LoPAC™ Family Rev 2.5
Page 1 of 9 02/2018
Power Factor Corrected, AC-DC Switchers
LoPAC™ Family
PFC Mini™, PFC Micro™, PFC MicroS™
Features & Benefits
• Near unity power factor
• EN61000-3-2 harmonic current compliance
• Low profile package
• Output power to 1,500W
• Up to six user-specifiable outputs
• Universal AC input
• Power density up to 11W/in3
• Integral cooling fans
• Autosense
• Safety agency approvals:
CE Marked, cTÜVus
• Vantage Line
[a]
• RoHS compliant
Product Description
The PFC MicroS, PFC Micro and PFC Mini are
members of the low profile, high-density LoPAC
series of power factor corrected AC-DC power
supplies. Available as a one-, two- or three-slot
package, respectively, each LoPAC slot can be
configured with standard Vicor DC-DC converter
modules enabling up to six user-specifiable
isolated outputs in a package only 1.72in
[43,6mm] high with a power density of 11W/in3.
For maximum versatility and flexibility, the LoPAC
can be configured with VI-26x (full-brick), VI-J6x
(half-brick) or Maxi, Mini, Micro V375 Series
full-, half- and quarter-brick modules. These
modules cover the entire range of outputs from
1 to 100VDC and 25 to 600W. The optimum
solution can be factory configured based on your
exact voltage and power requirements.
For conducted EMI, certain configurations meet
EN55022 and FCC Part 15 Class A (consult
factory). Harmonic current limits per EN61000-3-2
and Surge Immunity per EN61000-4-5 in addition
to a wide variety of safety agency approvals
further enhance the LoPAC flexibility.
Product Prefix
PM = PFC Mini
PC = PFC Micro
PS = PFC MicroS
Number of
VI-200 ™/VI-J00™
Modules
Number of
Maxi, Mini or Micro
Modules
Optional
Factory
Assigned
Factory
Assigned
Number of
Output
Voltages
[a] The Vantage Line is the Vicor affordable power supply option. Minor variances in some
specifications between the Vantage Line and the Standard Line apply. Contact factory
for more information.
[b] Refer to Design Guide for more on the optional codes.
Optional Factory
Assigned
2 = FasTrak
G = RoHS
Optional Codes
[b]
LL = Low Leakage
QF = Quiet Fan
(only available on PFC Mini)
Part Numbering
PFC Mini
12.20 x 6.00 x 1.72in
[309,9 x 152,4 x 43,6mm]
Up to 1500W
1 – 6 Outputs
PFC Micro
10.40 x 5.06 x 1.86in
[264,1 x 128,5 x 47,3mm]
Up to 800W
1 – 6 Outputs
PFC MicroS
7.95 x 5.06 x 1.86in
[201,9 x 128,5 x 47,3mm]
Up to 600W
1 – 3 Outputs
-X6XXXX -X5
X4
X3
X2
X1
PM -
LoPAC™ Family Rev 2.5
Page 2 of 9 02/2018
LoPAC™ PFC Mini™, PFC Micro™, PFC MicroS™
DC Output Selections
The versatility of the LoPAC series is due in large part to the wide
array of Vicor modules available to be configured into the different
package formats. Slots can be populated with VI-200™, VI-J00™ or
Maxi, Mini, Micro modules in full-, half- or quarter-brick sizes. The
Vicor full VI-26x, VI-J6x and V375 standard product matrices are
available to choose from.
In addition, the full range of non-standard voltages and powers
from 1 to 100VDC and 10 to 600W is also available for inclusion. The
table below is just a sampling of some of the most popular standard
outputs that can be configured into LoPAC slots.
LoPAC Slot Configurations
The DC-DC converter modules are used to populate each LoPAC
converter slot. Each slot can be configured in different ways
depending on module sizes and power limitations.
The following table summarizes the available slot configurations for
each of the three LoPAC packages.
Autosense Feature
[c]
This feature is implemented in all converter slots in the LoPAC
family. If remote-sense connections are not needed or are
inadvertently not made, no local-sense connections are necessary.
Simply connect the output(s) to the load and the converter(s) will
automatically operate in the local-sense mode. If remote-sense
connections are made, the unit will operate in remote-sense mode.
[c] Applies to converter slots utilizing Maxi or Mini size converters.
Output Voltage
(VDC)
Available Power (W) per Package Size
Full Brick Half Brick Quarter Brick
Maxi VI-200 Mini VI-J00 Micro
2 160 80 60 100 40 30 50
3.3 264 132 99 150 66 50 75
5 400 200 150 200 100 75 100
12 600 200 150 300 100 75 150
15 600 200 150 300 100 75 150
24 600 200 150 300 100 75 150
28 600 200 150 300 100 75 150
48 600 200 150 300 100 75 150
Model Type Number of Slots
Maximum Output Power
Modules per SlotTotal
at 230VAC at 115VAC
PFC Mini™ 3 1,500W 800W 1 full or 2 half
PFC Micro™ 2 800W 500W 1 full or 2 half or 3 quarter
PFC MicroS™ 1 600W 500W 1 full or 2 half or 3 quarter
LoPAC™ Family Rev 2.5
Page 3 of 9 02/2018
LoPAC™ PFC Mini™, PFC Micro™, PFC MicroS™
Performance Specifications
The following are typical performance specifications at room ambient temperature, nominal line voltage (115 / 230VAC) and 75% load on all outputs, unless
specified otherwise. For detail specifications, consult the Design Guide for the LoPAC configuration of interest. This is available at vicorpower.com.
Input Characteristics
Parameter PFC Mini PFC Micro PFC MicroS Units Notes
AC Input
Voltage 85 – 264 VAC
Frequency (Standard) 47 – 500 Hz
Frequency (Vantage) 47 – 63 Hz
DC Input 100 – 380 100 – 300 VDC
Line Regulation 0.4 % From low line to high line
Inrush Current
@ 115VAC 8.5 7 APK
@ 230VAC 17 14 APK
Ride-Through Time >20 ms
@ Load 1,200 500 W
Conducted EMI / RFI FCC Class A FCC Class A (consult factory)
EN55022 Class A EN55022 Class A (consult factory)
Power Factor >0.98 >75% load
Harmonic Current Limits EN61000-3-2/A14 Class A
Transient Burst Immunity EN61000-4-4 EN61000-4-4 Level 3, Performance Criteria B
Surge Immunity
EN61000-4-5 Installation Class 3
Performance Criteria B
Dielectric Withstand
Primary to Chassis GND 2,121 VDC
Primary to Secondary 4,242 VDC
Secondary to Chassis GND 750 VDC
LoPAC™ Family Rev 2.5
Page 4 of 9 02/2018
LoPAC™ PFC Mini™, PFC Micro™, PFC MicroS™
Parameter PFC Mini PFC Micro PFC MicroS Units Notes
Setpoint Accuracy (Standard) 1% (standard), 2% (special) Of VNOM
Setpoint Accuracy (Vantage) 2% (standard), 5% (special)
Load Regulation 0.05 % 10% to full load
0.2 % No load to full load
Temperature Regulation 0.005 %/°C –20 to +65°C
Long-Term Drift 0.02 %/khr
Output Ripple & Noise
≤ 10VOUT 100 mV 20MHz band width
> 10VOUT 1.0 %VOUT 20MHz band width
Voltage Trim Range
VI-200™ / VI-J00™ modules 50 – 110 %VOUT ±10% on 10 – 15VOUT
Maxi, Mini, Micro modules 10 – 110 %VOUT Preload may be required
Remote Sense Compensation 0.5 VDC Autosense (See page 2)
OVP Set Point 125 %VOUT Not available on VI-J00 Modules
Current Limit 115 %IMAX Auto recovery
Parameter PFC Mini PFC Micro PFC MicroS Units Notes
Storage Temperature –40 to +85 °C
Operating Temperature
Full Rated Power (Standard) –20 to +45 °C
50% Rated Power (Standard) –20 to +65 °C
Full Rated Power (Vantage) 0 to +45 °C
50% Rated Power (Vantage) 0 to +65 °C
Vibration MIL-STD-810E, Category 10
Minimum Integrity Test
Safety Approvals CE Marked, cTÜVus
Parameter PFC Mini PFC Micro PFC MicroS Units Notes
Weight 5.5 [2,5] 5.2 [2,4] 3.1 [1,4] lbs [kg]
Overall Dimensions 12.20 x 6.00 x 1.72 10.40 x 5.06 x 1.86 7.95 x 5.06 x 1.86 in L x W x H
[309,9 x 152,4 x 43,6] [264,1 x 128,5 x 47,3] [201,9 x 128,5 x 47,3] [mm]
Performance Specifications (Cont.)
The following are typical performance specifications at room ambient temperature, nominal line voltage (115 / 230VAC) and 75% load on all outputs, unless
specified otherwise. For detail specifications, consult the Design Guide for the LoPAC configuration of interest. This is available at vicorpower.com.
Output Characteristics
Environmental Characteristics
Mechanical Characteristics
LoPAC™ Family Rev 2.5
Page 5 of 9 02/2018
LoPAC™ PFC Mini™, PFC Micro™, PFC MicroS™
Mechanical Drawing, PFC Mini
12.03 305.56
12.16 308.86
6.00 152.40
12.49 ±0.02 317.29 ±0.51
0.34 ±0.02 8.64 ±0.51
2
5.268 133.81
1.72 ±0.02 43.69 ±0.51
2.210 56.13
1.600 40.64
0.487 12.36
0.920 23.37
J3-1 E/D-1
J3-2 E/D-2
J3-3 E/D-3
J3-4 SIGNAL GROUND
J3-5 VCC +5V 300m
A
J3-6 ACOK AC POWER OK
J3-7 GSD GENERAL SHUTDOWN
J3-8 SPARE
J3-9 SPARE
MATING HDWR: (AMP P/N: OR EQUIVALENT)
HOUSING: AMP P/N: 205204-4
TERMINALS: AMP P/N: 66506-9
SCREW LOCK: AMP P/N: 205980-4
CRIMP TOOL: AMP 58448-3
3
J3 INTERFACE PIN OUT
J3 INTERFACE CONNECTION
MBJ1 INPUT CONNECTIONS
MBJ1-1 EARTH GROUND
MBJ1-2 L2 / NEUTRAL
MBJ1-3 L1
CLAMPING SCREWS
14 AWG WIRE
2
NOTES: UNLESS OTHERWISE SPECIFIED
1. INTERPRET DRAWING PER ANSI Y14.5-1994.
WITH OPTIONAL BUSBAR.
A COMPLETE SET OF MATING CONNECTORS CAN
BE PURCHASED FROMWESTCOR BY SPECIFYING
CONNECTOR KIT P/N: 19-130047
REF DESIGNATION LEGEND
MB = MOTHER BOARD
S1 = (SLOT 1) DAUGHTERBOARD MODULES E/D 1.
S2 = (SLOT 2) DAUGHTERBOARD MODULES E/D 2.
S3 = (SLOT 3) DAUGHTERBOARD MODULES E/D 3.
4
3
2.00 50.80
0.47 11.94
8.00 203.20
CUSTOMER MOUNTING HOLES:
2X #8-32 X 0.156 or M4 X 4mm MAX LG.
FROM OUTSIDE OF POWER SUPPLY
8.00 203.20 2.00 50.80
1.00 25.40
4.00 101.60
CUSTOMER MOUNTING HOLES:
4X #8-32 X .156 or M4 X 4mm MAX LG.
FROM OUTSIDE OF POWER SUPPLY
BOTTOM VIEW
SCALE: 1:2
5 1
9 6
FOUR OUTPUT UNIT PICTURED
(SEE PAGE 7 FOR DETAILED OUTPUT
CONNECTION INFORMATION .)
PFC MINI
LoPAC™ Family Rev 2.5
Page 6 of 9 02/2018
LoPAC™ PFC Mini™, PFC Micro™, PFC MicroS™
Mechanical Drawing, PFC Micro
SIX OUTPUT UNIT PICTURED
(SEE PAGE 7 FOR DETAILED OUTPUT
CONNECTION INFORMATION . )
NOTES: UNLESS OTHERWISE SPECIFIED
2
32,691.29 190,507.500
31,041.22
MOUNTING HOLES; 2 PLACES
USE 8-32 X 0.25 or M4 X 6MM MAX LENGTH
FROM OUTSIDE OF UNIT
32,691.29 190,507.500
264,1110.40 18,030.71
88,903.500
6,35±0,510.25±0.024,090.16 260,0210.24
270,46±0,5110.65±0.02
MOUNTING HOLES; 4 PLACES
USE 8-32 X 0.12 or M4 X 3MM MAX LENGTH
FROM OUTSIDE OF UNIT
3
3
4
31,041.22190,507.50032,691.29
MOUNTING HOLES; 2 PLACES
USE 8-32 X 0.25 or M4 X 6MM MAX LENGTH
FROM OUTSIDE OF UNIT
4
3
2
PIN-1
4
1
L1
L2/N
GND
N/C
N/C
4
DIMENSIONS SHOWN ARE FROM BOTTOM SURFACE.
MOUNTING PEMNUTS EXTEND .010 PAST BOTTOM SURFACE
128,525.06
47,291.86
S1
S2
MBJ1 (5 PIN) MBJ1 A/C INPUT
MATING CONNECTOR:
HOUSING: MOLEX (39-01-4051)
TERMINAL: MOLEX (39-00-0090)
CRIMP TOOL: MOLEX (11-01-0199)
CBJ3 INTERFACE CONNECTOR
MATING CONNECTOR:
HOUSING: MOLEX (50-57-9412)
SOCKET CRIMP 24-30 AWG: MOLEX (16-02-0097)
CRIMP TOOL: MOLEX (11-01-0209)
CBJ3 (12 PIN)
PIN REF DESCRIPTION
CBJ3-1 SGND SIGNAL GROUND
CBJ3-2 PGR POWER GOOD/READ
CBJ3-3 ACOK AC POWER OK
CBJ3-4 ED6 ENABLE/DISABLE S2M3
CBJ3-5 ED5 ENABLE/DISABLE S2M2
CBJ3-6 ED4 ENABLE/DISABLE S2M1
CBJ3-7 ED3 ENABLE/DISABLE S1M3
CBJ3-8 ED2 ENABLE/DISABLE S1M2
CBJ3-9 ED1 ENABLE/DISABLE S1M1
CBJ3-10 GSD GENERAL SHUTDOWN
CBJ3-11 PGDV POWER GOOD/DATA VALID
CBJ3-12 Vcc +5V@40mA
PFC MICRO
AIR
FLOW
WITH OPTIONAL BUS BAR
1
1
A COMPLETE SET OF MA
TING CONNECTORS I S AVAILABLE BY
SPECIFYING WESTCOR CONNECTOR KIT P/N: 19-130044
1
2
REFERENCE DESIGNATIONS
MB MOTHER BOARD
CB CONTROL BOARD
S(x) SLOT NUMBER
M(x) MODULE NUMBER
LoPAC™ Family Rev 2.5
Page 7 of 9 02/2018
LoPAC™ PFC Mini™, PFC Micro™, PFC MicroS™
Mechanical Drawing, PFC MicroS
TRIPLE OUTPUT UNIT PICTURED
(SEE PAGE 7 FOR DETAILED OUTPUT
CONNECTION INFORMATION).
NOTES: UNLESS OTHERWISE SPECIFIED
3
1
31,041.22
32,821.29 129,545.100
3
MOUNTING HOLES; 2 PLACES
USE 8-32 X 0.25 or M4 X 6MM MAX LENGTH
FROM OUTSIDE OF UNIT
32,691.29 129,545.100
18,030.71
88,903.500
201,887.95
4,090.16
MOUNTING HOLES 4 PLACES
USE 8-32 X 0.12 or M4 X 3MM LENGTH
FROM OUTSIDE OF UNIT
31,041.22
129,545.10032,691.29
MOUNTING HOLES; 2 PLACES
USE 8-32 X 0.25 or M4 X 6MM MAX LENGTH
FROM OUTSIDE OF UNIT
3
L1
L2/N
GND
N/C
N/C
MATING CONNECTOR:
HOUSING: MOLEX (50-57-9412)
TERMINAL: MOLEX (16-02-0097)
CRIMP TOOL: MOLEX (11-01-0209)
MATING CONNECTOR:
HOUSING: MOLEX (39-01-4051)
TERMINAL: MOLEX (39-00-0090)
CRIMP TOOL: MOLEX (11-01-0199)
PIN 1
2
128,525.06
47,291.86
3
MBJ1 (5 PIN)
MBJ1 A/C INPUT
CBJ3 (12 PIN)
CBJ3 E/D INTERFACE CONNECTOR
S1
PIN REF DESCRIPTION
CBJ3-1 SGND SIGNAL GROUND
CBJ3-2 PGR POWER GOOD/READ
CBJ3-3 ACOK AC POWER OK
CBJ3-4 N/C N/C
CBJ3-5 N/C N/C
CBJ3-6 N/C N/C
CBJ3-7 ED3 ENABLE/DISABLE S1M3
CBJ3-8 ED2 ENABLE/DISABLE S1M2
CBJ3-9 ED1 ENABLE/DISABLE S1M1
CBJ3-10 GSD GENERAL SHUTDOWN
CBJ3-11 PGDV POWER GOOD/DATA VALID
CBJ3-12 Vcc +5V@40mA
PFC MICROS
AIR
FLOW
2
1
DIMENSIONS SHOWN ARE FROM BOTTOM SURFACE.
MOUNTING PEMNUTS EXTEND .010 PAST BOTTOM SURFACE.
A COMPLETE SET OF MATING CONNECTORS IS AVAILABLE
BY SPECIFYING WESTCOR CONNECTOR KIT P/N: 19-130044
1
2
REFERENCE DESIGNATIONS
MB MOTHER BOARD
CB CONTROL BOARD
S(x) SLOT NUMBER
M(x) MODULE NUMBER
LoPAC™ Family Rev 2.5
Page 8 of 9 02/2018
LoPAC™ PFC Mini™, PFC Micro™, PFC MicroS™
2
3
4
5
6
7
8
11
12
13
14
15
16
17
110
918
1 + VOUT M2
2 – VOUT M2
3 – VOUT M2
4 + SENSE M2
5 – SENSE M2
6 TRIM M1
7 + VOUT M1
8 + VOUT M1
9 – VOUT M1
10 + VOUT M2
11 + VOUT M2
12 – VOUT M2
13 + SENSE M1
14 TRIM M2
15 – SENSE M1
16 + VOUT M1
17 – VOUT M1
18 – VOUT M1
PIN DESCRIPTION PIN DESCRIPTION
10-32 OUTPUT STUDS
– REMOTE SENSE
3
SxJ2 REMOTE SENSE/TRIM
PIN CONNECTOR
1
2
TRIM
+ REMOTE SENSE
MATING CONNECTOR:
HOUSING: MOLEX (50-57-9403)
TERMINAL FEMALE CRIMP 22-24 AWG: MOLEX (16-02-0103)
USE CRIMP TOOL: MOLEX (11-01-0208)
B. MOLEX CONNECTOR - SINGLE OR DUAL OUTPUT
(when populated with Half Brick modules)
PFC MICRO 18 Pin Housing
A. OUTPUT STUDS - SINGLE OUTPUT
(when populated with Full Brick modules)
PFC Mini, PFC Micro and PFC MicroS
SxJ1 (18 PIN OUTPUT, REMOTE SENSE
AND TRIM PIN CONNECTOR)
*PFC MicroS dual output slot configuration uses the
type A stud connection for both outputs.
3-pin connector designators are S1J1 and S1J2.
–VOUT
+VOUT
2
3
4
5
6
7
8
10
11
12
13
14
15
16
19
MATING CONNECTOR:
16 PIN HOUSING: MOLEX (39-01-2160)
TERMINAL FEMALE CRIMP 18-24 AWG: MOLEX (39-00-0039)
USE CRIMP TOOL: MOLEX (11-01-0197)
9 +VOUT M3
10 –VOUT M3
11 N/C
12 +VOUT M2
13 –VOUT M2
14 TRIM M1
15 +VOUT M1
16 –VOUT M1
1 +VOUT M3
2 –VOUT M3
3 TRIM M3
4 +VOUT M2
5 –VOUT M2
6 TRIM M2
7 +VOUT M1
8 –VOUT M1
SxJ1 (16 PIN OUTPUT, REMOTE SENSE
AND TRIM PIN CONNECTOR)
PIN DESCRIPTION PIN DESCRIPTION
C. MOLEX CONNECTOR - SINGLE, DUAL OR TRIPLE OUTPUT
(when populated with Quarter Brick modules)
PFC Micro and PFC MicroS
2
3
4
5
6
7
8
11
12
13
14
15
16
17
110
918
1 + VOUT M1
2 – VOUT M1
3 – VOUT M1
4 + SENSE M1
5 – SENSE M1
6 TRIM M2
7 + VOUT M2
8 + VOUT M2
9 – VOUT M2
10 + VOUT M1
11 + VOUT M1
12 – VOUT M1
13 + SENSE M2
14 TRIM M1
15 – SENSE M2
16 + VOUT M2
17 – VOUT M2
18 – VOUT M2
PIN DESCRIPTION PIN DESCRIPTION
PFC MINI 18 Pin Housing
SxJ1 (18 PIN OUTPUT, REMOTE SENSE
AND TRIM PIN CONNECTOR)
MATING CONNECTOR:
18 PIN HOUSING: MOLEX (39-01-2180)
TERMINAL FEMALE CRIMP 18-24 AWG: MOLEX 39-00-0039)
USE CRIMP TOOL: MOLEX (11-01-0197)
The following accessories are available for the LoPAC:
Connector Kits
A complete set of mating hardware for all combinations of input &
output connections
• PFC Mini 19-130047
• PFC Micro & PFC MicroS 19-130044
Current-Share Boards
Used for current sharing between identical LoPAC Models
for increased output power or redundancy
• LoPACs with VI-200™/VI-J00™ Modules CSB01
• LoPACs with Maxi, Mini, Micro Modules CSB02
Output Connections for the PFC Mini, PFC Micro and PFC MicroS
LoPAC Accessories
LoPAC™ Family Rev 2.5
Page 9 of 9 02/2018
LoPAC™ PFC Mini™, PFC Micro™, PFC MicroS™
Contact Us: http://www.vicorpower.com/contact-us
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
www.vicorpower.com
email
Customer Service: custserv@vicorpower.com
Technical Support: apps@vicorpower.com
Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC modules and
accessory components, fully configurable AC-DC and DC-DC power supplies, and complete custom
power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor
makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication. Vicor reserves
the right to make changes to any products, specifications, and product descriptions at any time without notice. Information published by
Vicor has been checked and is believed to be accurate at the time it was printed; however, Vicor assumes no responsibility for inaccuracies.
Testing and other quality controls are used to the extent Vicor deems necessary to support Vicor’s product warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
Specifications are subject to change without notice.
Visit http://www.vicorpower.com/lopac for the latest product information.
Vicor’s Standard Terms and Conditions and Product Warranty
All sales are subject to Vicor’s Standard Terms and Conditions of Sale, and Product Warranty which are available on Vicor’s webpage
(http://www.vicorpower.com/termsconditionswarranty) or upon request.
Life Support Policy
VICOR’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF VICOR CORPORATION. As used
herein, life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and
whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to
result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform
can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. Per Vicor Terms
and Conditions of Sale, the user of Vicor products and components in life support applications assumes all risks of such use and indemnifies
Vicor against all liability and damages.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent applications) relating to the
products described in this data sheet. No license, whether express, implied, or arising by estoppel or otherwise, to any intellectual property
rights is granted by this document. Interested parties should contact Vicor’s Intellectual Property Department.
©2017 – 2018 Vicor Corporation. All rights reserved. The Vicor name is a registered trademark of Vicor Corporation.
All other trademarks, product names, logos and brands are property of their respective owners.
