5 Reasons the MT9V024 is
Ideal for Automotive Systems
Reliable Operation in Extreme Temperatures
The –40 to +105°C operating range meets AEC-Q100
specifications, ensuring optimum performance in harsh
environments.
Context Switching for
Simultaneous Applications
An additional register bank provides the ability to run two
different imaging applications simultaneously from a single
sensor.
Wide Dynamic Range for Superb
High-Contrast Imaging
Extended knee-points provide greater control and excellent
output for excellent output in high-contrast conditions.
Accurate Fast-Motion Capture
The fine shutter control (via sub-row integration) of our
global shutter enables fast-moving object capture without
image tearing.
Small Footprint
Measuring just 9 millimeters square, the MT9V024’s
automotive-grade ball grid array (BGA) package is one of
the smallest in the industry.
Applications
• Lane departure warning
• Adaptive cruise control
• Collision avoidance
• Traffic sign recognition
• Automatic headlamp control
• Pedestrian protection
• Occupant identification
• Drowsiness detection
• Smart airbag deployment
• Vehicle theft identification
• Drive-by wire
• Blind spot detection
WVGA
1/3-inch
Stand-Alone CMOS Sensor
52-ball IBGA
MT9V024
2
3
4
5
1
How to Buy
Production and sample quantities of Aptina
products may be ordered through qualified
distributors. See our Web site for details. You may also request access
to NDA data sheets and other technical documentation by visiting
our Web site.
MT9V024
Features
• Wide dynamic range
• Real-time exposure context-switching; dual register
• Operating temperature range up to +105°C
• Tested to AEC-Q100 specifications
• Monochrome, RGB Bayer, or RCCC (red/clear) color
filters available
• Enhanced near-IR performance
• Programmable to any window size
(QVGA, CIF, QCIF, etc.)
• Progressive or interlaced readout modes
• 2x2 and 4x4 binning at full resolution
• Simple two-wire serial interface
• Automatic and programmable functions:
regionally weighted exposure, black level offset correction,
horizontal blanking, vertical blanking, lighting control,
windowing, left-right and top-bottom image reversal,
regional gain, image decimation, manual or automatic
high dynamic range
Specifications
Imaging Array
• Optical Format: 1/3-inch
• Chief Ray Angle: 7˚
• Active Array: 752(H) x 480(V)
Speed/Output
• Imaging Area: 4.55mm(H) x 2.97mm(V)
• Frame Rate: 60 fps at 752H x 480V;
(higher frame rates at lower resolutions)
• Data Rate: 27 Mp/s
• Master Clock: 26 MHz
• Data Format: Parallel/LVDS (serial); selectable 10 to 8 bits
Sensitivity
• Pixel Size: 6μm x 6μm
• Dynamic Range: 80dB to >100dB
• Responsivity: 4.8 V/lux-sec (550nm)
• Minimum Detectable Light: sub-0.1 lux (mono),
5 lux (color)
Power
• Supply: 3.0–3.6V (3.3V nominal)
• Consumption: <160mW at 60 fps; <120μW standby
Temperature Range
• Operating: –40°C to +105°C
Storage: –50°C to +125°C
Package: automotive qualified 52-ball iBGA
(9mm x 9mm) or die
Parallel
Video
Data Out
Serial
Register
I/O
Control Register
ADCs
Active-Pixel
Sensor (APS)
Array
752H x 480V Timing and Control
Digital Processing
Analog Processing
Serial Video
LVDS Out
Slave Video LVDS In
(for stereo applications only)
Block Diagram
aptina.com
Products are warranted only to meet Aptina’s production data sheet specifications. Products and
specifications are subject to change without notice. Aptina and the Aptina logo are trademarks
of Aptina Imaging Corporation. All other trademarks are the property of their respective owners.
© 2012 Aptina Imaging Corporation. All rights reserved. 5/8/12
