MKP 385 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type l W l FEATURES W h h h' F' (1) F lt P O dt H O dt 10 Dimensions in mm (1) |F - F'| < 0.3 mm F = 7.5 + 0.6/- 0.1 mm 7.5 mm bent back pitch, 10 mm and 15 mm lead pitch. Low contact resistance. Low loss dielectric. Small dimensions for high density packaging. Supplied loose in box and taped on reel. RoHS compliant product. ENCAPSULATION 15 Flame retardant plastic case and epoxy resin UL-class 94 V-0 APPLICATIONS CLIMATIC TESTING CLASS ACC. TO IEC 60068-1 Where steep pulses occur e.g. SMPS (switch mode power supplies). Electronic lighting e.g. ballast. Motor control circuits. 55/110/56 CAPACITANCE RANGE (E24 SERIES) REFERENCE SPECIFICATIONS 0.00047 to 0.033 F IEC 60384-17 CAPACITANCE TOLERANCE 5% MARKING C-value; tolerance; rated voltage; code for dielectric material; manufacturer location; manufacturer's type; manufacturer's logo; year and week LEADS Tinned wire RATED (DC) TEMPERATURE DIELECTRIC 85 C Polypropylene film RATED (AC) TEMPERATURE 85 C ELECTRODES Metallized MAXIMUM APPLICATION TEMPERATURE 110 C CONSTRUCTION Internal serial construction MAXIMUM OPERATING TEMPERATURE FOR LIMITED TIME RATED (DC) VOLTAGE 125 C 1600 V, 2000 V PERFORMANCE GRADE RATED (AC) VOLTAGE Grade 1 (long life) 550 V, 700 V STABILITY GRADE RATED PEAK-TO-PEAK VOLTAGE Grade 2 1600 V, 2000 V DETAIL SPECIFICATION For more detailed data and test requirements contact: dc-film@vishay.com Document Number: 28152 Revision: 13-Oct-08 For technical questions, contact: dc-film@vishay.com www.vishay.com 159 MKP 385 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type COMPOSITION OF CATALOG NUMBER MULTIPLIER (nF) TYPE AND PITCHES 10.0/7.5 mm 385 15.0/7.5 mm CAPACITANCE 10.0 mm (numerically) 15.0 mm 0.1 2 1 3 10 4 100 5 Example: 104 = 10 x 10 = 100 nF BFC2 385 2222(1) 385 (1) XX YY Y XX YY Y old ordering number PREFERRED TYPES TYPE PACKAGING LEAD CONFIGURATION Loose in box lead length 3.5 + 1/- 0.5 mm or 3.5 0.3 mm 5% 00 50 60 80 Taped on reel (1) H = 18.5 mm; P0 = 12.7 mm reel diameter = 500 mm 5% 02 52 62 82 Taped on reel (bent back to 7.5 mm) (1) H = 16.0 mm; P0 = 15.0 mm reel diameter = 500 mm 5% 03 53 63 83 C-TOL. 385 1600 V 2000 V Ammopack (1) H = 18.5 mm; P0 = 12.7 mm 5% 06 56 66 86 Ammopack (bent back to 7.5 mm) (1) H = 16.0 mm; P0 = 15.0 mm 5% 08 58 68 88 Loose in box lead length 5.0 1.0 mm 5% 01 51 61 81 Loose in box lead length 25.0 2.0 mm 5% 04 54 64 84 Taped on reel (bent back to 7.5 mm) (1) H = 16.0 mm; P0 = 15.0 mm reel diameter = 356 mm 5% 05 55 65 85 Loose in box lead length 3.2 + 0.3/- 0.6 mm 5% 07 57 67 87 ON REQUEST 385 Note (1) For detailed tape specifications refer to "Packaging Information" www.vishay.com/doc?28139 or end of catalog SPECIFIC REFERENCE DATA (1600 Vdc) VALUE DESCRIPTION Tangent of loss angle: at 10 kHz at 100 kHz 5x 15 x 10-4 10-4 Rated voltage pulse slope (dU/dt)R P = 10 mm and 10 mm bent back to 7.5 mm P = 15 mm and 15 mm bent back to 7.5 mm > 4000 V/s > 2000 V/s R between leads, for C 1 F at 500 V; 1 min > 100 000 M R between leads and case; 500 V; 1 min > 30 000 M Ionization (AC) voltage (typical value) at 20 pC peak discharge > 600 V Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 min Withstanding (DC) voltage between leads and case 2840 V; 1 min Maximum application temperature www.vishay.com 160 110 C For technical questions, contact: dc-film@vishay.com Document Number: 28152 Revision: 13-Oct-08 MKP 385 AC and Pulse Metallized Polypropylene Film Capacitors Vishay BCcomponents MKP Radial Potted Type URdc = 1600 V; URac = 550 V; Up-p = 1600 V; C-tol. = 5 % CATALOG NUMBER BFC2 385 XXYYY AND PACKAGING LOOSE IN BOX C (F) Dimensions w x h (h') x l (mm) Mass (g) (1) Leads Leads 25.0 3.5 + 1/ - 0.5 mm (2) 2.0 mm XX (SPQ) XX (SPQ) Pitch = 10 0.4 mm; dt = 0.60 0.06 mm 0.002 0.0022 0.0024 0.0027 0.003 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 Original Pitch XX (SPQ) Pitch = 10.0 mm Pitch = 7.5 mm (bent back) O 500 mm O 365 mm XX XX (SPQ) (SPQ) Pitch = 7.5 mm (bent back) Original pitch Pitch = 7.5 mm (bent back) XX (SPQ) Pitch = 10.0 mm XX (SPQ) Pitch = 7.5 mm (bent back) 0.66 50... (1000) 54... (1250) 52... (1400) 53... (2000) - 56... (950) 58... (1300) 5.0 x 11.0 (13.0) x 12.5 0.90 50... (1000) 54... (1250) 52... (1000) 53... (1900) - 56... (750) 58... (1000) 6.0 x 12.0 (14.0) x 12.5 1.1 50... (750) 54... (750) 52... (900) 53... (1500) - 56... (600) 58... (850) Pitch = 15.0 mm 5.0 x 11.0 (13.0) x 17.5 6.0 x 12.0 (14.0) x 17.5 1.1 1.4 04... (1000) 02... (1100) 03... 950) 05... (550) 50... (1250) 54... (1000) 52... (1100) 53... (950) 55... (550) 50... (1000) 54... (1000) 52... (900) 53... (800) 55... (450) Pitch = 15.0 mm 0.013 7.0 x 13.5 (15.5) x 17.5 2.0 0.015 0.016 0.018 0.020 8.5 x 15.0 (17.0) x 17.5 2.5 0.022 0.024 0.027 10.0 x 16.5 (18.5) x 17.5 3.3 0.030 0.033 Notes (1) Net weight for short lead component (2) l = 3.5 0.3 mm for pitch = 15 mm t * SPQ = Standard Packing Quantity Document Number: 28152 Revision: 13-Oct-08 ..YYY 202 222 242 272 302 332 362 392 432 472 512 562 622 682 Pitch = 7.5 mm (bent back) 00... (1250) Pitch = 15 0.4 mm; dt = 0.80 0.08 mm C VALUE AMMOPACK 4.0 x 10.0 (12.0) x 12.5 Pitch = 15 0.4 mm; dt = 0.60 0.06 mm 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 0.0075 0.0082 0.0091 0.010 0.011 0.012 REEL - 392 432 472 512 562 622 682 752 822 912 103 113 123 - 133 153 163 183 203 223 243 273 303 333 Pitch = 7.5 mm (bent back) 50... (1000) 54... (500) 52... (800) 53... (700) 55... (400) 50... (1000) 54... (500) 52... (650) 53... (550) 55... (300) 50... (500) 54... (500) 52... (600) 53... (500) 55... (250) For technical questions, contact: dc-film@vishay.com www.vishay.com 161 MKP 385 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type SPECIFIC REFERENCE DATA (2000 Vdc) VALUE DESCRIPTION Tangent of loss angle: at 10 kHz at 100 kHz 5 x 10-4 15 x 10-4 Rated voltage pulse slope (dU/dt)R P = 10 mm and 10 mm bent back to 7.5 mm > 4000 V/s P = 15 mm and 15 mm bent back to 7.5 mm > 2000 V/s R between leads, for C 1 F at 500 V; 1 min > 100 000 M R between leads and case; 500 V; 1 min > 30 000 M Ionization (AC) voltage (typical value) at 20 pC peak discharge > 750 V Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3200 V; 1 min Withstanding (DC) voltage between leads and case 2840 V; 1 min Maximum application temperature 110 C URdc = 2000 V; URac = 700 V; Up-p = 2000 V; C-tol. = 5 % CATALOG NUMBER BFC2 385 XXYYY AND PACKAGING LOOSE IN BOX Dimensions w x h (h') x l (mm) C (F) Mass (g) (1) Leads 3.5 + 1/ - 0.5 mm (2) XX (SPQ) REEL Leads 25.0 2.0 mm Original pitch XX (SPQ) XX (SPQ) Pitch = 10 0.4 mm; dt = 0.60 0.06 mm AMMOPACK Pitch = 7.5 mm (bent back) O 500 mm XX (SPQ) Pitch = 10.0 mm O 365 mm Original pitch XX XX (SPQ) (SPQ) Pitch = 7.5 mm (bent back) C VALUE Pitch = 7.5 mm (bent back) XX (SPQ) Pitch = 10.0 mm ..YYY Pitch = 7.5 mm 0.00047 471 0.00051 511 0.00056 561 0.00062 621 0.00068 681 0.00075 751 0.00082 0.00091 4.0 x 10.0 (12.0) x 12.5 0.66 60... (1000) 64... (1250) 62... (1400) 63... (2000) - 66... (950) 68... (1300) 821 911 0.001 102 0.0011 112 0.0012 122 0.0013 132 0.0015 152 0.0016 162 0.0018 182 0.002 0.0022 5.0 x 11.0 (13.0) x 12.5 0.90 60... (1000) 64... (1000) 62... (1100) 63... (1900) - 66... (750) 68... (1000) 202 222 0.0024 242 0.0027 272 0.003 0.0033 6.0 x 12.0 (14.0) x 12.5 1.1 60... (750) 64... (750) 62... (900) 63... (1500) 0.0036 - 66... (600) 68... (850) 302 332 362 Notes (1) Net weight for short lead component (2) l = 3.5 0.3 mm for pitch = 15 mm t * SPQ = Standard Packing Quantity www.vishay.com 162 For technical questions, contact: dc-film@vishay.com Document Number: 28152 Revision: 13-Oct-08 MKP 385 AC and Pulse Metallized Polypropylene Film Capacitors Vishay BCcomponents MKP Radial Potted Type CATALOG NUMBER BFC2 385 XXYYY AND PACKAGING LOOSE IN BOX C (F) Dimensions w x h (h') x l (mm) Mass (g) (1) Leads 3.5 + 1/ - 0.5 mm (2) XX (SPQ) Leads 25.0 2.0 mm Original pitch XX (SPQ) XX (SPQ) Pitch = 15.0 Pitch = 15 0.4 mm; dt = 0.60 0.06 mm 0.00047 0.00051 0.00056 0.00062 0.00068 0.00075 0.00082 0.00091 0.0010 0.0011 0.0012 0.0013 0.0015 0.0016 0.0018 5.0 x 11.0 (13.0) x 17.5 1.1 80... (1250) 84... (1000) 5.0 x 11.0 (13.0) x 17.5 6.0 x 12.0 (14.0) x 17.5 Document Number: 28152 Revision: 13-Oct-08 Pitch = 7.5 mm (bent back) O 500 mm O 365 mm XX XX (SPQ) (SPQ) Pitch = 7.5 mm (bent back) 83... (950) 85... (550) Pitch = Original 7.5 mm pitch (bent back) XX (SPQ) XX (SPQ) - - 202 222 242 272 302 332 362 392 432 472 512 562 622 682 - 752 822 912 103 113 123 133 153 163 183 203 Pitch = 7.5 mm (bent back) 84... (1000) 82... (1100) 83... (950) 85... (550) 60... (1250) 64... (1000) 62... (1100) 63... (950) 65... (550) 60... (1000) 64... (1000) 62... (900) 63... (800) 65... (450) Pitch = 15.0 ..YYY 471 511 561 621 681 751 821 911 102 112 122 132 152 162 182 1.1 1.4 C VALUE AMMOPACK 80... (1250) Pitch = 15 0.4 mm; dt = 0.80 0.08 mm 0.0075 0.0082 7.0 x 13.5 (15.5) x 17.5 0.0091 0.010 0.011 8.5 x 15.0 (17.0) x 17.5 0.012 0.013 0.015 0.016 10.0 x 16.5 (18.5) x 17.5 0.018 0.020 Notes (1) Net weight for short lead component (2) l = 3.5 0.3 mm for pitch = 15 mm t * SPQ = Standard Packing Quantity 82... (1100) Pitch = 15.0 Pitch = 15 0.4 mm; dt = 0.60 0.06 mm 0.0020 0.0022 0.0024 0.0027 0.0030 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 REEL Pitch = 7.5 mm (bent back) 2 60... (1000) 64... (500) 62... (800) 63... (700) 65... (400) 2.5 60... (1000) 64... (500) 62... (650) 63... (550) 65... (300) 3.3 60... (500) 64... (500) 62... (600) 63... (500) 65... (250) For technical questions, contact: dc-film@vishay.com www.vishay.com 163 MKP 385 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type MOUNTING Normal use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to "Packaging Information" www.vishay.com/doc?28139 or end of catalog Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. The capacitors shall be mechanically fixed by the leads. Space Requirements on Printed-Circuit Board The maximum length and width of film capacitors is shown in the drawing: * Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. * Product height with seating plane as given by "IEC 60717" as reference: hmax. h + 0.3 mm. bmax. = b + 0.3 mm Eccentricity Imax. = I + 0.3 mm Storage Temperature * Storage temperature: Tstg = - 25 C to + 40 C with RH maximum 80 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 C 1 C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % 2 %. For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. www.vishay.com 164 For technical questions, contact: dc-film@vishay.com Document Number: 28152 Revision: 13-Oct-08 MKP 385 AC and Pulse Metallized Polypropylene Film Capacitors Vishay BCcomponents MKP Radial Potted Type CHARACTERISTICS Capacitance as a function of ambient temperature (typical curve) (1 kHz) Impedance as a function of frequency (typical curve) 102 Impedance () C/C (%) 4 2 0 101 100 -2 10 nF 1.0 nF 10-1 -4 10-2 -6 -8 - 60 - 20 0 20 50 Tamb (C) 100 130 10-3 104 105 106 107 f (Hz) 108 Max. DC and AC voltage as a function of temperature factor 1.2 1.0 0.8 0.6 0.4 0.2 0.0 - 60 - 20 20 60 100 Tamb (C) Max. RMS voltage as a function of frequency Max. RMS voltage as a function of frequency 103 Tamb 85 C, 1600 Vdc 101 103 104 105 Document Number: 28152 Revision: 13-Oct-08 AC Voltage (V) 102 106 107 f (Hz) 108 nF 2 F 2. 7 n F 4. 0 n nF 1 2 nF 23 3 102 nF 2.27 nFF 4. n 102 nFF 2 3n 3 AC Voltage (V) 103 85 C < Tamb 110 C, 1600 Vdc 101 102 103 104 105 For technical questions, contact: dc-film@vishay.com 106 f (Hz) 107 www.vishay.com 165 MKP 385 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type Max. RMS voltage as a function of frequency Max. RMS voltage as a function of frequency 103 102 Tamb 85 C, 2000 Vdc 101 103 104 105 AC Voltage (V) nF 0 F 1. 2 n F 2. .7 n F 4 0n F 1 0n 2 nF 0 F 1. .2 n nF 2 7 4. 0 nF F 1 0n 2 AC Voltage (V) 103 102 106 107 108 f (Hz) 85 C < Tamb 110 C, 2000 Vdc 101 102 103 104 105 Insulation resistance as a function of ambient temperature (typical curve) 106 f (Hz) 107 Maximum allowed component temperature rise (T) as a function of ambient temperature (Tamb) 106 RC (s) T (C) 12 8 105 4 104 0 0 30 60 90 Tamb (C) 120 0 30 60 90 Tamb (C) 130 Tangent of loss angle as a function of frequency (typical curve) 103 1600 V: C 0.0068 F: curve 2 C 0.033 F: curve 3 102 2000 V: C 0.0036 F: curve 1 C 0.020 F: curve 2 3 2 1 101 100 102 www.vishay.com 166 103 104 105 f (Hz) 106 For technical questions, contact: dc-film@vishay.com Document Number: 28152 Revision: 13-Oct-08 MKP 385 AC and Pulse Metallized Polypropylene Film Capacitors Vishay BCcomponents MKP Radial Potted Type HEAT CONDUCTIVITY (G) AS A FUNCTION OF ORIGINAL PITCH AND CAPACITOR BODY THICKNESS IN mW/C HEAT CONDUCTIVITY (mW/C) Wmax. (mm) PITCH 10 mm PITCH 15 mm 4.0 6.5 - 5.0 7.5 10 6.0 9.0 11 7.0 - 12 8.5 - 16 10.0 - 18 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according type detail specification "HQN-384-01/101: Technical Information Film Capacitors" with the typical tgd of the curves. The component temperature rise (T) can be measured (see section "Measuring the Component Temperature" for more details) or calculated by T = P/G: * T = Component temperature rise (C) * P = Power dissipation of the component (mW) * G = Heat conductivity of the component (mW/C) MEASURING THE COMPONENT TEMPERATURE A thermocouple must be attached to the capacitor body as in: Thermocouple The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by T =Tc - Tamb. To avoid radiation or convection, the capacitor should be tested in a wind-free box. Document Number: 28152 Revision: 13-Oct-08 For technical questions, contact: dc-film@vishay.com www.vishay.com 167 MKP 385 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc) 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum (Up-p) to avoid the ionisation inception level 3. The voltage peak slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: T 2 2 x dU x dt < URdc x dU dt dt 0 rated T is the pulse duration 4. The maximum component surface temperature rise must be lower than the limits (see figure max allowed component temp rise) 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in the table: "Heat conductivity" 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included). Voltage Conditions for 6 Above ALLOWED VOLTAGES Maximum continuous RMS voltage Maximum temporary RMS-overvoltage (< 24 h) Maximum peak voltage (Vo-p) (< 2 s) Tamb 85 C 85 C < Tamb 110 C 110 C < Tamb 125 C URac 1.25 x URac 1.6 x URdc 0.7 x URac 0.875 x URac 1.1 x URdc 0.5 x URac 0.625 x URac 0.8 x URdc EXAMPLE C = 4n7 1600 V used for the voltage signal shown in next figure. Up-p = 1000 V; Up = 900 V; T1 = 12 s; T2 = 64 s; T3 = 4 s The ambient temperature is 80 C. In case of failure, the oscillation is blocked. Checking the conditions: 1. The peak voltage Up = 900 V is lower than 1600 Vdc 2. The peak-to-peak voltage 1000 V is lower than 2 2 x 550 Vac = 1600 Up-p 3. The voltage pulse slope dU/dt = 1000 V/4 s = 250 V/s. This is lower than 4000 V/s (see specific reference data for each version) 4. The dissipated power is 35 mW as calculated with Fourier terms and typical tgd. The temperature rise for wmax. = 6.0 and pitch = 10 mm will be 35 mW/9 mW/C = 3.9 C This is lower than 10 C temperature rise at 80 C, acc. figure. 5. Oscillation is blocked 6. Not applicable Voltage signal: Voltage Up Up-p Time T3 T1 T2 www.vishay.com 168 For technical questions, contact: dc-film@vishay.com Document Number: 28152 Revision: 13-Oct-08 MKP 385 AC and Pulse Metallized Polypropylene Film Capacitors Vishay BCcomponents MKP Radial Potted Type INSPECTION REQUIREMENTS General Notes: Sub-clause numbers of tests and performance requirements refer to the "Sectional Specification, Publication IEC 60384-17 and Specific Reference Data". Group C Inspection Requirements SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapters "General Data" of this specification 4.3.1 Initial measurements Capacitance Tangent of loss angle at 100 kHz 4.3 Robustness of terminations Tensile: Load 10 N; 10 s Bending: Load 5 N; 4 x 90 4.4 Resistance to soldering heat Method: 1A Solder bath: 280 C 5 C Duration: 10 s 4.14 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 0.5 min Recovery time: Min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 1 % + 5 pF of the value measured initially Tangent of loss angle Increase of tan : 0.0005 Compared to values measured in 4.3.1 No visible damage SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.6.1 Initial measurements Capacitance Tangent of loss angle at 100 kHz 4.15 Solvent resistance of the marking Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 0.5 min 4.6 Rapid change of temperature 4.6.1 4.7 Inspection Vibration A = - 55 C B = + 105 C 5 cycles Duration t = 30 min Visual examination Mounting: See section "Mounting" of this specification Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s (whichever is less severe) Total duration 6 h Document Number: 28152 Revision: 13-Oct-08 No visible damage Legible marking No visible damage For technical questions, contact: dc-film@vishay.com www.vishay.com 169 MKP 385 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 4.7.2 Final inspection Visual examination No visible damage 4.9 Shock 4.9.3 Final measurements Mounting: See section "Mounting" of this specification Pulse shape: Half sine Acceleration: 490 m/s Duration of pulse: 11 ms Visual examination No visible damage Capacitance Tangent of loss angle Insulation resistance For C |C/C| 2 % or of the value measured in 4.6.1. Increase of tan : 0.0005 Compared to values measured in 4.6.1 As specified in section "Insulating Resistance" of this specification SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.10 Climatic sequence 4.10.2 Dry heat 4.10.3 Damp heat cyclic Test Db, first cycle Cold 4.10.4 Damp heat cyclic Test Db, remaining cycles 4.10.6.2 Final measurements Temperature: + 105 C Duration: 16 h Temperature: - 55 C Duration: 2 h 4.10.6 Voltage proof = URdc for 1 min within 15 min after removal from testchamber Visual examination Capacitance Tangent of loss angle Insulation resistance No breakdown of flash-over No visible damage Legible marking |C/C| 2 % of the value measured in 4.4.2 or 4.9.3 Increase of tan : 0.005 Compared to values measured in 4.3.1 or 4.6.1 50 % of values specified in section "Insulation Resistance" of this specification SUB-GROUP C2 4.11 Damp heat steady state 56 days, 40 C, 90 % to 95 % RH no load 4.11.1 Initial measurements Capacitance Tangent of loss angle at 1 kHz 4.11.3 Final measurements Voltage proof = URdc for 1 min within 15 min after removal from testchamber No breakdown of flash-over Visual examination No visible damage Legible marking Capacitance |C/C| 1 % + 5 pF of the value measured in 4.11.1. Tangent of loss angle Increase of tan 0.0005 Compared to values measured in 4.11.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification www.vishay.com 170 For technical questions, contact: dc-film@vishay.com Document Number: 28152 Revision: 13-Oct-08 MKP 385 AC and Pulse Metallized Polypropylene Film Capacitors Vishay BCcomponents MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB GROUP C3A 4.12.1 Endurance Duration: 2000 h Temperature: 85 C Voltage: 1.25 x URac Vrms, 50 Hz Duration: 2000 h Temperature: 105 C 4.12.1.1 Initial measurements Voltage: 0.875 x URac Vrms, 50 Hz Capacitance Tangent of loss angle at 100 kHz 4.12.1.3 Final measurements Visual examination No visible damage Legible marking Temperature: 85 C Capacitance |C/C| 5 % for C > 10 nF |C/C| 8 % for C 10 nF compared to values measured in 4.12.1.1 Tangent of loss angle Increase of tan : 0.005 Compared to values measured in 4.12.1.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification SUB GROUP C3B 4.12.2 Endurance test at 50 Hz alternating voltage Duration: 500 h Voltage: 4.12.2.1 Initial measurements 0.625 x URac at 125 C Capacitance Tangent of loss angle: 4.12.2.3 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 10 % for C + 100 pF compared values measured in 4.42.2.1 Tangent of loss angle Increase of tan : 0.0005 Compared to values measured in 4.12.2.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification SUB-GROUP C4 4.2.6 Temperature characteristics Initial measurements Intermediate measurements Final measurement Capacitance Capacitance at - 55 C Capacitance at - 20 C Capacitance at + 125 C Capacitance Insulation resistance Document Number: 28152 Revision: 13-Oct-08 For - 55 C to + 20 C: + 1 % |C/C| 3.75 % or for 20 C to 125 C - 7.5 % |C/C| 0 % compared to values measured in 4.12.1.1 As specified in section "Capacitance" of this specification As specified in chapters "Insulation Resistance" of this specification For technical questions, contact: dc-film@vishay.com www.vishay.com 171 MKP 385 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C4 4.13 Charge and discharge 10 000 cycles Charged to UR Vdc Discharge resistance: UR R = ------------------------------------------------C x 2.5 x ( dU dt ) R 4.13.1 Initial measurements Capacitance Tangent of loss angle: at 100 kHz or 4.13.3 Final measurements Capacitance |C/C| 1 % compared to values measured in 4.13.1 Tangent of loss angle Increase of tan : 0.0005 Compared to values measured in 4.13.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification SUB-GROUP ADD 1 A.1 Ignition of lamp test A.1.1 Initial measurements Capacitance Tangent of loss angle at 100 kHz A.1. 2 Ignition of lamp test Temperature: 85 C 1000 cycles: 1 s ON 29 s OFF Frequency: 60 kHz Voltage: 1600 V type: 2800 Vpp 2000 V type: 3000 Vpp A.1. 2 Final measurements Visual examination Capacitance No visible damage |C/C| 5 % of the value measured in Tangent of loss angle at 100 kHz A.1.1Increase of tan : 0.0005 Compared to values measured in A.1.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification www.vishay.com 172 For technical questions, contact: dc-film@vishay.com Document Number: 28152 Revision: 13-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1