used as a protective cover for the fiber Changed to plastic (polyolefin) R4 290 11.417 R4 420 16.535 R2 FD-41 FD-P80 Retroreflective Type M6 R4 280 11.024 14 M6 R4 FD-61 17 15 Chemicalresistant Heatresistant Vacuumresistant Reflectivetype FD-P81X Stainless-jacketed Metal-jacketed M6 R10 FD-64X 220 8.661 FD-R60 7RXJK 15 R25 - M6 Thru-beam Type R25 FD-S80 - 15 M6 FD-S32 15 0.8 R25 - 120 4.724 15 FD-V50 2.3 2 R4 R2 125 4.921 End bracket shape is 8 mm for the o2.5 part only Changed to 10 mm (o3 part/ 8 mm + o2 area/2 mm) R2 125 4.921 End bracket shape is 12 mm for the M3 part only Changed to a total length of 12 mm (M3 part /10 mm + o2 area/2 mm) End bracket shape is 12 mm for the M4 part only Changed to a total length 450 of 17 mm (M6 part/15 mm + o4.5 17.717 area/2 mm) Fiber cable outside diameter o1.3 Changed to o2.2 R2 End bracket total length is 12 mm for 125 the M4 part only Changed to 14 mm (M4 part/12 mm + o2.5 area/2 mm) 4.921 Fiber cable outside diameter o1.3 Changed to o1 R2 From sleeve end to optical axis 65 center position is 0.7 mm Changed to 2 mm 2.559 End sleeve length of 10 mm Changed to 15 mm 7RXJK 2.5 R25 FD-SNFM2 - 8 120 4.724 FD-S31 120 4.724 FD-31 M3 10 7RXJK M3 R25 FD-T40 FX-100 series 5 From sleeve end to optical axis center position is 0.8 mm 120 Changed to 2.3 mm 4.724 A D-shaped surface that makes it easy to align with the optical axis has been added 20 Sleevepartcannotbebent. Sleevepartcannotbebent. Amplifiers 3 7RXJK 52 Others FX-500 series 380 14.961 15 20 FD-SFM2SV2 15 7RXJK 3 Type Type 22 15 FD-R80 Fiber Dimensions M6 270 - 10.630 - 12 M3 12 7RXJK M6 R4 FD-61 INDEX 17 M4 R25 FD-T80 - 12 380 14.961 7RXJK M4 Earlier models comparison table FD-41 14 1510 FD-V41 3 1.5 End bracket total length of 15 mm for the (M4 part/12 mm + o3 area/3 mm) Changed to 14 mm (M4 part/12 mm + o2.5 area/2 mm) PVC outer covering material for fiber Changed to PE 125 4.921 7RXJK Convergent Reflective Type Fiber Options 420 PVC outer covering material for 16.535 fiber Changed to PE 7RXJK Small Spot Liquid Leak / Liquid Detection 125 4.921 7RXJK Smalldiameter 0.7 Sleevepartcannotbebent. R25 - 65 2.559 FD-V30 Smalldiameter 15 15 3 1.5 2 Sleevepartcannotbebent. Ramco Innovations (800) 280-6933 www.SunxSensors.com Earlier Models Comparison Table Type Discontinued models Model No. Bending radius (mm) Shape of fiber head (mm) Model No. 7RXJK R1 Sleeve - R10 M4 12 Shape of fiber head (mm) M4 1.48 7RXJK R1 Sleeve - R10 1.48 M6 FD-61 R1 - 15 R1 270 - 10.630 R2 200 7.874 17 7RXJK FD-WG4 M4 FD-42G R2 - Viewing new models End bracket total length is 15 mm for the M6 part only Changed to 17 mm (M6 part/ 15 mm + o4.5 area/2 mm) End bracket total length is 15 mm for the M6 part only Changed to 17 mm (M6 part/ 15 mm + o4.5 area/2 mm) Sleeve M4 150 5.906 R1 - R1 10to650 Stainless steel unit casing material - 0.394to Changed to plastic (PC) 25.591 R2 1.5to16 0.059to 0.630 R1 3to14 0.118to 0.551 Small Spot 25 R1 FD-WKZ1 W5.2xH9.5xD15 20to490 - 0.787to 19.291 W5.2xH9.5xD15 FD-Z50HW 7RXJK FD-L21 Glasssubstratedetection R1 FD-WL41 W24xH21xD4 2.5to14 - 0.098to 0.551 W24xH21xD4 FD-L21W - Reflectivetype W24xH21xD4 R1 FD-WL48 - W7.2xH7.5xD2 7.5 0.295 FD-L12W R1 FD-WS8 - 15 250 9.843 3 Coaxial 3 R2 - 150 5.906 420 16.535 R1 - 270 10.630 R1 - 150 5.906 R2 125 4.921 End bracket total length is 12 mm for the M3 part only Changed to 12 mm (M3 part/ 10 mm + o2 area /2 mm) Type - 80 3.150 End bracket total length is 12 mm for the M3 part only Changed to 12 mm (M3 part/ 10 mm + o2 area/ 2 mm) Others R1 125 4.921 End bracket total length is 12 mm for the M4 part only Changed to 14 mm (M4 part/12 mm + o3 area/ 2 mm) Amplifiers R2 R1 270 - 10.630 End bracket total length is 12 mm for the M4 part only Changed to 14 mm (M4 part/12 mm + o3 area/ 2 mm) 7RXJK M3 R1 FD-WT4 - 12 M3 12 80 3.150 FD-31W M3 12 7RXJK M4 FD-41 M4 R1 FD-WT8 - 14 14 250 9.843 M4 FD-41W 14 7RXJK FD-V30 3 2 2 R2 Sleevepartcannotbebent. 1515 FD-WV42 Smalldiameter 15 15 3 1.5 1 R1 - 16 0.630 Sleevepartcannotbebent. FD-V30W 15 3 15 1.5 2 Sleevepartcannotbebent. Heatresistant 15 FD-31 Chemicalresistant R4 Coaxial 3 15 Retroreflective Type 8 0.315 3 FD-S33GW Convergent Reflective Type - 15 FD-WSG4 Wide Beam R1 15 FD-S32W Narrow Beam Vacuumresistant W7.2xH7.5xD2 7RXJK FD-S32 3 Threaded Type Flat Type Coaxial*Lensmountable FD-42GW Longsensingrange* Rectangularhead Super Quality Cylindrical Type Coaxial*Lensmountable M4 Fibers 25 150 5.906 25 450 17.717 M6 FD-61W Minuteobjectscanbedetected duetothesmallspotbeam. Coaxial*Lensmountable FX-MR1/MR2/MR3/MR5/MR6 Fiber Selection Guide Choose by model 80 3.150 R4 17 250 9.843 Tough Fiber Choose by shape/ application M4 12 M6 125 4.921 Sleeve40mm FD-41SW FD-W8 Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) R2 Sleeve R10 1.48 12 80 3.150 Bending radius (mm) Sleeve40mm FD-41S Sleeve40mm FD-W44 New product introduction Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) 83 R1 - Liquid Leak / Liquid Detection Fiber Options Fiber Dimensions Thru-beam Type From sleeve end to optical axis center position is 1 mm Changed to 2 mm 65 End sleeve thickness of o2 Changed to o1.5 2.559 A D-shaped surface that makes it easy to align with the optical axis has been added From sleeve end to optical axis center position is 1 mm Changed to 2 mm 20 End sleeve thickness of o2 Changed to o1.5 0.787 A D-shaped surface that makes it easy to align with the optical axis has been added Type FX-500 series FX-100 series INDEX Earlier models comparison table 84 Ramco Innovations Type Discontinued models Model No. Fiber Selection Guide Choose by shape/ application Viewing new models Shape of fiber head (mm) FD-WZ4HB Bend- Sensing ing range dura- FX-500 bility STD (mm in) R1 2.5to65 - 0.098to 2.559 W2xH10xD10 Fiberbendingtype R1 FD-WZ7HB Recommended replacements Bending radius (mm) Fiberbendingtype Reflectivetype Choose by model W3.5xH14xD11 1to150 - 0.039to 5.906 Fibers FR-KV1 Flat Type Retroreflective type Sleeve - R10 20to200 - 0.787to 7.874 FR-KZ21 R10 20to200 - 0.787to 7.874 R1 100to990 - 3.937to 38.976 W10.6xH28xD10.1 W9.5xH25xD5.2 FR-KZ21E W10.6xH28xD10.1 FR-WKZ11 W30xH30xD0.5 Wide Beam Retroreflective Type Sensing width 32 mm R10 - W5xH69xD20 Chemicalresistant Wide area sensing Sensing width 11 mm Heatresistant FT-A8 W4.2xH31xD13.5 Topsensing 3600 141.732 R10 3600 - 141.732 R25 - W5xH15xD15 FT-AFM2 860 33.858 Sidesensing W5xH15xD15 Fiber Options FT-B8 Others R1 2to85 - 0.079to 3.346 R1 - 260 10.236 R2 15to310 Unit side installation screw 0.591to positions have been moved back 1 12.205 mm from the front edge R2 20to300 0.787to 11.811 R2 20to300 0.787to 11.811 R1 100to990 3.937to 38.976 R2 Fiber cable outside diameter o2.2 3600 Changed to o1.3 141.732 Optical cable diameter of 3 x 32 Changed to 3.2 x 32 R2 3600 Fiber cable outside diameter o2.2 141.732 Changed to o1.3 R2 860 Cable lead out orientation changed Metal casing material (brass) 33.858 Changed to plastic (PPS) R2 860 Cable lead out direction changed Metal casing material (brass) 33.858 Changed to plastic (PPS) R4 W2xH10xD10 FD-Z40HBW W3.5xH14xD11 W7.5xH2.2xD11.2 FR-KZ22E 7RXJK W9.5xH5.2xD21 FR-KZ50H W10.6xH28xD10.1 7RXJK W9.5xH25xD5.2 FR-KZ50E W28xH10.6xD10.1 W5.2xH9.5xD16 FR-Z50HW W30xH30xD0.5 FT-A32 - 860 33.858 Sensing width 32 mm W5xH69xD20 FT-A11 7RXJK FT-AL05 Sensing width 11 mm W4.2xH31xD13.5 Sensing width 5.5 mm W5xH15xD15 7RXJK FT-AL05 Sensing width 5.5 mm W5xH15xD15 Lensmountable Lensmountable FX-LE1/LE2/SV1 M4 R25 - 1250 49.213 M4 FT-43 15 Beamdia.0.125mm 0.253 FT-E12 Sleevepartcannotbebent. Set length type Changed to free cut type 75 Fiber cable outside diameter o1.2 Changed to o1 2.953 End bracket length of 10 mm Changed to 15 mm 0.253 R5 - - R2 FT-E13 Beamdia.0.25mm 5 15 7RXJK 0.43 5 10 Amplifiers FT-F902 FX-100 series Mountableonpipe SEMIS2compliant W23xH20xD17 R5 - - R2 FT-E23 5 15 Sleevepartcannotbebent. R4 Liquid (Protective tube detection R20) 7RXJK M14 R25 19600 - 771.654 SEMIS2compliant W23xH20xD17 FT-F93 7RXJK Withlens FT-FM10L Beamdia.0.25mm 0.43 Sleevepartcannotbebent. M14 FT-140 M4 FT-FM2 R25 - 1100 43.307 Sleeve90mm M4 FT-FM2S 1.48 12 Sleeve40mm M4 FT-FM2S4 1.48 12 19600 771.654 R4 1130 44.488 Lensmountable M4 FT-42 15 15 Earlier models comparison table R4 40 7RXJK Lensmountable FX-LE1/LE2/SV1 R2 Liquid (Protective tube detection R20) Withlongrangelens 23 INDEX 7RXJK R25 1100 Sleeve - 43.307 R10 FT-42S R25 1100 Sleeve - 43.307 R10 FT-42S Sleeve40 R4 1130 The sleeve length 90 mm type Sleeve 44.488 supports semi-custom products. R10 12 M4 1.48 7RXJK 1400 55.118 Fiber length 500 mm /set length type Changed to fiber length 1 m/free cut type 15 Fiber cable outside diameter o1.2 0.591 Changed to o1 End bracket length of 10 mm Changed to 15 mm Beamdia.0.125mm Sleevepartcannotbebent. FT-E22 FX-500 series Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) Fiberbendingtype 7RXJK Thru-beam type Type FD-Z20HBW 15 Thru-beam Type Type R25 FT-AFM2E Fiber Dimensions Fiberbendingtype 7RXJK Vacuumresistant Liquid Leak / Liquid Detection Bending radius (mm) 7RXJK Wide area sensing FT-A30 Shape of fiber head (mm) W4xH2xD21.5 W9.5xH5.2xD15 Convergent Reflective Type Model No. W4xH2xD21.5 W9.5xH5.2xD21 Small Spot Narrow Beam 20to310 0.787to 12.205 R10 Super Quality Cylindrical Type 7RXJK W7.5xH2.2xD11.2 Threaded Type www.SunxSensors.com Earlier Models Comparison Table New product introduction Tough Fiber (800) 280-6933 Sleeve40 M4 1.48 R4 1130 Sleeve 44.488 12 R10 Ramco Innovations (800) 280-6933 www.SunxSensors.com Earlier Models Comparison Table Type Discontinued models Shape of fiber head (mm) Model No. 3.53.7 FT-K8 Bend- Sensing ing range dura- FX-500 bility STD (mm in) R25 3600 - 141.732 20 W2xH1.5xD20 R10 2 FT-KV1 New product introduction Recommended replacements Bending radius (mm) 540 - 21.260 Model No. Shape of fiber head (mm) 7RXJK FT-KS40 7RXJK 2 R25 - 3 3600 141.732 FT-KV40 3 M3 R25 - 15 10 Sleeve40mm M3 FT-NFM2S4 0.88 10 310 12.205 7RXJK R25 310 Sleeve - 12.205 R10 FT-31S 330 12.992 FT-S21 10 R2 12 FT-31S R4 M3 FT-31 R25 310 Sleeve - 12.205 R10 1.5 FT-P2 R2 Fiber cable outside diameter o2.2 Changed to o1 3600 Metal end material (stainless steel) 141.732 Changed to plastic (LCP), set screw fastening specifications Changed to MS-FD-3 fastener specifications 7RXJK FT-NFM2 0.88 25 25 7RXJK Sleeve40 M3 0.88 10 Sleeve40 M3 0.88 7RXJK 10 1.5 R2 Sleeve R10 315 The sleeve length 90 mm type 12.402 supports semi-custom products. R2 Sleeve R10 315 12.402 R4 FT-P40 10 160 6.299 Fiber length 1 m/Set length type 315 Changed to fiber length 2 m/free cut type 12.402 Fiber exterior cover material of PVC Changed to PE R2 End bracket total length of 10 mm for 315 the M3 part Changed to 12 mm (M3 part/10 mm + o2 area/2 mm) 12.402 Fiber exterior cover material of PVC Changed to PE R4 Fiber exterior cover material of 1130 PVC Changed to PE 44.488 Fiber cable outside diameter o1.25 Changed to o2.2 M4 R4 Thru-beam type FT-P60 350 13.780 Lensmountable M4 FT-42 15 15 7RXJK LensmountableFX-LE1/LE2/SV1 M4 FT-P80 R4 810 31.890 Lensmountable M4 R4 FT-42 M4 FT-P81X R10 - 1 R4 6 880 34.646 90 3.543 - Stainless steel mesh jacket covering 1200 the stainless steel spiral tube used as 47.244 a protective cover for the fiber Changed to plastic (polyolefin) M4 R4 FT-45X 20 7RXJK FT-S11 14 R25 - 1 780 30.709 FT-R40 R25 - 1100 43.307 FT-S32 8 2.5 - 2600 102.362 FT-S32 8 570 22.441 FT-V30 1.52.5 FT-SFM2SV2 0.8 Sleevepart cannotbebent. R25 - 1.5 R25 FT-SNFM2 - 8 310 12.205 R10 3100 122.047 From sleeve end to optical axis center 680 position is 0.8 Changed to 1.3 mm 26.772 D-shaped surface that makes it easy to align with the optical axis has been added FX-100 series R4 R2 315 End bracket total length of o1.5 /8 mm Changed to 12 mm (o1 12.402 area/2 mm + o1.5/8 mm) INDEX R4 End bracket total length of 12.5 mm for the (M2.6 part/2.5 mm + M3 part/10 1130 mm) Changed to 15 mm (M2.6 part 44.488 /3 mm + M4 part/12 mm) Fiber cable outside diameter o1.3 Changed to o2.2 R4 10 7RXJK Lensmountable FX-LE1/SV1 M3 FT-T80 R25 - Lensmountable M4 1100 43.307 FT-42 3500 137.795 FT-V40 15 12.5 4 FT-V10 R25 3 25 - 7RXJK 4 3 25 Fiber Options End bracket total length of 14 mm for the (M2.6 part/3 mm + M4 part/11 mm) Changed to 15 mm (M2.6 part/3 mm + M4 part/12 mm) Type Type Others 20 15 1.5 Liquid Leak / Liquid Detection 3100 Optical cable diameter of o1 122.047 Changed to o2.2 1.52.5 FT-S21 Vacuumresistant 8 7RXJK Heatresistant R10 2.5 Sleevepart cannotbebent. Chemicalresistant 930 36.614 8 20 15 Retroreflective Type 2.5 1.3 Convergent Reflective Type R4 15 7RXJK Wide Beam Thru-beam Type Longsensingrange*withlens R25 Sleeve Flat Type M4 Longsensingrange*withlens FT-SFM2L Cylindrical Type Fiber Dimensions Longsensingrange*withlens 2.5 FT-SFM2 Threaded Type R2 Lensmountable M4 Super Quality 90 3.543 6 7RXJK LensmountableFX-LE1/LE2 FT-R80 1130 Fiber exterior cover material of 44.488 PVC Changed to PE Lensmountable*Stainless-jacketed 20 FT-PS1 15 15 LensmountableFX-LE1/LE2/SV1 Metal-jacketed Fibers Narrow Beam 12 7RXJK LensmountableFX-LE1/LE2/SV1 M3 FT-31 Choose by model Small Spot R2 10 Fiber Selection Guide Viewing new models End bracket total length of 15 mm for 315 the (M3 part/10 mm + o2 area/5 mm 12.402 Changed to 12 mm (M3 part/10 mm + o2 area/2 mm) 7RXJK M3 710 27.953 R2 20 Tough Fiber Choose by shape/ application 1.5x2 4 FT-KV8 M3 R2 3600 Fiber cable outside diameter o2.2 141.732 Changed to o1 7RXJK Side-viewtypewithsmalllight dispersion 4 FT-NFM2S Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 3.5 3.7 20 Sleeve90mm Bending radius (mm) 20 FT-KV26 85 3500 137.795 Amplifiers FX-500 series Earlier models comparison table 86 Ramco Innovations www.SunxSensors.com Earlier Models Comparison Table New product introduction Discontinued models Type Tough Fiber (800) 280-6933 Model No. Shape of fiber head (mm) Bending radius (mm) Fiber Selection Guide Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) Model No. Shape of fiber head (mm) Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) 7RXJK Choose by model 1 2 FT-V22 Choose by shape/ application R2 End bracket outside diameter of 240 o2.5 Changed to o2 From sleeve end to optical axis 9.449 center position is 0.6 Changed to 1 mm R2 End bracket total length of 15 mm for the (M3 part/10 mm + crimped 315 area/5 mm) Changed to 12 mm 12.402 (o2 area/2 mm + M3 part/10 mm) Fiber cable outside diameter o2.2 Changed to o1 R1 260 - 10.236 R4 1130 44.488 R1 - 800 31.496 R2 Fiber cable outside diameter o2.2 3600 Changed to o1.3 141.732 Optical cable diameter of 3 x 32 Changed to 3.2 x 32 R1 - Fiber cable outside diameter o2.2 3600 Changed to o1.3 141.732 Optical cable diameter of 3 x 32 Changed to 3.2 x 32 R2 3600 Fiber cable outside diameter o2.2 141.732 Changed to o1.3 R1 - 3600 Fiber cable outside diameter o2.2 141.732 Changed to o1.3 R2 Fiber cable outside diameter o2.2 Changed to o1 3600 Metal end material (stainless steel) Changed to plastic (LCP), set screw 141.732 fastening specifications Changed to MS-FD-3 fastener specifications R1 Fiber cable outside diameter o2.2 Changed to o1 3600 Metal end material (stainless steel) - Changed to plastic (LCP), set screw 141.732 fastening specifications Changed to MS-FD-3 fastener specifications R1 - 800 31.496 R1 - 2200 86.614 R1 - 800 End bracket total length of 15 mm 31.496 Changed to 10 mm 1 2 0.6 Sleevepart cannotbebent. Fiber length 1 m/Set length type Changed to fiber length 2 m/free cut type 450 From sleeve end to optical axis center 17.717 position is 0.6 Changed to 1.1 mm D-shaped surface that makes it easy to align with the optical axis has been added R25 - 300 11.811 1.1 FT-V23 R4 Sleevepart cannotbebent. 20 15 20 15 Viewing new models 7RXJK 12.5 FT-V41 0.6 Sleevepart cannotbebent. Fibers R25 - 200 7.874 1 FT-V25 Sleevepart cannotbebent. 10 15 Super Quality 1 2 15 15 7RXJK Threaded Type M3 FT-31 Cylindrical Type 12 M3 R1 FT-W4 Sleeve - 15 250 9.843 Flat Type M3 FT-31W Small Spot 12 Narrow Beam 7RXJK Wide Beam Convergent Reflective Type M4 FT-W8 R10 - M4 15 7RXJK Heatresistant Sensing width 32 mm FT-A32 Thru-beam type Fiber Options Lensmountable FT-42W Chemicalresistant Liquid Leak / Liquid Detection M4 15 790 31.102 15 Retroreflective Type Vacuumresistant Lensmountable FT-42 Lensmountable FX-LE1/LE2/SV1 W5xH69xD20 FT-WA30 Sensing width 32 mm R1 W5xH69xD20 3600 - 141.732 Sensing width 32 mm FT-A32W W5xH69xD20 7RXJK Sensing width 11 mm FT-A11 Fiber Dimensions Thru-beam Type Sensing width 11 mm R1 FT-WA8 - W4.2xH31xD13.5 W4.2xH31xD13.5 3600 141.732 Type Sensing width 11 mm FT-A11W W4.2xH31xD13.5 Type Others 7RXJK 4 FT-KV40 Amplifiers 4 R1 FT-WKV8 - 3 FX-500 series FT-KV40W R1 FT-WR80 - W7xH9xD13.9 3 25 M4 660 25.984 FT-R41W 2200 86.614 FT-R42W W7xH9xD13.9 Withlens Withlongrangelens M4 R1 FT-WR80L - W7xH9xD14.6 FT-WS3 25 4 25 M4 Earlier models comparison table 3 3600 141.732 FX-100 series INDEX End bracket total length of 15 mm for the (M3 part/10 mm + crimped area/5 mm) Changed to 12 mm (o2 area/2 mm + M3 part/10 mm) Fiber cable outside diameter o2.2 Changed to o1 3 15 M4 W7xH9xD14.4 R1 - 790 31.102 FT-S31W 3 10 Ramco Innovations (800) 280-6933 www.SunxSensors.com Earlier Models Comparison Table Type Discontinued models Model No. Shape of fiber head (mm) Bending radius (mm) New product introduction Recommended replacements Bend- Sensing ing range dura- FX-500 bility STD (mm in) Model No. Shape of fiber head (mm) 7RXJK 1.5 FT-S21 1.5 FT-WS4 R1 - 8 Bending radius (mm) Bend- Sensing Main points of difference from ing range discontinued models dura- FX-500 bility STD (mm in) R2 315 End bracket shape of o1.5/8 mm Changed to 10 mm (o1 part/2 12.402 mm + o1.5 part/8 mm) R1 260 End bracket shape of o1.5/8 mm - Changed to 10 mm (o1 part/2 10.236 mm + o1.5 part/8 mm) R1 - 10 250 9.843 1.5 FT-S21W 10 2.5 R1 FT-WS8 - 8 790 31.102 10 Longsensingrange*withlens 3 R1 FT-WS8L 3 FT-S31W Longsensingrange*withlens - 8 3300 129.921 2.5 FT-S32 7RXJK 1 2 FT-WV42 1 R1 - 15 15 Sleevepartcannotbebent. Sleevepart cannotbebent. 100 3.937 FT-V24W W2xH10xD10 R1 - 210 8.268 - 790 31.102 R1 Thru-beam type W8.5xH12xD3 R1 W2xH10xD10 FT-Z40HBW Topsensing - 1300 51.181 W3xH12xD8 R1 - 800 31.496 R2 2100 Black casing color Changed to translucent, protective seal 82.677 eliminated W8.5xH12xD3 Sidesensing R1 3400 - 133.858 Sidesensing 7RXJK R1 - 3300 129.921 Topsensing Topsensing 7RXJK W8.5xH12xD3 R4 1200 47.244 W3xH12xD8 2000 78.740 R4 R4 2100 82.677 Topsensing FT-Z30H Fibers Super Quality Threaded Type Cylindrical Type Sleeve Flat Type Small Spot Narrow Beam Wide Beam Convergent Reflective Type Retroreflective Type Chemicalresistant Heatresistant Sidesensing Topsensing Liquid Leak / Liquid Detection R2 3500 137.795 Fiber Options R1 - 3400 133.858 R2 3500 137.795 Fiber Dimensions Thru-beam Type Type Type R1 - 3500 137.795 Others R2 2100 Black casing color Changed to translucent, protective seal 82.677 eliminated Amplifiers W8.5xH12xD3 FX-500 series W3xH12xD8 FT-Z30E 7RXJK Topsensing Viewing new models 1500 Black casing color Changed to translucent, protective seal 59.055 eliminated W3xH8xD12 FT-Z30 7RXJK Sidesensing Choose by shape/ application - W3xH8xD12 FT-Z30HW Topsensing Choose by model W3xH12xD8 FT-Z30H Topsensing Fiber Selection Guide R1 W3xH12xD8 FT-Z30EW FT-Z8H 260 10.236 Tough Fiber Vacuumresistant FT-Z30E Sidesensing W3xH8xD12 - Topsensing 7RXJK FT-Z8E R1 W8.5xH12xD3 FT-Z30W FT-Z8 110 D-shaped surface that makes it easy to align with the optical axis 4.331 has been added - 15 15 FT-Z30 Topsensing FT-WZ8H 240 D-shaped surface that makes it easy to align with the optical axis 9.449 has been added R1 W3.5xH14xD11 7RXJK W3xH8xD12 End bracket shape of o3 3100 Changed to o2.5 Bending radius of 1 mm 122.047 Changed to 10 mm Fiberbendingtype W3.5xH14xD11 FT-WZ8E 15 15 1 2 1 FT-Z20HBW Fiberbendingtype FT-WZ8 R2 800 End bracket shape of o2.5/8 mm Changed to 10 mm (o2 part/2 31.496 mm + o3 part/8 mm) Fiberbendingtype Fiberbendingtype FT-WZ7HB 1 2 1 Sleevepart cannotbebent. FT-WZ4HB R10 8 FT-V25 87 R2 3500 137.795 FX-100 series R2 3500 137.795 INDEX W3xH8xD12 Earlier models comparison table 88 formerly