124
SAK-series
SAK-series
SAK-series
125
Weidmüller terminal - SAK-series- are pro-
ved in millions of applications for more
than 50 years.
Available for the two rail systems TS32
and TS35, the SAK terminals are useable
for every application and for all cross-sec-
tions. SAK terminals fulfill the requirements
of EN 60 947-7-1.
Thermosetting plastic or
Thermoplastic
Terminal of thermosetting plastic are nor-
mally used in applications where high con-
tinuous service temperature and high
flammability level are necessary. The
Weidmüller thermosetting plastic KRG is
very resistant against infection through
mould and micro-organisms.
The thermoplastic material Polyamide 66
has very good electrical and mechanical
properties upto 100°C. PA66 is flexible
and unsusceptible to fracture, even with
low temperatures.
Polyamid 66 has improved fire resistance
and is self-extinguishing with flammability
level V2 according to UL 94.
Cross-connection systems
40% of all terminals are cross-connected
for potential branching.
Weidmüller distinguishes between the fol-
lowing cross-connection units for SAK-
series:
•type Q pre-assembled cross-connec-
tions
•type QL permanent cross-connections
•type VL removeable cross-connection
straps
•type QS removeable cross-connection
plugs
Cross-connection systems from the SAK
and AKZ series, type Q, QL or VL or other
freely accessible live components, must be
protected with appropriate covers ADP 1
or 4 or TSK 31.5 as long as they are to be
inserted safe from contact.
Approvals
The following approvals apply to SAK ter-
minals:
aUL-USA
r CSA-Canada
#GOST-Russia
qSEV-Switzerland
iKEMA-Netherlands
LR Lloyds Register of Shipping
u Germanischer Lloyd
DNV Det Norske Veritas
SAK portfolio
•Feed-through terminals
•Protective conductor terminals
•Fuse terminals
•Disconnect-test terminals
•Feed-through terminals with tab, solder,
WireWrap and Termi Point connections
•Initiator terminals, Actuator terminals
•Stud terminals
Accessories
An extensive assortment of accessories is
available for Weidmüller SAK terminals:
•Partitions
•Cover plates
•Small partitions
•Test plugs
•Test adapters
•Marking material
•Cross-connections and
•Covers
TS 32
Thermosetting
plastic
Thermoplastic
TS 35
Positioning of end plates or partitions between cross-connections
Operating voltage Terminal width (in mm)
363 810 121822
125 V ~ AP –––––
250 V ~ AP –––––
380 V ~ AP AP ––––
440 V ~ TW AP AP AP AP –
500 V ~ TW TW AP AP AP –
660 V ~ TW TW TW TW TW AP
750 V ~ TW TW TW TW TW AP
In PA terminals small partitions (TSch) have to be used up to 380 V.
126
Feed-through terminals
Mounting rails, end brackets, further marking material see “Accessories”
1) Contact-proof with ADP 4 cover profile (see section “Accessories”) 3) Cat. No. 0279660000, 0279680000, 0380460000
2) Not suitable for SST 3 safety pin and 0380480000, 41 A for 6 mm2
WWW
Y
Y
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole A
Continuous current rating of cross-connection 6…10-pole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
KrG
Blue KrG
KrS
PA
Blue PA
Orange PA
Terminal block with marking PA
Terminal block without marking PA
End plate (thickness mm)
KrG
Blue KrG
KrS
PA
Blue PA
PA
Blue PA
Partition (thickness mm)
TW WTW KrG
Blue KrG
KrS
PA
Blue PA
HP
Small partition
TSch 1
Cross-connection
Q 4 2-pole
3-pole
4-pole
10-pole
Cover plates
Switchable cross-connection link
VL 2 BS VH
Marking tags Print
DEK Standard
SAKD 2.5 N
SAKD 2.5/10/35 SAK 2.5/35
SAK 2.5/10/35 SAK 4/35
SAK 4/10/35
SAK 2.5
SAK 2.5/10
a r # LR u
5/32.5/43.5
5/44/38
10/M 2.5/3.5 x 0.6
500 V/24 A/2.5 mm2
6 kV/3
0.4…0.6
1
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A 2
30 A/4 mm2
24
24
300 V/20 A/28…12 AWG
300 V/20 A/22…12 AWG
YQty. WQty.
0215560000100 0268860000100
0215580000100 026888000010 0
0401060000 10 0523160000 10
0401160000 10
Type Cat. No. Qty.
AP (1.5) 0150960000 20
AP (1.5) 0150980000 20
TW (1.5) 0191860000 20
TW (1.5) 0191880000 20
TW (1.5) 0307500000 20
TSch 3 0366860000 100
Q 2 0367800000 50
Q 3 0367900000 50
Q 4 0368000000 50
Q 10 0368100000 20
DEK5 see “Accessories”
a r i#LR u
6/45/40
10/M 2.5/3.5 x 0.6
800 V/24 A/2.5 mm2
8 kV/3
0.4…0.6
1
0.5…6
0.5…2.5
0.5…4
0.5…2.5/43)
A 3
32 A/4 mm2
32
600 V/20 A/22…12 AWG
600 V/25 A/26…10 AWG
WCat. No. Qty.
0380420000 100
0380470000 100
03804600001)100
03804800001)100
04994600001)10
04995600001)10
Type Cat. No. Qty.
AP (1.5) 0279520000 20
AP (1.5) 0279570000 20
AP (1.5) 0279530000 20
AP (1.5) 0460560000 20
AP (1.5) 0460580000 20
TW (2.5) 0302820000 20
TW (2.5) 0302870000 20
TW (2.5) 0302830000 20
TW (1.5) 0302860000 20
TW (1.5) 0302880000 20
TW (1.0) 0297100000 20
TSch 1 0319160000 100
Q 2 0337000000 50
Q 3 0337100000 50
Q 4 0337200000 50
Q 10 0368700000 20
AD 4 0303400000 50
BSKM3x22 0128900000 100
DEK 6 see “Accessories”
a r i#LR u DNV
6/36.5/46.5
10/M 2.5/3.5 x 0.6
800 V/24 A/2.5 mm2 3)
8 kV/3
0.4…0.6
1
0.5…6
0.5…2.5
0.5…4
0.5…2.5/43)
A 3
32 A/4 mm2
32
600 V/20 A/22…12 AWG
600 V/25 A/26…10 AWG
YCat. No. Qty.
0279620000 100
0279670000 100
0279630000 100
02796600001)2)100
02796800001)2)100
13263600001)2)100
03225600001)2)10
03228600001)2)10
Type Cat. No. Qty.
AP (1.5) 0279520000 20
AP (1.5) 0279570000 20
AP (1.5) 0279530000 20
AP (1.5) 0279560000 20
AP (1.5) 0279580000 20
TW (2.5) 0302820000 20
TW (2.5) 0302870000 20
TW (2.5) 0302830000 20
TW (1.5) 0302860000 20
TW (1.5) 0302880000 20
TW (1.0) 0297100000 20
TSch 1 0319160000 100
Q 2 0337000000 50
Q 3 0337100000 50
Q 4 0337200000 50
Q 10 0368700000 20
AD 4 0303400000 50
BSKM3x220128900000 100
DEK6 see “Accessories”
a r i#
6.5/40/51.5
6.5/45/44
12/M 3/3.5 x 0.6
800 V/32 A/4 mm2
8 kV/3
0.5…1.0
2
0.5…6
0.5…4
0.5…4
0.5…4
A 4
41 A/6 mm2
36
600 V/20 A/22…12 AWG
600 V/36 A/26…10 AWG
WCat. No. Qty.
0443620000 100
0443670000 100
04436600001)100
04436800001)100
13236600001)100
05304600001)10
05303600001)10
Type Cat. No. Qty.
AP (1.5) 0117920000 20
AP (1.5) 0117970000 20
AP (1.5) 0117930000 20
AP (1.5) 0117960000 20
AP (1.5) 0117980000 20
TW (2.5) 0130120000 20
TW (2.5) 0103170000 20
TW (2.5) 0130130000 20
TW (1.5) 0130160000 20
TW (1.5) 0130180000 20
TW (1.0) 0197100000 20
TSch 1 0319160000 100
Q 2 0336700000 50
Q 3 0336800000 50
Q 4 0336900000 50
Q 10 0368800000 20
AD 4 0285300000 50
BSKM3x220128900000 100
VL 2 0197000000 100
VH 0285100000 50
BS 0292500000 100
DEK6.5 see “Accessories”
Feed-through terminals
SAK-series
127
Y
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
With/without plastic insulating collar mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole A
Continuous current rating of cross-connection 6…10-pole A
Technical data
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
KrG
Blue KrG
KrS
PA
Blue PA
Orange PA
Terminal block with marking PA
Terminal block without marking PA
End plate (thickness mm)
KrG
Blue KrG
KrS
PA
Blue PA
PA
Blue PA
Partition (thickness mm)
TW WTW KrG
Blue KrG
KrS
PA
Blue PA
HP
Small partition
TSch 6
Cross-connection
Q 4 QB 4 2-pole
3-pole
4-pole
10-pole
2-pole
3-pole
4-pole
Switchable cross-connection link
VL 2 BS VH
Marking tags Print
DEK Standard
* Accepts LS 2.8 shield lugs Cat. No. 1056400000
** 2.5 mm2conductor connection when using QB
Mounting rails, end brackets, further marking material see “Accessories”
1) Contact-proof cross-connec. with ADP 4 over profile (see “Accessories”)
2) Not suitable for fuse pin SST 3
YW
a r i # LR uDNV
6.5/40/51.5
800 V/32 A/4 mm2
8 kV/3
0.5…1.0
2
0.5…6
0.5…4
0.5…4
0.5…4
A 4
41 A/6 mm2
36
600 V/20 A/22…12 AWG
600 V/36 A/26…10 AWG
YCat. No. Qty.
0128320000 100
0128370000 100
0128330000 100
01283600001)2)100
01283800001)2)100
01050600001)2)100
03226600001)2)10
03088600001)2)10
Type Cat. No. Qty.
AP (1.5) 0117920000 20
AP (1.5) 0117970000 20
AP (1.5) 0117930000 20
AP (1.5) 0117960000 20
AP (1.5) 0117980000 20
TW (2.5) 0130120000 20
TW (2.5) 0103170000 20
TW (2.5) 0130130000 20
TW (1.5) 0130160000 20
TW (1.5) 0130180000 20
TW (1.0) 0197100000 20
TSch 1 0319160000 100
Q 2 0336700000 50
Q 3 0336800000 50
Q 4 0336900000 50
Q 10 0368800000 20
VL 2 0197000000 100
VH 0285100000 50
BS 0292500000 100
DEK6.5 see “Accessories”
a r #
6/54/60
6/54/60.5
9
/M 3/3.5 x 0.6
500 V/2 x 32 A/4 mm2
6 kV/3
0.5…1.0
2
0.5…4
0.5…4
0.5…4
0.5…4
A 3
32
A/4 mm2
32
32
300 V/27 A/22…12 AWG
300 V/10 A/26…12 AWG
YQty. WQty.
0590060000*
1
)100 0590160000
1
)100
0590080000*
1
)100 0590180000
1
)100
1323860000*1)10
Type Cat. No. Qty.
AP (1.5) 1397160000 20
AP (1.5) 1397180000 20
WTW (Ex) 1058800000 20
TSch 6 0190260000 100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
QB 2 0482700000**100
QB 3 0482800000** 50
QB 4 0482900000** 50
VL 2 0446700000 50
VH 1056500000 100
BS 0343100000 100
DEK6
see “Accessories”
a r #
6/54/60
6/54/60.5
9
/M 3/3.5 x 0.6
500 V/2 x 32 A/4 mm2
6 kV/3
0.5…1.0
2
0.5…4
0.5…4
0.5…4
0.5…4
A 3
32
A/4 mm2
32
32
300 V/27 A/22…12 AWG
300 V/10 A/26…12 AWG
YQty. WQty.
0355460000100 0527660000100
0355480000100 0527680000100
Type Cat. No. Qty.
AP (1.5) 1397160000 20
AP (1.5) 1397180000 20
WTW (Ex) 1058800000 20
TSch 6 0190260000 100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
QB 2 0482700000**100
QB 3 0482800000** 50
QB 4 0482900000** 50
VL 2 0446700000 50
VH 1056500000 100
BS 0343100000 100
DEK6
see “Accessories”
DK 4 Q*
DKB4 Q*/10*
SAK 4
SAK 4/10 DK 4
DK4/35
Y
W
128
Feed-through terminals
Mounting rails, end brackets, further marking material see “Accessories”
* Accepts LS 2.8 shield lugs Cat. No.1056400000
** 2.5 mm2conductor connection when using QB
Y
SAK 6 N
SAK 6/10/35 SAK 10
SAK 10/10/35 SAK 16
SAK 16/35
DK4 QV*
DK4 QV/35*
WY
WY
WY
W
a r #
6/54/60
6/54/60.5
9 mm/M 3/3.5 x 0.6
500 V/32 A/4 mm2
6 kV/3
0.5…1.0
2
0.5…4
0.5…4
0.5…4
0.5…4
A 3
32 A/4 mm2
32
32
300 V/27 A/22…12 AWG
300 V/10 A/26…12 AWG
YQty. WQty.
0590260000*
1
)1000363660000*
1
)100
0590280000*
1
)1000363680000*
1
)100
Type Cat. No. Qty.
AP (1.5) 1397160000 20
AP (1.5) 1397180000 20
WTW (Ex) 1058800000 20
TW (2.0) 0607000000 20
TSch 6 0190260000 100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
QB 2 0482700000** 100
QB 3 0482800000** 50
QB 4 0482900000** 50
AD 4 0303400000 50
BSK M 2.5 x18
0303300000 100
VL 2 04467000000 50
VH 10565000000 100
BS 03431000000 100
DEK6 see “Accessories”
a r i#LR u DNV
8/40/51.5
8/45/44
12 mm/M 3.5/4.0 x 0.8
800 V/41 A/6 mm2
8 kV/3
0.8…1.6
3
0.5…10
0.5…6
0.5…10
0.5…6
A 5
41
600 V/40 A/22…8 AWG
600 V/47 A/20…8 AWG
YQty. WQty.
0193220000100 0380520000100
0380570000100
0193230000100
01932600001)100 03805600001)100
01932800001)10 0 03805800001)100
0322760000
1
)10
0308960000
1
)10
Type Cat. No. Qty.
AP (1.5) 0117920000 20
AP (1.5) 0117970000 20
AP (1.5) 0117930000 20
AP (1.5) 0117960000 20
AP (1.5) 0117980000 20
TW (1.5) 0130120000 20
TW (1.5) 0130130000 20
TW (1.5) 0130160000 20
TW (1.5) 0130180000 20
TW (1.5) 0197100000 20
TSch 1 0319160000 100
Q 2 0456700000 50
Q 3 0456800000 50
Q 4 0456900000 50
Q 10 0457000000 20
AD 4 0196600000 50
BSKM3x22 0128900000 100
VL 2 0194700000 50
VH 0285100000 50
BS 0292500000 100
DEK 8 see “Accessories”
a r i#LR u DNV
10/40/51.5
10/45/44
12 mm/M 4/5.5 x 1.0
800 V/57 A/10 mm2
8 kV/3
1.2...2.03)
4
1.5…10
2.5…16
1.5…10
1.5…10
B 6
76 A/16 mm2
57
600 V/60 A/14…6 AWG3)
600 V/65 A/14…6 AWG3)
YQty. WQty.
0110020000 100 0443720000 100
0110070000 100 0443770000 100
0110030000 100
0110060000
1
)100 0443760000
1)
100
0110080000
1
)100 0443780000
1)
100
0553860000
1
) 10
0353160000
1
) 10
Type Cat. No. Qty.
AP (1.5) 0117920000 20
AP (1.5) 0117970000 20
AP (1.5) 0117930000 20
AP (1.5) 0117960000 20
AP (1.5) 0117980000 20
TW (1.5) 0130120000 20
TW (1.5) 0130170000 20
TW (1.5) 0130130000 20
TW (1.5) 0130160000 20
TW (1.5) 0130180000 20
TW (1.5) 0197100000 20
TSch 1 0319160000 100
Q 2 0457100000 50
Q 3 0457200000 50
Q 4 0457300000 50
Q 10 0457400000 20
AD 4 0178600000 50
BSKM3x22 0128900000 100
VL 2 0135900000 50
VH 0285100000 50
BS 0292500000 100
DEK 5 see “Accessories”
a r i#LR u DNV
12/50/57.5
12/50/50
15 mm/M 4/5.5 x 1.0
1000 V/76 A/16 mm2
8 kV/3
1.2…2.4
4
2.5…10
4…162)
4…16
4…16
B 6
76
600 V/80 A/12…4 AWG
600 V/87 A/10…4 AWG
YQty. WQty.
0271020000 50 0380620000 50
0271030000 50
02710600001)50 03806600001)50
02710800001)50 03806800001)50
Type Cat No. Qty.
AP (3.0) 0271120000 20
AP (3.0) 0271130000 20
AP (1.5) 0271160000 20
AP (1.5) 0271180000 20
TW (3.0) 0281120000 20
TW (3.0) 0281130000 20
TW (1.5) 0303660000 10
TW (1.5) 0303680000 10
TW (2.0) 0607000000 20
TSch 1 0319160000 100
Q 2 0457500000 50
Q 3 0457600000 50
Q 4 0457700000 50
Q 10 0457800000 20
AD 4 0518200000 50
BSKM3x22 0128900000 100
VL 2 0135800000 50
VH 0285100000 50
BS 0292500000 100
DEK5 see “Accessories”
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
With/without plastic insulating collar mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole A
Continuous current rating of cross-connection 6…10-pole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
KrG
Blue KrG
KrS
PA
Blue PA
Orange PA
Terminal block with marking
Terminal block without marking
End plate (thickness mm)
AP KrG
Blue KrG
KrS
PA
Blue PA
Partition (thickness mm)
TW WTW Small partition KrG
Blue KrG
KrS
PA
Blue PA
TSch 6
Cross-connection
Q 4 QB 4 2-pole
3-pole
4-pole
10-pole
Cover
Switchable cross-connection link
VL 2 BS VH
Marking tags Print
DEK Standard
1) Contact-proof with ADP 4 cover 2) Tightening torque for 16 mm23
)
Tightening torque for
16 mm2
profile (see section “Accessories”) stranded: 2 Nm and AWG6: 2 Nm
Feed-through terminals
SAK-series
129
a r # u DNV
16/58/67.5
16/63/60
18 mm/M 6/6.5 x 1.2
1000 V/125 A/35 mm2
8 kV/3
4.0…5.0/4.0…6.0***
2.5…16
2.5…50
2.5…35
2.5…35
B 8
125 A/35 mm2
65
65
600 V/100 A/12…2 AWG
600 V/120 A/12…2 AWG
YQty. WQty.
0550620000 20 0608220000 20
0555720000 20 0608320000 20
060837000020
0550630000 20
0555730000 20
0550660000 20 0608260000 20
0555760000 20 0608360000 20
Type Cat. No. Qty.
AP (3.0) 0303620000 10
AP (3.0) 0303670000 10
AP (3.0) 0303630000 10
AP (1.5) 0303660000 10
AP (3.0) 0303680000 10
TW (3.0) 0304320000 10
TW (3.0) 0304330000 10
TW (1.5) 0304360000 10
QL 2 0564900000 50
QL 3 0565000000 50
QL 4 0565100000 50
QL 10 0565200000 20
VH 17 0267000000 50
BS M 4x30 0267100000 50
SS M 4 0136400000100
AD 4 0576700000 50
BSKM 4x32 0129100000 50
PS 4 0299600000 20
DEK 5 see “Accessories”
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole A
Continuous current rating of cross-connection 6…10-pole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
KrG
Hexagon socket KrG
Hexagon socket Blue KrG
KrS
Hexagon socket KrS
PA
Hexagon socket PA
Blue PA
End plate (thickness mm)
KrG
Blue KrG
KrS
PA
Blue PA
Orange PA
Partition (thickness mm)
KrG
Blue KrG
KrS
PA
Blue PA
Cross-connection
QL 3 VH BS SS 2-pole
3-pole
4-pole
10-pole
Switchable cross-connection link
VL 2 BS VH
Cover / test plug
PS 4
Marking tags Print
DEK Standard
a r i#LR u DNV
18/58/67.5
18/58/60
20 mm/M 6/6.5 x 1.2
800 V/125 A/35 mm2
8 kV/3
4.0…5.0/4.0…6.0***
6…16
16…50
10…35
10…35
B 9
125 A/35 mm2
99
99
600 V/100 A/6…2 AWG
600 V/145 A/6…2 AWG
YQty. WQty.
0303520000 20
0476520000 20
0303530000 20
0303560000 20 0380760000 20
0476560000 20 0582460000 20
0303580000 20 0380780000 20
Type Cat. No. Qty.
AP (3.0) 0303620000 10
AP (3.0) 0303670000 10
AP (3.0) 0303630000 10
AP (1.5) 0303660000 10
AP (3.0) 0303680000 10
TW (3.0) 0304320000 10
TW (3.0) 0304330000 10
TW (1.5) 0304360000 10
QL 2 0123600000 20
QL 3 0123700000 20
QL 4 0123800000 20
QL 10 0338600000 20
VH 17 0267000000 50
BS M 4x30 0267100000 50
SS M 4 0136400000100
VL 2 0124000000 50
VH 24.5 0298700000 50
BS M 4x35 0298900000 50
AD 4 0178700000 20
BSK M 4x32 0129100000 50
PS 4 0299600000 20
DEK 5 see “Accessories”
a r # DNV
28/83.5/100.5
28/83.5/96.5
30 mm/M 10/S 8 D6911
1000 V/232 A/95 mm2
8 kV/3
10.0…20.0
Strips
10…16 3x9x0.8
10…120 2)6x9x0.8
10…95 2)6x13x0.5
10…35 6x16x0.8
B 12
232 A/95 mm2
180
600 V/190 A/6…3/0 AWG
600 V/260 A/6…3/0 AWG
YQty. WQty.
0550520000 10 0662220000 10
Type Cat. No. Qty.
AP (3.0) 0550920000 10
AP (3.0) 0550970000 10
QL 2 0551200000 10
QL 3 0407600000 10
QL 4 0407700000 10
VH 35 0551100000 10
BS M 5x50 0630200000 20
ADP 3 0485400000 20
PS 4 0299600000 20
DEK 5 see “Accessories”
a r # LR u DNV
22/75/79.5
22/75/87
24 mm/M 8/S 6 D911
1000 V/192 A/70 mm2
8 kV/3
6.0…12.0
Strips
16 3x9x0.8
16…70 1)6x9x0.8
16…70 1)6x13x0.5
16…35
B 11
192 A/70 mm2
180
600 V/145 A/4…2/0 AWG
600 V/150 A/4…2/0 AWG
YVPEW Qty.
0340820000 10
0340870000 10
0340830000 10
013916000010
Type Cat. No. Qty.
AP (4.0) 0340920000 10
AP (4.0) 0340930000 10
AP (2.0) 0340960000 10
QL 2 0345300000 20
QL 3 0167000000 20
VH 30.5 0345500000 20
BS M 5x45 0345600000 20
SS M 5 0346100000100
AD 3 0344300000 10
BSKM 5x45 0344400000 50
PS 4 0299600000 20
DEK 5 see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
*** For hexagon socket 1)12 Nm for 70 mm2
2)20 Nm for 95 mm2and 120 mm2
Y
YYY
WWWW
SAK 35 N
SAK 35 N/35 SAK 35
SAK 35/35 SAK 95
SAK 95/35
SAK 70
SAK 70/35
130
Feed-through terminals (spring-loaded)
11/77/72.5
12 mm
500/41 A
6
6 kV/3
0.75...16
0.75...10
YQty. YQty.
0623320000*200623120000**20
Type Cat. No. Qty.
AP (3.0) 0301420000 10
QL 2 0267400000 50
QL 3 0267500000 50
QL 4 0267600000 50
QL 10 0341700000 20
BS M 4x6 0149700000 100
SB 14 0135300000100
BST 1 3878060000 20
PS 4 0299600000 20
StB 17 0147100000 50
r
8/50/60
8/50/53
12 mm
630 V/32 A
4
6 kV/3
0.5…1.0
2
0.5…4
0.5…4
YQty. WQty.
0497560000 50 9501160000 50
0497520000 50
Type Cat. No. Qty.
AP (3) 0270460000 10
TW (1.5) 3877960000 10
TW (2) 3833500000 20
TW (0.5) 0474700000 20
TSch 1 0319160000100
QL 2 0194300000 50
QL 3 0194400000 50
QL 4 0194500000 50
QL 10 0338300000 10
VH 13.5 0248500000100
BS M 3x20 0303000000 100
VH 2 0194700000 50
VH 21 0309600000100
BS M 3x20 0296200000 50
SS 0164400000 50
PS 2.3 0180400000 50
StB 14 0168600000 50
ADP 2 0485300000 1
DEK see “Accessories”
a r
11/50/60
12 mm
500 V/57 A
10
6 kV /3
0.5…10
0.5…10
YQty. WQty.
0270320000 50
Type Cat. No. Qty.
AP (3) 0270420000 10
TW (2) 3833500000 20
TW (0.5) 0474700000 20
QL 2 0194300000 50
QL 3 0194400000 50
QL 4 0194500000 50
QL 10 0338300000 10
VH 17.5 0285200000 50
BS M 3x25 0292500000 100
SS 0164400000 50
QS 4 0369760000 10
VH 2 0528400000 50
VH 27 0309400000 50
BS M 3x25 0309800000 50
SS 0164400000 50
PS 2.4 0299600000 20
StB 18 0286500000 20
ADP 2 0485300000 1
DEK see “Accessories”
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/-current
Rated cross-section mm2
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
PA
KrG
End plate/partition/small partition
AP TW TSch 1 PA
KrG
PA
HP
HP
PA
Cross-connection
QL VH SS 2-pole
3-pole
4-pole
10-pole
BS M 3 x ...
Switchable cross-connection link
VH 21
Dummy plug
made from plastic,
to keep the place of an
extracted plug
Test plug/socket
PS
StB Plug-testsocket (QL cannot be used)
Cover plate
Marking tags Print
Standard
YY
RSF 3
RSF 3/35 RSF 1
* with disconnector (73 mm height)
** Disconnector with handle (86 mm height)
Y
RSF 2
Disconnect test terminal
II. Symbols
Thermocouples according to IEC 584
DIN 43710
Busbar material
Terminal trade name
a) Type J
Fe Iron
(positive leg)
CuNi Constantan
(negative leg)
b) Type T
Cu Copper
(positive leg)
CuNi Constantan
(negative leg)
c) Type K
NiCr Chromel
(positive leg)
Ni Alumel
(negative leg)
Feed-through terminals for thermocouples
SAK-series
131
Busbars made from thermocouple materials
according to DIN IEC 584
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Technical data/VDE
Rated voltage/current/cross-section
Tightening torque range Nm
Ordering data Version Type
NiCr
Ni
CuNi
Fe
Cu
NiCr/Ni K
Cu/CuNi T
Fe/CuNi J
End plate (thickness mm)
KrG
Blue KrG
KrS
PA
Blue PA
Orange PA
Partition (thickness mm)
KrG
Blue KrG
KrS
PA
WEM
for TS 32 HP
Marking tags Print
DEK Standard
Weidmüller’s thermocouple-treminals
are specially designed for transmitting the
smallest voltages in temperature measu-
ring circuits. Special busbars ensure that
no false signals occur in the terminal when
temperature differences exist in the positi-
ve and negative path.
This high measuring precision is necessary
for, e.g. test beds, air craft engines, for
complicated chemical processes, controls,
etc.
I. Configuration of a
temperature measuring circuit
1 Thermocouple (sensor) 4 Reference point
2 Thermocouple terminals 5 Supply conductors (to and from)
3 Compensation conductor 6 Measuring device
The thermocouple terminals displayed in
this measurement circuit are used to ther-
moelectrically transmit thermal e.m.f. of
the thermocouple to the reference point
and indicating device via the thermo-
couple.
6/36.5/49.5
10 mm/M 2.5/3.5 x 0.6
–/–/2.5 mm2
0.4…0.6
YCat. No. Qty.
0107260000100
0107160000100
0189860000100
0190060000100
0189960000100
Type Cat. No. Qty.
AP (1.5) 0279560000 20
TW (1.5) 0302860000 20
DEK 6 see “Accessories”
6/54/59.5
6/54/60.5
9 mm/M 3/3.5 x 0.6
–/–/4 mm2
0.5…1
WY Qty.
1284160000 1338260000 100
1285660000 1338160000 100
1284060000 1338060000 100
Type Cat. No. Qty.
AP (1.5) 1397160000 20
WTW (Ex)e 1058800000 20
TW HP (2.0) 0607000000 20
DEK 6 see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
Y
Y
W
SAK 2.5 TC DK 4 Q/TC
132
Feed-through terminals
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole A
Continuous current rating of cross-connection 6…10-pole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Type
KrG
End plate, hard paper
0205100000
0205200000 tropic-proof
0180700000, 0205300000
0180800000, 0205400000
tropic-proof
Partition, hard paper (thickness in mm)
0151400000
0164600000 tropic-proof
0177100000 B/L/H (incl. TS 32) mm
0179900000 B/L/H (incl. TS 35) mm
Cross-connection
2-pole
3-pole
4-pole
Cover
Marking tags Print
DEK Standard
Terminals/Accessories SAKG 28 I SAKG 28 II
The Weidmüller SAKG range offers the fol-
lowing connection variants:
•clamping yoke/flat lug as a combination,
Version I.
•flat lug, Version II.
Two types of threading are provided
here.
a) screw set with lock nut
b) with thread in busbar
•clamping yoke connection, Version III.
The stripped conductor can be connec-
ted without further preparation.
Versions
Version I Version II
without thread
Version II G Version III
with thread
Cables with cable lugs are connected to
SAKG terminals of Version I and to SS
stud terminals.
Fitting instructions for SAKG terminals
When tightening the clamping screw, it is
recommended that the conductor be held
against the direction of tightening to pre-
vent deformation of the mounting rail and
so as not to place the terminal foot under
undue torsional forces.
Cover
To ensure shock protection following
connections of conductors, AH covers
can be clipped onto the terminal.
a r # u
28/70/63.5
15 mm/M 6/–
1000 V*/125 A/35 mm2
8 kV/3
3…6
6…35
6…35
10…35
6…35
B 9
125 A/35 mm2
(QL 2) 125
600 V/95 A/2 AWG
600 V/110 A/6…1 AWG
YCat. No. Qty.
0170020000 10
YCat. No. Qty.
EP 1 (2) 0205100000 10
EP 1 (2) 0205200000 10
WCat. No. Qty.
YQty.
TW 1 (2) 0151400000 10
TW 1 (2) 0164600000 10
2/120/75.5
QL 2 0193900000 5
QL 3 0407600000 5
QL 4 0407700000 5
AH 28 0326660000 5
DEK 5 see “Accessories”
a r # u DNV
28/70/53
–/M 6/–
1000 V*/125 A/35 mm2
8 kV/3
3…6
125 A/35 mm2
(QL 2) 125
600 V/115 A/2 AWG
600 V/110 A/6…1 AWG
YCat. No. Qty.
0170320000 10
YCat. No. Qty.
EP 1 (2) 0205100000 10
EP 1 (2) 0205200000 10
WCat. No. Qty.
YQty.
TW 1 (2) 0151400000 10
TW 1 (2) 0164600000 10
2/120/75.5
QL 2 0193900000 5
QL 3 0407600000 5
QL 4 0407700000 5
AH 28 0326660000 5
DEK 5 see “Accessories”
YY
During conductor connection, observe clearance and creepage distances. Insert partitions if necessary.
Mounting rails, end brackets, further marking material see “Accessories”
Feed-through terminals
SAK-series
133
a r # u
32/87/84
32/87/84.5
26 mm/M 8/-
1000 V*/150 A/50 mm2
8 kV/3
6…12
10…70
10…70
10…70
10…35
B 11
150 A/50 mm2
(QL 2) 150
600 V/165 A/3 AWG
600 V/170 A/1…2/0 AWG
YQty. WQty.
0286620000 0637120000 10
YCat. No. Qty.
EP 1 (2) 0205300000 10
EP 1 (2) 0205400000 10
WCat. No. Qty.
EP 2/35 (2) 0180700000 10
EP 2/35 (2) 0180800000 10
Y + W Qty.
TW 2 (2) 0177100000 10
TW 2 (2) 0179900000 10
2/160/90.5
2/160/90.5
QL 2 0194000000 5
QL 3 0441500000 5
QL 4 0441600000 5
AH 32 0326760000 5
DEK 5 see “Accessories”
a r # u
32/80/53
32/80/51
-/M 8/-
1000 V*/150 A/50 mm2
8 kV/3
6…12
150 A/50 mm2
(QL 2) 150
600 V/200 A/3 AWG
600 V/170 A/1…2/0 AWG
YQty. WQty.
0170420000 10 063732000010
YCat. No. Qty.
EP 1 (2) 0205100000 10
EP 1 (2) 0205200000 10
WCat. No. Qty.
EP 1/35 (2) 0180700000 10
EP 1/35 (2) 0180600000 10
Y + W Qty.
TW 1 (2) 0151400000 10
TW 1 (2) 0164600000 10
2/120**/75.5
2/120**/75.5
QL 2 0194000000 5
QL 3 0441500000 5
QL 4 0441600000 5
AH 32 0326760000 5
DEK 5 see “Accessories”
r # u
28/70/53
-/M 6/-
1000 V*/125 A/35 mm2
8 kV/3
3…6
125 A/35 mm2
(QL 2) 125
600 V/110 A/6…1 AWG
YCat. No. Qty.
0185020000 10
YCat. No. Qty.
EP 1 (2) 0205100000 10
EP 1 (2) 0205200000 10
WCat. No. Qty.
YQty.
TW 1 (2) 0151400000 10
TW 1 (2) 0164600000 10
2/120/75.5
QL 2 0193900000 5
QL 3 0407600000 5
QL 4 0407700000 5
AH 28 0326660000 5
DEK 5 see “Accessories”
a r # u
28/70/63.5
15 mm/M 6/-
1000 V*/125 A/35 mm2
8 kV/3
3…6
6…35
6…35
10…35
6…35
B 9
600 V/95 A/2 AWG
600 V/135 A/8…2 AWG
YCat. No. Qty.
0170820000 10
YCat. No. Qty.
EP 1 (2) 0205100000 10
EP 1 (2) 0205200000 10
WCat. No. Qty.
YQty.
TW 1 (2) 0151400000 10
TW 1 (2) 0164600000 10
2/120/75.5
AH 28 0326660000 5
DEK 5 see “Accessories”
* During conductor connection, observe clearance and creepage distances. Insert partitions if nececssary
** For Cat. No. 0180600000 and 0180700000: length = 160 mm.
YYYY
a r # u
32/94/84
32/94/84.5
26 mm/M 8/-
1000 V*/150 A/50 mm2
8 kV/3
6…12
10…70
10…70
10…70
10…35
B 11
150 A/50 mm2
600 V/165 A/3 AWG
600 V/185 A/1…2/0 AWG
YQty. WQty.
0286720000 10 0637220000 10
YCat. No. Qty.
EP 2 (2) 0205300000 10
EP 2 (2) 0205400000 10
WCat. No. Qty.
EP 2/35 (2) 0180700000 10
EP 2/35 (2) 0180800000 10
Y + W Qty.
TW 2 (2) 0177100000 10
TW 2 (2) 0179900000 10
2/160/90.5
2/160/90.5
AH 32 0326760000 5
DEK 5 see “Accessories”
YY
r # u DNV
32/80/53
32/80/53
-/M 8/-
1000 V*/150 A/50 mm2
8 kV/3
6…12
150 A/50 mm2
(QL 2) 150
600 V/170 A/1…2/0 AWG
YQty. WQty.
0185120000 10 0637420000 10
YCat. No. Qty.
EP 1 (2) 0205100000 10
EP 1 (2) 0205200000 10
WCat. No. Qty.
EP 1/35 (2) 0180700000 10
EP 1/35 (2) 0180600000 10
Y + W Qty.
TW 1 (2) 0151400000 10
TW 1 (2) 0164600000 10
2/120**/75.5
2/120**/75.5
QL 2 0194000000 5
QL 3 0441500000 5
QL 4 0441600000 5
AH 32 0326760000 5
DEK 5 see “Accessories”
WW WW
SAKG 28 II G SAKG 28 III SAKG 32 I
SAKG 32/35 I SAKG 32 II
SAKG 32/35 II SAKG 32 II G
SAKG 32/35 II G SAKG 32 III
SAKG 32/35 III
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole A
Continuous current rating of cross-connection 6…10-pole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
KrG
End plate, hard paper (thickness mm)
0205100000, 0180500000
0205200000, 0180600000 tropic-proof
0180700000, 0205300000
0180800000, 0205400000
tropic-proof
Partition, hard paper (thickness mm)
0151400000
0164600000 tropic-proof
0177100000 B/L/H (incl. TS 32) mm
0179900000 B/L/H (incl. TS 35) mm
Cross-connection
2-pole, QL 2
3-pole, QL 3
4-pole, QL 4
Cover
Marking tags Print
DEK Standard
134
Feed-through terminals
r # u DNV
32/84/54
32/84/53
–/M 8/–
1000 V*/192 A/70 mm2
8 kV/3
6…12
192 A/90 mm2
(QL 2) 192
600 V/200 A/2/0…4/0 AWG
YQty. WQty.
015042000010 063662000010
YCat. No. Qty.
EP 1 (2) 0205100000 10
EP 1 (2) 0205200000 10
WCat. No. Qty.
EP 1/35 (2) 0180500000 10
EP 1/35 (2) 0180600000 10
Y+W Qty.
TW 1 (2) 0151400000 10
TW 1 (2) 0164600000 10
2/120/75.5
2/120/75.5
Y+W Qty.
0194000000 10
0441500000 10
0441600000 10
AH 32 0326760000 5
DEK 5 see “Accessories”
a r # u
40/95/84
46/95/85.5
27 mm/M 10/–
1000 V*/232 A/95 mm2
8 kV/3
10...20
10…95
10…95
10…95
10…35
B 12
232 A/95 mm2
(QL 2) 232
600 V/195 A/4/0 AWG
600 V/250 A/2/0…4/0AWG
YQty. WQty.
028682000010 0637520000 5
YCat. No. Qty.
EP 2 (2) 0205300000 10
EP 2 (2) 0205400000 10
WCat. No. Qty.
EP 2/35 (2) 0180700000 10
EP 2/35 (2) 0180800000 10
Y+W Qty.
TW 2 (2) 0177100000 10
TW 2 (2) 0179900000 10
2/160/90.5
2/160/90.5
YQty.WQty.
0194100000 10 0211400000 10
0263500000 10 0444900000 10
0409800000 10 0445000000 10
AH 40 0326860000 5
DEK 5 see “Accessories”
a r # u DNV
40/90/53
46/90/53
–/M 10/–
1000 V*/232 A/95 mm2
8 kV/3
10…20
232 A/95 mm2
(QL 2) 232
600 V/230 A/4/0 AWG
600 V/250 A/2/0…4/0 AWG
YQty. WQty.
017052000010 0637720000 5
YCat. No. Qty.
EP 2 (2) 0205300000 10
EP 2 (2) 0205400000 10
WCat. No. Qty.
EP 2/35 (2) 0180700000 10
EP 2/35 (2) 0180800000 10
Y+W Qty.
TW 2 (2) 0177100000 10
TW 2 (2) 0179900000 10
2/160/90.5
2/160/90.5
YQty. WQty.
019410000010 021140000010
026350000010 044490000010
0409800000 10 044500000010
AH 40 0326860000 5
DEK 5 see “Accessories”
r # u
40/90/55
46/90/55
–/M 10/–
1000 V*/232 A/95 mm2
8 kV/3
10…20
232 A/95 mm2
(QL 2) 232
600 V/230 A/4/0 AWG
600 V/250 A/2/0…4/0 AWG
YQty. WQty.
018522000010 0637820000 5
YCat. No. Qty.
EP 2 (2) 0205300000 10
EP 2 (2) 0205400000 10
WCat. No. Qty.
EP 2/35 (2) 0180700000 10
EP 2/35 (2) 0180800000 10
Y+W Qty.
TW 2 (2) 0177100000 10
TW 2 (2) 0179900000 10
2/160/90.5
2/160/90.5
YQty. WQty.
0194100000 10 0211400000 10
0263500000 10 0444900000 10
0409800000 10 0445000000 10
AH 40 0326860000 5
DEK 5 see “Accessories”
*During conductor connection, observe clearance and creepage distances. Insert partitions if necessary.
Mounting rails, end brackets, further marking material see “Accessories”
W
YW
Y
W
Y
W
SAKG 70 II G
SAKG 70/35 II G SAKG 40 I
SAKG 40/35 I SAKG 40 II
SAKG 40/35 II SAKG 40 II G
SAKG 40/35 II G
Feed-through terminals
SAK-series
135
r # u DNV
46/106/57.5
46/106/57
–/M 12/–
1000 V*/309 A/150 mm2
8 kV/3
14…31
309 A/150 mm2
(QL 2) 309
600 V/285 A/4/0 AWG
600 V/365 A/300 MCM
YQty. WQty.
0185320000 10 0638020000 5
YCat. No. Qty.
EP 2 (2) 0205300000 10
EP 2 (2) 0205400000 10
WCat. No. Qty.
EP 2/35 (2) 0180700000 10
EP 2/35 (2) 0180800000 10
Y+W Qty.
TW 2 (2) 0177100000 10
TW 2 (2) 0179900000 10
2/160/90.5
2/160/90.5
QL 2 0247000000 5
QL 3 0444400000 5
QL 4 0444500000 5
AH 46 0326960000 5
DEK 5 see “Accessories”
a r # u
54/122/57
54/122/57
–/M 16/–
1000 V*/415 A/240 mm2
8 kV/3
25…60
415 A/240 mm2
(QL 2) 415
600 V/380 A/500 MCM
600 V/600 A/300…500 MCM
YQty. WQty.
0170720000 10 0638120000 5
YCat. No. Qty.
EP 2 (2) 0205300000 10
EP 2 (2) 0205400000 10
WCat. No. Qty.
EP 2/35 (2) 0180700000 10
EP 2/35 (2) 0180800000 10
Y+W Qty.
TW 2 (2) 0177100000 10
TW 2 (2) 0179900000 10
2/160/90.5
2/160/90.5
QL 2 0264400000 5
QL 3 0408000000 5
QL 4 0247400000 5
DEK 5 see “Accessories”
a r # u
40/100/84
46/100/85.5
27 mm/M 10/–
1000 V*/232 A/95 mm2
8 kV/3
10…20
10…95
10…95
10…95
10…35
B 12
232 A/95 mm2
600 V/195 A/4/0 AWG
600 V/230 A/2/0…4/0 AWG
YQty. WQty.
0286920000 10 0637620000 5
YCat. No. Qty.
EP 2 (2) 0205300000 10
EP 2 (2) 0205400000 10
WCat. No. Qty.
EP 2/35 (2) 0180700000 10
EP 2/35 (2) 0180800000 10
Y + W Qty.
TW 2 (2) 0177100000 10
TW 2 (2) 0179900000 10
2/160/90.5
2/160/90.5
AH 40 0326860000 5
DEK 5 see “Accessories”
a r # u
46/106/55
46/106/54.5
–/M 12/–
1000 V*/309 A/150 mm2
8 kV/3
14…31
309 A/150 mm2
600 V/285 A/4/0 AWG
600 V/365 A/300 MCM
YQty. WQty.
0170620000 10 0637920000 5
YCat. No. Qty.
EP 2 (2) 0205300000 10
EP 2 (2) 0205400000 10
WCat. No. Qty.
EP 2/35 (2) 0180700000 10
EP 2/35 (2) 0180800000 10
Y + W Qty.
TW 2 (2) 0177100000 10
TW 2 (2) 0179900000 10
2/160/90.5
2/160/90.5
QL 2 0247000000 5
QL 3 0444400000 5
QL 4 0444500000 5
AH 46 0326960000 5
DEK 5 see “Accessories”
* During conductor connection, observe clearance and creepage distances. Insert partitions if necessary.
** Suitable for connection of 1 aluminium conductor of max 185 mm2
a r # u DNV
54/122/60
54/122/60
–/M 16/–
1000 V*/415 A/240 mm2
8 kV/3
25…60
415 A/240 mm2
(QL 2) 415
600 V/380 A/500 MCM
600 V/600 A/300…500 MCM
YQty. WQty.
0185420000 10 0638220000 5
YCat. No. Qty.
EP 2 (2) 0205300000 10
EP 2 (2) 0205400000 10
WCat. No. Qty.
EP 2/35 (2) 0180700000 10
EP 2/35 (2) 0180800000 10
Y+ W Qty.
TW 2 (2) 0177100000 10
TW 2 (2) 0179900000 10
2/160/90.5
2/160/90.5
QL 2 0264400000 5
QL 3 0408000000 5
QL 4 0247400000 5
DEK 5 see “Accessories”
46/112/74
23 mm/M 12/M 14/-
1000 V*/309 A/150 mm2
8 kV/3
14…31/25…40
50…240
35…185
YQty. WQty.
1287920000** 5
YCat. No. Qty.
EP 2 (2) 0205300000 10
EP 2 (2) 0205400000 10
WCat. No. Qty.
YQty.
TW 2 (2) 0177100000 10
TW 2 (2) 0179900000 10
2/160/90.5
2/160/90.5
QL 2 0194000000 5
QL 3 0441500000 5
QL 4 0441600000 5
AH 46 0326960000 5
DEK 5 see “Accessories”
*** Suitable for connection of 2 aluminium conductors of max.
185 mm2
Y
W
Y
W
Y
W
Y
W
Y
W
Y
SAKG 40 III
SAKG 40/35 III SAKG 46 II
SAKG 46/35 II SAKG 46 II G
SAKG 46/35 II G SAKG 54 II
SAKG 54/35 II SAKG 54 II G
SAKG 54/35 II G SAKG 46/I AL
SAKG 46/II AL
136
Stud terminals
WWW
W
Y
21
18
25
KST 5
KST 5/35 KST 6
KST 6/35 KST 8
KST 8/35
a r #
24/60/72
24/62.5/64.5
–/M 8/–
1000 V1)/125 A/35 mm2
8 kV/3
6…12
135 A/35 mm2
200
600 V/115 A/12…2 AWG
YQty. WQty.
9501320000 25
9506950000 25
9528320000 25
Y + W
TW right 1718530000 10
TW left 1752800000 10
2/160/83.5
2/160/78.5
QL 2 9501360000 1
DEK 5 see “Accessories”
a r #
24/60/55
24/62.5/49.5
–/M 5/–
1000 V1)/57 A/10 mm2
8 kV/3
2…4
65 A/10 mm2
600 V/50 A/12…6 AWG
YQty. WQty.
9503370000 25
9508230000 25
9528300000 25
Y + W
TW right 1718530000 10
TW left 2)1752800000 10
2/160/83.5
2/160/78.5
QL 2 9503390000 1
DEK 5 see “Accessories”
18/40/62
18/49.5/54.5
–/M 6/–
1000 V1)/76 A/16 mm2
6 kV/3
3…6
82 A/16 mm2
600 V/85 A/12…4 AWG
600 V/65 A/6 AWG
YQty. WQty.
0498220000250649820000 25
Cat. No. Qty.
TW SS6 (TS32)0455860000 10
TWHGW (2)(TS 35)0607100000 20
2/129/93
2/70/62.5
QL 2 0284300000 20
QL 3 0279000000 20
DEK 5 see “Accessories”
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole A
Continuous current rating of cross-connection 6…10-pole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
KrG
PA
PPO
KrG
for TS 35 x 7.5 PA
for TS 35 x 15/2.3 PA
Partition, (thickness mm)
PA
Hard paper
HM
HM
Width/length/height (incl. TS 32) mm
Width/length/height (incl. TS 35) mm
Cross-connection
2-pole
3-pole
Marking tags Print
DEK Standard
Mounting rails, end brackets, further marking material see “Accessories”
1) with partition
* Depends on cable lug
SS 6
SS 6/35
a r #
24/60/62
24/62.5/54.5
–/M 6/–
1000 V1)/76 A/16 mm2
8 kV/3
3…6
82 A/16 mm2
200
600 V/65 A/12…6 AWG
YQty. WQty.
9506940000 25
9528310000 25
Y + W
TW right 1718530000 10
TW left 1752800000 10
2/160/83.5
2/160/78.5
QL 2 9501350000 5
DEK 5 see “Accessories”
30
2) Left AP is required only once at beginning of terminal strip
Stud terminals
SAK-series
137
WW
39
a r #
34/60/82
34/62.5/74.5
–/M 10/–
1000 V1)/192 A/70 mm2
8 kV/3
10…20
207 A/70 mm2
200
600 V/175 A/12…2/0
YQty. WQty.
9501330000 20
9506960000 20
9528330000 20
Y + W
TW right 1718530000 10
TW left 1752800000 10
2/160/83.5
2/160/78.5
QL 2 9501370000 1
DEK 5 see “Accessories”
a r #
34/60/82
34/62.5/74.5
–/M 12/–
1000 V1)/232 A/95 mm2
8 kV/3
14…31
250 A/95 mm2
200
600 V/200 A/12…3/0
YQty. WQty.
9506970000 20
9528340000 20
Y + W
TW right 1718530000 10
TW left 1752800000 10
2/160/83.5
2/160/78.5
QL 2 9501380000 1
DEK 5 see “Accessories”
KST 12
KST 12/35
KST 10
KST 10/35
37
138
PE terminals
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-2
Rated voltage/current with PEN/cross-section
Rated voltage/rated impulse voltage acc. to VDE 0110/1.89/
pollution severity
Further technical data
Tightening torque range Nm
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Fexible H07V-K and ferrule DIN 46 228/1 mm2
Cable AWG Nr.
Plug gauge according to 60 947-7-1 Size
Ordering data Version
Green/yellow PA
Blank
Two clamping yokes blank
Hexagon socket blank
Support block
For insulation of mounting rails
in insulated-earth installations
SK - key, 8mm
Marking tags Print
DEK Standard
a r # i
8/40/51.5
6.5/56/44
12 mm/M 3/3.5 x 0.6
–/–/4 mm2
0.5…1.0/0.5…1.0*
0.5…6
0.5…4
0.5…4
0.5…4
22…10
A 4
YQty. WQty.
0354560000100 0661160000100
Type Cat. No. Qty.
SH 2 0494920000 10
DEK 6.5 see “Accessories”
a r #
6/36.5/49.5
6/56/40
10 mm/M 2.5/3.5 x 0.6
–/–/2.5 mm2
0.4…0.8/0.5…1.0*
0.5…4
0.5…2.5
0.5…4
0.5…2.5
22…14
A 3
YQty. WQty.
0474360000100 0661060000100
Type Cat. No. Qty.
SH 2 0494920000 10
DEK 6 see “Accessories”
a r #
10/40/51.5
10/56/44
12 mm/M 4/5.5 x 1.0
–/–/10 mm2
1.2…2.4/0.5…1.0*
0.5…10
1.5…6
0.5…10
0.5…10
20….8
B 6
YQty. WQty.
035466000080 0661360000100
Type Cat. No. Qty.
SH 2 0494920000 10
DEK 5 see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
Y
Y
a r #
8/56/44
12 mm/M 3.5/4.0/0.8
–/–/6 mm2
1.2…1.6/0.5…1.0*
0.5…10
1.5…6
0.5…10
0.5…6
20…8
A 5
WQty.
0661260000100
Type Cat No. Qty.
SH 2 0494920000 10
DEK 8 see “Accessories”
WWY
W
W
EK 2.5 N
EK 2.5/35 EK 4
EK 4/35 EK 10
EK 10/35
EK 6/35
* For centre screw
PE terminals
SAK-series
139
r #
10/52/38
14 mm/M 4/–
–/–/10
1.2…2.4/2.0…4.0*
1.5…10
1.5…10
1.5…10
1.5…10
16…8
B 6
YQty.
0323100000 20
Type Cat. No. Qty.
r #
14/46/39
16 mm/M 6/–
–/–/35 mm2
2.5…5.0/2.0…4.0*
6…35
6…35
6…16
10…35
8…2
B 8
YQty. Qty.
0144400000 20
Type Cat. No. Qty.
SH 2 0494920000 10
r #
18/94/59.5
25 mm/M 8/–
–/–/70 mm2
6.0…12/2.0…4.0*
10…70
10…70
10…70
10…70
6…0
B 10
YQty. WQty.
0213200000 20
1338300000 10
Type Cat. No. Qty.
SH 2 0494920000 10
a r #
18/58/67.5
16/58/60
20 mm/M 6/6.5 x 1.2
–/–/35 mm2
2.5…5.0/ **
6…16
16…50
10…35
10…35
10…2
B 9
YQty. WQty.
0354760000 20 066146000020
Type Cat. No. Qty.
SH 2 0494920000 10
DEK 5 see “Accessories”
YYY
a r #
12/50/57.5
12/56/50
16 mm/M 4/5.5 x 1.0
–/–/16 mm2
1.2…2.4/0.8…1.0*
2.5…16
2.5…16
2.5…16
4…16
12…6
B 6
YQty. WQty.
037466000050 0190160000 50
Type Cat. No. Qty.
SH 2 0494920000 10
DEK 5 see “Accessories”
YY
25/76/100/92
25/76/100/92
27 mm/M 10/–
–/–/95 mm2
10.0…20.0/1.2…2.4*
10…120
10…95
10…95
10…95
6…4/0
B 12
YWQty.
0535300000 10
0535400000 10
0235000000
W
WW
EK 2 SAKE 35 SAKE 70EK 35**
EK 35/35
EK 16
EK 16/35 EK 95/35
** ADm f. EK 35/35 = 1.2 - 2.4 Nm
ADm f. EK 35 = 0.8 - 1.6 Nm
140
Fuse terminals
r i#u DNV
13/54/61
13/54/54
12 mm/M 4/5.5 x 1.0
500 V/6.3 A3)/10 mm2
6 kV/3
1.2…2.4
4
0.5…16
1.5…10
0.5…10
0.5…10
B 6
(QL 2…5) 47
(QL 6…10) 36
600 V/10 A/26…10 AW
YQty. WQty.
0191120000 20 0501520000 20
0501500000 20
Type Cat. No. Qty.
AP (2.5) 0191320000 20
Wemid-beige 0191300000
for Y TW (2.0)
0607000000 20
5 x 25 mm
0.25 (m) 0546900000 10
0.5 (m) 0510300000 10
0.8 (m) 0646400000 10
1 (m) 0265800000 10
10 (m) 0193100000 10
2 (f) 0192700000 10
4 (f) 0192800000 10
6.3 (f) 0192900000 10
SK (5 x 25) 0282000000 20
DEK 5 see “Accessories”
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data/feed through-terminal base
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
Plug gauge according to 60 947-7-1 Size
Continuous current rating of cross-connection 2…5-pole A
Continuous current rating of cross-connection 6…10-pole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
PA
KrG
Beige Wemid
End plate/partition (thickness mm)
G-fuse inserts
Acc. to IEC 60127-2 (VDE 0820 T.2 Bl 1) rated current (A): 0.10 fast
Rated voltage 250 V 0.20 fast
Fast switching capacity 1500 A 0.25 fast
(at 250 V, 50 Hz, cos ϕ= 0.7) 0.50 fast
1.0 fast
1.6 fast
2.0 fast
2.5 fast
3.15 fast
4.0 fast
5.0 fast
6.3 fast
Contact sleeve
Screw cap/disconnector lever (spare)
Red pull lever
Marking tags Print
DEK Standard
a r i#DNV
13/54/61
13/54/54
12 mm/M 4/5.5 x 1.0
500 V/6.3 A3)/10 mm2
6 kV/3
1.2…2.4
4
0.5…16
1.5…10
0.5…10
0.5…10
B 6
(QL 2…5) 47
(QL 6…10) 36
300 V/6.3 A/22…10 AWG
600 V/10 A/26…10 AWG
YQty. WQty.
0191220000 20 0501620000 20
Type Cat. No. Qty.
AP (2.5) 0191320000 20
Wemid beige 0191300000 20
for Y TW (2.0)
0607000000 20
5 x 20 mm
0430300000 10
0430400000 10
0430500000 10
0430600000 10
0430700000 10
0430800000 10
0430900000 10
0431000000 10
SK (5 x 20) 0282100000 20
DEK 5 see “Accessories”
a r #
8/58/45.5
8/58/44
9 mm/M 3/3.5 x 0.6
500 V/6.3 A2)/4 mm2
6 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
A 3
(QB 2…4) 10
300 V/6.3 A/12 max. AWG
300 V/6.3 A/26…12 AWG
Y+W Cat.No. Qty.
0474560000 100
Type Cat. No. Qty.
AP (1.5) 0380360000 20
5 x 20 mm
0430300000 10
0430400000 10
0430500000 10
0430600000 10
0430700000 10
0430800000 10
0430900000 10
0431000000 10
0553300000 100
TH 0377060000100
SIHA 1593020000 100
DEK 8 see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
W
YYY
a
8/73.5/59,8
8/73.5/55,7
9 mm/M 3/3.5 x 0.6
500 V/6.3 A/4 mm2
6 kV/3
0.5…1.0
2
0.5…4
0.5…4
0.5…4
A 4
(QB 2…4) 10
300 V/15 A/12 max. AWG
YQty. WQty.
9503300000 50 9503310000 50
Type Cat. No. Qty.
AP 1 KDKS 9503330000 25
Wemid 9532470000 25
for Y TW (2.0)
0607000000 20
5 x 20 mm
0430300000 10
0430400000 10
0430500000 10
0430600000 10
0430700000 10
0430800000 10
0430900000 10
0431000000 10
0553300000 100
TH 0377060000 100
SIHA 1593020000 100
DEK 8 see “Accessories”
WWW
Y
1) Multipole interruptable with group marking carrier
Sch2 2-pole Cat. No. 1359500000, 1000 mm Cat. No. 0337400000
SAKS 1/G25
SAKS 1/35/G25
SAKS 1
SAKS 1/35
ASK 11)
ASK 1/351)KDKS 11)
KDKS 1/351)
Fuse terminals
SAK-series
141
13/69/62
13/69/63
12 mm/–/–
250 V/6.3 A1)/10 mm2
0.5…16
0.5…10
B 6
600 V/10 A/22…8 AWG
YQty. WQty.
950957000020 9509600000 20
Type Cat. No. Qty.
AP (3) 9509630000 20
5 x 20 mm
0.10 (f) 0430300000 10
0.20 (f) 0430400000 10
0.25 (f) 0430500000 10
0.50 (f) 0430600000 10
1.00 (f) 0430700000 10
1.60 (f) 0430800000 10
2.00 (f) 0430900000 10
2.50 (f) 0431000000 10
3.15 fast 0431100000 10
4.0 fast 0431200000 10
5.0 fast 0431300000 10
6.3 fast 0431400000 10
5 x 20 SBL 0446100000 40
DEK 5 see “Accessories”
13/69/62
13/69/63
12 mm/–/–
250 V/13 A2)/10 mm2
0.5…16
0.5…10
B 6
600 V/15 A/22…8 AWG
YQty. WQty.
950958000020 9509610000 20
Type Cat. No. Qty.
AP (3) 9509630000 20
1 x 1/4”
1 x 1/4" SBL 0446200000 40
DEK 5 see “Accessories”
13/69/62
13/69/63
12 mm/–/–
440 V/10 A/10 mm2
0.5…16
0.5…10
B 6
600 V/15 A/22…8 AWG
YQty. WQty.
9509620000 20
Type Cat. No. Qty.
AP (3) 9509630000 20
1 1/4 x 1/4”
E 2 A 0294500000 10
E 3 A 0295700000 10
E 5 A 0294600000 10
E 7 A 0295800000 10
E 10 A 0293900000 10
11/4x1/4" SBL
0446300000 40
DEK 5 see “Accessories”
YYY
1) Max. fuse rating according to DIN 41 660, IEC 127 CEE4 Type 1
2) Fuse according to BS 1362
KSKM 1
KSKM 1/35 KSKM 2
KSKM 2/35 KSKM 3
KSKM 3/35
142
Fuse terminals
r i#u
28/80/81.5
28/80/75
12 mm/M 4/5.5 x 1
500 V/10 (25) A***/10 mm2
6 kV/3
1.2…2.4
4
0.5…16
0.5…10
0.5…10
0.5…10
B 6
(QL 2…5) 47
(QL 6…10) 36
600 V/25 A/22…8 AWG
YQty. WQty.
0206820000 20 1368720000 20
Diazed E 16
Type Cat. No. Qty.
TW HP (2.0) 0607000000*20
QL 2 0207800000 20
QL 3 0207900000 20
QL 4 0208000000 20
QL 10 0338900000 20
SS M 4 0136400000 100
BS M 4x9 0103300000 100
Gauge ring
Amp. Colour Cat. No. Qty.
P 16/10 red 0208900000100
P 16/16 grey 0209000000100
P 16/20 Blue 0209100000 100
Rated voltage 500 V
E 10 A 0208500000 25
E 16 A 0208600000 25
E 20 A 0208700000 25
E 25 A 0208800000 25
SK 0284110000 20
DEK 5 see “Accessories”
W
Y
r # LR u
28/80/80.5
28/80/66
13 mm/M 4/5.5 x 1
400 V/63 A***/16 mm2
6 kV/3
1.2…2.4
4
1.5…16
1.5…16
1.5…16
1.5…16
B 7
(QL 2…5) 47
(QL 6…10) 36
600 V/63 A/14…6 AWG
YQty. WQty.
0359420000 20 0502120000 20
Neozed D 02
Type Cat. No. Qty.
TW HP (2.0) 0607000000*20
QL 2 0207800000 20
QL 3 0207900000 20
QL 4 0208000000 20
QL 10 0338900000 20
SS M 4 0136400000 100
BS M 4x9 0103300000 100
Gauge ring
Amp. Colour Cat. No. Qty.
P18/20 Blue 036180
0000
50
P18/25 yellow036190
0000
50
P18/35 black 036200
0000
50
P18/50 white 036210
0000
50
Rated voltage 400 V
E 18/20 0361300000 10
E 18/25 0361400000 10
E 18/35 0361500000 10
E 18/50 0361600000 10
E 18/63 0361700000 10
SK 0359310000 20
DEK 5 see “Accessories”
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data/feed through-terminal base
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
Plug gauge according to 60 947-7-1 Size
Continuous current rating of cross-connection 2…5-pole A
Continuous current rating of cross-connection 6…10-pole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
KrG
KrG
End plate/partition (thickness mm)
PA
HP
Cross-connection
QL SS
Fixing screws for cross-connections
Fuse inserts
1 1/4" x 1/4" Nominal current (A): 0.5 fast
1.0 fast
2.0 fast
3.0 fast
5.0 fast
7.0 fast
10.0 fast
G fuse inserts 5 x 30 mm
(500 V~/0.032…6.3 A).
Available from Wickmann-Werke GmbH,
Annastr. 113, 58453 Witten, Germany, Phone ++492302/6620
D fuse inserts
Screw cap (spare)
red
black
Marking tags Print
DEK Standard
r # LR u
24/75/73
24/75/66
14 mm/M 4/5.5 x 1
400 V**/16 A/10 mm2
6 kV/3
1.2…2.4
4
0.5…16
1.5…10
0.5…10
0.5…10
B 6
(QL 2…5) 47
(QL 6…10) 36
600 V/30 A/22…8 AWG
YQty. WQty.
0321320000 20 0501820000 20
Neozed D 01
Type Cat. No. Qty.
TW HP(2.0) 0607000000*20
QL 2 0328000000 20
QL 3 0328100000 20
QL 4 0328200000 20
QL 10 0339000000 20
SS M 4 0136400000100
BS M 4x9 0103300000100
Gauge ring
Amp.Colour Cat. No. Qty.
P14/2 pink 013800
0000
50
P14/4brr own 013810
0000
50
P14/6green 032860
0000
50
P14/10red 032870
0000
50
Rated voltage 400 V
E 14/2 0137400000 10
E 14/4 0137500000 10
E 14/6 0328300000 10
E 14/10 0328400000 10
E 14/16 0328500000 10
SK 0339410000 20
DEK 5 see “Accessories”
** Also for 440 V~ with neozed marina fuse
*** Current for overload up to 10 A, for short circuit up to 25 A
3) For fuse inserts 1 1/4 x 1/4” DEF 63
4) For fuse inserts 5 x 30
a r # LR u
13/54/61
13/54/55
12 mm/M 4/5.5 x 1
500 V/10 A/10 mm2
6 kV/3
1.2…2.4
4
0.5…16
1.5…10
0.5…10
0.5…10
B 6
(QL 2…5) 47
(QL 6…10) 36
300 V/10 A/22…10 AWG
600 V/10 A/22…10 AWG
YQty. WQty.
0248920000
3
)20 0667520000
3
)20
0297520000
4
)20 0328920000
4
)20
Type Cat. No. Qty.
AP (2.5) 0191320000
for Y
TW (2.0) 0607000000
Fuse insert
E 0.5 A 0533800000
E 1 A 0525500000
E 2 A 0294500000
E 3 A 0295700000
E 5 A 0294600000
E 7 A 0295800000
E 10 A 0293900000
SK (5 x 30) 0282000000 20
SK(1/4”x11/4)0428900000 20
DEK 5 see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
WWW
YYY
SAKS 2
SAKS 2/35
SAKS 5
SAKS 5/35
SAKS 4
SAKS 4/35
SAKS 3
SAKS 3/35
*only for TS 32
Fuse terminals
SAK-series
143
Dimensions/approvals
Terminal width (+ 0.2 assembly tolerance) mm
Insulation stripping length mm
Connection data
Screw connection, solid
Screw connection, flexible/ferrule with/without plastic collar
Conductor cross-section
VDE rated data
Current
Voltage
LED-current (24…60 V)
LED-current (115…230 V)
LED-current (24…230 V)
Incandescent lamp-current
Neon lamp-current
Cross-section
Ordering data
24 V–
24 V–
48 V–
60 V–
115 V–
230 V–
24 V~
48 V~
60 V~
115 V~
230 V~
Accessories
Mounting rail
End brackets (thickness mm) for TS 32 Y
for TS 35 W
End plate/End plate (thickness mm)
Cross-connections
Type ‘QL’
Cross-connection
Type ‘QB’
straight
angled
Fixing screw (fits QL)
Disconnect lever (spare)
a r
24/75/73
24/75/66
14 mm/M 4/5.5 x 1
400 V/30 A/10 mm2
6 kV/3
1.2…2.4
4
0.5…16
1.5…10
0.5…10
0.5…10
B 6
(QL 2…5) 47
(QL 6…10) 36
600 V/30 A/20…8 AWG
600 V/30 A/22…8 AWG
YQty. WQty.
0162220000 20 0178220000 20
10.3 x 38,1
Type Cat. No. Qty.
TW HP (2.0) 0607000000*20
QL 2 0328000000 20
QL 3 0328100000 20
QL 4 0328200000 20
QL 10 0339000000 20
SS M 4 0136400000 100
BS M 4 x 9 0103300000100
SK(w.spring) 0161730000 20
DEK 5 see “Accessories”
W
Y
Mounting rails, end brackets, further marking material see “Accessories”
KDKS 1
Fuse insert 5 x20
AC model
DC model
Fuse terminals
with fault indicator ASK 1 LD
1)When using QB, the rated cross-current reduces to max. 2.5 mm2
Warning:
In the event of a faulty fuse,
the connection system is live!
Warning:
In the event of a faulty fuse,
the connection system is live!
SAKS 4 USA
a r
8
9
0.5…4 mm2
0.5…4 mm2
AWG 22…12
6.3 A
24…230 V
(depending on terminal)
≤2 mA
≤2 mA
4 mm2
Type Cat. No. Qty.
ASK 1 LD 8050810000 25
ASK 1 LD 0222760000 25
ASK 1 LD 0225260000 25
ASK 1 LD 0226460000 25
ASK 1 LD 0225460000 25
ASK 1 LD 0225660000 25
ASK 1 LD 0222860000 25
ASK 1 LD 0225360000 25
ASK 1 LD 0226360000 25
ASK 1 LD 0225560000 25
ASK 1 LD 0225760000 25
Mountable on
TS 32 and TS 35
TS 32 0122800000
TS 35x7.5 0383400000
TS 35x15 0498000000
EWK 1 0206160000 50
EW 35 0383560000 50
AP PA (1.5) 0380360000 20
QB 21)0461100000100
QB 31)0461200000 50
QB 41)0461300000 50
TH (spare) 0377060000100
8
9
0.5…4 mm2
0.5…4 mm2
AWG 22…12
6.3 A
24…230 V
(depending on terminal)
≤2 mA
4 mm2
Type Cat. No. Qty.
KDKS 1 8146450000 25
KDKS 1 8148930000 25
KDKS 1 8148920000 25
KDKS 1 8142840000 25
KDKS 1 8148910000 25
Mountable on
TS 32 and TS 35
TS 32 0122800000
TS 35x7.5 0383400000
TS 35x15 0498000000
EW 35 0383560000 50
QB 21)0461100000100
QB 31)0461200000 50
QB 41)0461300000 50
QB 581)0545400000
QB 581)0545300000
144
Fuse terminals
with fault indicator
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Terminal width (+ 0.2 assembly tolerance) mm
Insulation stripping length/clamping screw/screwdriver blade
Connection data
Screw connection, solid
Screw connection, flexible
Conductor cross-section
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
VDE rated data
Voltage/current
LED-current (24…60 V)
LED-current (115…230 V)
Incandescent lamp-current
Neon lamp-current
Cross-section
Ordering data Voltage
Fuse insert
5 x 20 LED 24 V–
Acc. to IEC 60127-2 (VDE 0820 T.2 Bl 1)
24 V~
without indicator
48 V–
48 V~
Incandescent lamp 24 V0
48 V0
Neon lamp 115 V0
230 V0
Fuse insert
5 x 25 LED 24 V–
Acc. to DIN 41576
without indicator
Incandescent lamp 48 V0
Neon lamp 115 V0
230 V0
Accessories
Mounting rail
End brackets (thickness mm) for TS 32 Y
for TS 35 W
End plate (thickness mm)
Cross-connection
Type ‘QL’
Cross-connection
Type ‘QB’
Fixing screw (fits QL)
Screw cap (spare)
Neon lamp
SAKS 1
Fuse insert 5 x20/5 x25
Warning:
In the event of a faulty fuse,
the connection system is live!
SAKS 4
Fuse insert E14/D 01
(e.g. Neozed D 01)
Warning:
In the event of a faulty fuse,
the connection system is live!
SAKS 6
Fuse insert 11/4“x 1/4“
acc. to DEF 63
Warning:
In the event of a faulty fuse,
the connection system is live!
SAKS 7
Fuse insert 5 x20/5 x25
Warning:
In the event of a faulty fuse,
the connection system is live!
24
14
0.5…16 mm2
0.5…10 mm2
AWG 20…7
1.2…2.4
4
–/16 A
≤1 mA
10 mm2
Type Cat. No. Qty.
SAKS 4
TS 32 Neon lamp
Voltage
115 V00101820000 10
480 V00102120000 10
Type Cat. No. Qty.
TS 32 0122800000
EWK 1 (8.5) 0206160000 50
a r
12
12
0.5…16 mm2
0.5…10 mm2
AWG 20…8
1.2…2.4
4
500 V~/10 A
10 A
≤1 mA
≤1 mA
10 mm2
Type Cat. No. Qty.
SAKS 7 KrG
for 5 x 25 0576120000 40
SAKS 7 KrG
for 5 x 20 0573120000 40
exchangable neon lamps
(please order separately)
Type Cat. No. Qty.
TS 32 0122800000
EWK 1 (8.5) 0206160000 50
AP KrG (3) 0146720000 20
QL 2 0207800000 20
QL 3 0207900000 20
QL 4 0208000000 20
QL 10 0338900000 20
BSM 4 x9 m.SS
0133300000100
Neon lamp 230 V~
0550300000
Neon lamp 115 V~
0550200000
a r
12
12
0.5…16 mm2
0.5…10 mm2
AWG 20…8
1.2…2.4
4
500 V~/10 A
10 A
≤1 mA
≤1 mA
10 mm2
Type Cat. No. Qty.
SAKS 6 KrG 0531820000 40
for 11
/
4“ x 1
/
4“ acc. to DEF 63
exchangable neon lamps
(please order separately)
Type Cat. No. Qty.
TS 32 0122800000
EWK 1 (8.5) 0206160000 50
AP KrG 0146720000 20
QL 2 0191400000 50
QL 3 0191500000 50
QL 4 0191600000 20
QL 10 0338800000 20
BSM 3x6 m.SS
0346200000100
Neon lamp 230 V~
0550300000
Neon lamp 115 V~
0550200000
a r
13
12
0.5…16 mm2
0.5…10 mm2
AWG 20…8
1.2…2.4
4
–/10 A
≤5 mA
≤50 mA
≤0.5 mA
10 mm2
YQty. WQty.
SAKS 1 LD
0371420000 10 0225820000 10
1111220000 10 1111320000 10
0371420000 10 0214020000 10
SAKS 1 GL
017322000010
0378920000 10
SAKS 1 GL
0385320000 10 8068330000 10
0306120000 10 0199920000 10
SAK 1 LD
on demand
SAKS GL
on demand
SAKS 1 GL
0309320000 10 0198620000 10
Type Cat. No. Qty.
TS 32 0122800000
TS 35x7.5 0383400000
TS 35x15 0498000000
EWK 1 (8.5) 0206160000 50
EW 35 (8.5) 0383560000 50
AP KrG (3) 0191320000 20
SK (5 x 20) 0282100000 20
SK (5 x 25) 0282000000100
Fuse inserts and gauge rings for Weidmüller fuse terminals
SAK-series
145
for terminal type
SAKS 1
SAKS 7
ASK 1
WSI 6
SAKS 1
SAKS 7
WSI 6
SAKS 32)
SAKS 6
SAKS 2
SAKS 44)
SAKS 5
Gauge rings
For terminal type
SAKS 4 and 4/35
SAKS 5 and 5/35
SAKS 2 and 2/35
Size (mm)
5 x 20
Breaking capacity 1500 A
(at 250 V, 50 Hz, cos : 0.7)
5 x 25 m. K.1)
Breaking capacity 80 A
(at 250 V, 50 Hz, cos := 1)
E 0.5 A
E 1 A
E 2 A
E 3 A
E 5 A
E 7 A
E 10 A
E 10 A
E 16 A
E 20 A
E 25 A
E 14/2
E 14/4
E 14/6
E 14/10
E 14/16
E 18/20
E 18/25
E 18/35
E 18/50
E 18/63
Rated voltage (V)
250
250
440
500
400
400
Rated current (A) Type
0.1 (F) G 20/0.10A/F
0.2 (F) G 20/0.20A/F
0.25 (F) G 20/0.25A/F
0.5 (F) G 20/0.50A/F
0.63 (F) G 20/0.63A/F
1.0 (F) G 20/1.00A/F
1.6 (F) G 20/1.60A/F
2.0 (F) G 20/2.00A/F
2.5 (F) G 20/2.50A/F
3.15 (F) G 20/3.15A/F
4.0 (F) G 20/4.00A/F
5.0 (F) G 20/5.00A/F
6.3 (F) G 20/6.30A/F
0.25 (M) G 25/0.25A/M
0.5 (M) G 25/0.50A/M
0.8 (M) G 25/0.80A/M
1 (M) G 25/1.00A/M
10 (M)5)G 25/10.0A/M
2 (F) G 25/2.00A/F
4 (F) G 25/4.00A/F
6.3 (F) G 25/6.30A/F
(M) = mittelträge (F) = fast
0.5 GZ 0.5A/F
1GZ 1.0A/F
2GZ 2.0A
3GZ 3.0A
5GZ 5.0A
7GZ 7.0A
10 GZ 10.0A
10 E 16/10A RT
16 E 16/16A GR
20 E 16/20A BL
25 E 16/25A GE
2E 14/2A RS
4E 14/4A BR
6E 14/6A GN
10 E 14/10A RT
16 E 14/16A GR
20 E 18/20A BL
25 E 18/25A GE
35 E 18/35A SW
50 E 18/50A WS
63 E 18/63A KU
(F) = fast
(M) = miedium-delayed action
Cat. No. Qty.
0430300000 10
0430400000 10
0430500000 10
0430600000 10
0439000000 10
0430700000 10
0430800000 10
0430900000 10
0431000000 10
0431100000 10
0431200000 10
0431300000 10
0431400000 10
0546900000 10
0510300000 10
0646400000 10
0265800000 10
0193100000 10
0192700000 10
0192800000 10
0192900000 10
0533800000 10
0525500000 10
0294500000 10
0295700000 10
0294600000 10
0295800000 10
0293900000 10
0208500000 25
0208600000 25
0208700000 25
0208800000 25
0137400000 10
0137500000 10
0328300000 10
0328400000 10
0328500000 10
0361300000 10
0361400000 10
0361500000 10
0361600000 10
0361700000 10
G fuse inserts 5 x 20 without indicator acc. to
IEC 60127-2 (VDE 0820 T.2 Bl 1)
G fuse inserts 5 x 25 with indicator acc. to DIN 415761)
33 kA Breaking capacity 33 kA fast
D fuse inserts E 16 with indicator acc. to DIN 49360 (diazed)
D fuse inserts E 14 Size D 01 and E 18 size D 02 with indicator acc. to DIN 49522 (neozed)3)
Cat. No. Qty.
0138000000 50
0138100000 50
0328600000 50
0328700000 50
0361800000 50
0361900000 50
0362000000 50
0362100000 50
0208900000 100
0209000000 100
0209100000 100
Gauge ring type
P 14/2
P 14/4
P 14/6
P 14/1
P 18/20
P 18/25
P 18/35
P 18/50
P 16/10
P 16/16
P 16/20
Amp. Colour
2Pink
4Brown
6Green
10 Red
20 Blue
25 Yellow
35 Black
50 White
10 Red
16 Grey
20 Blue
Type
P 14/2D01 RS
P 14/4D01 BR
P 14/6D01 GN
P 14/10D01 RT
P 18/20D02 BL
P 18/25D02 GE
P 18/35D02 SW
P 18/50D02 WS
P 16/10 RT
P 16/16 GR
P 16/20 BL
Note: 1) The SIBA company also supplies 5 x 25 G fuse inserts with indicators in a shipbuilding model for 450 V AC.
2) 5 x 30 (500 V AC) fuse inserts for SAKS 3 are available from the WICKMANN company
3) The LINDNER company also supplies neozed fuse cartridges in an additional shipbuilding mode for 440 V AC.
4)
Fuse cartridges with the dimensions 1"x1
/
4" c25.4x6.35 mm and 13/32"x11
/
2" c10.3x38.1 mm ar not included in product line.
5) Only for SAKS 1 and SAKS 7.
Fuse inserts 11
/
4“ x 1
/
4“ without indicator acc. to BS 88
Fuse inserts
146
Disconnect test terminals
1) without DLS
2) with DLS empty
3) with DLS 1N4007
4) When using QB the rated cross-current reduces to max. 2.5 mm2 5) With DKT 4 only on upper terminal level
6) As disconnect test terminal rated voltage 250 V
YYY
Y
Mounting rails, end brackets, further marking material see “Accessories”
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
With/without plastic insulating collar mm2
Plug gauge according to 60 947-7-1 Size
Continuous current rating of cross-connection 2…5-pole A
Continuous current rating of cross-connection 6…10-pole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Type
KrG
PA
Without diode PA
With diode PA
Blue PA
Orange PA
With 2 StB5)KrG
With 2 StB5)PA
With 2 StB5)without diode PA
With 2 StB5)Blue
End plate (thickness mm)
KrG
PA
Blue PA
Partition (thickness mm)
Cross-connection
QB 4 2-pole
3-pole
4-pole
25-pole
Contact sleeve (spare)
Test plug
Diode plug (spare)
without diode
with diode 1N4007
with diode 1N4007
with jumper
Marking tags Print
DEK Standard
WWW
W
DLS 2
DKT 4
DKT 4/35 DKT 4 V
DKT 4 V/35
SAKR
SAKR/35 SAKR-D
SAKR-D/35
a r #
6.5/42/40.5/54.5 (opened)
6.5/46/38/52
8 mm/M 3/3.5 x 0.6
400 V6)/10 A/4 mm2
6 kV/3
0.5…1.0/0.5 StB
2/1
0.5…4
1.5…4
0.5…4
0.5…4
A 3
(QB 2…25) 10
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
YQty. WQty.
0412120000100
0412160000100 0172160000100
0412180000100 0172180000100
1461960000100
0412220000100
0412260000100 0183360000100
0412280000100 0183380000100
Type Cat. No. Qty.
AP (1.5) 0211320000 20
AP (1.5) 0211360000 20
AP (1.5) 0211380000 20
TW HP (1.0) 0297100000 20
QB 24)0482700000100
QB 34)0482800000 50
QB 44)0482900000 50
QB 25 blank4)0134000000 20
PS 2.3 0180400000 20
DEK 6.5 see “Accessories”
6.5/42/40.5/57 (with DLS 2)
6.5/46/38/54.5
8 mm/M 3/3.5 x 0.6
400 V/10 A/4 mm2
6 kV/3
0.5…1.0/0.5 StB
2/1
0.5…4
1.5…4
0.5…4
0.5…4
A 3
(QB 2…25) 10
300 V/10 A/26…12 AWG
300 V/10 A/22…12 AWG
YQty. WQty.
04129600001)100 02999600001)50
04130600002)50 01857600002)50
02636600003)50 02995600003)50
05464600001)100
04131600002)50
Type Cat. No. Qty.
AP (1.5) 0211360000 20
TW HP (1.0) 0297100000 20
QB 24)0482700000100
QB 34)0482800000 50
QB 44)0482900000 50
QB 25blank4)0134000000 20
PS 2.3 0180400000 20
DLS 2 0321060000 50
DLS 2 )0630160000 50
DLS 2 (0547760000 50
DLS 2 0547660000 25
DEK 6.5 see “Accessories”
a r #
6/65/56.5/70 (opened)
6/65/56.5/70
9 mm/M 3/3.5 x 0.6
400V/10 A/4 mm2
6 kV/3
0.5…1.0/0.5 StB
2/1
0.5…4
1.5…4
0.5…4
0.5…4
A 3
(QB 2…4) 10
300 V/10 A/22…12 AWG
300 V/10 A/26…12 AWG
YQty. WQty.
0687360000 50 0687460000 50
0327860000 50 0327960000 50
Type Cat. No. Qty.
AP (1.5) 0687560000 20
TW HP (2.0) 0607000000 20
QB 24)0482700000100
QB 34)0482800000 50
QB 44)0482900000 50
PS 2.3 0180400000 20
DEK 6 see “Accessories”
6/65/56.5/70 (opened)
6/65/56.5/70
9 mm/M 3/3.5 x 0.6
400 V/10 A/4 mm2
6 kV/3
0.5…1.0/0.5 StB
2/1
0.5…4
1.5…4
0.5…4
0.5…4
A 3
(QB 2…4) 10
300 V/10 A/22…12 AWG
300 V/10 A/26…12 AWG
YQty. WQty.
1304860000 50 1304960000 50
Type Cat. No. Qty.
AP (1.5) 0687560000 20
TW HP (2.0) 0607000000 20
QB 24)0482700000 100
QB 34)0482800000 50
QB 44)0482900000 50
PS 2.3 0180400000 20
DEK 6 see “Accessories”
Disconnect test terminals
SAK-series
147
Y
W
a r #
8/58/49
8/58/44
9 mm/M 3/3.5 x 0.6
500 V/19 A/4 mm2
6 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
A 3
(QB 2…4) 10
300 V/15 A/12 max. AWG
300 V/6.3 A/26…12 AWG
Y+WQty.
0456360000100
0105260000100
Type Cat. No. Qty.
AP (1.5) 0380360000 20
TW HP (2.0) 0607000000 20
QB 24)0461100000100
QB 34)0461200000 50
QB 44)0461300000 50
K sleeve 0553300000100
DEK 5 FW see “Accessories”
ASK 1
ASK 1/35
multipole interruptable with
group marking carrier SchS 2;
2-pole (Cat. No. 1359500000)
1000 mm (Cat. No. 0337400000)
148
Feed-through terminals with tab connection
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/-current
Rated cross-section for clamping yokes
Rated cross-section tab 6.3/2.8 mm
Rated Voltage VDE 0110/1.89/pollution severty
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole A
Continuous current rating of cross-connection 6…10-pole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
Slotted KrG
Slotted blue KrG
Slotted PA
Unslotted KrG
Unslotted blue KrG
Unslotted PA
End plate/partition/small partition (thickness mm)
AP TW TSCH 1 KrG
Blue KrG
PA
PA
HP
HP
Only for PA
Cross-connection
Q4 2-pole
3-pole
4-pole
10-pole
25-pole
Plug adapter
2-pole
3-pole
4-pole
Clips into PA version 5-pole
of AST3 and AST4 only 8-pole
Test plug/socket
Plug-test socket without using QL for TS 32
PS
StB
Insulation sleeve
Marking tags Print
DEK Standard
a r # u DNV
6.5/58/53.5
6.5/58/46
500 V1)/-
-
2.5/1.0 mm2
6 kV/3
(QL 2…10) 20
300 V/13 A/–
300 V/16 A/–
YQty. WQty.
0478220000 50
04782600002)5006996600002)50
0266320000 50
02663600002)5006648600002)50
Type Cat. No. Qty.
AP (3.0) 0266420000 20
AP (1.5) 0266460000 20
TW (0.5) 0474700000 20
TW (2.0) 0607000000 20
TSch 1 0319160000100
Q 2 0336700000 50
Q 3 0336800000 50
Q 4 0336900000 50
Q 10 0368800000 20
StB 14 0168600000 50
PS 2.3 0180400000 20
IH 2.8 0386060000100
IH 6.3 0386260000100
DEK 6.5 see “Accessories”
a r # DNV
6.5/40/47.5
6.5/44/40
500 V1)/-
-
2.5/1.0 mm2
6 kV/3
(QL 2…10) 20
300 V/13 A/–
300 V/16 A/–
YQty. WQty.
0442420000 100
0442470000 100
04603600002)100
0298020000 100
02367600002)100 04793600002)10
Type Cat. No. Qty.
AP (3.0) 0298120000 20
AP (1.5) 0460560000 20
TW (1.5) 0130160000 20
TW (1.0) 0297100000 20
TSch 1 0319160000100
Q 2 0336700000 50
Q 3 0336800000 50
Q 4 0336900000 50
Q 10 0368800000 20
STA 2.5/2 0165860000100
STA 2.5/3 0165960000 50
STA 2.5/4 0190360000 50
STA 2.5/5 0166060000 50
STA 2.5/8 0166160000 50
StB 14 0168600000 50
PS 2.3 0180400000 20
IH 2.8 0386060000100
IH 6.3 0386260000100
DEK 6 see “Accessories”
a r #
6.5/40/47.5
6.5/44/40
9 mm/M 2.5/3.5 x 0.6
500 V1)/-
2.5 mm2
2.5/1.0 mm2
6 kV/3
0.4…0.7
1
0.5…4
1.5…2.5
0.5…2.5
0.5…2.5
A 3
(QL 2…10) 20
300 V/13 A/22…12 AWG
300 V/16 A/24…12 AWG
YQty. WQty.
0439120000 100
0460460000 100
0321220000 100
0321270000 100
0479460000 100
Type Cat. No. Qty.
AP (3.0) 0298120000 20
AP (1.5) 0460560000 20
TW (1.5) 0130160000 20
TW (1.0) 0297100000 20
TSch 1 0319160000100
Q 2 0336700000 50
Q 3 0336800000 50
Q 4 0336900000 50
Q 10 0368800000 20
STA 2.5/2 0165860000100
STA 2.5/3 0165960000 50
STA 2.5/4 0190360000 50
STA 2.5/5 0166060000 50
STA 2.5/8 0166160000 50
StB 14 0168600000 50
PS 2.3 0180400000 20
IH 2.8 0386060000100
IH 6.3 0386260000100
DEK 6 see “Accessories”
a r # DNV
6.5/58/53.5
6.5/58/46
12 mm/M 3/3.5 x 0.6
500 V1)/-
4 mm2
2.5/1.0 mm2
6 kV/3
0.5…1.0
2
0.5…6
1.5…4
0.5…4
0.5…4
A 4
(QL 2…10) 20
300 V/13 A/22…12 AWG
300 V/16 A/24…12 AWG
YQty. WQty.
0479220000 50
0479260000 50 0664960000 50
0334520000 50
0334560000 50 0699760000 50
Type Cat. No. Qty.
AP (3.0) 0266420000 20
AP (1.5) 0266460000 20
TW (1.0) 0474700000 20
TW (2.0) 0607000000 20
TSch 1 0319160000100
Q 2 0336700000 50
Q 3 0336800000 50
Q 4 0336900000 50
Q 10 0368800000 20
StB 14 0168600000 50
PS 2.3 0180400000 20
IH 2.8 0386060000100
IH 6.3 0386260000100
DEK 6.5 see “Accessories”
1) with insulation sleeve
2) shock proof with ADP 4 cover profiles ADP4 (see section “Accessories”)
Mounting rails, end brackets, further marking material see “Accessories”
Y
YYY
WWWW
AST 1
AST1/35
6.3
2.8
AST 3
AST 3/35
6.3
2.8
AST 4
AST 4/35
6.3
2.8
AST 5
AST 5/35
6.3
2.8
Feed-through terminals with tab connection
SAK-series
149
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/-current
Rated cross-section for clamping yokes
Rated cross-section tab 6.3/2.8 mm
Rated Voltage VDE 0110/1.89/pollution severty
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2 pole A
Continuous current rating of cross-connection multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
Slotted KrG
Slotted blue KrG
Slotted PA
Unslotted KrG
End plate/partition/small partition (thickness mm)
AP TW TSch 1 KrG
Blue KrG
PA
PA
HP
T
Cross-connection
QL QB 4 2-pole
3-pole
4-pole
10-pole
25-pole
BS M 3 x 4.5 BS M 3 x 24
Test plug/socket
PS
Insulation sleeve
Marking tags Print
DEK Standard
SAK 4 S
SAK 4 S/35
6.3
2.8
SAK 4 SS
SAK 4 SS/35
6.3
2.8
SAKR F
SAKR F/35
2.8
a r #
6.5/42/40.5/54.5 (opened)
6.5/42/40.5/32.5
8 mm/M 3/3.5 x 0.6
250 V1)/10 A
4 mm2
-/1.0 mm2
6 kV/3
0.5…1.0
1
0.5…4
1.5…4
0.5…4
0.5…2.5
A 3
(QB 2…25) 10
300 V/10 A/22…12 AWG
300 V/10 A/26…12 AWG
YQty. WQty.
06636600001006382870000100
with 1 StB 6
Type Cat. No. Qty.
AP (1.5) 0211360000 20
TW (1.0) 0297100000 20
QB 2* 0482700000100
QB 3* 0482800000 50
QB 4* 0482900000 50
QB 25 blank* 0134000000 20
PS 2.3 0180400000 20
IH 2.8 0386060000 200
DEK 6.5 see “Accessories”
a r # u
6.5/40/51.5
6.5/40/49.5
12 mm/M 3/3.5 x 0.6
500 V1)/16 A
4 mm2
2.5/1.0 mm2
6 kV/3
0.5…1.0
2
0.33…6
1.5…4
0.5…4
0.5…4
A 4
(QL 2…10) 36 A at 6 mm2
300 V/13 A/26…12 AWG
300 V/13 A/26…12 AWG
YQty. WQty.
0401220000 100
0401260000100 0630360000100
Type Cat. No. Qty.
AP (1.5) 0117920000 20
AP (1.5) 0117960000 20
AP (1.5) 0130160000 20
TW (1.0) 0297100000 20
QL 2 0130600000100
QL 3 0130700000100
QL 4 0130800000 50
QL 10 0338200000 20
BS M 3x4.5 1593210000100
IH 2.8 0386060000100
IH 6.3 0386260000100
DEK 6.5 see “Accessories”
a r # u
6.5/40/51.5
6.5/40/49.5
500 V1)/16 A
-
2.5/1.0 mm2
6 kV/3
(QL 2…10) 36 A at 6 mm2
300 V/13 A/18…14 AWG
300 V/13 A/18…14 AWG
YQty. WQty.
0479620000 10
0479660000100 0630460000100
0352920000 10
Type Cat. No. Qty.
AP (1.5) 0117920000 20
AP (1.5) 0117970000 20
AP (1.5) 0117960000 20
TW (1.5) 0130160000 20
TW (1.0) 0297100000 20
QL 2 0130600000100
QL 3 0130700000100
QL 4 0130800000 50
QL 10 0338200000 20
BS M 3x4.5 1593210000100
IH 2.8 0386060000100
IH 6.3 0386260000100
DEK 6.5 see “Accessories”
*The conductor cross-section for the screw connection is reduced to
2.5 mm2when QB is used
1) With insulation sleeve
YY Y
Mounting rails, end brackets, further marking material see “Accessories”
WWW
150
Feed-through terminals with tab connection
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/-current
Rated cross-section for clamping yokes
Rated cross-section tab 6.3/2.8 mm
Rated Voltage VDE 0110/1.89/pollution severty
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
With/without plastic insulation collar
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2 pole A
Continuous current rating of cross-connection multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
PA
End plate (thickness mm)
PA
Partition
for TS 32 HP
Small partition
TSch 6
Cross-connection
Q 3 2-pole
3-pole
4-pole
10-pole
Test plug/socket
Plug test socket without using QL
StB Plug test socket for use with QL
PS
Insulation sleeve
Marking tags Print
DEK Standard
Mounting rails, end brackets, further marking material see “Accessories”
1) With insulation sleeve
a r # LR u
6/54/60.5
400 V1)/
2 x 16 A
-
2.5/1.0 mm
2
8 kV/3
(QL 2…10) 20
300 V/10 A/22…12 AWG
300 V/10 A/22…12 AWG
WCat. No. Qty.
0217160000100
Type Cat. No. Qty.
AP (1.5) 0631360000 20
TSch 6 0190260000100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
IH 2.8 0386060000100
IH 6.3 0386260000100
DEK 6 see “Accessories”
a r # LR u
6/54/60.5
400 V1)/2x10
-
1.0 mm2
4 kV/3
(QL 2…10) 20
300 V/10 A/22…12 AWG
300 V/10 A/22…12 AWG
WCat. No. Qty.
0297060000100
Type Cat. No. Qty.
AP (1.5) 0631360000 20
TSch 6 0190260000100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
IH 2.8 0386060000100
DEK 6 see “Accessories”
a r # u
6/54/59.5
6/54/60.5
9 mm/M 3/3.5 x 0.6
400 V1)/2 x 10
4 mm
2
1.0 mm2
6 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
A 3
(QL 2…10) 20
300 V/10 A/22…12 AWG
300 V/10 A/22…12 AWG
YQty. WQty.
0631260000100 0686660000100
Type Cat. No. Qty.
AP (1.5) 0631360000 20
TW HP (2.0) 0607000000 20
TSch 6 0190260000100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
IH 2.8 0386060000100
IH 6.3 0386260000100
DEK 6 see “Accessories”
a r #
6/54/59.5
6/54/60.5
9 mm/M 3/3.5 x 0.6
400 V1)/
2 x 10
4 mm
2
1.0 mm
2
6 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
A 3
(QL 2…10) 20
300 V/10 A/22…12 AWG
300 V/10 A/22…12 AWG
YQty. WQty.
0631160000 100 0686560000 100
Type Cat. No. Qty.
AP (1.5) 0631360000 20
TW HP (2.0) 0607000000 20
TSch 6 0190260000100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
PS 2.3 0180400000 20
IH 2.8 0386060000100
DEK 6 see “Accessories”
Y Y
DK 4 SS/35 DK 4 SS/35 only 2.8 DK 4 S
DK 4 S/35 DK 4 S only 2.8
DK 4 S/35 only 2.8
Feed-through terminals for wrap termination
SAK-series
151
SAK 2.5 T
Pin 1 x 1
r
6/36.5/47.5/67
12 mm/M 2.5/3.5 x 0.6
250 V/8 A/2.5 mm2
4 kV/3
0.4…0.7
1
0.5…6
0.5…2.5
0.5…4
0.5…2.5
A 3
(Q 2…10) 24
300 V/10 A/22…12 AWG
YCat. No. Qty.
0108520000100
01085600001)100
Type Cat. No. Qty.
AP (1.5) 0279520000 20
AP (1.5) 0279560000 20
TW (2.5) 0302820000 20
TW (1.5) 0302860000 20
TW (0.5) 0197100000 20
TW (2.0) 0607000000 20
TSch 1 0319160000100
Q 2 0337000000 50
Q 3 0337100000 50
Q 4 0337200000 50
Q 10 0368700000 20
StB8.5(ø2.3) 0280600000 50
PS 2.3 0180400000 20
DEK 6 see “Accessories”
r
6/36.5/47.5/62
12 mm/M 2.5/3.5 x 0.6
250 V/10 A/2.5 mm2
4 kV/3
0.4…0.7
1
0.5…6
0.5…2.5
0.5…4
0.5…2.5
A 3
(Q 2…10) 24
300 V/10 A/22…12 AWG
YCat. No. Qty.
0485920000100
0478820000100
Type Cat. No. Qty.
AP (1.5) 0279520000 20
AP (1.5) 0279560000 20
TW (2.5) 0302820000 20
TW (1.5) 0302860000 20
TW (0.5) 0197100000 20
TW (2.0) 0607000000 20
TSch 1 0319160000100
Q 2 0337000000 50
Q 3 0337100000 50
Q 4 0337200000 50
Q 10 0368700000 20
StB 8.5 (ø 2.3) 0280600000 50
PS 2.3 0180400000 20
DEK 6 see “Accessories”
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
Plug gauge according to IEC 60 947-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Pin Version
Right KrG
Horizontal right KrG
Vertical left KrG
Horizontal Vertical Vertical right KrG
assembly assembly 2x vertical KrG
Right PA
End plate (thickness mm)
KrG
PA
Partition (thickness mm)
KrG
PA
HP
HP
Small partition
Cross-connection
2-pole
3-pole
4-pole
10-pole
Test plug/socket
Plug-test socket without using QL
PS StB
Marking tags Print
DEK Standard
r
6/36.5/47.5/69
12 mm/M 2.5/3.5 x 0.6
250 V/10 A/2.5 mm2
4 kV/3
0.4…0.7
1
0.5…6
0.5…2.5
0.5…4
0.5…2.5
A 3
(Q 2…10) 24
300 V/10 A/22…12 AWG
YCat. No. Qty.
0371020000100
0485020000100
Type Cat. No. Qty.
AP (1.5) 0279520000 20
AP (1.5) 0279560000 20
TW (2.5) 0302820000 20
TW (1.5) 0302860000 20
TW (0.5) 0197100000 20
TW (2.0) 0607000000 20
TSch 1 0319160000100
Q 2** 0337000000 50
Q 3** 0337100000 50
Q 4** 0337200000 50
Q 10** 0368700000 20
StB8.5(ø2.3) 0280600000 50
PS 2.3 0180400000 20
DEK 6 see “Accessories”
** Not for Type 2 x vertical“
Mounting rails, end brackets, further marking material see “Accessories”
1) Shock-proof with ADP4 cover profile (see section
“Accessories”)
YYY
SAK 2.5 T
Pin 0.8 x 2.4
SAK 2.5 T
Pin 0.8 x 1.6
DIN 41 611, Part 2 and
for spring-clip termination
DIN 41 611, Part 4
152
Feed-through terminals
Dimensions
Width/length/height (mm) with TS 32 Y
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
With/without plastic insulating collar mm2
Plug gauge according to IEC 60 947-1 Size
Continuous current of terminal block for conductor size
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Pin Type
Right PA
Links PA
Horizontal right PA
Vertical right PA
Vertical right Blue PA
Vertical PA
Vertical left PA
DK 4 QT
bridgeable on Right PA
both levels
End plate/partition (thickness mm)
PA
Blue PA
Small partition
TSch 4
Cross-connection/covers
Q 3 QB 4 2-pole
3-pole
4-pole
10-pole
25-pole
Test plug/socket
Plug-test socket without using QL
StB
PS
FW/FS
Mounting rails, end brackets, further marking material see “Accessories”
* The conductor cross-section for the screw connection is reduced to 2.5 mm2when QB is used.
** Only to be used with PA-version
1) Shock-proof with ADP4 cover profile (see section
“Accessories”)
YYYY
Horizontal Vertical
assembly assembly
6/50/58.5/75.5
9 mm/M 3/3.5 x 0.6
250 V/8 A/4 mm2
4 kV/3
0.5…1.0
1
0.5…4
1.5…4
0.5…4
0.5…4
A3
(Q 2…10) 32
–
–
YCat. No. Qty.
0536560000 50
13984600001)50
Type Cat. No. Qty.
AP (1.5) 0359260000 20
AP (DK4 QT) 1397160000 20
AP (1.5) 0359280000 20
TW (2.0) 0607000000 20
TSch 4 0363360000100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
QB 2* 0482700000100
QB 3* 0482800000 50
QB 4* 0482900000 50
StB 8.5 (ø2.3) 0215700000 50
PS 2.3 0180400000 20
dekafix 6 see “Accessories”
6/50/60.5/77.5
9 mm/M 3/3.5 x 0.6
250 V/10 A/4 mm2
4 kV/3
0.5…1.0
1
0.5…4
1.5…4
0.5…4
0.5…4
A3
(Q 2…10) 32
–
–
YCat. No. Qty.
03704600001)50
03703600001)
Type Cat. No. Qty.
AP (1.5) 0359260000 20
AP (1.5) 0359280000 20
TW (2.0) 0607000000 20
TSch 4 0363360000100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
QB 2* 0482700000100
QB 3* 0482800000 50
QB 4* 0482900000 50
StB8.5 (ø2.3) 0215700000 50
PS 2.3 0180400000 20
dekafix 6 see “Accessories”
6/50/67.5/84.5
9 mm/M 3/3.5 x 0.6
250 V/10 A/4 mm2
4 kV/3
0.5…1.0
1
0.5…4
1.5…4
0.5…4
0.5…4
A3
(Q 2…10) 32
–
–
YCat. No. Qty.
05277600001)50
Type Cat. No. Qty.
AP (1.5) 0359260000 20
TW (2.0) 0607000000 20
TSch 4 0363360000100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
QB 2* 0482700000100
QB 3* 0482800000 50
QB 4* 0482900000 50
StB8.5(ø2.3) 0215700000 50
PS 2.3 0180400000 20
dekafix 6 see “Accessories”
6/42/40.5/54.5
8 mm/M 3/3.5 x 0.6
250 V/6/8 A/4 mm2
4 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
A3
(QB 2…10) 10
–
–
YCat. No. Qty.
1 x 1 0587460000100
0.8 x 2.4 0545060000 100
0.8 x 1.6 0469360000 100
Type Cat. No. Qty.
AP (1.5) 0211360000 20
TW (2.0) 0607000000 20
QB 2* 0482700000100
QB 3* 0482800000 50
QB 4* 0482900000 50
QB 25 blank* 0134000000 20
DK 4 T
Pin 1 x 1
DK 4 T
Pin 0.8 x 1.6
DK 4 T
Pin 0.8 x 2.4
SAKRT
Pin 1 x 1/0.8 x 2.4
and 0.8 x 1.6
Disconnect terminals
for wrap connection
acc. to DIN 41 611, Part 2 and
for spring-clip connection
acc. to DIN 41 611, Part 4
Feed-through terminals and disconnect test terminals
SAK-series
153
r #
6/60/46.5
12 mm/M 2.5/3.5 x 0.6
250 V/20 A/2.5/1.5 mm2
4 kV/3
0.4…0.7
1
0.5…6
0.5…2.5
0.5…4
0.5…2.5
A 3
(Q 2…10) 24
300 V/10 A/22…12 AWG
YCat. No. Qty.
0309120000100
Type Cat. No. Qty.
AP (1.5) 0309220000 20
AP (1.5) 0309270000 20
TW (1.5) 0302860000 20
TW (1.0) 0297100000 20
TW (2.0) 0607000000 20
TSch 1 0319160000100
Q 2 0337000000 50
Q 3 0337100000 50
Q 4 0337200000 50
Q 10 0368700000 20
AD 4 0303400000 50
BSK M3 x 22 0128900000 100
DEK 6 see “Accessories”
r #
6/44.5/46.5
6/44.5/40
12 mm/M 2.5/3.5 x 0.6
250 V/20 A/2.5/1.5 mm2
4 kV/3
0.4…0.7
1
0.5…6
0.5…2.5
0.5…4
0.5…2.5
A 3
(Q 2…10) 24
300 V/10 A/22…12 AWG
YQty. WQty.
0351420000 100
0351470000 100
03514600002)100 04950600002)100
0544120000*100
0544160000*2)100
Type Cat. No. Qty.
AP (1.5) 0309220000 20
AP (1.5) 0309270000 20
AP (1.5) 0279560000 20
TW (1.5) 0302860000 20
TW (1.0) 0297100000 20
TW (2.0) 0607000000 20
TSch 1 0319160000100
Q 2 0337000000 50
Q 3 0337100000 50
Q 4 0337200000 50
Q 10 0368700000 20
StB8.5(ø2.3) 0280600000 50
StB 29.5(ø4) 0133400000 50
PS 2.3 0180400000 20
PS 4 0299600000 20
AD 4 0303400000 50
BSK M 3 x 22 0128900000100
DEK 6 see “Accessories”
r #
6/55/46.5
6/55/40
250 V/20 A/1.5 mm2
4 kV/3
(Q 2…10) 24
300 V/10 A/26…12 AWG
YQty. WQty.
0323620000 100
0323670000 100
03236600002)10005672600002)100
Type Cat. No. Qty.
AP (1.5) 0309220000 20
AP (1.5) 0309270000 20
AP (1.5) 0279560000 20
TW (1.5) 0302860000 20
TW (1.0) 0297100000 20
TW (2.0) 0607020000 20
TSch 1 0319160000100
Q 2 0337000000 50
Q 3 0337100000 50
Q 4 0337200000 50
Q 10 0368700000 20
StB8.5(ø2.3) 0280600000 50
StB 29.5(ø4) 0133400000 50
PS 2.3 0180400000 20
PS 4 0299600000 20
AD 4 0303400000 50
BSK M 3x 22 0128900000100
DEK 6 see “Accessories”
a r #
6.5/50/40.5/54.5 (opened)
6.5/50/38/52
8 mm/M 3/3.5 x 0.6
250 V/10 A/4/1.5 mm2
4 kV/3
0.5…1.0
2/1
0.5…4
0.5…4
0.5…4
0.5…4
A 3
(QB 2…25) 10
300 V/10 A/22…12 AWG
300 V/10 A/22…12 AWG
YQty.
0412360000 100
0412380000 100
0412460000*100
0412480000*100
Type Cat. No. Qty.
AP (1.5) 02113600001)20
AP (1.5) 0211380000 20
TW (2.0) 0607000000 20
QB 2** 0482700000100
QB 3** 0482800000 50
QB 4** 0482900000 50
QB 25 blank** 0134000000 20
PS 2.3 0180400000 20
DEK 6.5 see “Accessories”
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal block for conductor size
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Type
KrG
Blue KrG
KrS
PA
Blue PA
KrG
PA
Blue PA
End plate/partition (thickness mm)
AP TW KrG
Blue KrG
PA
Blue PA
PA
HP
HP
Small partition
Cross-connection
Q 3 Q 4 2-pole
3-pole
4-pole
10-pole
25-pole
Test plug/socket
Plug-test socket without using QL
StB Plug-test-socket for use with QL
PS
Cover
Marking tags Print
DEK Standard
Mounting rails, end brackets, further marking material see “Accessories”
*Soldering lug on left-hand side
** The conductor cross-section for the screw connection is reduced to 2.5 mm2when QB is used.
1) For TS 32 and TS 35
2) Contact-proof cross-connection with ADP 4 cover profile (see “Accessories”)
YYYY
WW
SAK 2.5/M.LS
With screen lug
SAK 2.5 L
SAK 2.5 L/35 SAKR L
SAKR L/35
Disconnect terminal
SAK 2.5 LL
SAK 2.5 LL/35
with solder connection
154
Disconnect test terminals with solder connections
r #
6.5/58/40.5/54.5 (opened)
250 V/10 A/1.5 mm2
4 kV/3
300 V/10 A/22…12 AWG
YQty.
0464460000 100
Type Cat. No. Qty.
AP (1.5) 0211320000 20
AP (1.5) 0211360000 20
AP (1.5) 0211380000 20
TW (0.5) 0474700000 20
TW (2.0) 0607000000 20
DEK 6.5 see “Accessories”
6.5/58/40.5/54.5 (opened)
–/–/3.5 x 0.6
250 V/10 A/1.5 mm2
4 kV/3
YQty. WQty.
0294260000 100
Type Cat. No. Qty.
AP (1.5) 0211320000 20
AP (1.5) 0211360000 20
AP (1.5) 0211380000 20
TW (0.5) 0474700000 20
TW (2.0) 0607000000 20
PS 2.3 0180400000 20
DEK 6.5 see “Accessories”
6.5/50/40.5/54.5 (opened)
8 mm/M 3/3.5 x 0.6
250 V/10 A/4/1.5 mm2
4 kV/3
0.5…1.0
1
0.5…4
1.5…4
0.5…4
0.5…4
A 3
(QB 2…25) 10
YQty. WQty.
0518160000*100 0183560000 100
0572660000 100
Type Cat. No. Qty.
AP (1.5) 0211360000 20
AP (1.5) 0211380000 20
TW (0.5) 0474700000 20
TW (2.0) 0607000000 20
QB 2** 0482700000100
QB 3** 0482800000 50
QB 4** 0482900000 50
QB 25 blank** 0134000000 20
PS 2.3 0180400000 20
DEK 6.5 see “Accessories”
* Soldering lug on left-hand side
** The conductor cross-section for the screw connection is reduced to 2.5 mm2when QB is used.
Y
WY
WY
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46228/1
With/without plastic insulating collar mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal block for conductor size
Continuous current rating of cross-connection 2 pole A
Continuous current rating of cross-connection multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Type
KrG
Blue KrG
KrS
PA
Blue PA
KrG
KrS
PA
Blue PA
End plate/partition (thickness mm)
AP TW KrG
Blue KrG
PA
Blue PA
PA
HP
HP
Small partition
Cross-connection
QB 3 QB 4
2-pole
3-pole
4-pole
10-pole
25-pole
Test plug/socket
PS
Marking tags Print
DEK Standard
Mounting rails, end brackets, further marking material see “Accessories”
SAKR L
With 2 StB 6
SAKR LL SAKR LL
With 2 StB 6
Disconnect test terminals with solder connections
SAK-series
155
4/48/36/50 (opened)
63 V/10 A/1.5 mm2
1.5 kV/3
YCat. No. Qty.
0212060000 100
Type Cat. No. Qty.
AP (1.5) 0212260000 20
On demand
4/54/36/50 (opened)
63 V/10 A/1.5 mm2
1.5 kV/3
YCat. No. Qty.
0304960000100
Type Cat. No. Qty.
AP (1.5) 0212260000 20
On demand
8/40/53
12 mm/M3/3.5 x 0.6
IEC 60 947-7-1
800 V/32 A/4 mm2
0.5…1
0.5...6 mm2
0.5...4 mm2
A 4
35 A/6 mm2
36
36
YCat. No. Qty.
SAKK 4 1598080000 50
Type Cat. No. Qty.
AP/SAKK4/10 9502630000 10
Type Cat. No. Qty.
QL 2 9509420000100
QL 3 9509430000100
QL 4 9509440000 50
QL 10 9509450000 20
VH 13.5 0248500000 100
BS (M 3 X 20) 0303000000 100
SST 0152700000
MEW 1/32 0445600000
EK 2 0323100000
11.5/40/53
12 mm/M 4/5.5 x 1.0
IEC 60 947-7-1
800 V/57 A/10 mm2
1.2…2
2.5...16 mm2
2.5...10 mm2
B 6
63 A/16 mm2
47
36
YCat. No. Qty.
SAKK 10 1598090000 50
Type Cat. No. Qty.
AP/SAKK4/10 9502630000 10
Type Cat. No. Qty.
QL 2 9509470000 100
QL 3 9509480000 50
QL 4 9509490000 50
QL 10 9509500000 20
VH 12.5 9509510000 50
BS (M3 X 20) 0303000000 100
SST 0152700000
MEW 1/32 0445600000
EK 2 0323100000
YY
Dimensions/approvals
Width/length/height (mm) with TS 32 Y
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal block for conductor size
Continuous current rating of cross-connection 2 pole A
Continuous current rating of cross-connection multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Type
KrG
Blue KrG
KrS
PA
Blue PA
KrG
KrS
PA
Blue PA
Ceramic
End plate/partition (thickness mm)
AP TW KrG
Blue KrG
PA
Blue PA
PA
Small partition
Cross-connection
Q 3 QB 4 2-pole
3-pole
4-pole
10-pole
25-pole
Additional accessories
Marking tags Print
DEK Standard
Mounting rails, end brackets, further marking material see “Accessories”
TAL
2 solder connections
TAL
4 solder connections
SAKK 4 SAKK 10
Ceramic feed-through terminals for use in high temperature
ranges up to max. 210°C
156
Feed-through terminals for initiators and actuators
1) DLI 2.5/35/10 = Block of 10 with built-in cross-connections * only in upper busbar
Mounting rails, end brackets, further marking material see “Accessories”
W
For cross-connections for more
than 20 terminals, replace VH with
VH 4.2 (134580)
without internal thread
Snap fit, external cross-connec-
tion VQB 1.5.
Dimensions/approvals
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule according to DIN 46228/1 mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole A
Continuous current rating of cross-connection 6…10-pole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data
Standard
with diode 1N4007
with LED red (5…30 V)
with LED green (5…30 V)
with LED and diode 1N4007
with LED and diode 1N4007
Block of 101)
Block of 101)
Fuse inserts
End plate/Small partition
AP-DLI AP-DLD Part-AP TSch 1
(thickness 1.5 mm)
Test plug/plug socket
StB 8.5 PS
Cross-connection
Q 3
VQB
Group marking
WT 4
Cover
HP 4
Marking tags Print
DEK Standard
WWW
a r #
6/65/49
7 mm/M 2.5/3.5 x 0.6
5–30 V-/20 A/2.5 mm2
0.8 kV/3
0.4…0.6
1
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A 3
20 A/2.5 mm2
(Q 2…10) 20
300 V/10 A/26…12 AWG
WBest.-Nr . Qty.
1578550000 100
1578560000 100
Type Cat. No. Qty.
AP 1313260000 20
TSch 1 0319160000 100
Q 2 1312500000 50
Q 3 1312600000 50
Q 4 1312700000 50
Q 10 1313100000 20
Q 20 1399800000 20
QL 2 0297200000 100
VH 4.2 1345800000 100
VQB1.5/50 BL1633280000 5
VQB1.5/50 RT 1633290000 5
VQB1.5/50 SW 1635120000 5
WT 4 1341060000 100
SF 10 03324000001000
SG 10 03325000001000
ADP 0485400000 20
HP 4 0485860000 20
DEK 6 see “Accessories”
a r #
6/65/49
7 mm/M 2.5/3.5 x 0.6
5–30 V-/20 A/2.5 mm2
0.8 kV/3
0.4…0.6
1
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A 3
20 A/2.5 mm2
(Q 2…10) 20
300 V/10 A/26…12 AWG
WCat. No. Qty.
1578510000 100
1578520000 100
(LED red) 1578530000 10
(LED green) 1578540000 10
Type Cat. No. Qty.
AP 1313260000 20
TSch 1 0319160000 100
Q 2 1312500000 50
Q 3 1312600000 50
Q 4 1312700000 50
Q 10 1313100000 20
Q 20 1399800000 20
QL 2 0297200000 100
VH 4.2 1345800000 100
VQB1.5/50 BL1633280000 5
VQB1.5/50 RT 1633290000 5
VQB1.5/50 SW 1635120000 5
WT 4 1341060000 100
SF 10 03324000001000
SG 10 03325000001000
ADP 0485400000 20
HP 4 0485860000 20
DEK 6 see “Accessories”
a r #
6/65/49
7 mm/M 2.5/3.5 x 0.6
250 V/20 A/2.5 mm2
4 kV/3
0.4…0.6
1
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A 3
20 A/2.5 mm2
(Q 2…10) 20
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
WCat. No. Qty.
1313360000 100
(w/o) 1411360000 10
(with dekafix) 1579070000 10
Type Cat. No. Qty.
AP 1313260000 20
TSch 1 0319160000 100
StB8.5*(ø2.3) 0215700000 50
PS 2.3 0180400000 20
Q 2 1312500000 50
Q 3 1312600000 50
Q 4 1312700000 50
Q 10 1313100000 20
Q 20 1399800000 20
QL 2 0297200000 100
VH 4.2 1345800000 100
VQB1.5/50BL 1633280000 5
VQB1.5/50RT 1633290000 5
VQB1.5/50SW1635120000 5
WT 4 1341060000 100
SF 10 03324000001000
SG 10 03325000001000
ADP 0485400000 20
HP 4 0485860000 20
DEK 6 see “Accessories”
a r #
6/82/49
7 mm/M 2.5/3.5 x 0.6
250 V/24 A/2.5 mm2
4 kV/3
0.4…0.6
1
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A 3
(Q 2…10) 20
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
WCat. No. Qty.
1317060000 50
Type Cat. No. Qty.
AP 1317660000 20
AP (Part-AP)1381860000 20
TSch 1 0319160000 100
StB8.5*(ø2.3) 0215700000 50
PS 2.3 0180400000 20
Q 2 1312500000 50
Q 3 1312600000 50
Q 4 1312700000 50
Q 10 1313100000 20
Q 20 1399800000 20
QL 2 0297200000 100
VH 4.2 1345800000 100
VQB1.5/50 BL1633280000 5
VQB1.5/50 RT 1633290000 5
VQB1.5/50 SW 1635120000 5
WT 4 1341060000 100
SF 10 03324000001000
SG 10 0332500000 1000
ADP 0485400000 20
HP 4 0485860000 20
DEK 6 see “Accessories”
DLI 2.5 DLI 2.5 LD PNP DLI 2.5 LD NPN DLD 2.5
SAK-series
157
Feed-through terminals for initiators and actuators
** If the cross-connection runs via the PE connection of the DLA, or if a pole is generally skipped, the rated voltage is reduced to 30 V~
2) A4 clamping position = max 4 mm2... 3) A3 clamping position = max 2.5 mm2... ferrule with/without plastic insulating collar
WWW
DLA 2.5 DLA 2.5/D DLA 2.5/LD DLA 2.5/LD/D DLD 2.5/PE KDKS1/PE
WWW
a r q #
6/65/49
7 mm/M 2.5/3.5 x 0.6
5–30 V/17.5 A/2.5 mm2
0.8 kV/3
0.4…0.6
1
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A 3
20 A/2.5 mm2
(Q 2…20) 20
300 V/10 A/26…12 AWG
5–30 V/10 A/26…12 AWG
WCat. No. Qty.
1578430000 100
1578440000 100
Type Cat. No. Qty.
AP 1313260000 20
TSch 1 0319160000 100
Q 2 1312500000 50
Q 3 1312600000 50
Q 4 1312700000 50
Q 10 1313100000 20
Q 20 1399800000 20
QL 2 0297200000 100
VH 4.2 1345800000 100
VQB1.5/50 BL1633280000 5
VQB1.5/50 RT 1633290000 5
VQB1.5/50 SW 1635120000 5
WT 4 1341060000 100
SF 10 0332400000 1000
SG 10 0332500000 1000
ADP 0485400000 20
HP 4 0485860000 20
DEK 6 see “Accessories”
a r q #
6/65/49
7 mm/M 2.5/3.5 x 0.6
5–30 V/17.5 A/2.5 mm2
0.8 kV/3
0.4…0.6
1
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A 3
20 A/2.5 mm2
(Q 2…20) 20
300 V/10 A/26…12 AWG
5–30 V/10 A/26…12 AWG
WCat. No. Qty.
(LED red) 1578470000 100
(LED green) 1578480000 100
(LED red) 1578490000 10
(LED green) 1578500000 10
Type Cat. No. Qty.
AP 1313260000 20
TSch 1 0319160000 100
Q 2 1312500000 50
Q 3 1312600000 50
Q 4 1312700000 50
Q 10 1313100000 20
Q 20 1399800000 20
QL 2 0297200000 100
VH 4.2 1345800000 100
VQB1.5/50 BL1633280000 5
VQB1.5/50 RT 1633290000 5
VQB1.5/50 SW 1635120000 5
WT 4 1341060000 100
SF 10 03324000001000
SG 10 03325000001000
ADP 0485400000 20
HP 4 0485860000 20
DEK 6 see “Accessories”
a r q #
6/65/49
7 mm/M 2.5/3.5 x 0.6
250 V**/17.5 A/2.5 mm2
4 kV/3
0.4…0.6
1
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A 3
20 A/2.5 mm2
(Q 2…20) 20
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
WCat. No. Qty.
1565970000 100
(w. dekafix) 1578380000 10
(w/o dekafix)
1578390000 10
Type Cat. No. Qty.
AP 1313260000 20
TSch 1 0319160000 100
StB8.5*(ø2.3) 0215700000 50
PS 2.3 0180400000 20
Q 2 1312500000 50
Q 3 1312600000 50
Q 4 1312700000 50
Q 10 1313100000 20
Q 20 1399800000 20
QL 2 0297200000 100
VH 4.2 1345800000 100
VQB1.5/50 BL 1633280000 5
VQB1.5/50 RT 1633290000 5
VQB1.5/50 SW 1635120000 5
WT 4 1341060000 100
SF 10 0332400000 1000
SG 10 0332500000 1000
ADP 0485400000 20
HP 4 0485860000 20
DEK 6 see “Accessories”
a r q #
6/65/49
7 mm/M 2.5/3.5 x 0.6
250 V**/17.5 A/2.5 mm2
4 kV/3
0.4…0.6
1
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A 3
20 A/2.5 mm2
(Q 2…20) 20
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
WCat. No. Qty.
1578400000 100
Type Cat. No. Qty.
AP 1313260000 20
TSch 1 0319160000 100
Q 2 1312500000 50
Q 3 1312600000 50
Q 4 1312700000 50
Q 10 1313100000 20
Q 20 1399800000 20
QL 2 0297200000 100
VH 4.2 1345800000 100
VQB1.5/50 BL1633280000 5
VQB1.5/50 RT 1633290000 5
VQB1.5/50 SW 1635120000 5
WT 4 1341060000 100
SF 10 03324000001000
SG 10 03325000001000
ADP 0485400000 20
HP 4 0485860000 20
DEK 6 see “Accessories”
a r #
6/74.5/49
7 mm/M 2.5/3.5 x 0.6
250 V**/17.5 A/2.5 mm2
4 kV/3
0.4…0.6
1
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A 3
20 A/2.5 mm2
(Q 2…20) 20
300 V/10 A/26…12 AWG
300 V/10 A/26...12 AWG
WCat. No. Qty.
1595950000 100
Type Cat. No. Qty.
AP 1595960000 20
AP (Part-AP) 1595970000
TSch 1 0319160000 100
StB8.5*(ø2.3) 0215700000 50
PS 2.3 0180400000 20
Q 2 1312500000 50
Q 3 1312600000 50
Q 4 1312700000 50
Q 10 1313100000 20
Q 20 1399800000 20
QL 2 0297200000 100
VH 4.2 1345800000 100
VQB1.5/50 BL1633280000 5
VQB1.5/50 RT 1633290000 5
VQB1.5/50 SW 1635120000 5
WT 4 1341060000 100
SF 10 03324000001000
SG 10 03325000001000
ADP 0485400000 20
HP 4 0485860000 20
DEK 6 see “Accessories”
a #
8/91/65
8 mm/M 32)/M 2.53)/3.5 x 0.6
500 V/6.3 A/4 mm2
6 kV/3
0.5…12)/0.4…0.73)
2/1***
0.5…4
0.5…4
0.5…4
A 4 2)/A 3
3)
-/-/22...12 AWG
WCat. No. Qty.
9528110000 50
not combine with
DLI / DLA
Wemid 9532450000 50
5 x 20 without core indicator
Type Cat. No. Qty.
AP 9503330000 50
AP Wemid 9532470000 50
QB 2 0461100000 50
QB 3 0461200000 50
QB 4 0461300000 50
DEK 8 see “Accessories”
A4 A4
A4 A4
A3
158
Feed-through terminals for initiators and motors
Dimensions/approvals
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule DIN 46 228/1 mm2
Flexible H07V-K and ferrule with plastic insul. collar mm2
Plug gauge according to 60 947-7-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection, multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
PA
End plate/partition
End plate
Partial end plate for VLI1.5 – MAK2.5 combination
Partial end plate for VLI1.5 – VLI1.5PE combination
Partial end plate for VLI1.5PE – MAK2.5 combination
Cross-connection
VQB 50-pole, snap-fit, external cross-connection
QB 25-pole external cross-connection
Group marking
Tag carrier
for S 10 tags
Marking tags Print
DEK Standard
a q #
6/79/64
8 mm/M 2.5/3.5 x 0.6
250 V/17.5 A/1.5 mm2
4 kV/3
0.4…0.6**
1
0.5…4.0
0.5…2.5
0.5…4
0.5…2.5
0.5…2.5
A3
24 A/2.5 mm2
24
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
WCat. No. Qty.
1633250000 50
Type Cat. No. Qty.
AP VLI1.5 1633260000 20
TEAP 2 MAK2.5
1633330000 20
TEAP VLI1.5 1633270000 20
VQB1.5/50BL* 1633280000 5
VQB1.5/50RT* 1633290000 5
VQB1.5/50SW* 1635120000 5
T 5 0348500000 100
SF 10 03324000001000
SG 10 03325000001000
DEK 5 see “Accessories”
a q #
6/69/63
8 mm/M 2.5/3.5 x 0.6
250 V/17.5 A/1.5 mm2
4 kV/3
0.4…0.6
1
0.5…4.0
0.5…2.5
0.5…4
0.5…2.5
0.5…2.5
A3
24 A/2.5 mm2
24
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
WCat. No. Qty.
1633310000 50
Type Cat. No. Qty.
APVLI1.5/PE 1633320000 20
TEAP VLI1.5 1633270000 20
TEAP1MAK2.51633340000 20
VQB1.5/50BL* 1633280000 5
VQB1.5/50RT* 1633290000 5
VQB1.5/50SW* 1635120000 5
T 5 0348500000 100
SF 10 03324000001000
SG 10 03325000001000
DEK 5 see “Accessories”
a r #
6/88/64
8 mm/M 2.5/3.5 x 0.6
500 V (L-L)/250 V (L-PE)
24 A/2.5 mm2
6 kV/3
0.4…0.6
1
0.5…4.0
0.5…2.5
1.5…4
0.5…2.5
0.5…2.5
A3
24 A/4 mm2
24
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
WCat. No. Qty.
1615270000 50
1631650000 50
Type Cat. No. Qty.
AP MAK2.5 1615280000 20
TEAP 2 MAK2.51633330000 20
TEAP1 MAK2.51633340000 20
VQB1.5/50BL* 1633280000 5
VQB1.5/50RT* 1633290000 5
VQB1.5/50SW* 1635120000 5
QB 25 SW* 0520000000 20
QB 25 RT* 0520060000 20
QB 25 BL* 0520080000 20
T 5 0348500000 100
SF 10 03324000001000
SG 10 03325000001000
DEK 5 see “Accessories”
* When using cross-connection bridges, the connected cross-section is reduced by one level
** 0.4…0.45 for lower connection level
Mounting rails, end brackets, further marking material see “Accessories”
VLI 1.5 VLI 1.5PE MAK 2.5
WWW
159
SAK-series
Disconnect test terminal against induced high voltage
Measures to minimize risks of electric vol-
tage peaks in control systems of power
plants and transforming stations:
• Insulation between installation and con-
trol cable by pulling disconnect plugs.
• Grounding of control cable is possible on
an appropriate location of the workplace.
• Easy connection of electric isolation of
counting, control and communication cir-
cuits.
Electricity Supply Industry Standard
ESI 12-4 1973
The Electricity Supply Industry Standard
ESI 12-4 1973 defines a detailed specifica-
tion of control and protection equipment.
The main functions of thiese installations
are as follows:
• Insulation of the control cables located in
front of ground or installation lines with
increased potential, which is required to
prevent unintentional contact of service
staff with live parts.
• Separation of control cables from local
control circuits.
• Application also includes test connec-
tions for auxiliary control circuits and / or
local control circuits.
• Grounding of control cables and / or
auxiliary control circuits.
• Bundled disconnection of all auxiliary
control circuits from potential earth.
• A test voltage can be applied using the
screening connection of the control
cable, which is normally routed on the
enclosure, with the help of an appropria-
te separation. This permits to check
whether the screening line is correctly
functioning. For this test, an insulated
feed-through plate is required.
ESI 12-4:
"Terminating Equipment for Pilot Cables
subject to Induced Transient Voltages
exceeding 650 V rms".
SAKH 6
Y
15/138/79
12 mm
15 kV ac (ESI 12-4)**/30 A
0.5...10
0.5...10*
WCat. No. Qty.
PPT/35 3835020000 10
incl. disconnect plug and dis-
placement tool (if min. 10
items are ordered)
AP/PPT (3) 3835120000 10
TST/PPT 3835360000 10
PH/PPT 3835260000 10
The disconnect plug may only
be removed with the displace-
ment tool.
PS (4) 0299600000 20
StB 17 0147100000 50
TSK 35 0514300000 1
DEK 5 see “Accessories”
12 mm
1 kV ac / 1.5 kV dc / 47 A
>15 kV (from terminal to terminal)
0.5... 6
0.5... 6
WCat. No. Qty.
SAKH 6 0126600000 50
AP 0131700000 20
DEK 5 see “Accessories”
PPT/35
Dimensions/approvals
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current
Rated impulse voltage/pollution severity
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Ordering data Version
EP
End plate
EP
Disconnect plug
Displacement tool
PA
Test plug/socket
Insulated mounting rail
PVC 35 x 1.5 mm
Marking tags Print
DEK Standard
Mounting rails, end brackets, further marking material see “Accessories”
* Also two push-on tabs are possible
** mounted on an insulated mounting rail
1) Length: 300 mm* not for terminals made from PA
38.5 A / 6 mm2
a r #
60/27/30
9 mm/M 3/3.5 x 0.6
500 V/32 A/4 mm2
6 kV/3
0.5…1.0
2
0.5…6
1.5…4
0.5…4
0.5…4
0.5…4
0.2…6.0 / A 3
32
32
300V/27 A/22…12 AWG
300 V/10 A/24…12 AWG
UTS 15 Cat. No. Qty.
for test adapter1538260000100
w.mk./f.test ad.
1489360000 10
ATA1,10-pole 1633240000 5
Type Cat. No. Qty.
AP (1.5) 0294460000 20
TW (0.5) 0348260000 50
TSch 4 0363360000 100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
VL 2 0446700000 50
VH 10 0446600000 50
BS M2.5x14 0266800000 100
AD 4 0303400000 50
BSKM 2.5x18 0303300000 100
ADP 41)1378160000 10
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 6 see “Accessories”
38.5 A / 6 mm2
a r #
6/27/30
8 mm/M 3/3.5 x 0.6
400 V/32 A/4 mm2
6 kV/3
0.5…1.0
2
0.5…6
1.5…4
0.5…4
0.5…4
0.5…4
0.2…6.0 / A 3
32
32
300 V/27A/22…12 AWG
300 V/10 A/24…12 AWG
UTS 15 Cat. No. Qty.
0294320000 100
0294360000 100
0294380000 100
(10pol./no mk.)
0359560000 10
(10pol./w.mk.)
0359660000 10
AKZ4 Wemid 9537110000 100
Type Cat. No. Qty.
AP (1.5) 0294420000 20
AP (1.5) 9537910000 20
AP (1.5) 0294460000 20
AP (1.5) 0294480000 20
TW (2.0) 0118900000 20
TW (0.5) 0348260000 50
TSch 4 0363360000 100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
VL 2 0446700000 50
VH 10 0446600000 50
BS M 2.5x14 0266800000 100
AD 4 0303400000 50
BSK M2.5x18 0303300000 100
ADP 41)1378160000 10
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 6 see “Accessories”
160
21.5 A / 2.5 mm2
a r #
5/25/25
7 mm/M 2.5/3.0 x 0.5
250 V/17.5 A/1.5 mm2
4 kV/3
0.4…0.6
1
0.5…2.5
1.5
0.5…1.5
0.5…1.5
0.5…1.5
0.2…2.5 / A 1
24
24
150 V/15 A/22…14 AWG
300 V/10 A/24…16 AWG
UTS 15 Cat. No. Qty.
0340460000 100
0340480000 100
(10pol./no mk.)
0358060000 10
(
10pol./w.mk.)
0358160000 10
Type Cat. No. Qty.
AP (1.5) 0340560000 50
Q 2 0368200000 50
Q 3 0368300000 50
Q 4 0368400000 50
Q 5 0660300000 20
Q 10 0368500000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 5 see “Accessories”
26 A / 4 mm2
a r #
5/25.5/28
7 mm/M 2.5/3.0 x 0.5
250 V/24 A/2.5 mm2
4 kV/3
0.4…0.6
1
0.5…4
1.5…2.5
0.5…4
0.5…2.5
0.5…2.5
0.13…4.0 / A 3
24
24
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
UTS 15 Cat. No. Qty.
(with pin) 0697160000 100
(with pin) 0697180000 100
(without pin) 0175960000 100
AKZ 2.5 w. AP
0385860000 50
Type Cat. No. Qty.
AP (2.5) 0697360000 50
AP (2.5) 0697380000 50
TW (1.5) 0318560000 20
TW (1.5) 0318580000 20
Q 2 0368200000 50
Q 3 0368300000 50
Q 4 0368400000 50
Q 5 0660300000 20
Q 10 0368500000 20
Marking tags can be snapped
on via cross-connection
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 5 see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
Max. technical data
Dimensions/approvals
Width/length/height (mm) with TS 15 U
Insulation stripping length/clamping screw/screwdriver blade
Rated data VDE 0611 Part 1/8.92/IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage / pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule DIN 46 228/1 mm2
Flexible H07V-K and ferrule with plastic insul. collar mm2
Max. clamping range in mm
2
/plug gauge acc. to IEC 60 947-1 Size
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Type
KrG
PA
Blue PA
PA
PA
End plate (thickness mm)
KrG
Wemid
PA
Blue PA
Partition (thickness mm)
KrG
PA
Blue PA
Small partition
PA
Cross-connection
Q 2 QB 4
Switchable cross-connection link
VL BS VH
Cover/Profiled material for covers for finger-safety*
Test plug/socket
Plug test socket
can be used without QL
Marking tags Print
DEK Standard
StB
PS
K sleeve
UUU
AKZ 1.5
AKZ 1.5/10 AKZ 2.5 AKZ 4
AKZ 4/10
AKZ 4 Wemid
AKZ 4 for test adapter
AKZ 4/10 for test adapter
Feed-through terminals
Protective conductor terminals
Fuse terminals
Disconnect test terminals
Rail mounting TS 15
SAK-series
161
Rail mounting TS 15
a r
7/32/34
9 mm/M 3/3.5 x 0.6
IEC 60 947-7-2
–/–/4 mm2
8 kV/3
0.5…1.0
2
0.5…6
1.5…4
0.5…4
0.5…2.5
0.5…2.5
0.13…4.0 / A 3
–/–/22…12 AWG
–/–/26…12 AWG
UTS 15 Cat. No. Qty.
0380260000 100
(green/yellow)
Type Cat. No. Qty.
DEK 6.5 see “Accessories”
r
7/27.5/30
9 mm/M 3/3.5 x 0.6
–/–/4 mm2
0.8…1.6
3
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.5…4.0 / A 3
–/–/22…14 AWG
UTS 15 Cat. No. Qty.
0211200000 50
Type Cat. No. Qty.
38.5 A / 6 mm2
a r
60/32/34
9 mm/M 3/3.5 x 0.6
690 V/32 A/4 mm2
8 kV/3
0.5…1.0
2
0.5…6
1.5…4
0.5…4
0.5…4
0.5…4
0.2…6.0 / A 3
20
20
UTS 15 Cat. No. Qty.
0489560000 100
(10pol./no mk.)0366560000 10
(10pol./w.mk.) 0469560000 10
Type Cat. No. Qty.
BB 3 (8.0) 0366660000 50
combined AP + end brackets
TW/AP (1.5) 1331760000 20
TSch 4 0363360000 100
Q 2 0369000000 50
Q 3 0369100000 50
Q 4 0369200000 50
Q 10 0369300000 20
AD 4 0303400000 50
BSK M 2.5x18 0303300000 100
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 6 see “Accessories”
a r
5/28/27
7 mm/M 2.5/3.0 x 0.5
IEC 60 947-7-2
–/–/2.5 mm2
4 kV/3
0.4…0.6
1
0.5…4
1.5…2.5
0.5…4
0.5…2.5
0.5…2.5
0.13…4.0 / A 3
–/–/26…12 AWG
–/–/26…12 AWG
UTS 15 Cat. No. Qty.
1303360000 100
(green/yellow)
Type Cat. No. Qty.
DEK 5 see “Accessories”
a r
8/58/34
9 mm/M 3/3.5 x 0.6
500 V/6.3 A*/4 mm2
6 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…2.5
0.5…2.5
0.13…4.0 / A 3
(QB 2…4) 10
300 V/10 A/22…12 AWG
300 V/6.3 A/26…12 AWG
UTS 15 Cat. No. Qty.
0376860000 100
5 x 20 without indicator
Type Cat. No. Qty.
AP (1.5) 0380360000 20
QB21) insul. 0461100000 50
QB 31) insul. 0461200000 50
QB 41) insul. 0461300000 50
K sleeve 0553300000 100
DEK 6.5 see “Accessories”
3-pole ganging with tag bar
SchS 2, snapped onto three
disconnect levers
(Cat. No. 0337400000)
6.5/42/45
8 mm/M 3/3.5 x 0.6
400 V2)/10 A/4 mm2
6 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.13…4.0 / A 3
(QB 2…4) 10
UTS 15 Cat. No. Qty.
with 2 StB 0412860000 100
w. clamp.screw
0412760000 100
Type Cat. No. Qty.
AP (1.5) 0211360000 20
QB 21) insul. 0482700000 50
QB 31) insul. 0482800000 50
QB 41) insul. 0482900000 50
QB 251) blank0134000000 20
PS 2.3 0180400000 20
DEK 6.5 see “Accessories”
1) The conductor cross-section is
reduced to max. 2.5 mm2
when QB is used.
2) As disconnect test terminal:
rated voltage 250 V
* With contact sleeve 19 A
UUUUU
AK 4
AK 4/10 AKE 2.5 AKE 4 AKE 4 MS ASK 1
Fuse terminal SAKR
Isolating blade terminal with 2
sockets or
with 2 clamping screws
162
a r
6/28.5/30.5
400 V/8 A/2.5/1 mm2
6 kV/3
Tab connec. 6.3 and 2.8 mm
20
20
150 V/10 A/22…12 AWG
300 V/10 A/24…12 AWG
UTS 15 Cat. No. Qty.
0324560000 100
Type Cat. No. Qty.
AP (1.5) 0294460000 20
TW (0.5) 0348260000 50
Q 2 0369000000 50
Q 3 0369100000 50
Q 4 0369200000 50
Q 10 0369300000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
IH 2.8 0386060000 100
IH 6.3 0386260000 100
DEK 6 see “Accessories”
a r
6/28.5/30.5
400 V/8 A/1 mm2
6 kV/3
Tab connection 2.8 mm
20
20
150 V/10 A/22…12 AWG
300 V/10 A/24…12 AWG
UTS 15 Cat. No. Qty.
0362460000 100
Type Cat. No. Qty.
AP (1.5) 0294460000 20
TW (0.5) 0348260000 50
Q 2 0369000000 50
Q 3 0369100000 50
Q 4 0369200000 50
Q 10 0369300000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
IH 2.8 0386060000100
DEK 6 see “Accessories”
a r
6/27/30
9 mm/M 3/3.5 x 0.6
400 V/8 A/4/1 mm2
6 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.2...4/A 3
20
20
150 V/20 A/22…12 AWG
300 V/10 A/24…12 AWG
UTS 15 Cat. No. Qty.
0324460000 100
Type Cat. No. Qty.
AP (1.5) 0294460000 20
TW (0.5) 0348260000 50
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
VL 2 0446700000 50
VH 10 0446600000 50
BS M 2.5x14 0266800000 100
StB 8.5 0215700000 50
PS 2.3 0180400000 20
IH 2.8 0386060000 100
DEK 6 see “Accessories”
r
6/27/30
9 mm/M 3/3.5 x 0.6
400 V/8 A/4/1 mm2
6 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.2...4/A 3
20
20
300 V/10 A/24…12 AWG
UTS 15 Cat. No. Qty.
0158760000 100
Type Cat. No. Qty.
AP (1.5) 0294460000 20
TW (0.5) 0348260000 50
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
VL 2 0446700000 50
VH 10 0446600000 50
BS M 2.5x14 0266800000 100
StB 8.5 0215700000 50
PS 2.3 0180400000 20
IH 2.8 0386060000 100
IH 6.3 0386260000 100
DEK 6 see “Accessories”
Dimensions/approvals
Width/length/height (mm) with TS 15 U
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage*/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule DIN 46 228/1 mm2
Flexible H07V-K and ferrule with plastic insul. collar mm2
Max. clamping range in mm
2
/plug gauge acc. to IEC 60 947-1 Size
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Type
KrG
PA
Blue PA
PA
End plate (thickness mm)
PA
PA
Blue PA
HP
HP
BB
Partition (thickness mm)
PA
HP
HP
Small partition
Cross-connection
Switchable cross-connection link
VL BS VH
Test plug/socket
StB Plug test socket ø 2.3
PS
Cover
Insulation sleeves
Marking tags Print
DEK Standard
Mounting rails, end brackets, further marking material see “Accessories”
* Insulation sleeves are to be used for tab connections to maintain the rated voltage.
UUUU
AKZ 4 SS AKZ 4 SS AKZ 4 S AKZ 4 SFTab connection
Solder connection
Feed-through terminals for TS 15
SAK-series
163
Feed-through terminals for TS 15
6.5/32/21
400 V/16 A/1 mm2
6 kV/3
0.5…1
0.5…1
UTS 15 Cat. No. Qty.
0137320000100
Type Cat. No. Qty.
EP (1.0) 0164100000100
EP(1.0 tropi. pr.) 0164500000100
TW (0.5) 0166800000 50
DEK 6.5 see “Accessories”
a r
6/44/30
250 V/16 A/1.5 mm2
4 kV/3
0.5…1.5
1.5
0.5…1.5
0.2…2.5 / -
20
20
300 V/20 A/22…12 AWG
300 V/10 A/24…12 AWG
UTS 15 Cat. No. Qty.
0346460000 100
Type Cat. No. Qty.
AP (1.5) 0294460000 20
TW (0.5) 0348260000 50
TSch 4 0363360000 100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
VL 2 0446700000 50
VH 10 0446600000 50
BS M 2.5x14 0266800000 100
StB 8.5 0215700000 50
PS 2.3 0180400000 20
AD 4 0303400000 50
BSK M 2.5x18 0303300000 100
DEK 6 see “Accessories”
r
5/34.5/25
7 mm / M 2.5 / 3.0 x 0.5
250 V/16 A/1.5 mm2
4 kV/3
0.4…0.7
1
0.5…2.5
1.5
0.5…1.5
0.5…1.5
0.5…1.5
0.2…2.5 / A 1
24
24
150 V/10 A/24…16 AWG
UTS 15 Cat. No. Qty.
0340160000 100
Type Cat. No. Qty.
AP (1.5) 0329660000 20
TW (0.5) 0166800000 50
Q 2 0368200000 50
Q 3 0368300000 50
Q 4 0368400000 50
Q 10 0368500000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 5 see “Accessories”
a r
6/35.5/30
9 mm / M 3 / 3.5 x 0.6
250 V/16 A/4/1.5 mm2
4 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.2...4.0 / A 3
20
20
300 V/20 A/22…12 AWG
300 V/10 A/24…12 AWG
UTS 15 Cat. No. Qty.
0334820000100
0334860000100
Type Cat. No. Qty.
AP (1.5) 0294420000 20
AP (1.5) 0294460000 20
AP (1.5) 0294480000 20
TW (0.5) 0348260000 50
TSch 4 0363360000 100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
VL 2 0446700000 50
VH 10 0446600000 50
BS M2.5 x14 0266800000 100
StB 8.5 0215700000 50
PS 2.3 0180400000 20
AD 4 0303400000 50
BSK M 2.5x18 0303300000 100
DEK 6 see “Accessories”
UUUU
AKZ 1.5 L AKZ 4 LAL 1 AKZ 4 LL
164
Feed-through terminals for TS 15
a r
5/25/45
0.8 x 1.6
7 mm/M 2.5/3.0 x 0.5
125 V/8 A/1.5 mm2
2.5 kV/3
0.4…0.7
1
0.5…2.5
1.5
0.5…1.5
0.5…1.5
0.5…1.5
0.13...2.5 / A1
24
24
300 V/10 A/26…14 AWG
300 V/10 A/24…16 AWG
Type Cat. No. Qty.
AKZ 1.5 T 0442560000 100
AKZ 1.5 T 0357960000 100
AKZ 1.5 W 0329460000 100
AP (1.5) 0340560000 50
Q 2 0368200000 50
Q 3 0368300000 50
Q 4 0368400000 50
Q 10 0368500000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 5 see “Accessories”
a
5/25/39.5
1 x 1
7 mm/M 2.5/3.0 x 0.5
125 V/8 A/1.5 mm2
2.5 kV/3
0.4…0.7
1
0.5…2.5
1.5
0.5…1.5
0.5…1.5
0.5…1.5
0.13...2.5 / A1
24
24
300 V/10 A/26…14 AWG
Type Cat. No. Qty.
AKZ 1.5 T 0483660000 100
AKZ 1.5 T 0357860000 100
AP (1.5) 0340560000 50
Q 2 0368200000 50
Q 3 0368300000 50
Q 4 0368400000 50
Q 10 0368500000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 5 see “Accessories”
Dimensions/approvals
Width/length/height (mm) with TS 15 U
Pin size
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule DIN 46 228/1 mm2
Flexible H07V-K and ferrule with plastic insul. collar mm2
Max. clamping range in mm
2
/plug gauge acc. to IEC 60 947-1 Size
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Pin versions
0.6 x 0.6
1.0 x 1.0
0.8 x 1.6 horizont.
0.8 x 1.6 vertical
Mounting, Mounting, 0.8 x 2.4 horizontal
horizontal vertical 0.8 x 2.4 vertical
End plate (thickness mm)
PA
Partition (thickness mm)
PA
Small partition
Cross-connection
2-pole
3-pole
4-pole
10-pole
Q 3
Switchable cross-connection link
VL BS VH
Test plug/socket
StB Plug test socket ø 2.3
PS
Marking tags Print
DEK Standard
*
a r
5/28/44
0.8 x 1.6
7 mm/M 2.5/3.0 x 0.5
125 V/8 A/1.5 mm2
2.5 kV/3
0.4…0.7
1
0.5…2.5
1.5
0.5…1.5
0.5…1.5
0.5…1.5
0.13...2.5 / A1
24
24
300 V/10 A/26…14 AWG
300 V/10 A/24…16 AWG
Type Cat. No. Qty.
AKZ 1.5 T 0400460000 100
AKZ 1.5 T 0400360000 100
AP (1.5) 0340560000 50
Q 2 0368200000 50
Q 3 0368300000 50
Q 4 0368400000 50
Q 10 0368500000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 5 see “Accessories”
a r
5/26/46.7
0.8 x 1.6
7 mm/M 2.5/3.0 x 0.5
125 V/10 A/2.5 mm2
2.5 kV/3
0.4…0.6
1
0.5…4
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.13...4.0 / A3
24
24
300 V/10 A/26…14 AWG
300 V/10 A/26…10 AWG
Type Cat. No. Qty.
AKZ 2.5 K 0696260000100
AP (2.5) 0697260000 50
TW (1.5) 0318560000 20
Q 2 0368200000 50
Q 3 0368300000 50
Q 4 0368400000 50
Q 10 0368500000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 5 see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
UUU
AKZ 1.5 T AKZ 1.5 T AKZ 1.5 T AKZ 2.5 KSolder connection
Spring-clip connection
acc. to DIN 41611 Part 4
Wrap connection
acc. to DIN/IEC 352 Part 1
U
* 035786 = 45 mm
SAK-series
165
Feed-through terminals for TS 15
a r
6/27/48.5
1 x 1
9 mm/M 3/3.5 x 0.6
250 V/10 A/4 mm2
4 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.13...4.0 / A3
20
20
300 V/10 A/26…14 AWG
300 V/10 A/24…12 AWG
Type Cat. No. Qty.
AKZ 4 T 0445860000 100
AP (1.5) 0294460000 20
TW (1.5) 0348260000 50
TSch 4 0363360000 100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
VL 2 0446700000 50
VH 10 0446600000 50
BS M 2.5 x14 0266800000 100
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 6 see “Accessories”
a r
6/27/50.5
0.8 x 1.6
9 mm/M 3/3.5 x 0.6
250 V/10 A/4 mm2
4 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.13...4.0 / A3
20
20
300 V/10 A/26…14 AWG
300 V/10 A/24…12 AWG
Type Cat. No. Qty.
AKZ 4 T 0344160000 100
AKZ 4 T 0344060000 100
AP (1.5) 0294460000 20
TW (1.5) 0348260000 50
TSch 4 0363360000 100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
VL 2 0446700000 50
VH 10 0446600000 50
BS M 2.5 x14 0266800000 100
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 6 see “Accessories”
a r
5/26/46.7
0.8 x 1.6
7 mm/M 2.5/3.0 x 0.5
250 V/8 A/2.5 mm2
4 kV/3
0.4…0.6
1
0.5…4
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.13...4.0 / A3
24
24
300 V/10 A/26…14 AWG
300 V/10 A/26…10 AWG
Type Cat. No. Qty.
AKZ 2.5 K 0695460000 100
AKZ 2.5 K 0695660000 100
AP (2.5) 0697260000 50
TW (1.5) 0318560000 20
Q 2 0368200000 50
Q 3 0368300000 50
Q 4 0368400000 50
Q 10 0368500000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 5 see “Accessories”
a r
5/47.5/27
0.8 x 1.6
7 mm/M 2.5/3.0 x 0.5
250 V/8 A/2.5 mm2
4 kV/3
0.4…0.6
1
0.5…4
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.13...4.0 / A3
24
24
300 V/10 A/26…14 AWG
300 V/10 A/26…10 AWG
Type Cat. No. Qty.
AKZ 2.5 K 0695960000 100
AKZ 2.5 K 0696160000 100
AP (2.5) 0697260000 50
TW (1.5) 0318560000 20
Q 2 0368200000 50
Q 3 0368300000 50
Q 4 0368400000 50
Q 10 0368500000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 5 see “Accessories”
a r
6/27/57,8
0.8 x 2.4
9 mm/M 3/3.5 x 0.6
250 V/10 A/4 mm2
4 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.13...4.0 / A3
20
20
300 V/10 A/26…14 AWG
300 V/10 A/24…12 AWG
Type Cat. No. Qty.
AKZ 4 T 0366460000 100
AKZ 4 T 0461660000 100
AP (1.5) 0294460000 20
TW (1.5) 0348260000 50
TSch 4 0363360000 100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
VL 2 0446700000 50
VH 10 0446600000 50
BS M 2.5 x14 0266800000 100
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 6 see “Accessories”
r
6/27/50.2
0.8 x 1.6
–
250 V/10 A/2.5 mm2
4 kV/3
0.5...2.5 / -
20
20
300 V/10 A/24…12 AWG
Type Cat. No. Qty.
AKZ 4 ST 0439260000 100
AP (1.5) 0294460000 20
TW (1.5) 0348260000 50
Q 2 0369000000 50
Q 3 0369100000 50
Q 4 0369200000 50
Q 10 0369300000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 6 see “Accessories”
UUUUUU
AKZ 2.5 K AKZ 2.5 K AKZ 4 T AKZ 4 T AKZ 4 T AKZ 4 ST
Thermocouple, type J
Thermocouple acc. to IEC 584 (DIN 43 710)
Busbar
Constantan (CuNi)
Iron (Fe)
Weidmüller’s thermocouple terminals are
specially designed for transmitting the
smallest voltages in temperature measu-
ring circuits. Special busbars ensure that
no false signals occur in the terminal when
temperature differences exist in the positi-
ve and negative path. This high measuring
precision is necessary for, e.g. test beds
for aircraft engines, for complicated chemi-
cal processes, control systems, etc.
•Busbar material corresponds to thermal
and compensating conductors
•Clear thermocouple marking
•2-pole blocks per thermocouple
•Row width 14 mm, incl. end plate
Configuration of a temperature mea-
suring circuit
1 Thermocouple (sensor) 4 Reference point
2 Thermocouple terminals 5 Supply conductors (to
and from)
3 Compensating conductor 6 Measuring device
The thermocouple terminals displayed in
this measurement circuit are used to ther-
mo-electrically transmit thermal e.m.f. of
the thermocouple to the reference point
and indicating device. Thermocouple ter-
minals are required for the construction of
temperature measuring circuits.
166
Feed-through terminals for TS 15
AKZ 4/TC
Dimensions
Width/length/height (mm) with TS 15 U
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule DIN 46 228/1 mm2
Flexible H07V-K and ferrule with plastic insul. collar mm2
Plug gauge acc. to IEC 60 947-1 Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A
Ordering data Version
for thermocouples Type J Fe – CuNi
Acc. to IEC 584 Type T Cu – CuNi
(DIN 43710) Type K NiCr – Ni
Type E NiCr – CuNi
End plate
AP (thickness 1.5 mm) PA
Partition
TW (thickness 0.5 mm) PA
Marking tags Print
Material V0
14/27/30
9 mm/M 3/3.5 x 0.6
–/–/4 mm2
0.5…1
2
0.5…4
1.5…4
0.5…4
0.5…2.5
0.5…2.5
A 3
UTS 15 Cat. No. Qty.
1627010000 20
on demand
1677130000 20
on demand
Cat. No. Qty.
0294460000 20
0348260000 50
DEK 5/6 1789590000 500
Mounting rails, end brackets, further marking material see “Accessories”
U
for temperature measuring
circuits
SAK-series
167
Multipole terminal blocks
Dimensions/approvals
Width/length/height (mm)
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule DIN 46 228/1 mm2
Flexible H07V-K and ferrule with plastic insul. collar mm2
Max. clamping range in mm
2
/plug gauge acc. to IEC 60 947-1 Size
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
2-pole
3-pole
4-pole
4-pole
6-pole
6-pole
8-pole
8-pole
10-pole
12-pole
12-pole
14-pole
16-pole
Soldering strip/expansion rivet
Marking strips
printed
1 ...
unprinted
80
103
85.5
18.5 8.5 10
a r
86/15/15
5 mm/M 2.5/3.5 x 0.6
125 V/24 A/2.5 mm2
2.5 kV/3
0.4…0.45
1
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.2…4.0 / A 2
300 V/10 A/24…12 AWG
300 V/10 A/24…12 AWG
Type Cat. No. Qty.
MK 2/12 PA 0241260000 50
MF 2/12 0241760000 50
SN 0200100000500
BSTb 28/12 0245700000 50
bottom
BSTb 28/12 0278500000 50
top
BSTo 28/12 0245600000 50
a r
88.5/13.5/12
6 mm/M 2.5/3.5 x 0.6
125 V/24 A/2.5 mm2
2.5 kV/3
0.4…0.45
1
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.2…4.0 / A 2
150 V/25 A/22…12 AWG
300 V/10 A/24…12 AWG
Type Cat. No. Qty.
MK10/14 PA 0370160000 20
other numbers on request
The MK 10/14 can be
mounted with glue or with
M 3 x 12* screws through the
empty terminal point aperture
*DIN EN ISO 1207
a r
110/15/16.1
5 mm/M 2.5/3.5 x 0.6
400 V/24 A/2.5 mm2
6 kV/3
0.4…0.45
1
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.2…4.0 / A 2
300 V/25 A/22…12 AWG
300 V/25 A/22…12 AWG
Type Cat. No. Qty.
MK 3/2 KrG 0273820000100
MK 3/3 KrG 0273920000 50
MK 3/4 KrG 0274020000 50
MK 3/6 KrG 0274220000 50
MK 3/8 KrG 0274420000 25
MK 3/10 KrG 0274620000 20
MK 3/12 KrG 0243520000 20
BSTb 28/12 0245900000 50
BSTb 28/8 0290200000 50
BSTb 28/6 0290000000 50
BSTb 28/4 0289800000 50
BSTo 28/12 0245800000 50
BSTo 28/8 0284700000 50
BSTo 28/6 0289500000 50
BSTo 28/4 0289300000 50
Printed on top on request
a r
103/17/16
5 mm/M 2.5/3.5 x 0.6
400 V/24 A/2.5 mm2
6 kV/3
0.4…0.45
1
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.2…4.0 / A 2
150 V/20 A/22…12 AWG
150 V/15 A/22…12 AWG
Type Cat. No. Qty.
MK4/16KrG 0244220000 20
BSTb 28/16 0262200000 50
bottom
BSTb 28/16 0278700000 50
top
BSTo 28/16 0262100000 50
Screw connection MK 10/14MK 2/12 MK 3/12 MK 4/16
168
Multipole terminal blocks
40/18/15.5
5 mm/M 2.5/3.5 x 0.6
500 V/24 A/2.5 mm2
6 kV/3
0.4…0.45
1
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.2…4.0 / A 2
Type Cat. No. Qty.
MK 5/2 KrG 0243820000100
Cover
D2(forMK 5/2)0244060000 50
Cover
a r
see table below
8 mm/M 3/4.0 x 0.8
500 V/24 A/2.5 mm2
6 kV/3
0.5…0.7
2
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.2
0.2…4.0 / A 2
300 V/20 A/22…12 AWG
300 V/25 A/24…12 AWG
Type Cat. No. Qty.
KS 2 KrG2)0134420000100
KS 4 KrG2)0140320000 50
KS 6 KrG2)0140620000 50
KS 10 KrG2)0141620000 20
Cover
D2 (for KS 2) 0134500000100
D4 (for KS 4) 0140500000 50
D6 (for KS 6) 0140800000 50
D10 (for KS10) 0141800000 20
Marking tag cover
Dimensions
Type a b
KS 2 42 32
KS 4 66 56
KS 6 90 80
KS 10 138 128
ELSb 2 0143200000 50
ELSb 4 0143300000 50
ELSb 6 0143400000 50
ELSb 10 0143500000 50
ELSo 2 0142800000 50
ELSo 4 0142900000 50
ELSo 6 0143000000 50
ELSo 10 0143100000 50
a r i#
see table below
8 mm/M 3/4.0 x 0.8
400 V/32 A/4 mm2
6 kV/3
0.5…0.7
2
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.33…4.0 / A 3
300 V/10 A/22…12 AWG
300 V/10 A/22…12 AWG
Type Cat. No. Qty.
BK 2 KrG 0624720000 50
BK 3 KrG 0624920000 50
BK 4 KrG 0625120000 50
BK 6 KrG 0625220000 50
BK 12 KrG 0625320000 50
Dimensions
Type a b
BK 2 20 –
BK 3 31 11
BK 4 38 18
BK 6 52 32
BK 12 92 72.5
SN 0200100000 500
BSTb 28/2 0203600000 50
BSTb 28/3 0203800000 50
BSTb 28/4 0197300000 50
BSTb 28/6 0197500000 50
BSTb 28/12 0198800000 50
BSTo 28/2 0203500000 50
BSTo 28/3 0203700000 50
BSTo 28/4 0197200000 50
BSTo 28/6 0197400000 50
BSTo 28/12 0198700000 50
a r
see table below
9 mm/M 4/4.0 x 0.8
690 V/41 A/6 mm2
8 kV/3
1.2…2.0
4
0.5…6
1.5…6
0.5…6
0.5…4
0.5…4
0.33…6.0 / A 3
300 V/30 A/22…10 AWG
300 V/40 A/22…10 AWG
Type Cat. No. Qty.
MK 6/2 KrG 0620420000 50
MK 6/3 KrG 0620320000 50
MK 6/4 KrG 0620220000 20
MK 6/6 KrG 0620120000 20
Dimens. Length/attach.dim.
Type KRG
MK 6/2 23.5
MK 6/3 36.5 13
MK 6/4 49.5 26
MK 6/6 75.5 52
BSTb 17/6 0304600000 50
Dimensions/approvals
Width/length/height (mm)
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule DIN 46 228/1 mm2
Flexible H07V-K and ferrule with plastic insul. collar mm2
Max. clamping range in mm
2
/plug gauge acc. to IEC 60 947-1 Size
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Versions
2-pole
3-pole
4-pole
4-pole
6-pole
6-pole
8-pole
8-pole
10-pole
12-pole
12-pole
Expansion rivet
Marking strips
printed
1 …
unprinted
1)Projecting length = 1 mm. To be considered for the last terminal in a row!
Printed on top on request
2)Please order cover and marking strips separately.
Cover D 2
(for MK 5/2)
Cover D 4
(for KS 4)
Screw/tab connection MK 5/2 KS 2…10 BK 2…12 MK 6/2…6/6
Mounting rails, end brackets, further marking material see “Accessories”
Max. technical data
Dimensions/approvals
Width/length/height (mm)
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage*/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule DIN 46 228/1 mm2
Flexible H07V-K and ferrule with plastic insul. collar mm2
Max. clamping range in mm
2
/plug gauge acc. to IEC 60 947-1 Size
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data
PA
Expansion rivet/insulation sleeve
IH
Cover/marking strips
SAK-series
169
Multipole terminal blocks
a r
see below
8 mm/M 3.5/4.0 x 0.8
400 V*/16 A/4 mm2
6 kV/3
0.8…1.6
3
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.33...4.0 / A 3
300 V/10 A/22…10 AWG
Type Cat. No. Qty.
SLS 2/2 KrG 0213420000100
SLS 2/4 KrG 0240420000 50
SLS 2/4 KrG 0480320000 50
Slotted
IH 2.8 0386060000 100
IH 6.3 0386260000 100
2) Single tab
3) Double tab
MF 1/6…1/12 SLS 2/2
SLS 2/4
Mounting rails, end brackets, further marking material see “Accessories”
* Insulation sleeves are to be used for tab connections to maintain
the rated voltage.
a r
see below
400 V*/16 A/2.5/1 mm2
6 kV/3
300 V/10 A/24…12 AWG
300 V/10 A/22…10 AWG
Type Cat. No. Qty.
MF 1/6 KrG2)0479720000100
MF 1/6 KrG3)0480020000100
MF 1/8 KrG2)0479820000 50
MF1/8 KrG3)0480120000 50
MF1/12 KrG2)0479920000 50
MF1/12 KrG3)0480220000 50
Dimensions
Type a b c d
MF 1/6 52 34 9.5 6.5
MF 1/8 68 50 9.5 6.5
MF 1/12 113+0.5 102 8 7.5
IH 2.8 0386060000 100
IH 6.3 0386260000 100
SN 0200100000500
BSTb 10/6 0240900000 50
BSTb 10/8 0241100000 50
BSTb 10/12 0209500000 50
BSTo 10/6 0240800000 50
BSTo 10/8 0241000000 50
BSTo 10/12 0209400000 100
170
MKL 2/12 MF 2/12 MKL 3/12 MKL 4/16
Dimensions/approvals
Width/length/height (mm)
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage*/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule DIN 46 228/1 mm2
Flexible H07V-K and ferrule with plastic insul. collar mm2
Max. clamping range in mm
2
/plug gauge acc. to IEC 60 947-1 Size
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Versions
Horizontal 2-pole
Other number of poles on demand 4-pole
6-pole
12-pole
16-pole
Vertical 2-pole
Other number of poles on demand 4-pole
6-pole
12-pole
16-pole
double-sided 2.8x0.8
single-sided 0.8 x 1.6/2.8x0.8
Expansion rivet/insulation sleeve
IH
Marking strips
printed
1 …
unprinted
0241860000
0241760000
0243620000
0249920000
0262020000
0244320000
Mounting rails, end brackets, further marking material see “Accessories”
* Insulation sleeves are to be used for tab connections to maintain
the rated voltage.
1) Rated voltage 250 V
Screw, solder, tab connection
a r
103/24/16.5
5mm/M 2.5/3.5 x 0.6
400 V/20 A/2.5/1.5/1 mm2
6 kV/3
0.4…0.45
1
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.33...4.0 / A 2
300 V/25 A/22…12 AWG
150 V/15 A/22…12 AWG
Type Cat. No. Qty.
MKL4/16 KrG 02620200001)20
MKL 4/16 KrG 0244320000 20
BSTb 28/16 0262200000 50
bottom
top
BSTo 28/16 0262100000 50
a r
110/23/16
5mm/M 2.5/3.5 x 0.6
400 V*/20 A/2.5/1.5/1 mm2
6 kV/3
0.4…0.45
1
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.33...4.0 / A 2
300 V/25 A/22…12 AWG
300 V/25 A/22…12 AWG
Type Cat.No. Qty.
MKL3/2 KrG 0274920000**10 0
MKL 3/4KrG 0275120000**10 0
MKL 3/6 KrG 0275320000** 50
MKL 3/12KrG 0243620000** 20
MKL 3/2 KrG 0276020000* 100
MKL 3/6KrG 0276420000* 50
MKL3/12KrG 0249920000* 20
* For terminals directly moun-
ted next to each other, the
rated voltage is reduced to
250 V.
** Rated voltage 250 V. For
terminals directly mounted
next to each other, the rated
voltage is reduced to 125 V.
BSTb 28/4 0289800000 50
BSTb 28/6 0290000000 50
BSTb 28/12 0245900000 50
BSTo 28/4 0289300000 50
BSTo 28/6 0289500000 50
BSTo 28/12 0245800000 50
75/24/6
5 mm
63 V/17.5 A/1.5/1 mm2
1.5 kV/3
Type Cat. No. Qty.
MF 2/12 PA 0241860000 50
MF 2/12 PA 0241760000 50
IH 2.8 0386060000100
88/23/15
5 mm/M 2.5/3.5 x 0.6
125 V/20 A/2.5/1.5/1 mm2
2.5 kV/3
0.4…0.45
1
0.5…2.5
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.2...2.5 / A 2
Type Cat. No. Qty.
MKL 2/12 PA 0241360000 50
SN 0200100000 500
BSTb 28/12 0245700000 50
bottom
top 0278500000 50
BSTo 28/12 0245600000 50
Multipole terminal blocks
SAK-series
171
AKB 4
a r
8/58/30.5
–
9 mm/M 3/3.5 x 0.6
500 V/6.3 A*/4 mm2
6 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…2.5
0.5…2.5
0.13...4.0 / A3
(QB 2…4) 10
300 V/10 A/22…12 AWG
300 V/6.3 A/26…12 AWG
Type Cat. No. Qty.
ASK 1 PA 0376960000 100
(for G fuse inserts
5x 20 without indicator)
AP (1.5) 0380360000 20
QB 21)0461100000 50
QB 31)0461200000 50
QB 41)0461300000 50
K sleeve 0553300000100
DEK 6.5 see “Accessories”
1) The conductor cross-section is reduced to max. 2.5 mm2
when QB is used. * With contact sleeve 19 A
K sleeve
Max. technical data
Dimensions/approvals
Width/length/height (mm)
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule DIN 46 228/1 mm2
Flexible H07V-K and ferrule with plastic insul. collar mm2
Max. clamping range in mm
2
/plug gauge acc. to IEC 60 947-1 Size
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data
PA
Blue PA
End plate/attachment bracket (thickness mm)
AP PA
Blue PA
Partition (thickness mm)
Small partition
Cross-connection
Q 3 QB 4
Switchable cross-connection link
VL BS VH
Test plug/socket
PS StB
Cover/contact sleeve
Marking tags Print
DEK Standard
32 A / 4 mm2
a r
6/27/23
–
9 mm/M 3/3.5 x 0.6
400 V/32 A/4 mm2
6 kV/3
0.5…1.0
2
0.5…6
1.5…4
0.5…4
0.5…4
0.5…4
0.33...4.0 / A3
32
32
300/250 V/27 A/22…12 AWG
300 V/10 A/22…12 AWG
Type Cat. No. Qty.
AKB 4 PA 0321560000 100
0321580000 100
Direct mounting with BB 1
please order separately
BB 1 (7) 0320560000 50
BS M 3 x 15 0359000000 100
TW PA (0.5) 0348260000 50
TSch 4 0363360000100
Q 2 0336400000 50
Q 3 0336500000 50
Q 4 0336600000 50
Q 10 0368600000 20
VL 2 0446700000 50
VH 10 0446600000 50
BS M 2.5x 14 0266800000100
StB 8.5 0215700000 50
PS 2.3 0180400000 20
AD 4 0303400000 50
BSK M2.5x18 0303300000 100
DEK 6 see “Accessories”
26 A / 2.5 mm2
a r
5/25.5/26.5
–
7 mm/M 2.5/3 x 0.5
250 V/24 A/2.5 mm2
4 kV/3
0.4…0.6
1
0.5…4
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.13...4.0 / A3
24
24
300 V/10 A/22…12 AWG
300 V/10 A/26…10 AWG
Type Cat. No. Qty.
AKZ 2.5 0697160000100
AKZ 2.5 0697180000 100
Direct mounting with BB 4
please order separately
BB 4 (7.5) 0697560000 50
AP (2.5) 0697360000 50
AP (2.5) 0697380000 50
Q 2 0368200000 50
Q 3 0368300000 50
Q 4 0368400000 50
Q 10 0368500000 20
StB 8.5 0215700000 50
PS 2.3 0180400000 20
DEK 5 see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
For fixing the screws of ASK 1
please use
M 3 x ... DIN EN. ISO 1207 or
M 3 x ... DIN EN, ISO 1580
Screw, solder, tab
connection
Modular design
AKZ 2.5 ASK 1
Multipole terminal blocks
172
a r
6/20/31
7,8
9 mm/M 2.5/3.5 x 0.6
400 V/20 A/2.5/1.5 mm2
6 kV/3
0.4
1
0.5…2.5
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.13...2.5 / A2
10
300 V/20 A/26…12 AWG
300 V/10 A/24…12 AWG
Cat. No. 1.5 Qty.
0300720000 100
Type Cat. No. Qty.
AP (3) 0162520000 100
ZP (1.5) 0240720000 50
ZP (2.5) 0288520000 20
SST 1.2 0306600000
DEK 6 see “Accessories”
a r
6/22/36.5
8,4
9 mm/M 3.5/3.5 x 0.6
400 V/16 A/4/1.5 mm2
6 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…2.5
0.5…2.5
0.13...2.5 / A3
10
300 V/10 A/26…12 AWG
300 V/15 A/26…12 AWG
1.5 Qty. 2.5 Qty.
0303860000100 0301060000100
Type Cat. No. Qty.
AP (3) 0476260000 50
TW (0.5) 0442300000 50
PS 2.3 0180400000 20
SST 1.2 0306600000
IH 2.8 0386060000100
DEK 6 see “Accessories”
a r
6/22/36.5
8.5/7.5
11 mm/M 2.5/3.5 x 0.6
400 V/20 A/2.5/1.5 mm2
6 kV/3
0.4…0.6
1
0.5…2.5
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.13...2.5 / A2
300 V/20 A/26…14 AWG
300 V/15 A/22…14 AWG
1.5 Qty. 2.5 Qty.
0476060000100 0478660000100
Type Cat. No. Qty.
AP (3) 0476260000 50
AP (3) 0360000000 20
TW (0.5) 0442300000 50
SST 1.2 0306600000
IH 2.8 0386060000100
DEK 6 see “Accessories”
a r
6/22/36.5
8,4
–
400 V/16 A/2.5/1.5/1 mm2
6 kV/3
–
–
0.5...2.5 / -
300 V/18 A/12 AWG max.
300 V/3 A/–
1.5 Qty. 2.5 Qty.
0476160000100 0478560000100
Type Cat. No. Qty.
AP (3) 0476260000 50
TW (0.5) 0442300000 50
SST 1.2 030660
IH 2.8 0386060000100
IH 6.3 0386260000100
DEK 6 see “Accessories”
Dimensions/approvals
Width/length/height with Pins (mm)
Length solder tag/pin (mm)
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage*/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule DIN 46 228/1 mm2
Flexible H07V-K and ferrule with plastic insul. collar mm2
Max. clamping range in mm
2
/plug gauge acc. to IEC 60 947-1 Size
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A
Rated data according to UL/CSA
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version for plate thickn. mm
PA
KrG
Pin 1.0x1.0
Pin 0.8x1.6
FS 1x6.3 slotted/0.8x2.8
12-pole PA
End plate (thickness mm)
KrG
PA
EP
Spacer (thickness mm)
KrG
KrG
Partition (thickness mm)
TW
Test plug/socket
StB Plug test socket ø 2.3
PS
Fuse pin/insulation sleeve/expansion rivet
IH
Marking tags Print
DEK Standard
Mounting rails, end brackets, further marking material see “Accessories”
* Insulation sleeves are to be used for tab connections to maintain
the rated voltage.
AKA 2.5 ADK 1 ADK 1 F
ADK 3 F ADK 1 SScrew connection
Solder connection
Tab connection
Spring-clip connection
acc. to DIN 41 611 Part 4
Wrap connection
acc. to DIN/IEC 352 Part 1
Feed-through terminals
SAK-series
173
r
6/22/52
24
11 mm/M 2.5/3.5 x 0.6
250 V/10 A/2.5 mm2
4 kV/3
0.4…0.6
1
0.5…2.5
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.33...2.5 / A2
300 V/3 A/22…14 AWG
Cat. No. 1.5 Qty.
0176960000 100
Type Cat. No. Qty.
AP (3) 0476260000 50
TW (0.5) 0442300000 50
SST 1.2 0306600000
DEK 6 see “Accessories”
a r
86/15/23
8
5
63 V/20 A/2.5/1.5 mm2
1.5 kV/3
0.4…0.45
1
0.5…2.5
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.2...2.5 / A2
300 V/10 A/24…12 AWG
300 V/10 A/24…12 AWG
Cat. No. Qty.
0241460000 50
Type Cat. No. Qty.
SN 0200100000
500
BSTb 28/12 024570… 50
BSTo 28/12 024560… 50
0109160000 solder tag
ADK 1 T AKZ 2.5 K ADK 1 FT MK 2/12
Feed-through terminals
a r
6/22/50.5
19.5…21.9
9 mm/M 3/3.5 x 0.6
400 V/8 A/4 mm2
6 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…2.5
0.5…2.5
0.13...4.0 / A3
10
300/250 V/10 A/26…12 AWG
300 V/15 A/26…12 AWG
1.5 Qty. 2.5 Qty.
0372260000 100
0366360000100
Type Cat. No. Qty.
AP (3) 0476260000 50
TW (0.5) 0442300000 50
PS 2.3 0180400000 20
SST 1.2 0306600000
DEK 6 see “Accessories”
a r
5/26/45.5
22.4…23.6
7 mm/M 2.5/3.0 x 0.5
250 V/8 A/2.5 mm2
4 kV/3
0.4…0.6
1
0.5…2.5
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.13...2.5 / A2
10
300/250 V/10 A/22…12 AWG
300 V/10 A/26…10 AWG
Cat. No. Qty.
0109160000 solder tag 100
0108960000 100
Type Cat. No. Qty.
AP (3) 0697260000 50
TW (1.5) 0318560000 20
PS 2.3 0180400000 20
StB 8.5 0215700000 50
IH 2.8 0386060000 10 0
DEK 5 see “Accessories”
174
SP 90 FF2)
SP 90 LF3)
40/45.5/228.5/110
217/90
400* V/16 A/2.5/1.5 mm2
6 kV/3
Type Cat. No. Qty.
SP 90 FF** 0248120000 1
SP 90 FF** 0608920000 1
SP 90 LF** 0248220000 1
printed:
** A...F / 1...15
Type Cat. No. Qty.
IH 2.8 0386060000100
IH 6.3 0386260000100
TOP 1.5 F/32 SP 10 FF2)
SP 10 LF3)
SP 60 FF2)
SP 60 LF3)
40.2/110.6/29.5
101.6/20.3
10 mm/M 2.5/3.5 x 0.6
250* V/6 A/1.5/1 mm2
4 kV/3
0.4…0.7
1
0.5…2.5
1.5
0.5…1.5
0.5…1.5
0.5…1.5
A1
Type Cat. No. Qty.
TOP1.5 F/32 04431600001) 5
Type Cat. No. Qty.
IH 2.8 0386060000 100
42/46.5/170/28
147
1000* V/16 A/2.5/1.5 mm2
6 kV/3
Type Cat. No. Qty.
SP 10 FF 0456220000 10
Type Cat. No. Qty.
IH 2.8 0386060000 100
IH 6.3 0386260000 100
FW 5 see “Accessories”
40/45.5/162.5/110
151/90
400* V/16 A/2.5/1.5 mm2
6 kV/3
Type Cat. No. Qty.
SP 60 FF4) 0340320000 1
SP 60 FF4) 0340370000 1
SP 60 LF4) 0343720000 1
SP 60 LF4) 0343770000 1
SP 60 LF5) 0124520000 1
SP 60 LF5) 0124570000 1
printed:
4) A...F / 1...10
5) 00...50 / 1...10
Type Cat. No. Qty.
IH 2.8 0386060000100
IH 6.3 0386260000100
Dimensions
Width/length/height (mm)
Hole spacing/mounting dimensions mm
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage*/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U mm2
Stranded H07V-R mm2
Flexible H07V-K mm2
Flexible H07V-K and ferrule DIN 46 228/1 mm2
Flexible H07V-K and ferrule with plastic insul. collar mm2
Plug gauge acc. to IEC 60 947-1 Size
Ordering data Version
Pin 1.0 x 1.0 PA
Pin 0.8 x 2.8 (push-on), unprinted PA
Pin 0.8 x 2.8 (push-on), printed, 1…32 PA
Pin 0.8 x 2.8 (push-on), printed, 1…32, blue PA
6 x plug (6.3 x 0.8) KrG
6 x plug (6.3 x 0.8), blue KrG
6 x plug (6.3 x 0.8), bzw. 12 x 2.8 x 0.8 slotted KrG
6 x plug (6.3 x 0.8), bzw. 12 x 2.8 x 0.8 slotted, blue KrG
3 x plug (6.3x0.8)/1 x solder per pole KrG
3 x plug (6.3x0.8)/1 x solder per pole, blue KrG
3 x plug (6.3 x 0.8 bzw. 6 x 2.8 x 0.8)/1 x solder KrG
3 x plug (6.3 x 0.8 bzw. 6 x 2.8 x 0.8)/1 x solder, blue KrG
2 x direct connection, 1 x Pin 0.8 x 1.6 PA
Insulation sleeves
Marking tags Print
dekafix for group markers
1) Rated voltage 125 V
Mounting rails, end brackets, further marking material see “Accessories”
*Insulation sleeves are to be used for tab connections to main-
tain the rated voltage.
2) FF = Tab- Tab
3)LF=Solder - Tab
Rack-mounted interface systems
SAK-series
175
125 V/–/–
Type Cat. No. Qty.
0468860000 1
0468960000 1
Type Cat. No. Qty.
DSA 1 0576060000 50
125 V/–/–
Type Cat. No. Qty.
0467160000 1
0467260000 1
Type Cat. No. Qty.
DSA 1 0576060000 50
105 V/–/–
Type Cat. No. Qty.
0498960000 1
0499060000 1
with shield pins
Type Cat. No. Qty.
DSA 1 0576060000 50
125 V/–/–
Type Cat. No. Qty.
0444060000 1
0545960000 1
with shield pins
Type Cat. No. Qty.
DSA 1 0576060000 50
Size A Size B
Type in mm in mm
RV 8/8 K 81 40.64
RV 8/9 K 89 40.64
RV 8/8 L 93 40.64
RV 8/9 L 100 40.64
RV 8/20 K 187,62/31.5 63
RV 8/56 K 460/31.5 63
(K = short/L = long)
Cat. No. RV a b c
0468860000 8/8 L 26 20 200
0468960000 8/8 L 26 26 206
0467160000 8/8 K 26 20 84
0467260000 8/8 K 26 26 89
0119360000 8/20 K 26 20 84
0544460000 8/20 K 26 26 89
0462260000 8/56 K 26 20 84
0533060000 8/56 K 26 26 89
Mounting rails, end brackets, further marking material see “Accessories”
Technical data acc. to VDE
Pin versions (intern)
0.8 x 2.4/1 x 1
0.8 x 2.4/0.8 x 2.4
Plug adapter
1-pole
for connection of solid and flexible conductors from 0.75 to
1.5 mm2directly on to the pins of the interface system.
RV 8/20 short RV 8/56 short
125 V~/–/–
Cat. No. Qty.
0544460000 1
125 V~/–/–
Cat. No. Qty.
0462260000 1
0533060000 4
Technical data acc. to VDE
Pin versions (internal)
0.8 x 2.4/1 x 1
0.8 x 2.4/0.8 x 2.4
Additional versions on request
RV 8/8 short RV 8/9 short
RV 8/9 long
Rack-mounted interface systems
RV 8/8 long
