Now you can afford thermal
imaging! The quality that only
Fluke can deliver at breakthrough
affordability. TiS—the best
thermal imager for the money.
Fluke proudly introduces an entry level thermal imager for quick,
easy, and accurate problem identification and troubleshooting
designed specifically for the building inspection professional.
Whether you are a building inspector, home inspector, electri-
cian, energy auditor, HVAC, insulator, or windows installer the
Fluke Thermal Imaging Scanner is the perfect tool to help you
identify hidden building construction issues, find moisture intru-
sion, detect energy loss/missing insulation, and many basic
electrical connection and load problems.
Now Fluke quality, durability, and performance are available
in a thermal imager engineered for the value-conscious building
professional.
The Fluke TiS Thermal Imaging Scanner is the top-performing
imager in its price class and the most affordable thermal camera
to meet the proposed RESNET infrared inspection standards.
Key features:
• The most affordable thermal imager on the market that meets
the proposed RESNET infrared inspection standard
• Highest resolution (120x120) in price class
• Only imager in price class with versatile, one-handed,
manual focus
• Largest display size 9.3 cm (3.7 in) in price class. 30 % larger
than comparable imagers!
• Long battery life lasts ~4 hours
• Rugged body engineered to withstand 2 m (6.5 ft) drop test
• Award winning ergonomic design
• Easy to use—the TiS Thermal Imaging Scanner provides you
with a basic, reliable solution for the building professional
• Trusted quality of Fluke brand
Technical Data
Energy audit,
building inspection,
weatherization
Restoration,
water damage,
roofing
Fluke TiS
Building
Diagnostic
Thermal Imaging
Scanner
Building problems,
defects and general
maintenance
United States and Canada
2 Fluke Corporation Fluke TiS Building Diagnostic Thermal Imaging Scanner - United States and Canada
Detailed specifications
TiS
Temperature
Temperature measurement range
(not calibrated below -10 °C) -20 °C to +100 °C (-4 °F to +212 °F)
Temperature measurement accuracy ± 5 °C or 5 % (at 25 °C nominal, whichever is greater)
Imaging performance
Image capture frequency 9 Hz refresh rate
Detector type 120 X 120 Focal Plane Array, uncooled microbolometer
Thermal sensitivity (NETD) ≤ 0.1 °C at 30 °C target temp. (100 mK)
Infrared spectral band 7.5 µm to 14 µm (long wave)
Standard infrared lens type
Field of view: 17° x 17°
Spatial resolution: (IFOV) 2.50 mRad
Minimum focus distance: 15 cm (approx. 6 in)
Focus mechanism Versatile, one-handed manual focus
Image presentation
Palettes Ironbow, Blue-Red, Grayscale
Level and span Smooth auto-scaling and lock of level and span
Minimum span (in auto mode) 5 °C (9 °F)
Image capture, review, save mechanism One-handed image capture, review, and save capability
Storage medium SD Memory Card (2 GB memory card will store at least 1200 fully radiometric (.is2)
IR images annotations, or 3000 basic bitmap (.bmp) images, transferrable to PC via included
multi-format USB card reader
File formats Non-radiometric (.bmp) or fully-radiometric (.is2)
No analysis software required for non-radiometic bitmap (.bmp) files
Export file formats w/SmartView® software BMP, DIB, GIF, JPE, JFIF, JPEG, JPG, PNG, TIF, and TIFF
Memory review Sequential image navigation and review
General specifications
Operating temperature -10 °C to +50 °C (14 °F to 122 °F)
Storage temperature -20 °C to +50 °C (-4 °F to 122 °F) without batteries
Relative humidity 10 % to 95 % non-condensing
Display 9.3 cm (3.7 in)
Controls and adjustments User selectable temperature scale (°C/°F)
Language selection
Time/Date set
User selectable backlight: “Full Bright” or “Auto”
Software SmartView® full analysis and reporting software included
Batteries Internal rechargeable battery pack (included)
Battery life Three to four hours continuous use (assumes 50 % brightness of LCD)
Battery charge time 2.5 hours to full charge
AC battery charging AC adapter/charger (110 V ac to 220 V ac, 50/60 Hz) (included), charges battery while imager
is operating or turned off, ac mains adapters included
AC operation AC operation with included power supply (110 V ac to 220 V ac, 50/60 Hz), ac mains
adapters included
Power saving Sleep mode activated after five minutes of inactivity, automatic power off after 30 minutes of
inactivity
Safety standards CSA (US and CAN): C22.2 No. 61010-1-04, UL: UL STD 61010-1 (2nd Edition), ISA: 82.02.01
Electromagnetic compatibility Meets all applicable requirements in EN61326-1:2006
C Tick IEC/EN 61326-1
US FCC CFR 47, Part 15 Class B
Vibration 0.03 g2/Hz (3.8 grms), IEC 68-2-6
Shock 25 g, IEC 68-2-29
Drop 2 meter (6.5 feet)
Size (H x W x L) 26.7 cm x 12.7 cm x 15.2 cm (10.5 in x 5.0 in x 6.0 in)
Weight (battery included) 1.2 kg (2.6 lb)
Enclosure rating IP54 (protected against dust, limited ingress; protection against water spray from
all directions)
Warranty Two-years (standard)
Recommended calibration cycle Two-years (assumes normal operation and normal aging)
Supported Languages Czech, English, Finnish, French, German, Italian, Japanese, Korean, Polish, Portuguese,
Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, Turkish, and
(Dutch and Hungarian in manual only)
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2010 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 6/2010 3804542A D-EN-N
Modification of this document is not permitted
without written permission from Fluke Corporation.
Fluke. Not just infrared.
Infrared you can use.™
Ordering information
FLK-TiS 9Hz Thermal Imaging Scanner
Included: TiS Thermal Imaging Scanner with standard infrared lens; ac power supply/battery
charger (including mains adapters); SD memory card; multi-format USB memory card reader for
downloading images into your computer; SmartView® software with free software upgrades for
life; rugged, hard carrying case; soft transport bag; adjustable hand strap; users manual on CD;
warranty registration card; interactive training DVD.
Optional accessories
TI-CAR-CHARGER Thermal Imager Vehicle Charger
TI-VISOR Thermal Imager Visor
BOOK-ITP Introduction to Thermography Principles Book
TI-TRIPOD Tripod Mounting Base Accessory
Key benefits of Fluke thermal imagers
in building inspections:
• Expand your business offering with infrared inspections
• Differentiate your service from competition
• Find hidden problems
• Identify issues faster
• Identify areas for customers to reduce energy usage
• Document and validate your work
• Reduce liability
• Increase safety
Applications for building inspections
Residential:
• Air infiltration (energy usage/comfort)
• Missing, improperly installed or settled insulation
• Roof leak inspection
• Duct leaks
• HVAC testing
• In floor heating
• Dryer vents
• Residential electrical
• Moisture intrusion and condensation issues
Commercial:
• Roof leak inspection
• Commercial HVAC
• Moisture detection
• Steam traps
• Electrical inspections
• Electrical motors
• Pumps and hydraulics
• Commercial energy loss (building envelope inspection)
• Plumbing
