SIDACtor (R) Protection Thyristors LCAS Protection A0609CA2LRP RoHS RoHS Description The A0609CA2LRP is a LCAS protector that does not require an external voltage reference. It specifically provides protection for a balanced ringing system with a ringing voltage range of +54 volts and -78 volts. This three pin modified DO-214AA solution provides a smaller footprint and lower component count than the typical dual polarity programmable SLIC protector. This new overvoltage protector is applicable for WLL ( Wireless local loops), VoIP (Voice over IP) and regenerated POTS (Plain Old Telephone Systems) applications. Agency Approvals Agency Features and Benefits Agency File Number E133083 Pinout Designation Pin 3 * Robust surge rating * Modified DO-214AA * Switching speeds of nanoseconds * Fixed voltage asymmetrical design * Eliminates the need for large, bulky capacitors and blocking diodes required by traditional programmable solutions * Lower component count solution * Halogen free and RoHS compliant * 2nd level interconnect is Pb-free per IPC/ JEDEC J-STD-609A.01 * Solid-State transient protection Pin 1 Pin 2 Applicable Global Standards Schematic Symbol Edition* * ITU K.20/21 Enhanced Level* * YD/T 1082 * ITU K.20/21 Basic Level * YD/T 993 * GR 1089 Inter-building* * YD/T 950 * GR 1089 Intra-building * IEC 61000-4-5 2nd * Line impedance required to pass operationally Electrical Characteristics Part Number Marking VDRM VS VDRM VS VT @lDRM=5A @100V/s @lDRM=5A @100V/s @IT=2.2 A V min V max Pin 1 to Pin 2 Pin 3 to Pin 2 A0609CA2LRP A0609A 54* 95* V min IDRM IH IS IT Capacitance @1MHz, 3V bias V max A mA min mA max A max pF typ 4 5 120 800 2.2 32 V max Pin 2 to Pin 1 Pin 2 to Pin 3 78** 120** Notes: - Absolute maximum ratings measured at TA= 25C (unless otherwise noted). - Component is asymmetrical * Positive voltage threshold **Negative voltage threshold (c) 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/09/16 i A0609CA2LRP SIDACtor (R) Protection Thyristors LCAS Protection Surge Ratings Series IPP A ITSM 50/60 Hz di/dt A min A min Amps/s max 100 12 500 8/20 1 1.2/50 2 10/1000 1 10/1000 2 5/310 1 10/700 2 A min A min 150 50 Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40C to +85C - The component must initially be in thermal equilibrium with -40C < TJ < +150C 1 Current waveform in s 2 Voltage waveform in s Thermal Considerations Package Symbol Parameter Value Unit Modified DO-214AA TJ Operating Junction Temperature Range -40 to +150 C TS Storage Temperature Range -65 to +150 C R0JA Thermal Resistance: Junction to Ambient 85 C/W Pin 3 Pin 1 Pin 2 V-I Characteristics tr x td Pulse Waveform IPP - Peak Pulse Current - %IPP +I IT VDRM =54V Pin 1 to Pin 2 Pin 3 to Pin 2 IS IH IDRM -V +V VT VDRM VS VDRM =78V Pin 2 to Pin 1 Pin 2 to Pin 3 Peak Value 100 tr = rise time to peak value td = decay time to half value Waveform = tr x td 50 Half Value 0 0 td tr t - Time (s) -I Normalized DC Holding Current vs. Case Temperature 10 IH 8 6 25 C 4 2 IH (TC = 25C) 2.0 14 12 Ratio of Percent of VS Change - % Normalized VS Change vs. Junction Temperature 0 -4 -6 -8 -40 -20 0 1.6 1.4 1.0 0.8 0.6 -40 Junction Temperature (TJ) - C 25C 1.2 0.4 20 40 60 80 100 120 140 160 (c) 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/09/16 1.8 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - C ii A0609CA2LRP SIDACtor (R) Protection Thyristors LCAS Protection Soldering Parameters Pb-Free assembly (see Fig. 1) +150C +200C 60-180 secs. - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Average ramp up rate (Liquidus Temp (TL) to peak) 3C/sec. Max. TS(max) to TL - Ramp-up Rate 3C/sec. Max. Reflow - Temperature (TL) (Liquidus) +217C - Temperature (tL) 60-150 secs. Peak Temp (TP) +260(+0/-5)C Time within 5C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6C/sec. Max. Time 25C to Peak Temp (TP) 8 min. Max. Do not exceed +260C Figure 1 tP TP Critical Zone TL to TP Ramp-up Temperature Reflow Condition TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25C to peak) Time Environmental Specifications Physical Specifications Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated Body Material UL Recognized epoxy meeting flammability classification V-0 High Temp Voltage Blocking 80% Rated VDRM (VAC Peak) +125C or +150C, 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Temp Cycling -65C to +150C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC (+85C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 High Temp Storage +150C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65C, 1008 hrs. Thermal Shock 0C to +100C, 5 min. dwell, 10 sec. transfer, 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) +121C, 100%RH, 2atm, 24 up to 168 hrs. EIA/ JEDEC, JESD22-A-102 Resistance to Solder Heat +260C, 30 secs. MIL-STD-750 (Method 2031) Moisture Sensitivity Level 85%RH, +85C, 168 hrs., 3 reflow cycles (+260C peak). JEDEC-J-STD-020, Level 1 Part Marking Part Numbering A 0609C A 2 L RP TYPE A0609A XXXXX REEL PACK A: Asymmetrical SIDACtor MEDIAN VOLTAGE PACKAGE TYPE RoHS COMPLIANT Part number code Date code CONSTRUCTION VARIABLE IPP RATING (c) 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/09/16 iii A0609CA2LRP SIDACtor (R) Protection Thyristors LCAS Protection Dimensions -- Modified DO-214AA PIN 3 B D M N A B C D E F G H K M N P A C PIN 1 PIN 2 H E J 0.079 (2.0) 0.079 (2.0) F K G 0.079 (2.0) 0.040 (1.0) 0.110 (2.8) 0.030 (0.76) Inches Dimensions P Dimensions are in inches (and millimeters). Millimeters Min Max Min Max 0.130 0.201 0.077 0.159 0.030 0.075 0.002 0.077 0.006 0.022 0.027 0.052 0.156 0.220 0.087 0.181 0.063 0.096 0.008 0.104 0.016 0.028 0.033 0.058 3.30 5.10 1.95 4.05 0.75 1.90 0.05 1.95 0.15 0.56 0.69 1.32 3.95 5.60 2.20 4.60 1.60 2.45 0.20 2.65 0.41 0.71 0.84 1.47 Pad Outline (MM) Packing Options Package Type C Description Quantity Added Suffix Industry Standard Modified DO-214AA 3-leaded Tape and Reel Pack 2500 RP EIA-481-D Tape and Reel Specification -- Modified DO-214AA 0.157 0.157 (4.0) (4.0) Pin 2 0.472 0.472 (12.0) (12.0) 0.36 (9.2) 0.360 (9.2) 0.315 (8.0) 0.315 Dimensions are in inches Pin 1 (8.0) Pin 3 0.059 DIA Cover tape (and millimeters). (1.5) 12.99 (330.0) Dimensions are in inches (and millimeters). 0.512 (13.0) Arbor Hole Dia. Direction of Feed 0.49 (12.4) (c) 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/09/16 iv A0609CA2LRP