M5200 Industrial Pressure Transducer CE Compliant Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber Weatherproof Gage, Sealed, Compound Gage DESCRIPTION The M5200 pressure transducers from the MicrofusedTM line of MEAS, with their modular design, offer maximum flexibility for different configurations. This latest series sets a new price performance standard for demanding commercial and heavy industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. The pressure port material is machined from a solid piece of 17-4 PH stainless steel. Its durability is excellent and there are no o-rings, welds or organics exposed to the pressure media. The M5200 is weatherproof and exceeds the latest heavy industrial CE requirements including surge protection. The circuit is protected from reverse wiring at input and short circuit at output. This product is geared to the OEM customer for low to high volumes. MEAS stands ready to provide a custom design of the M5200 where the volume and application warrants. Additional configurations not listed are either available or possible. Please inquire for further information. FEATURES APPLICATIONS Heavy Industrial CE Approval Industrial Process Control and Monitoring 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output Advanced HVAC Systems Refrigeration Systems Automotive Test Stands 0.25% Accuracy 1.0% Total Error Band Compact Outline -40C to +125C Operating Temperature Weatherproof Off-Road Vehicles Pumps and Compressors Hydraulic/Pneumatic Systems Agriculture Equipment Energy Generation and Management STANDARD RANGES Range (psi) Gage Compound Range (Bar) Gage 0 to 50 Sealed 0 to 3.5 Sealed Compound 0 to 100 0 to 007 0 to 200 0 to 014 0 to 300 0 to 020 0 to 500 0 to 035 0 to 01k 0 to 070 0 to 03k 0 to 200 0 to 05k 0 to 350 0 to 07k 0 to 500 0 to 10k 0 to 700 0 to 15k 0 to 01k Intermediate ranges available upon request. M5200 www.meas-spec.com 1/6 April 2014 M5200 Industrial Pressure Transducer PERFORMANCE SPECIFICATIONS Ambient Temperature: 25C (unless otherwise specified) PARAMETERS MIN Accuracy (combined non linearity, hysteresis, and repeatability) TYP -0.25 Isolation, Body to any Lead MAX UNITS NOTES 0.25 %F.S. BFSL M @500VDC mA @500VAC, 1min 100 Dielectric Strength 2 Pressure Cycles 1.00E+6 0~FS Cycles Proof Pressure 2X Burst Pressure 5X 20k psi Rated Long Term Stability (1 year) -0.25 0.25 %F.S. Total Error Band -1.0 1.0 %F.S. Compensated Temperature -20 +85 C Operating Temperature -40 +125 C Storage Temperature -40 +125 C Rated Except cable 105C max Load Resistance (RL) RL > 100k Load Resistance (RL) < (Supply Voltage -9V) / 0.02A Current Consumption Over compensated temperature range 5 Voltage Output Current Output mA Voltage Output Rise Time (10% to 90%) <2ms (Voltage Output); <3ms (Current Output); Without Snubber Wetted Material 17-4PH Port, 316 Stainless Steel Snubber Gage Pressure Reference Vent Under 1k psi, customer to ensure venting through mating connector Bandwidth DC to 1KHz (Typical) Shock 50g, 11msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A Vibration 20g, MIL-STD-810C, Procedure 514.2, Fig 514.2-2, Curve L For custom configurations, consult factory. Notes All configurations are built with supply voltage reverse and output short-circuit protections. CE Compliance EN 55022 Emissions Class A & B IEC 61000-4-2 Electrostatic Discharge Immunity (8kV contact/15kV air) IEC 61000-4-3 Radiated, Radio-Frequency Electromagnetic Field Immunity (10V/m, 80M-1GHz) IEC 61000-4-4 Electrical Fast Transient Immunity (1kV) IEC 61000-4-5 Surge Immunity (V+ to V-: 2KV/42; L to Case: 1KV/12; V- to V0: 1KV/42) IEC 61000-4-6 Immunity to Conducted Disturbances Induced by Radio Frequency Fields (150K~80MHz, 10V level for voltage output models, 3V level for current output model) IEC 61000-4-9 Pulse Magnetic Field Immunity (100A/m peak) For all CE compliance tests, max allowed output deviation 1.5 %F.S. M5200 www.meas-spec.com 2/6 April 2014 M5200 Industrial Pressure Transducer DIMENSIONS [mm] CODE CONNECTION TYPE DIM A 1 CABLE 2 FT 2.19 [55.6] E CABLE 3 FT 2.19 [55.6] 2 CABLE 4 FT 2.19 [55.6] 3 CABLE 10 FT 2.19 [55.6] 4 PACKARD CONNECTOR A 2.25 [57.2] 5 BAYONET CONNECTOR 2.11 [53.6] 6 FORM C 1.95 [49.5] 7 FORM A 2.10 [53.3] 9 PACKARD CONNECTOR B 2.25 [57.2] D M12 CONNECTOR 1.95 [49.5] M CABLE 1 M 2.19 [55.6] N CABLE 2 M 2.19 [55.6] P CABLE 5 M 2.19 [55.6] R CABLE 10 M 2.19 [55.6] A AMP CONNECTOR 2.10 [53.3] S SUMITOMO CONNECTOR 1.95 [49.5] C 1/2" NPT CONDUIT 2.10 [53.3] 1 CODE 4 3 2 2 3 4 5 6 B E F 1 2 3 123 1 2 3 1 P 7/16-20UNF FEMALE SAE J514 STRAIGHT THREAD WITH INTEGRAL VALVE DEPRESSOR Q M10 x 1.0 mm ISO 6149-2 S M12 x 1.5 mm ISO 6149-2 U G/14 DIN 3852 FORM E GASKET DIN3869-14 NBR W M20 x 1.5 mm ISO 6149-2 G M14 x 1.5 mm ISO 6149-2 2 3 Note: For Sumitomo and 1/2" NPT Conduit, contact factory for additional information. M5200 PRESSURE PORT TYPE PORT DIM B 0.47 1/4-19 BSPP [11.94] 0.54 G3/8 JIS B2351 [13.72] 0.45 7/16-20UNF MALE SAE J514 STRAIGHT THREAD [11.43] 0.60 1/4-18 NPT [15.24] 0.39 1/8-27 NPT [9.91] 0.47 G1/4 JIS B2351 [11.94] 0.50 1/4-19 BSPT [12.7] 0.70 1/4-19 BSPP FEMALE [17.78] www.meas-spec.com 3/6 DIM C REF. 0.366 [9.3] 0.366 [9.3] 0.366 [9.3] 0.366 [9.3] 0.366 [9.3] 0.366 [9.3] 0.366 [9.3] 0.366 [9.3] 0.43 [10.92] 0.506 [12.85] 0.42 [10.67] 0.53 [13.46] 0.47 [11.94] 0.70 [17.78] 0.40 [10.16] 0.366 [9.3] 0.366 [9.3] 0.445 [11.3] 0.366 [9.3] 0.366 [9.3] April 2014 M5200 Industrial Pressure Transducer WIRING CONNECTION Bayonet Packard, A A B C Packard, B B A C Cable 1/2NPT CONDUIT RED RED BLK BLK M12 1 3 2,4 AMP/TE 1 2 3 FORM C 1 2 3,4 FORM A 1 2 3,4 Sum itom o 1 2 3 CONNECTION Bayonet Notes: 1. 2. M5200 Current Output Wiring NC. PINS +SUPPLY -SUPPLY C,D,E A B Voltage Output Wiring +SUPPLY +OUTPUT COMMON A B C P REF VENT F Hole Through Connector Hole Through Connector In Cable In Cable Hole Through Connector Hole Through Connector Threads Through Connector Threads Through Connector Hole Through Connector NC. PINS D,E Packard, A A C B Packard, B B C A Cable 1/2NPT CONDUIT RED RED WHT WHT BLK BLK M12 1 2 3 AMP/TE 1 3 2 FORM C 1 2 3 4 FORM A 1 3 2 4 Sum itom o 1 3 2 4 P REF VENT F Hole Through Connector Hole Through Connector In Cable In Cable Hole Through Connector Hole Through Connector Threads Through Connector Threads Through Connector Hole Through Connector NC pins are reserved for factory use only. Customers should not use these connections. For cable connection, the drain wire is internally terminated to pressure port. www.meas-spec.com 4/6 April 2014 M5200 Industrial Pressure Transducer CONNECTION TYPES CONNECTION TYPES MATING HOUSING P/N PT06A-10-6S MIL-C-26482 12078090 MATING TERMINAL P/N 12103881, QTY 3 RUBBER SEAL P/N - 4-WIRE,22 AWG, SHIELDED, PVC JACKET, 105 DEGC - - - BINDER SERIES 713, 09 0439 387 04 OR EQUIV 4-POS FEMALE CONNECTOR - 172746-1 (AWG 20~24) 172888-2 (AWG 16~20) QTY 3 CONNECTION DESCRIPTION Bayonet Packard Cable & 1/2NPT Conduit BAYONET PTIH-10-6P OR EQUIV 3-PIN METRI-PACK 150 M12 AMP/TE AMP / TE 3-PIN ECONOSEAL J SERIES 174357-2 & 174358-7 171630-1 (AWG 20~24) 171662-1 (AWG 16~20) QTY 3 FORM C INDUSTRIAL STANDARD 9.4MM FORM C HIRSCHMANN 933 024-100,OR, ATAM KD046000B7 (SEAL INCL.) - HIRSCHMANN 730 185-002 FORM A DIN EN 175 301-803-A 18MM HIRSCHMANN 931 969-100,OR, ATAM KA245000B4 (SEAL INCL.) - HIRSCHMANN 730 801-002 Sum itom o SUMITOMO 3-PIN HV040 6189-6907 8100-3067 (AWG 20~22) 8100-3068 (AWG 16~18) QTY 3 7165-1075 (INS. DIA 1.1~1.6MM) 7176-0621 (INS. DIA 1.6~1.9MM) 7165-0622 (INS. DIA 1.8~2.2MM) QTY 3 Note: Transmitter of gage pressure type requires vent to atmosphere on the pressure reference side. This is accomplished via cable from the transmitter (the end of the cable should be terminated to clean and dry area) or through the customer mating connec tor/cable assembly which has internal vent path. WEATHERPROOF WEATHER-PROOF RATING CONNECTION IP CODE Bayonet IP67 Packard IP66 Cable IP67 1/2NPT CONDUIT IP67 M12 IP67 AMP/TE NOT RATED FORM C IP65 FORM A IP65 Sum itom o IP67 Note: Weatherproof ratings are met when the mating connectors are installed properly and the cable termination is to dry and clean area. OUTPUTS CODE 3 4 5 6 7 8 9 M5200 OUTPUT SIGNAL 0.5 - 4.5V RATIOMETRIC 1 - 5V 4 - 20mA 0 - 5V 0 - 10V 1 - 6V 0.5 - 4.5V SUPPLY VOLTAGE 5 0.25V PROTECTED to 30V 8 - 30V 9 - 30V 8 - 30V 12 - 30V 8 - 30V 5 - 30V www.meas-spec.com 5/6 April 2014 M5200 Industrial Pressure Transducer ORDERING INFORMATION M52 3 Model Output Signal M52 3 = 0.5 - 4.5V Ratiometric 4 = 1 - 5V 5 = 4 - 20mA 6 = 0 - 5V 7 = 0 - 10V 8 = 1 - 6V 9 = 0.5 - 4.5V 1 - 0 Connection Type - Port Material 1 = Cable 2 ft E = Cable 3 ft 2 = Cable 4 ft 3 = Cable 10 ft 4 = Packard Connector A 5 = Bayonet Connector 6 = Form C 7 = Form A 9 = Packard Connector B D = M12 Connector M = Cable 1 m N = Cable 2 m P = Cable 5 m R = Cable 10 m A = Amp Connector S = Sumitomo Connector C = 1/2" NPT Conduit - 0 = 17-4PH 0 00 0 5 Pressure Port Snubber 00 Label 0 = No Snubber 1 = Oxygen Clean B40.1 Level IV 2 = With Snubber 00 0 = Adhesive Label 1 = Laser Marking 2 = 1/4-19 BSPP 3 = G3/8 JIS B2351 4 = 7/16-20UNF Male SAE J514 Straight Thread 5 = 1/4-18 NPT 6 = 1/8-27NPT B = G1/4 JIS B2351 E = 1/4-19 BSPT F = 1/4-19 BSPP Female P = 7/16-20UNF Female SAE J514 with Integral Valve Depressor Q = M10 x 1.0 mm ISO 6149-2 S = M12 x 1.5 mm ISO 6149-2 U = G1/4 DIN 3852 Form E Gasket DIN386914 NBR W = M20 x 1.5 mm ISO 6149-2 G = M14 x 1.5 mm ISO 6149-2 - 100P G - Pressure Range Pressure Type - 050P 100P 200P 300P 500P 01KP 03KP 05KP 07KP 10KP 15KP 3.5B 007B 010B 020B 035B 070B 200B 350B 500B 700B 01KB G = Gage S = Sealed (1k psi) C = Compound Gage Note: For Sumitomo and 1/2" NPT Conduit, contact factory for additional information. NORTH AMERICA EUROPE Measurement Specialties 45738 Northport Loop West Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com Measurement Specialties (Europe), Ltd. 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assum ed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specif ically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. M5200 www.meas-spec.com 6/6 April 2014 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: M5231-000005-500PG M5231-000005-100PG M5251-000005-01KPG M5251-000005-250PG M5241-000005250PG