TENSOLITE CABLE ASSEMBLY TECHNICAL DATA SHEET SMA MALE TO SMA MALE ON 461 Q-FLEX(R) CABLE.
ELECTRICAL SPECIFICATIONS
IMPEDANCE, NOMINAL: 50 OHMS
CAPACITANCE NOMINAL: 28.7 pf/FOOT
VELOCITY OF PROPAGATION, NOMINAL: 70.7 %
RELATIVE SHIELDING -90 dB MIN.
INSULATION RESISTANCE: 1000 MEGOHMS MIN.
DIELECTRIC WITHSTANDING VOLTAGE: 1000 VRMS MIN.
ELECTRICAL DELAY: 1.44 ns/FOOT
ELECTRICAL DELAY: 120 ps/INCH
MAX. PULSE RF POWER: 1250 WATTS
(INTO A 50 OHM SYSTEM, WITH DUTY CYCLE LESS THAN CW RATING)
F (IN GHz) --------------> 1 2 4 6 12 18
MAX. CW WATTS ---> 80 56 39 32 21 17
MATERIALS AND FINISHES
DESCRIPTION MATERIAL FINISH OR COLOR
MECHANICAL SPECIFICATIONS: CABLE JACKET: L-P-389 FEP BLUE
MARKER: MIL-I-23053/5 GRAY
CABLE MAX. DIAMETER: 0.110 INCHES BOOTS: MIL-I-23053/4 BLACK
MIN. BEND RADIUS: 0.55 INCHES SMA CONTACTS: ASTM-B-196, BeCu MIL-G-45204 GOLD PLATED
PREFERRED BEND RADIUS: 1.10 INCHES INSULATORS: ASTM-D-1710, PTFE NONE
CONNECTOR RETENTION: 30 POUNDS MIN. SMA BODY: ASTM-A-582, 303 STAINLESS STEEL MIL-G-45204 GOLD PLATED
TEMPERATURE RANGE: -65 / +105 DEGREES C SMA NUT: ASTM-A-582, 303 STAINLESS STEEL MIL-G-45204 GOLD PLATED
MATING TORQUE: 7-10 INCH POUNDS SMA GASKET: ZZ-R-765, SILICON RUBBER RED
SMA CONNECTOR INTERFACE: MIL-STD-348 PAGE 310.3 SOLVENTS: NO OZONE DEPLETING MATERIALS ARE USED
ITEM INFORMATION MECHANICAL CHARACTERISTICS S11 AND S22 CHARACTERISTICS S21 AND S12 CHARACTERISTICS
PART NUMBER LENGTH + - WEIGHT MAXIMUM VSWR :1 AT FREQUENCY (IN GHz.) MAXIMUM INSERTION LOSS IN dB AT FREQ. (IN GHz.) NOM LENGTH
INCHES LENGTH OUNCES UP TO 1 1 TO 2 2 TO 4 4 TO 6 6 TO 12 12 TO 18 UP TO 1 1 TO 2 2 TO 4 4 TO 6 6 TO 12 12 TO 18 DELAY CM
nS
1-3636-461
-
5202 D 2.00 0.25 0.2 1.13 1.18 1.20 1.25 1.30 1.35 0.08 0.12 0.18 0.22 0.32 0.40 0.24 5.08
1-3636-461
-
5203 D 3.00 0.25 0.2 1.13 1.18 1.20 1.25 1.30 1.35 0.10 0.15 0.21 0.27 0.39 0.50 0.36 7.62
1-3636-461
-
5204 D 4.00 0.25 0.3 1.13 1.18 1.20 1.25 1.30 1.35 0.12 0.17 0.25 0.31 0.46 0.59 0.48 10.16
1-3636-461
-
5205 D 5.00 0.25 0.3 1.13 1.18 1.20 1.25 1.30 1.35 0.14 0.20 0.29 0.36 0.54 0.68 0.60 12.70
1-3636-461
-
5206 D 6.00 0.25 0.3 1.13 1.18 1.20 1.25 1.30 1.35 0.15 0.22 0.33 0.41 0.61 0.78 0.72 15.24
1-3636-461
-
5207 7.00 0.25 0.3 1.13 1.18 1.20 1.25 1.30 1.35 0.17 0.25 0.36 0.46 0.68 0.87 0.84 17.78
1-3636-461
-
5208 D 8.00 0.25 0.3 1.13 1.18 1.20 1.25 1.30 1.35 0.19 0.27 0.40 0.50 0.76 0.97 0.96 20.32
1-3636-461
-
5209 9.00 0.25 0.4 1.13 1.18 1.20 1.25 1.30 1.35 0.21 0.30 0.44 0.55 0.83 1.06 1.08 22.86
1-3636-461
-
5210 10.00 0.25 0.4 1.13 1.18 1.20 1.25 1.30 1.35 0.22 0.32 0.48 0.60 0.90 1.16 1.20 25.40
1-3636-461
-
5211 11.00 0.25 0.4 1.13 1.18 1.20 1.25 1.30 1.35 0.24 0.35 0.51 0.65 0.97 1.25 1.32 27.94
1-3636-461
-
5212 D 12.00 0.25 0.4 1.13 1.18 1.20 1.25 1.30 1.35 0.26 0.38 0.55 0.70 1.05 1.34 1.44 30.48
1-3636-461
-
5213 13.00 0.25 0.4 1.13 1.18 1.20 1.25 1.30 1.35 0.28 0.40 0.59 0.74 1.12 1.44 1.56 33.02
1-3636-461
-
5214 14.00 0.25 0.5 1.13 1.18 1.20 1.25 1.30 1.35 0.29 0.43 0.63 0.79 1.19 1.53 1.68 35.56
1-3636-461
-
5215 15.00 0.25 0.5 1.13 1.18 1.20 1.25 1.30 1.35 0.31 0.45 0.67 0.84 1.27 1.63 1.80 38.10
1-3636-461
-
5216 16.00 0.25 0.5 1.13 1.18 1.20 1.25 1.30 1.35 0.33 0.48 0.70 0.89 1.34 1.72 1.92 40.64
1-3636-461
-
5217 17.00 0.25 0.5 1.13 1.18 1.20 1.25 1.30 1.35 0.34 0.50 0.74 0.93 1.41 1.82 2.04 43.18
1-3636-461
-
5218 D 18.00 0.25 0.5 1.13 1.18 1.20 1.25 1.30 1.35 0.36 0.53 0.78 0.98 1.48 1.91 2.16 45.72
1-3636-461
-
5219 19.00 0.25 0.6 1.13 1.18 1.20 1.25 1.30 1.35 0.38 0.55 0.82 1.03 1.56 2.00 2.28 48.26
1-3636-461
-
5220 20.00 0.25 0.6 1.13 1.18 1.20 1.25 1.30 1.35 0.40 0.58 0.85 1.08 1.63 2.10 2.40 50.8
1-3636-461
-
5221 21.00 0.25 0.6 1.13 1.18 1.20 1.25 1.30 1.35 0.41 0.60 0.89 1.13 1.70 2.19 2.52 53.3
1-3636-461
-
5222 22.00 0.25 0.6 1.13 1.18 1.20 1.25 1.30 1.35 0.43 0.63 0.93 1.17 1.78 2.29 2.64 55.9
1-3636-461
-
5223 23.00 0.25 0.7 1.13 1.18 1.20 1.25 1.30 1.35 0.45 0.65 0.97 1.22 1.85 2.38 2.76 58.4
1-3636-461
-
5224 D 24.00 0.25 0.7 1.13 1.18 1.20 1.25 1.30 1.35 0.47 0.68 1.00 1.27 1.92 2.48 2.88 61.0
1-3636-461
-
5225 25.00 0.25 0.7 1.13 1.18 1.20 1.25 1.30 1.35 0.48 0.71 1.04 1.32 1.99 2.57 3.00 63.5
1-3636-461
-
5226 26.00 0.26 0.7 1.13 1.18 1.20 1.25 1.30 1.35 0.50 0.73 1.08 1.36 2.07 2.66 3.12 66.0
1-3636-461
-
5227 27.00 0.27 0.7 1.13 1.18 1.20 1.25 1.30 1.35 0.52 0.76 1.12 1.41 2.14 2.76 3.24 68.6
1-3636-461
-
5228 28.00 0.28 0.8 1.13 1.18 1.20 1.25 1.30 1.35 0.54 0.78 1.15 1.46 2.21 2.85 3.36 71.1
1-3636-461
-
5229 29.00 0.29 0.8 1.13 1.18 1.20 1.25 1.30 1.35 0.55 0.81 1.19 1.51 2.29 2.95 3.48 73.7
1-3636-461
-
5230 30.00 0.30 0.8 1.13 1.18 1.20 1.25 1.30 1.35 0.57 0.83 1.23 1.56 2.36 3.04 3.60 76.2
1-3636-461
-
5231 31.00 0.31 0.8 1.13 1.18 1.20 1.25 1.30 1.35 0.59 0.86 1.27 1.60 2.43 3.14 3.71 78.7
1-3636-461
-
5232 32.00 0.32 0.8 1.13 1.18 1.20 1.25 1.30 1.35 0.60 0.88 1.31 1.65 2.50 3.23 3.83 81.3
1-3636-461
-
5233 33.00 0.33 0.9 1.13 1.18 1.20 1.25 1.30 1.35 0.62 0.91 1.34 1.70 2.58 3.33 3.95 83.8
1-3636-461
-
5234 34.00 0.34 0.9 1.13 1.18 1.20 1.25 1.30 1.35 0.64 0.93 1.38 1.75 2.65 3.42 4.07 86.4
1-3636-461
-
5235 35.00 0.35 0.9 1.13 1.18 1.20 1.25 1.30 1.35 0.66 0.96 1.42 1.79 2.72 3.51 4.19 88.9
1-3636-461
-
5236 36.00 0.36 0.9 1.18 1.20 1.25 1.30 1.35 1.38 0.67 0.98 1.46 1.84 2.80 3.61 4.31 91.4
1-3636-461
-
5239 39.00 0.39 1.0 1.18 1.20 1.25 1.30 1.35 1.38 0.73 1.06 1.57 1.99 3.01 3.89 4.67 99.1
1-3636-461
-
5240 40.00 0.40 1.0 1.18 1.20 1.25 1.30 1.35 1.38 0.74 1.09 1.61 2.03 3.09 3.99 4.79 102
1-3636-461
-
5241 41.00 0.41 1.0 1.18 1.20 1.25 1.30 1.35 1.38 0.76 1.11 1.64 2.08 3.16 4.08 4.91 104
1-3636-461
-
5242 42.00 0.42 1.0 1.18 1.20 1.25 1.30 1.35 1.38 0.78 1.14 1.68 2.13 3.23 4.17 5.03 107
1-3636-461
-
5246 46.00 0.46 1.1 1.18 1.20 1.25 1.30 1.35 1.38 0.85 1.24 1.83 2.32 3.52 4.55 5.51 117
1-3636-461
-
5248 48.00 0.48 1.2 1.18 1.20 1.25 1.30 1.35 1.38 0.88 1.29 1.91 2.42 3.67 4.74 5.75 122
1-3636-461
-
5254 54.0 0.54 1.3 1.18 1.20 1.25 1.30 1.35 1.38 0.99 1.44 2.13 2.70 4.11 5.31 6.47 137
1-3636-461
-
5260 60.0 0.60 1.4 1.18 1.20 1.25 1.30 1.35 1.38 1.09 1.59 2.36 2.99 4.54 5.87 7.19 152
1-3636-461
-
5266 66.0 0.66 1.5 1.18 1.20 1.25 1.30 1.35 1.38 1.19 1.75 2.59 3.28 4.98 6.44 7.91 168
1-3636-461
-
5272 72.0 0.72 1.7 1.18 1.20 1.25 1.30 1.35 1.38 1.30 1.90 2.81 3.56 5.42 7.00 8.63 183
1-3636-461
-
5278 78.0 0.78 1.8 1.20 1.23 1.28 1.33 1.38 1.42 1.40 2.05 3.04 3.85 5.86 7.57 9.35 198
1-3636-461
-
5280 80.0 0.80 1.8 1.20 1.23 1.28 1.33 1.38 1.42 1.44 2.10 3.11 3.95 6.00 7.76 9.59 203
1-3636-461
-
5284 84.0 0.84 1.9 1.20 1.23 1.28 1.33 1.38 1.42 1.51 2.20 3.26 4.14 6.29 8.14 10.1 213
1-3636-461
-
5290 90.0 0.90 2.0 1.20 1.23 1.28 1.33 1.38 1.42 1.61 2.36 3.49 4.42 6.73 8.70 10.8 229
1-3636-461
-
5296 96.0 0.96 2.2 1.20 1.23 1.28 1.33 1.38 1.42 1.71 2.51 3.72 4.71 7.17 9.27 11.5 244
1-3636-461
-
5299 99.0 0.99 2.2 1.20 1.23 1.28 1.33 1.38 1.42 1.77 2.58 3.83 4.85 7.39 9.55 11.9 251
2-3636-461
-
5210 120 1.20 2.6 1.20 1.23 1.28 1.33 1.38 1.42 2.13 3.12 4.62 5.86 8.91 11.5 14.4 305
2-3636-461
-
5212 144 1.44 3.1 1.20 1.23 1.28 1.33 1.38 1.42 2.55 3.73 5.52 7.00 10.7 13.8 17.3 366
2-3636-461
-
5215 180 1.80 3.9 1.20 1.23 1.28 1.33 1.38 1.42 3.17 4.64 6.88 8.72 13.3 17.2 21.6 457
2-3636-461
-
5217 204 2.04 4.4 1.20 1.23 1.28 1.33 1.38 1.42 3.59 5.25 7.78 9.87 15.0 19.5 24.4 518
D = DISTRIBUTOR ITEM MAXIMUM SPECIFICATIONS ARE PRODUCT MAXIMUM PLUS MEASURING SYSTEM UNCERTAINTY.
NOTE: PRODUCT SPECIFICATIONS ARE VERIFIED AT 73 DEG. F, SEA LEVEL AND 20 TO 80% RELATIVE HUMIDITY.
PRODUCT SPECIFICATIONS APPLY AT 5 TO 99% (NON CONDENSING) RELATIVE HUMIDITY, CONSULT FACTORY FOR PRODUCT CHARACTERISTICS AT OTHER CONDITIONS.
Q-FLEX IS A REGISTERED TRADEMARK OF TENSOLITE CO.
VISIT OUR WEB SITE AT http://www.tensolite.com
THESE ASSEMBLIES ARE ALSO AVAILABLE IN RoHS COMPLIANT VERSIONS. TO ORDER, REPLACE THE "1" PREFIX WITH A "Y" OR REPLACE THE "2" PREFIX WITH A "Z".
COPYRIGHT 1998/2004/2007 TENSOLITE.
DATA SUBJECT TO CHANGE file ...\13636\4615299 REV.: 05/16/07
