LITE-ON SEMICONDUCTOR STPRF1605CT thru 1660CT REVERSE VOLTAGE - 50 to 600 Volts FORWARD CURRENT - 16 Amperes SUPER FAST GLASS PASSIVATED RECTIFIERS TO-220AB FEATURES Glass passivated chip Superfast switching time for high efficiency Low forward voltage drop and high current capability Low reverse leakage current High surge capacity Plastic package has UL flammability classification 94V-0 B L M C D A K E PIN 1 2 DIM. A B C D 3 E F F G MECHANICAL DATA I Case : TO-220AB molded plastic Polarity : As marked on the body Weight : 0.08 ounces, 2.24 grams Mounting position : Any G H I J K J N H H L M PIN 1 12.70 6.35 14.73 2.29 0.51 0.30 3.53 3.56 2.79 1.14 0.64 4.09 4.83 1.14 1.40 2.92 2.03 N All Dimensions in millimeter PIN 2 CASE PIN 3 TO-220AB MAX. MIN. 14.22 15.88 10.67 9.65 3.43 2.54 6.86 5.84 9.28 8.26 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TC=100 C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC METHOD) VRRM VRMS VDC 100 70 100 150 105 150 200 140 200 300 210 300 400 280 400 500 350 500 600 420 600 V V V 16 A IFSM 125 A VF Maximum DC Reverse Current at Rated DC Blocking Voltage IR Typical Junction Capacitance per element (Note 1) 50 35 50 I(AV) Maximum Forward Voltage at 8.0A DC @TJ =25 C @TJ =100 C STPRF STPRF STPRF STPRF STPRF STPRF STPRF STPRF UNIT 1605CT 1610CT 1615CT 1620CT 1630CT 1640CT 1650CT 1660CT 1.3 0.95 1.5 5 500 uA 110 CJ V 80 pF Maximum Reverse Recovery Time (Note 2) TRR Typical Thermal Resistance (Note 3) R0JC 1.5 C/W TJ ,TSTG -55 to +150 C Operating and Storage Temperature Range NOTES : 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Reverse Recovery Test Conditions:IF=0.5A,IR=1.0A,IRR 0.25A. 3.Thermal Resistance Junction to Case. 35 50 ns REV. 3, 13-Sep-2001, KTGC05 RATING AND CHARACTERISTIC CURVES STPRF1605CT thru STPRF1660CT 12 8 4 RESISTIVE OR INDUCTIVE LOAD 0 25 50 75 100 125 150 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 16 150 125 100 75 50 25 Single Half-Sine-Wave (JEDEC METHOD) 0 1 175 2 5 CASE TEMPERATURE , C FIG.3 - TYPICAL REVERSE CHARACTERISTICS 20 50 100 FIG.4 - TYPICAL FORWARD CHARACTERISTICS 100.0 INSTANTANEOUS FORWARD CURRENT ,(A) 100 TJ = 125 C 10.0 TJ = 100 C TJ = 75 C 1.0 TJ = 25 C 0.1 .01 TJ = 125 C 50-200V 10 300-400V 500-600V 1.0 TJ = 25 C PULSE WIDTH 300us 300ua 2% Duty cycle 0.1 0 20 40 60 80 140 120 100 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE , VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT ,(uA) 10 NUMBER OF CYCLES AT 60Hz 50-400V 100 500-600V TJ = 25 C, f= 1MHz 10 0.1 1 4 10 100 REVERSE VOLTAGE , VOLTS REV. 3, 13-Sep-2001, KTGC05