EEU-FM1V102 - PANASONIC ELECTRONIC COMPONENTS

 EE79 

Aluminum Electrolytic Capacitors/ FM

Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase

and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006

-40 to + 105°C

6.3 to 50 V .DC

22 to 6800 µ F

±20 % (120Hz/+20°C)

Japan

Malaysia

China

Low impedance (40 to 70% less than FC Series)

Endurance : 2000 to 7000 hours at +105°C

RoHS directive compliant

Radial Lead Type

n Features

Category temp. range

Rated W.V. Range

Nominal Cap. Range

n Specifications

DC Leakage Current

Capacitance Tolerance

I < 0.01 CV (µA)

after 2 minutes application of rated working voltage at +20°C

After following life test with DC voltage and +105±2°C ripple current value applied (The sum of

DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall

meet the limits specified below.

Add 0.02 per 1000µF for products of 1000µF or more.

Series: Type :A

W.V. 6.3 10 16 25 35 50

tan δ 0.22 0.19 0.16 0.14 0.12 0.10 (max.) (120Hz/+20C°)

tan δ

Country of Origin

L<16:L+1.5max

φd±0.05

14 min 3 min φD+0.5 max

φ10<

P±0.5

φD+0.5 max

φ8>

P±0.5

L>20:L+2.0 max

Sleeve

Vent

n Dimensions in mm (not to scale)

Body Dia. φD

Body Length L

Lead Dia. φd

Lead space P

0.5 0.5 0.6 0.6 0.6 0.8 0.8

2 2.5 3.5 5.0 5.0 5.0 7.5

5 6.3 8 10 12.5 16

12.5 to 25 30 to 35

(mm)

60 120 1k

10k

100k

6.3 to 50 22 to 33

47 to 330

390 to 1000

1200 to 6800

n Frequency correction factor for ripple current

W.V.(V.DC) Capacitance

(µF)

Frequency(Hz)

0.45

0.60

0.65

0.75

0.55

0.70

0.75

0.80

0.75

0.85

0.90

0.95

0.90

0.95

0.98

1.00

Endurance

Shelf Life

Duration

φ5 to φ6.3: 2000 hours, φ8×11.5 to φ8×15: 3000 hours

φ8×20 to φ10×16: 4000 hours, φ10×20 to φ12.5×20/ φ16×20: 5000 hours

φ12.5×25 to φ12.5×35/ φ16×25: 7000 hours

Capacitance change

tan δ

DC leakage current

±25% of initial measured value (6.3V to10V:±30%)

< 200 % of initial specified value

< initial specified value

After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized

at +20 °C, capacitor shall meet the limits specified in Endurance.(With voltage treatment)

Aluminum Electrolytic Capacitors/ FM

 EE80 

Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase

and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006

n Case size VS Impedance

W.V.(V.DC)

+20°C -10°C

Case size

(φD×L)

5 11 0.300 1.000 280 0.340 1.130 250

6.3 11.2 0.130 0.430 455 0.140 0.460 405

8 11.5 0.056 0.168 950 0.061 0.183 870

8 15 0.041 0.123 1240 0.045 0.135 1140

8 20 0.030 0.090 1560 0.033 0.099 1430

10 12.5 0.038 0.114 1290 0.042 0.126 1170

10 16 0.026 0.078 1790 0.030 0.090 1650

10 20 0.019 0.057 2180 0.023 0.069 1890

10 25 0.018 0.054 2470 0.022 0.066 2150

12.5 20 0.018 0.045 2600 0.022 0.055 2260

12.5 25 0.015 0.038 3190 0.018 0.045 2660

12.5 30 0.013 0.033 3630 0.016 0.040 3160

12.5 35 0.012 0.030 3750 0.014 0.035 3270

16 20 0.017 0.043 3300 0.019 0.048 2870

16 25 0.014 0.035 3820 0.016 0.040 3320

Impedance

(Ω /100kHz)

Ripple current

(mA.rms./100kHz)

+105°C

Ripple current

(mA.rms./100kHz)

Impedance

(Ω /100kHz)

+20°C -10°C +105°C

6.3 to 35 50

 EE81 

Aluminum Electrolytic Capacitors/ FM

Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase

and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006

n Standard Products

When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, 7.5mm.

The taping dimensions are explained on p.196 of our Catalog. Please use it as a reference guide.

(mm) (mm) (mm) (pcs) (pcs)(µF) (mm) (mm)

(mA) (Ω)(V) (hours) (mm)

150 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM0J151 ( ) 200 2000

330 6 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM0J331 ( ) 200 2000

560 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM0J561 ( ) 200 1000

820 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM0J821L( ) 200 1000

1200 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM0J122L( ) 200 1000

1000 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM0J102 ( ) 200 500

1200 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM0J122 ( ) 200 500

1500 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM0J152 ( ) 200 500

2200 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM0J222L( ) 200 500

3300 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM0J332 ( ) 200 500

3900 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM0J392 ( ) 200 500

4700 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM0J472L 100

5600 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM0J562L 100

16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM0J562S( ) 100 250

6800 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM0J682 ( ) 100 250

100 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1A101 ( ) 200 2000

220 6 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1A221 ( ) 200 2000

470 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1A471 ( ) 200 1000

680 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1A681L( ) 200 1000

1000 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1A102L( ) 200 1000

680 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1A681 ( ) 200 500

1000 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1A102 ( ) 200 500

1200 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1A122 ( ) 200 500

1500 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1A152L( ) 200 500

2200 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1A222 ( ) 200 500

3300 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1A332 ( ) 200 500

3900 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1A392L 100

4700 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1A472L 100

3900 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1A392S( ) 100 250

5600 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1A562 ( ) 100 250

68 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1C680 ( ) 200 2000

120 6 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1C121 ( ) 200 2000

330 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1C331 ( ) 200 1000

470 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1C471L( ) 200 1000

680 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1C681L( ) 200 1000

470 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1C471 ( ) 200 500

680 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1C681 ( ) 200 500

1000 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1C102 ( ) 200 500

1200 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1C122L( ) 200 500

1500 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1C152 ( ) 200 500

W.V. Cap

(±20%)

Case size

Dia. Length Ripple

current

(100kHz)

(+105°C)

Impedance

(100kHz)

(+20°C)

Endur-

ance

Specification Lead size

Lead

Dia.

Lead space

Straight Taping

i Bi H

Part No

Min.Packaging Qíty

Long

Lead

Taping

6.3

Aluminum Electrolytic Capacitors/ FM

 EE82 

Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase

and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006

n Standard Products

When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, 7.5mm.

The taping dimensions are explained on p.196 of our Catalog. Please use it as a reference guide.

(mm) (mm) (mm) (pcs) (pcs)

(µF) (mm) (mm)

(mA) (Ω)(V) (hours) (mm)

2200 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1C222 ( ) 200 500

2700 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1C272L 100

3300 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1C332L 100

2700 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1C272S( ) 100 250

3900 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1C392 ( ) 100 250

47 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1E470 ( ) 200 2000

100 6 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1E101 ( ) 200 2000

220 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1E221 ( ) 200 1000

330 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1E331L( ) 200 1000

470 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1E471L( ) 200 1000

330 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1E331 ( ) 200 500

470 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1E471 ( ) 200 500

680 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1E681 ( ) 200 500

820 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1E821L( ) 200 500

1000 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1E102 ( ) 200 500

1500 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1E152 ( ) 200 500

1800 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1E182L 100

2200 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1E222L 100

1800 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1E182S( ) 100 250

2700 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1E272 ( ) 100 250

33 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1V330 ( ) 200 2000

68 6 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1V680 ( ) 200 2000

150 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1V151 ( ) 200 1000

220 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1V221L( ) 200 1000

330 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1V331L( ) 200 1000

220 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1V221 ( ) 200 500

330 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1V331 ( ) 200 500

470 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1V471 ( ) 200 500

560 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1V561L( ) 200 500

680 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1V681 ( ) 200 500

1000 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1V102 ( ) 200 500

1200 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1V122L 100

1500 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1V152L 100

1200 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1V122S( ) 100 250

1800 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1V182 ( ) 100 250

22 5 11 250 0.340 2000 0.5 2.0 5.0 2.5 EEUFM1H220 ( ) 200 2000

56 6 11.2 405 0.140 2000 0.5 2.5 5.0 2.5 EEUFM1H560 ( ) 200 2000

100 8 11.5 870 0.061 3000 0.6 3.5 5.0 EEUFM1H101 ( ) 200 1000

120 8 15 1140 0.045 3000 0.6 3.5 5.0 EEUFM1H121L( ) 200 1000

180 8 20 1430 0.033 4000 0.6 3.5 5.0 EEUFM1H181L( ) 200 1000

W.V. Cap

(±20%)

Case size

Dia. Length Ripple

current

(100kHz)

(+105°C)

Impedance

(100kHz)

(+20°C)

Endur-

ance

Specification Lead size

Lead

Dia.

Lead space

Straight Taping

i Bi H

Part No

Min.Packaging Qíty

Long

Lead

Taping

 EE83 

Aluminum Electrolytic Capacitors/ FM

Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase

and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006

n Standard Products

When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, 7.5mm.

The taping dimensions are explained on p.196 of our Catalog. Please use it as a reference guide.

(mm) (mm) (mm) (pcs) (pcs)(µF) (mm) (mm)

(mA) (Ω)

(V) (hours) (mm)

150 10 12.5 1170 0.042 4000 0.6 5.0 5.0 EEUFM1H151 ( ) 200 500

220 10 16 1650 0.030 4000 0.6 5.0 5.0 EEUFM1H221 ( ) 200 500

270 10 20 1890 0.023 5000 0.6 5.0 5.0 EEUFM1H271 ( ) 200 500

330 10 25 2150 0.022 5000 0.6 5.0 5.0 EEUFM1H331L( ) 200 500

470 12.5 20 2260 0.022 5000 0.6 5.0 5.0 EEUFM1H471 ( ) 200 500

560 12.5 25 2660 0.018 7000 0.6 5.0 5.0 EEUFM1H561 ( ) 200 500

680 12.5 30 3160 0.016 7000 0.8 5.0 EEUFM1H681L 100

820 12.5 35 3270 0.014 7000 0.8 5.0 EEUFM1H821L 100

16 20 2870 0.019 5000 0.8 7.5 7.5 EEUFM1H821S( ) 100 250

1000 16 25 3320 0.016 7000 0.8 7.5 7.5 EEUFM1H102 ( ) 100 250

W.V. Cap

(±20%)

Case size

Dia. Length Ripple

current

(100kHz)

(+105°C)

Imped-

ance

(100kHz)

(+20°C)

Endur-

ance

Specification Lead size

Lead

Dia.

Lead space

Straight Taping

i Bi H

Part No

Min.Packaging Qíty

Long

Lead

Taping