M49465 Military, RLV www.vishay.com Vishay Dale Wirewound Resistors, Precision Power, Low Value, Military, MIL-PRF-49465 Qualified, Type RLV, Axial Lead FEATURES * Ideal for all types of current sensing applications including switching and linear power supplies, instruments and power amplifiers * Proprietary processing technique produces extremely low resistance values * Excellent load life stability * Low inductance * Cooler operation for high power to size ratio STANDARD ELECTRICAL SPECIFICATIONS MILITARY MODEL VISHAY REFERENCE MODEL POWER RATING P25 C W RESISTANCE RANGE TOLERANCE % TECHNOLOGY M4946501 (RLV10) SPR1005...26 5 0.01 to 0.5 1, 3, 5 Coil spacewound M4946506 (RLV30) LVR03...26 3 0.01 to 0.2 1, 3, 5 Metal strip M4946507 (RLV31) LVR05...26 5 0.01 to 0.3 1, 3, 5 Metal strip TECHNICAL SPECIFICATIONS PARAMETER UNIT M4946501 (RLV10) M4946506 (RLV30) Operating Temperature Range C Dielectric Withstanding Voltage VRMS 1000 1000 M minimum dry Short Time Overload - 5 x rated power for 5 s Terminal Strength (minimum) lb Insulation Resistance M4946507 (RLV31) - 55 to + 275 10 Temperature Coefficient (0.01 to 0.0249 ) ppm/C 150 350 Temperature Coefficient (0.025 to 0.0499 ) ppm/C 125 200 150 Temperature Coefficient (0.05 to 0.0749 ) ppm/C 100 125 100 Temperature Coefficient (0.075 to 0.099 ) ppm/C 50 75 75 Temperature Coefficient ( 0.1 ) ppm/C 50 50 50 Maximum Working Voltage V Weight (typical) g 250 (P x R)1/2 6.35 2 5 GLOBAL PART NUMBER INFORMATION Military Part Numbering example: M4946506TR0100FB12 M 4 9 4 6 5 0 6 T R 0 1 0 0 F B 1 2 MIL TYPE SPEC. SHEET NUMBER CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE PACKAGING CODE M49465 01 (RLV10) 06 (RLV30) 07 (RLV31) T R0100 = 0.01 R1000 = 0.10 F = 1.0 % H = 3.0 % J = 5.0 % B12 = Bulk pack (RLV30/RLV31) S70 = Tape/reel (RLV30) S73 = Tape/reel (RLV31) S51 = Skin pack (RLV10) Revision: 06-Dec-11 Document Number: 30283 1 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 M49465 Military, RLV www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] M4946501 (RLV10) 1.50 [38.10] minimum M4946506 (RLV30), M4946507 (RLV31) 0.125 [3.17] typical (1) A C 1.50 [38.10] (1) minimum A B C B DIMENSIONS in inches [millimeters] MILITARY MODEL A 0.937 0.062 [23.80 1.57] 0.560 0.031 [14.22 0.787] 0.925 0.031 [23.50 0.787] M4946501 (RLV01) M4946506 (RLV30) M4946507 (RLV31) B 0.375 0.031 [9.53 0.787] 0.205 0.031 [5.21 0.787] 0.330 0.031 [8.38 0.787] C 0.040 0.005 [1.02 0.130] 0.036 0.005 [0.90 0.130] 0.040 0.005 [1.02 0.130] Note (1) On some standard reel pack methods, the leads may be trimmed to a shorter length than shown MATERIAL SPECIFICATIONS Element: Self-supporting nickel-chrome alloy (M4946501 (RLV10) utilizes manganin for some values) Encapsulation: High temperature mold compound Terminals: Tinned copper Packaging: Reference "Wirewound Through Hole Resistor Packaging" document: www.vishay.com/doc?21028 EXAMPLE 91637 1101 M4946507 TR0100F Source code Date code YYMM MIL-PRF-49465 model Characteristic, resistance type designation, tolerance DERATING 250 RATER POWER IN % SURFACE TEMPERATURE IN C SURFACE TEMPERATURE VS. POWER MARKING 200 M4946506 (RLV30) 150 M4946507 (RLV31) 120 100 80 60 100 40 50 0 20 0 1 2 3 4 5 0 - 55 - 25 25 75 POWER IN W 125 175 225 275 AMBIENT TEMPERATURE IN C PERFORMANCE TEST Thermal Shock Short Time Overload Low Temperature Storage High Temperature Exposure Dielectric Withstanding Voltage Insulation Resistance Moisture Resistance Shock, Specified Pulse Vibration, High Frequency Load Life Solderability Bias Humidity Revision: 06-Dec-11 CONDITIONS OF TEST - 65 C to + 125 C, 5 cycles, 15 min at each extreme 5 x rated power for 5 s - 55 C for 24 h 250 h at + 275 C 1000 VRMS, 1 min MIL-STD-202 method 302, 100 V MIL-STD-202 Method 106, 7b not applicable MIL-STD-202 Method 213, 100 g's for 6 ms, 10 shocks Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each 2000 h at rated power, + 25 C, 1.5 h "ON", 0.5 h "OFF" ANSI J-STD-002 + 85 C, 85 % RH, 10 % bias, 1000 h TEST LIMITS (0.2 % + 0.0005 ) R (0.5 % + 0.0005 ) R (0.2 % + 0.0005 ) R (2.0 % + 0.0005 ) R (0.1 % + 0.0005 ) R 1000 M minimum (0.2 % + 0.0005 ) R (0.1 % + 0.0005 ) R (0.1 % + 0.0005 ) R (2.0 % + 0.0005 ) R 95 % coverage (1.0 % + 0.0005 ) R Document Number: 30283 2 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000