©2017 Advanced Linear Devices, Inc., Vers. 2.4 www.aldinc.com 1 of 12
e
EPAD
TM
®
N
A
B
L
E
D
E
ADVANCED
LINEAR
DEVICES, INC.
GENERAL DESCRIPTION
ALD110800A/ALD110800/ALD110900A/ALD110900 are high precision
monolithic quad/dual N-Channel MOSFETs matched at the factory using
ALD’s proven EPAD CMOS technology. These devices are members of
the EPAD® Matched Pair MOSFET Family.
Intended for low voltage small signal applications, the ALD110800/
ALD110900 features Zero-Threshold™ voltage, which reduces or elimi-
nates input to output voltage level shift, including circuits where the signal
is referenced to GND or V+. This feature greatly reduces output signal
voltage level shift and enhances signal operating range, especially for
very low operating voltage environments. With these zero threshold de-
vices, an analog circuit with multiple stages can be constructed to oper-
ate at extremely low supply or bias voltage levels. For example, an input
amplifier stage operating at 0.2V supply voltage has been demonstrated.
ALD110800A/ALD110800/ALD110900A/ALD110900 matched pair
MOSFETs are designed for exceptional device electrical characteristics
matching with the threshold voltage set precisely at +0.00V +/-0.01V , fea-
turing a typical offset voltage of only +/-0.001V (1mV). As these devices
are on the same monolithic chip, they also exhibit excellent tempco track-
ing characteristics. They are versatile as design components for a broad
range of analog applications such as basic building blocks for current
sources, differential amplifier input stages, transmission gates, and multi-
plexer applications.
Besides matched pair electrical characteristics, each individual MOSFET
also exhibits well controlled parameters, enabling the user to depend on
tight design limits. Even units from different batches and different date
of manufacture have correspondingly well matched characteristics.
These devices are built for minimum offset voltage and differential ther-
mal response, and they are designed for switching and amplifying appli-
cations in +0.2V to +10V systems where low input bias current, low input
capacitance, and fast switching speed are desired. The VGS(th) of these
devices is set at +0.00V , which classifies them as both enhancement mode
and depletion mode devices. When the gate is set at 0.00V, the drain
current is +1µA @ VDS = 0.1V, which allows a class of circuits with output
voltage level biased at or near input voltage level without voltage level
shift. These devices exhibit well controlled turn-off and sub-threshold
characteristics of standard enhancement mode MOSFETs.
The ALD110800A/ALD110800/ALD1 10900A/ALD110900 feature high in-
put impedance (1012) and high DC current gain (>108). A sample calcu-
lation of the DC current gain at a drain current of 3mA and input leakage
current of 30pA at 25°C is 3mA/30pA = 100,000,000. For most applica-
tions, connect the V+ pin to the most positive voltage and the V- and IC
pins to the most negative voltage in the system. All other pins must have
voltages within these voltage limits at all times.
QUAD/DUAL N-CHANNEL ZERO THRESHOLD™ EPAD®
PRECISION MATCHED PAIR MOSFET ARRAY
FEATURES
• Precision zero threshold voltage mode
• Nominal RDS(ON) @ VGS = 0.00V of 104K
• Matched MOSFET-to-MOSFET characteristics
• Tight lot-to-lot parametric control
• VGS(th) match (VOS) to 2mV and 10mV max.
• Positive, zero, and negative VGS(th) tempco
• Low input capacitance
• Low input/output leakage currents
APPLICATIONS
• Energy harvesting circuits
• Very low voltage analog and digital circuits
• Zero power fail safe circuits
• Backup battery circuits & power failure detector
• Low level voltage clamp & zero crossing detector
• Source followers and buffers
• Precision current mirrors and current sources
• Capacitives probes and sensor interfaces
• Charge detectors and charge integrators
• Differential amplifier input stage
• High side switches
• Peak detectors and level shifters
• Sample and Hold
• Current multipliers
Analog switches / multiplexers
• Voltage comparators and level shifters
ALD110800A/ALD110800/ALD110900A/ALD110900
ORDERING INFORMATION (“L” suffix denotes lead-free (RoHS))
* Contact factory for industrial temp. range or user-specified threshold voltage values.
Operating Temperature Range*
0°C to +70°C0°C to +70°C
16-Pin 16-Pin 8-Pin 8-Pin
SOIC Plastic Dip SOIC Plastic Dip
Package Package Package Package
ALD110800ASCL ALD110800APCL ALD110900ASAL ALD110900APAL
ALD110800SCL ALD110800PCL ALD110900SAL ALD110900PAL *IC pins are internally connected, connect to V-
SCL, PCL PACKAGES
PIN CONFIGURATIONS
SAL, PAL PACKAGES
VGS(th)= +0.00V
IC*
1
2
314
15
16
413
512
IC*
6
7
8
10
11
GN1
DN1
IC*
DN4
IC*
GN4
9
GN3
DN3
DN2
GN2
V
+
S34
S12
V
-
V
+
V
-
M 4 M 3
M 1 M 2
V
-
V
-
V
-
V
-
V-
G
N1
D
N1
S
12
D
N2
G
N2
1
2
36
7
8
45
M 1 M 2
V-
V-
V-
IC* IC*
ALD110800
ALD110900
ALD110800A/ALD110800/ Advanced Linear Devices 2 of 12
ALD110900A/ALD110900, Vers. 2.4
Notes: 1 Consists of junction leakage currents
OPERATING ELECTRICAL CHARACTERISTICS
V+ = +5V V- = GND TA = 25°C unless otherwise specified
ALD110800A/ALD110900A ALD110800/ALD110900
Parameter Symbol Min Typ Max Min Typ Max Unit Test Conditions
Gate Threshold Voltage VGS(th) -0.02 0.00 0.02 -0.02 0.00 0.02 V IDS =1µA, VDS = 0.1V
Offset Voltage VOS 12 210mV
VGS(th)1-VGS(th)2
Offset Voltage Tempco TCVOS 55µV/°CV
DS1 = VDS2
Gate Threshold Voltage TCVGS(th) -1.7 -1.7 mV/°CI
DS = 1µA, VDS = 0.1V
Tempco 0.0 0.0 IDS = 20µA, VDS = 0.1V
+1.6 +1.6 IDS = 40µA, VDS = 0.1V
Drain Source On Current IDS(ON) 12.0 12.0 mA VGS = +9.5V, VDS = +5V
3.0 3.0 VGS = +4.0V, VDS = +5V
Forward Transconductance GFS 1.4 1.4 mmho VGS = +4.0V
VDS = +9.0V
Transconductance Mismatch GFS 1.8 1.8 %
Output Conductance GOS 68 68 µmho VGS = +4.0V
VDS = +9.0V
Drain Source On Resistance RDS(ON) 500 500 VGS = +4.0V
VDS = +0.1V
Drain Source On Resistance RDS(ON) 104 104 KVGS = +0.0V
VDS = +0.1V
Drain Source On Resistance RDS(ON) 55%V
GS = +4.0V
Tolerance VDS = +0.1V
Drain Source On Resistance RDS(ON) 0.5 0.5 %
Mismatch
Drain Source Breakdown BVDSX 10 10 V V- = VGS = -1.0V
Voltage IDS = 1.0µA
Drain Source Leakage Current1IDS(OFF) 10 400 10 400 pA VGS = -1.0V, VDS =+5V
V- = -5V
44nAT
A = 125°C
Gate Leakage Current1IGSS 5 200 5 200 pA VGS = +5V, VDS = 0V
11nAT
A =125°C
Input Capacitance CISS 2.5 2.5 pF
Transfer Reverse Capacitance CRSS 0.1 0.1 pF
Turn-on Delay Time ton 10 10 ns V+ = 5V, RL= 5K
Turn-off Delay Time toff 10 10 ns V+ = 5V, RL= 5K
Crosstalk 60 60 dB f = 100KHz
Drain-Source voltage, VDS 10.6V
Gate-Source voltage, VGS 10.6V
Power dissipation 500 mW
Operating temperature range SCL, PCL, SAL, PAL 0°C to +70°C
Storage temperature range -65°C to +150°C
Lead temperature, 10 seconds +260°C
CAUTION: ESD Sensitive Device. Use static control procedures in ESD controlled environment.
ABSOLUTE MAXIMUM RATINGS
ALD110800A/ALD110800/ Advanced Linear Devices 3 of 12
ALD110900A/ALD110900, Vers. 2.4
ALD1108xx/ALD1109xx/ALD1148xx/ALD1149xx are monolithic
quad/dual N-Channel MOSFETs matched at the factory using ALD’s
proven EPAD® CMOS technology . These devices are intended for
low voltage, small signal applications.
ALD’s Electrically Programmable Analog Device (EPAD) technol-
ogy provides a family of matched transistors with a range of preci-
sion threshold values. All members of this family are designed and
actively programmed for exceptional matching of device electrical
characteristics. Threshold values range from -3.50V Depletion to
+3.50V Enhancement devices, including standard products speci-
fied at -3.50V, -1.30V, -0.40V, +0.00V, +0.20V, +0.40V, +0.80V,
+1.40V, and +3.30V. ALD can also provide any customer desired
value between -3.50V and +3.50V. For all these devices, even the
depletion and zero threshold transistors, ALD EPAD technology
enables the same well controlled turn-off, subthreshold, and low
leakage characteristics as standard enhancement mode MOSFET s.
With the design and active programming, even units from different
batches and different dates of manufacture have well matched char-
acteristics. As these devices are on the same monolithic chip, they
also exhibit excellent tempco tracking.
This EP AD MOSFET Array product family (EP AD MOSFET) is avail-
able in the three separate categories, each providing a distinctly
different set of electrical specifications and characteristics. The first
category is the ALD110800/ALD110900 Zero-Threshold™ mode
EPAD MOSFETs. The second category is the ALD1108xx/
ALD1109xx enhancement mode EPAD MOSFETs. The third cat-
egory is the ALD1148xx/ALD1149xx depletion mode EPAD
MOSFETs. (The suffix “xx” denotes threshold voltage in 0.1V steps,
for example, xx = 08 denotes 0.80V).
The ALD110800/ALD110900 (quad/dual) are EPAD MOSFETs in
which the individual threshold voltage of each MOSFET is fixed at
zero. The threshold voltage is defined as IDS = 1µA @ VDS = 0.1V
when the gate voltage VGS = 0.00V. Zero threshold devices oper-
ate in the enhancement region when operated above threshold volt-
age and current level (VGS > 0.00V and IDS > 1µA) and subthresh-
old region when operated at or below threshold voltage and cur-
rent level (VGS <= 0.00V and IDS < 1µA). This device, along with
other very low threshold voltage members of the product family,
constitute a class of EPAD MOSFETs that enable ultra low supply
voltage operation and nanopower type of circuit designs, applicable
in either analog or digital circuits.
The ALD1108xx/ALD1109xx (quad/dual) product family features
precision matched enhancement mode EPAD MOSFET devices,
which require a positive bias voltage to turn on. Precision threshold
values such as +1.40V, +0.80V, +0.20V are offered. No conductive
channel exists between the source and drain at zero applied gate
voltage for these devices, except that the +0.20V version has a
subthreshold current at about 20nA.
The ALD1148xx/ALD1149xx (quad/dual) features depletion mode
EPAD MOSFETs, which are normally-on devices when the gate
bias voltage is at zero volts. The depletion mode threshold voltage
is at a negative voltage level at which the EP AD MOSFET turns of f.
Without a supply voltage and/or with VGS = 0.0V the EP AD MOSFET
device is already turned on and exhibits a defined and controlled
on-resistance between the source and drain terminals.
The ALD1148xx/ALD1149xx depletion mode EPAD MOSFETs are
different from most other types of depletion mode MOSFETs and
certain types of JFETs in that they do not exhibit high gate leakage
currents and channel/junction leakage currents. When negative
signal voltages are applied to the gate terminal, the designer/user
can depend on the EPAD MOSFET device to be controlled, modu-
lated and turned off precisely. The device can be modulated and
turned-off under the control of the gate voltage in the same manner
as the enhancement mode EPAD MOSFET and the same device
equations apply.
EP AD MOSFETs are ideal for minimum offset voltage and dif feren-
tial thermal response, and they are used for switching and amplify-
ing applications in low voltage (1V to 10V or +/-0.5V to +/-5V) or
ultra low voltage (less than 1V or +/-0.5V) systems. They feature
low input bias current (less than 30pA max.), ultra low power
(microWatt) or Nanopower (power measured in nanoWatt) opera-
tion, low input capacitance and fast switching speed. These de-
vices can be used where a combination of these characteristics
are desired.
KEY APPLICATION ENVIRONMENT
EP AD MOSFET Array products are for circuit applications in one or
more of the following operating environments:
* Low voltage: 1V to 10V or +/-0.5V to +/-5V
* Ultra low voltage: less than 1V or +/-0.5V
* Low power: voltage x current = power measured in microwatt
* Nanopower: voltage x current = power measured in nanowatt
* Precision matching and tracking of two or more MOSFETs
ELECTRICAL CHARACTERISTICS
The turn-on and turn-off electrical characteristics of the EPAD
MOSFET products are shown in the Drain-Source On Current vs
Drain-Source On Voltage and Drain-Source On Current vs Gate-
Source Voltage graphs. Each graph shows the Drain-Source On
Current versus Drain-Source On V oltage characteristics as a func-
tion of Gate-Source voltage in a different operating region under
different bias conditions. As the threshold voltage is tightly speci-
fied, the Drain-Source On Current at a given gate input voltage is
better controlled and more predictable when compared to many
other types of MOSFETs.
EPAD MOSFETs behave similarly to a standard MOSFET, there-
fore classic equations for a n-channel MOSFET applies to EPAD
MOSFET as well. The Drain current in the linear region (VDS <
VGS - VGS(th)) is given by:
IDS = u . COX . W/L . [VGS - VGS(th) - VDS/2] . VDS
where: u = Mobility
COX = Capacitance / unit area of Gate electrode
VGS = Gate to Source voltage
VGS(th) = Turn-on threshold voltage
VDS = Drain to Source voltage
W = Channel width
L = Channel length
In this region of operation the IDS value is proportional to VDS value
and the device can be used as a gate-voltage controlled resistor.
For higher values of VDS where VDS >= VGS - VGS(th), the satura-
tion current IDS is now given by (approx.):
IDS = u . COX . W/L . [VGS - VGS(th)]2
PERFORMANCE CHARACTERISTICS OF EPAD®
PRECISION MATCHED PAIR MOSFET FAMILY
ALD110800A/ALD110800/ Advanced Linear Devices 4 of 12
ALD110900A/ALD110900, Vers. 2.4
SUB-THRESHOLD REGION OF OPERATION
Low voltage systems, namely those operating at 5V, 3.3V or less,
typically require MOSFETs that have threshold voltage of 1V or
less. The threshold, or turn-on, voltage of the MOSFET is a voltage
below which the MOSFET conduction channel rapidly turns off. For
analog designs, this threshold voltage directly affects the operating
signal voltage range and the operating bias current levels.
At or below threshold voltage, an EPAD MOSFET exhibits a turn-
off characteristic in an operating region called the subthreshold re-
gion. This is when the EPAD MOSFET conduction channel rapidly
turns off as a function of decreasing applied gate voltage. The con-
duction channel induced by the gate voltage on the gate electrode
decreases exponentially and causes the drain current to decrease
exponentially. However, the conduction channel does not shut off
abruptly with decreasing gate voltage. Rather, it decreases at a
fixed rate of approximately 116mV per decade of drain current de-
crease. Thus, if the threshold voltage is +0.20V, for example, the
drain current is 1µA at VGS = +0.20V. At VGS = +0.09V, the drain
current would decrease to 0.1µA. Extrapolating from this, the drain
current is 0.01µA (10nA) at VGS = -0.03V, 1nA at VGS = -0.14V,
and so forth. This subthreshold characteristic extends all the way
down to current levels below 1nA and is limited by other currents
such as junction leakage currents.
At a drain current to be declared “zero current” by the user, the
VGS voltage at that zero current can now be estimated. Note that
using the above example, with VGS(th) = +0.20V, the drain current
still hovers around 20nA when the gate is at zero volts, or ground.
LOW POWER AND NANOPOWER
When supply voltages decrease, the power consumption of a given
load resistor decreases as the square of the supply voltage. So
one of the benefits in reducing supply voltage is to reduce power
consumption. While decreasing power supply voltages and power
consumption go hand-in-hand with decreasing useful AC bandwidth
and at the same time increases noise effects in the circuit, a circuit
designer can make the necessary tradeoffs and adjustments in any
given circuit design and bias the circuit accordingly.
With EPAD MOSFETs, a circuit that performs a specific function
can be designed so that power consumption can be minimized. In
some cases, these circuits operate in low power mode where the
power consumed is measure in micro-watts. In other cases, power
dissipation can be reduced to the nano-watt region and still provide
a useful and controlled circuit function operation.
ZERO TEMPERATURE COEFFICIENT (ZTC) OPERATION
For an EPAD MOSFET in this product family, there exist operating
points where the various factors that cause the current to increase
as a function of temperature balance out those that cause the cur-
rent to decrease, thereby canceling each other , and resulting in net
temperature coefficient of near zero. One of these temperature
stable operating points is obtained by a ZTC voltage bias condi-
tion, which is 0.55V above a threshold voltage when VGS = VDS,
resulting in a temperature stable current level of about 68µA. For
other ZTC operating points, see ZTC characteristics.
PERFORMANCE CHARACTERISTICS
Performance characteristics of the EPAD MOSFET product family
are shown in the following graphs. In general, the threshold voltage
shift for each member of the product family causes other affected
electrical characteristics to shift with an equivalent linear shift in
VGS(th) bias voltage. This linear shift in VGS causes the subthresh-
old I-V curves to shift linearly as well. Accordingly , the subthreshold
operating current can be determined by calculating the gate volt-
age drop relative to its threshold voltage, VGS(th).
RDS(ON) AT VGS = GROUND
Several of the EPAD MOSFETs produce a fixed resistance when
their gate is grounded. For ALD110800, the drain current is 1µA at
VDS = 0.1V and VGS = 0.0V. Thus, just by grounding the gate of
the ALD110800, a resistor with RDS(ON) = ~100K is produced.
When an ALD114804 gate is grounded, the drain current IDS =
18.5µA @ VDS = 0.1V, producing RDS(ON) = 5.4K. Similarly,
ALD114813 and ALD114835 produce drain currents of 77µA and
185µA, respectively, at VGS = 0.0V, and RDS(ON) values of 1.3K
and 540, respectively.
MATCHING CHARACTERISTICS
A key benefit of using a matched pair EPAD MOSFET is to main-
tain temperature tracking. In general, for EPAD MOSFET matched
pair devices, one device of the matched pair has gate leakage cur-
rents, junction temperature effects, and drain current temperature
coefficient as a function of bias voltage that cancel out similar ef-
fects of the other device, resulting in a temperature stable circuit.
As mentioned earlier, this temperature stability can be further en-
hanced by biasing the matched-pairs at Zero Tempco (ZTC) point,
even though that could require special circuit configuration and
power consumption design consideration.
PERFORMANCE CHARACTERISTICS OF EPAD®
PRECISION MATCHED PAIR MOSFET FAMILY (cont.)
ALD110800A/ALD110800/ Advanced Linear Devices 5 of 12
ALD110900A/ALD110900, Vers. 2.4
TYPICAL PERFORMANCE CHARACTERISTICS
5
4
3
2
1
0
1086420
DRAIN-SOURCE ON CURRENT
(mA)
DRAIN-SOURCE ON VOLTAGE (V)
OUTPUT CHARACTERISTICS
TA = +25°C
VGS - VGS(th) = +5V
VGS - VGS(th) = +4V
VGS - VGS(th) = +3V
VGS - VGS(th) = +2V
VGS - VGS(th) = +1V
DRAIN-SOURCE ON CURRENT (µA)
DRAIN-SOURCE ON RESISTANCE
()
2500
2000
1000
1500
0
500
10 10000
100 1000
DRAIN-SOURCE ON RESISTANCE
vs. DRAIN-SOURCE ON CURRENT
VGS = VGS(th) + 4V
VGS = VGS(th) + 6V
TA = +25°C
FORWARD TRANSFER CHARACTERISTICS
DRAIN-SOURCE ON CURRENT
(mA)
GATE-SOURCE VOLTAGE (V)
20
10
0
5
15
-4 0
-2 246810
VGS(th) = -3.5V
VGS(th) = +1.4V
VGS(th) = -0.4V
VGS(th) = 0.0V
VGS(th) = +0.2V
VGS(th) = -1.3V
VGS(th) = +0.8V
TA = +25°C
VDS = +10V
TRANSCONDUCTANCE vs.
AMBIENT TEMPERATURE
TRANSCONDUCTANCE
(mA/V)
AMBIENT TEMPERATURE (°C)
-50 -25 0 25 50 12510075
2.5
2.0
1.5
1.0
0
0.5
10-1-2-3-4
DRAIN-SOURCE ON CURRENT
(nA)
GATE-SOURCE VOLTAGE (V)
SUBTHRESHOLD FORWARD TRANSFER
CHARACTERISTICS
100000
10000
1000
100
10
1
0.1
0.01
2
TA = +25°C
VDS = +0.1V
VGS(th) = -0.4V
VGS(th) = 0.0V
VGS(th) = +0.2V
VGS(th) = -1.3V
VGS(th) = +0.8V
VGS(th) = +1.4V
VGS(th) = -3.5V
SUBTHRESHOLD FORWARD TRANSFER
CHARACTERISTICS
GATE-SOURCE VOLTAGE (V)
DRAIN-SOURCE ON CURRENT
(nA)
10000
1000
100
10
1
0.1
0.01
VGS(th)-0.5 VGS(th)-0.4 VGS(th)-0.3 VGS(th)-0.2 VGS(th)-0.1 VGS(th)
VDS = +0.1V
Slope = 110mV/decade
~
ALD110800A/ALD110800/ Advanced Linear Devices 6 of 12
ALD110900A/ALD110900, Vers. 2.4
TYPICAL PERFORMANCE CHARACTERISTICS (cont.)
5
4
3
2
1
0
DRAIN-SOURCE ON CURRENT
(mA)
DRAIN-SOURCE ON CURRENT, BIAS
CURRENT vs. AMBIENT TEMPERATURE
GATE- AND DRAIN-SOURCE VOLTAGE
(V
GS
= V
DS
) (V)
VGS(th) VGS(th)+3
VGS(th)+2 VGS(th)+4VGS(th)+1VGS(th)-1
+70°C +125°C
-25°C
0°C
-55°C
100
50
0
DRAIN-SOURCE ON CURRENT
(µA)
DRAIN-SOURCE ON CURRENT, BIAS
CURRENT vs. AMBIENT TEMPERATURE
GATE- AND DRAIN-SOURCE VOLTAGE
(VGS = VDS) (V)
VGS(th)+1.0
VGS(th)+0.4 VGS(th)+0.8
VGS(th)+0.2 VGS(th)+0.6
VGS(th)
Zero Temperature
Coefficient (ZTC)
-25°C
+125°C
DRAIN-SOURCE ON CURRENT
(µA)
DRAIN-SOURCE ON RESISTANCE (K)
100000
10000
1000
100
10
1
0.1
0.01
10000
0.1 101 100 1000
DRAIN-SOURCE ON CURRENT vs.
DRAIN-SOURCE ON RESISTANCE
TA = +25°C
V
GS
= -4.0V to +5.4V
VDS = +0.1V VDS = +5V
VDS = +1V
VDS = +10V
GATE-SOURCE VOLTAGE vs.
DRAIN-SOURCE ON CURRENT
GATE-SOURCE VOLTAGE (V)
DRAIN-SOURCE ON CURRENT (µA)
0.1 110010 1000 10000
V
GS(th)
V
GS(th)
+3
V
GS(th)
+2
V
GS(th)
+4
V
GS(th)
+1
V
GS(th)
-1
VDS = +0.5V
TA = +125°C
VDS = +0.5V
TA = +25°C
VDS = +5V
TA = +125°C
S
VDS = RON • IDS(ON)
VDS
IDS(ON)
D
VGS
VDS = +5V
TA = +25°C
5
4
3
2
1
0
DRAIN-SOURCE ON CURRENT
(mA)
OUTPUT VOLTAGE (V)
DRAIN-SOURCE ON CURRENT
vs. OUTPUT VOLTAGE
VGS(th) VGS(th)+3
VGS(th)+2 VGS(th)+4VGS(th)+1 VGS(th)+5
TA = +25°C
VDS = +10V
VDS = +5V
VDS = +1V
AMBIENT TEMPERATURE (°C)
3
2
1
0
-1
-2
-3
-4
4
OFFSET VOLTAGE
(mV)
OFFSET VOLTAGE vs.
AMBIENT TEMPERATURE
-50 -25 0 25 50 12510075
REPRESENTATIVE UNITS
ALD110800A/ALD110800/ Advanced Linear Devices 7 of 12
ALD110900A/ALD110900, Vers. 2.4
TYPICAL PERFORMANCE CHARACTERISTICS (cont.)
GATE LEAKAGE CURRENT
(pA)
AMBIENT TEMPERATURE (°C)
GATE LEAKAGE CURRENT
vs. AMBIENT TEMPERATURE
10000
1000
100
10
1
0.1
0.01 -50 -25 0 25 50 12510075
IGSS
DRAIN-SOURCE ON RESISTANCE (K)
GATE-SOURCE VOLTAGE (V)
GATE SOURCE VOLTAGE vs.
DRAIN-SOURCE ON RESISTANCE
1086420
VGS(th)
VGS(th)+3
VGS(th)+2
VGS(th)+4
VGS(th)+1
VDS
IDS(ON)
D
VGS
S
+25°C
+125°C
0.0V V
DS
5.0V
DRAIN-GATE DIODE CONNECTED
VOLTAGE TEMPCO (mV/°C)
DRAIN-SOURCE ON CURRENT (µA)
DRAIN-GATE DIODE CONNECTED VOLTAGE
TEMPCO vs. DRAIN-SOURCE ON CURRENT
110
100 1000
5
2.5
0
-2.5
-5
-55°C TA +125°C
TRANSFER CHARACTERISTICS
TRANSCONDUCTANCE
(m
-1
)
GATE-SOURCE VOLTAGE (V)
-4 0
-2 2468
1.6
0.8
0.0
0.4
1.2
10
VGS(th) = -3.5V
VGS(th) = -0.4V
VGS(th) = 0.0V
VGS(th) = +0.2V
VGS(th) = -1.3V
VGS(th) = +0.8V
VGS(th) = +1.4V
T
A
= +25°C
V
DS
= +10V
5.02.01.00.50.20.1
GATE-SOURCE VOLTAGE
(V)
DRAIN-SOURCE ON VOLTAGE (V)
ZERO TEMPERATURE
COEFFICIENT CHARACTERISTICS
0.6
0.5
0.3
0.2
0.0
VGS(th) = -3.5V
VGS(th) = -1.3V, -0.4V, 0.0V, +0.2V, +0.8V, +1.4V
GATE-SOURCE VOLTAGE
(V)
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
SUBTHRESHOLD CHARACTERISTICS
100000 10000 1000 100 10 1 0.1
DRAIN-SOURCE ON CURRENT (nA)
VGS(th) = +0.2V
TA = +25°CVGS(th) = +0.2V
TA = +55°C
VGS(th) = +0.4V
TA = +25°C
VGS(th) = +0.4V
TA = +55°C
ALD110800A/ALD110800/ Advanced Linear Devices 8 of 12
ALD110900A/ALD110900, Vers. 2.4
1086420
TARNCONDUCTANCE
(m
-1
)
DRAIN-SOURCE ON CURRENT (mA)
TRANCONDUCTANCE vs.
DRAIN-SOURCE ON CURRENT
1.2
0.9
0.6
0.3
0.0
T
A
= +25°C
V
DS
= +10V
THRESHOLD VOLTAGE vs.
AMBIENT TEMPERATURE
THRESHOLD VOTAGE
(V)
AMBIENT TEMPERATURE (°C)
4.0
2.0
0.0
1.0
3.0
-50 -25 0 25 50 12510075
Vt = +0.8V
Vt = +1.4V
Vt = +0.4V
Vt = +0.2V
Vt = 0.0V
IDS = +1µA
VDS = +0.1V
GATE-SOURCE VOLTAGE
VGS
- VGS(th) (V)
DRAIN-SOURCE ON CURRENT (nA)
0.3
0.2
0.1
0
-0.1
-0.2
-0.3
-0.4 10000 0.1
10 1
100
1000
NORMALIZED SUBTHRESHOLD
CHARACTERISTICS RELATIVE TO
GATE THRESHOLD VOLTAGE
VDS = +0.1V
+55°C
+25°C
SUBTHRESHOLD FORWARD
TRANSFER CHARACTERISTICS
THRESHOLD VOLTAGE
(V)
2.0
1.0
0.0
-1.0
-2.0
-3.0
-4.0
-25 125
25 75
AMBIENT TEMPERATURE (°C)
VGS(th) = -0.4V
VGS(th) = -1.3V
VGS(th) = 0.0V
VGS(th) = -3.5V
IDS = +1µA
VDS = +0.1V
TYPICAL PERFORMANCE CHARACTERISTICS (cont.)
ALD110800A/ALD110800/ Advanced Linear Devices 9 of 12
ALD110900A/ALD110900, Vers. 2.4
16 Pin Plastic SOIC Package
E
D
e
A
A
1
b
S (45°)
L
C
H
S (45°)
ø
Millimeters Inches
Min Max Min MaxDim 1.75
0.25
0.45
0.25
10.00
4.05
6.30
0.937
8°
0.50
0.053
0.004
0.014
0.007
0.385
0.140
0.224
0.024
0°
0.010
0.069
0.010
0.018
0.010
0.394
0.160
0.248
0.037
8°
0.020
1.27 BSC 0.050 BSC
1.35
0.10
0.35
0.18
9.80
3.50
5.70
0.60
0°
0.25
A
A
1
b
C
D-16
E
e
H
L
S
ø
SOIC-16 PACKAGE DRAWING
ALD110800A/ALD110800/ Advanced Linear Devices 10 of 12
ALD110900A/ALD110900, Vers. 2.4
16 Pin Plastic DIP Package
Millimeters Inches
Min Max Min MaxDim
A
A
1
A
2
b
b
1
c
D-16
E
E
1
e
e
1
L
S-16
ø
3.81
0.38
1.27
0.89
0.38
0.20
18.93
5.59
7.62
2.29
7.37
2.79
0.38
0°
5.08
1.27
2.03
1.65
0.51
0.30
21.33
7.11
8.26
2.79
7.87
3.81
1.52
15°
0.105
0.015
0.050
0.035
0.015
0.008
0.745
0.220
0.300
0.090
0.290
0.110
0.015
0°
0.200
0.050
0.080
0.065
0.020
0.012
0.840
0.280
0.325
0.110
0.310
0.150
0.060
15°
PDIP-16 PACKAGE DRAWING
b1
D
S
be
A2
A1
A
L
EE1
ce1ø
ALD110800A/ALD110800/ Advanced Linear Devices 11 of 12
ALD110900A/ALD110900, Vers. 2.4
8 Pin Plastic SOIC Package
Millimeters Inches
Min Max Min MaxDim
A
A1
b
C
D-8
E
e
H
L
S
1.75
0.25
0.45
0.25
5.00
4.05
6.30
0.937
8°
0.50
0.053
0.004
0.014
0.007
0.185
0.140
0.224
0.024
0°
0.010
0.069
0.010
0.018
0.010
0.196
0.160
0.248
0.037
8°
0.020
1.27 BSC 0.050 BSC
1.35
0.10
0.35
0.18
4.69
3.50
5.70
0.60
0°
0.25
ø
SOIC-8 PACKAGE DRAWING
L
C
H
S (45°)
ø
e
A
A1
b
D
S (45°)
E
ALD110800A/ALD110800/ Advanced Linear Devices 12 of 12
ALD110900A/ALD110900, Vers. 2.4
8 Pin Plastic DIP Package
Millimeters Inches
Min Max Min MaxDim
A
A
1
A
2
b
b
1
c
D-8
E
E
1
e
e
1
L
S-8
ø
3.81
0.38
1.27
0.89
0.38
0.20
9.40
5.59
7.62
2.29
7.37
2.79
1.02
0°
5.08
1.27
2.03
1.65
0.51
0.30
11.68
7.11
8.26
2.79
7.87
3.81
2.03
15°
0.105
0.015
0.050
0.035
0.015
0.008
0.370
0.220
0.300
0.090
0.290
0.110
0.040
0°
0.200
0.050
0.080
0.065
0.020
0.012
0.460
0.280
0.325
0.110
0.310
0.150
0.080
15°
PDIP-8 PACKAGE DRAWING
b1
S
b
EE1
D
e
A2
A1
A
L
ce1ø