E3A2-X E3A2-X (R) AC/DC Fiber-Optic with Relay Output E3A2-X Slim Amplifier with Plug-in Outputs, Built-in Time Delays Universal supply voltage for AC/DC operation Plug-in replaceable outputs, relay or solid state Light-ON/Dark-ON operation, switch selectable Uses E32-series fiber-optic cables - over 150 models available Standard 3 A relay output Ordering Information AMPLIFIERS Part number Built-in timer E3A2-XCM4 Not provided E3A2-XCM4T Provided E3A2-XCM4D Timer functions -- ON-delay, OFF-delay, one-shot, or equal ON-delay and OFF-delay (0.1 to 5 seconds) Independently adjustable ON-delay and OFF-delay (0.1 to 5 seconds) ACCESSORIES (ORDERED SEPARATELY) Description Solid-state output modules AC (SCR output module; 200 mA, 250 VAC max. load DC NPN-SPDT output module; 200 mA, 30 VDC max. load DC PNP-SPDT output module; 30 VDC max. load Optional mounting chuck for armored fiber-optic cables Part number G3K-2R2P-1 G3KD-YR2P-1 G3KD-YR2P-2 E39-FU1-1 REPLACEMENT PARTS Description Relay, output module, SPDT, 3 A at 250 VAC (output supplied with each sensor) Mounting bracket (supplied with each sensor) Mounting chuck for standard fiber-optic cables (included with sensor) 2 2 Part number G6C-2117P-DC8 E39-L34 E39-FU1 E3A2-X E3A2-X Specifications Part Number E3A2-XCM4 Supply voltage 24 to 240 VAC, 50/60 Hz; 12 to 240 VDC Power consumption Relay output type and DC solid-state output type 1.5 W max. AC solid-state output type 2 VA max. E3A2-XCM4T E3A2-XCM4D Required fiber-optic cables E32-series fiber-optic cables; armored cables require optional mounting chuck (see Accessories) Light source Pulse modulated red LED Operating mode Light-ON/Dark-ON, switch selectable Sensitivity Adjustable Mutual interference protection Control Relay Type output Max. load Provided AC solidstate Type SPDT with G6C-2117P-DC8 output module (standard) 3 A, 250 VAC (p.f. = 1); 3 A, 30 VDC SCR with G3K-2R2P-1 output module (optional) Max. load 200 mA, 250 VAC Min. load 5 mA Max. inrush 2A OFF-state leakage current 1 mA max. DC solidstate Response time (ON and OFF) Timing functions Circuit protection Type Max. load 200 mA, 30 VDC Max. on-stage voltage drop 2 VDC at 200 mA Relay 15 ms max. with G6C-2117P-DC8 output module (standard) AC solid-state output 30 ms max. with G3K-2R2P-1 output module (optional) DC solid-state output 1 ms max. with G3KD-YR2P-1 or -2 output modules (optional) Type -- ON-delay, OFF-delay one-shot, equal ON- and OFF-delays, or no timer; switch selectable Independent ON-delay and OFF-delay Range -- 0.1 to 5 seconds 0.1 to 5 seconds Output short-circuit Provided with AC solid-state and DC solid-state output modules only DC power supply reverse polarity Provided Indicators Materials Light incident (red LED), Output Stability (green LED) Lens Plastic Case Plastic Mounting Connections Approvals Ambient temperature Light incident (red LED), Output Stability (green LED) Output Operation (yellow LED) Side surface mount with two through holes; Bracket E39-L34 and hardware included Conduit 1/2-14 NPT Wire Terminal screws UL 1 Weight Enclosure ratings NPN-SPDT with G3KD-YR2P-1 output module (optional) PNP-SPDT with G3KD-YR2P-2 output module (optional) 200 g (7.1 oz.) NEMA 1, 4, 4X, 12 IEC 144 IP66 UL Listed, File Number E41515 CSA -- Operating -25 to 55C (-13 to 131F) Storage -30 to 70C (-22 to 158F) 3 3 E3A2-X E3A2-X OUTPUT CIRCUIT DIAGRAMS Relay output AC solid-state output DC solid-state PNP output DC solid-state NPN output CONNECTIONS TIMING CHARTS LIGHT Note: 1. For E3A2-XCM4 amplifier without built-in timer functions, operation follows the NORM mode shown with multi-function time delay model. Incident Interrupted NORM ON OFF ON-D. ON OFF OFF-D. ON OFF O.S.D. ON OFF T T T LIGHTON Multifunction (-T) T T T T T T T ON/OFF-D. ON OFF NORM ON OFF ON-D. ON OFF OFF-D. ON OFF O.S.D. ON OFF T T T Output mode (No output) DARK ON T T T T T T ON/OFF-D. ON OFF T1 LIGHT-ON ON OFF DARK-ON ON OFF ON+OFFdelay (-D) T2 T1 T2 T1 T2 4 4 T2 T1 2. T1, T2 and T denote set time, variable within 0.1 to 5 second range. 3. For multi-function time delay model (E3A2-XCM4T), the ONand OFF-delay time settings will be the same for T1 and T2. 4. For ON- and OFF-delay model (E3A2-XCM4D), T1 and T2 are independently variable. E3A2-X E3A2-X Dimensions Unit: mm (inch) AMPLIFIERS Mounting holes 6.6 36 6 R3.2 36 (1.42) 6 (0.24) 23 6.4 25 26 (1.02) (0.98) 26 (1.02) max. 75.3 (2.96) 7.8 (0.31) 48 2 (0.08) 9 (0.35) max. 57 (2.24) 11 33 12 dia. 38 8 (0.31) 10 (0.39) 39 (1.54) 72.5 (2.85) 89 75 (2.95) (3.50) 6 13 (0.51) 20 Two 5.5 mm dia. mounting holes 6 36 FIBER-OPTIC CABLES Refer to E32 data sheet for dimensions of plastic fiber-optic cables and accessories. OMRON ELECTRONICS LLC OMRON ON-LINE OMRON CANADA, INC. One East Commerce Drive Schaumburg, IL 60173 Global - http://www.omron.com USA - http://www.omron.com/oei Canada - http://www.omron.com/oci 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OMRON Cat. No. CEDSAX4 11/01 Specifications subject to change without notice. 416-286-6465 Printed in the U.S.A. 5